Examples

1. Use one of the following commands to acquire information about an AppleTalk interface:

   ddpinfo ddpinfo -i

   Sample Output:

   Port 0:
   	name: 11c2:66
   	hw addr: 0800 6902 7a4e
   	appletalk addr: 1079/154 (0x437/0x9a)
   	ipkts/opkts 26579/2220, ierrs/oerrs 5/0

2. Use the following command to receive a detailed breakdown of errors:

   ddpinfo -x

   Sample Output:

   Port 0:
   	name: 11c2:66
   	hw addr: 0800 6902 7a4e
   	appletalk addr: 1079/154 (0x437/0x9a)
   	ipkts/opkts 26579/2220, ierrs/oerrs 5/0
   Error breakdown:
   	fragment: 0
   	short packet: 0
   	too many hops: 0
   	indirect broadcast: 0
   	unreachable network: 1
   	inactive protocol type: 4
   	user queue closed: 0
   	no memory on input: 0
   	badly formatted aarp packet: 0
   	badly formatted ddp packet: 0
   	dropped due to full queue: 0
   	dropped due to full interface: 0
   	output data link: 0
   	interface unlinked: 0
   	no memory on output: 0
   	no output ddp stream: 0
   	no output aarp stream: 0

3. Use the following command to acquire user information:

   ddpinfo -u

   Sample Output:

   Upper stream minor device 0:
   	Protocol type 6
   	ipkts/opkts 72/3, ierrs/oerrs 0/0
   Upper stream minor device 1:
   	Protocol type 3
   	ipkts/opkts 0/0, ierrs/oerrs 0/0
   Upper stream minor device 2:
   	Protocol type 1
   	ipkts/opkts 23817/0, ierrs/oerrs 0/0
   Upper stream minor device 3:
   	Protocol type 2
   	ipkts/opkts 2769/2203, ierrs/oerrs 0/0
   Upper stream minor device 4:
   	Protocol type 4
   	ipkts/opkts 0/0, ierrs/oerrs 0/0
   Upper stream minor device 5:
   	Protocol type 0
   	ipkts/opkts 0/0, ierrs/oerrs 0/0

4. Use the following command to acquire the network number and port number, or the route and router address:

   ddpinfo -r

Sample Output: