This chapter discusses the input/output features provided by Sun Fortran compilers.
Data is transferred between the program and devices or files through a Fortran logical unit. Logical units are identified in an I/O statement by a logical unit number, a nonnegative integer from 0 to the maximum 4-byte integer value (2,147,483,647).
The character * can appear as a logical unit identifier. The asterisk stands for standard input file when it appears in a READ statement; it stands for standard output file when it appears in a WRITE or PRINT statement.
A Fortran logical unit can be associated with a specific, named file through the OPEN statement. Also, certain "preconnected" units are automatically associated with specific files at the start of program execution.
The OPEN statement's FILE= specifier establishes the association of a logical unit to a named, physical file at runtime. This file can be pre-existing or created by the program. See the Sun FORTRAN 77 Language Reference Manual for a full discussion of the OPEN statement.
The FILE= specifier on an OPEN statement may specify a simple file name (FILE='myfile.out') or a file name preceded by an absolute or relative directory path (FILE='../Amber/Qproj/myfile.out'). Also, the specifier may be a character constant, variable, or character expression.
Library routines can be used to bring command-line arguments and environment variables into the program as character variables for use as file names in OPEN statements. (See man page entries for getarg(3F) and getenv(3F) for details; these and other useful library routines are also described in the Fortran Library Reference).
The following example (GetFilNam.f) shows one way to construct an absolute path file name from a typed-in name. The program uses the library routines GETENV, LNBLNK, and GETCWD to return the value of the $HOME environment variable, find the last non-blank in the string, and determine the current working directory:
CHARACTER F*128, FN*128, FULLNAME*128 PRINT*, 'ENTER FILE NAME:' READ *, F FN = FULLNAME( F ) PRINT *, 'PATH IS: ',FN END CHARACTER*128 FUNCTION FULLNAME( NAME ) CHARACTER NAME*(*), PREFIX*128 C This assumes C shell. C Leave absolute path names unchanged. C If name starts with '~/', replace tilde with home C directory; otherwise prefix relative path name with C path to current directory. IF ( NAME(1:1) .EQ. '/' ) THEN FULLNAME = NAME ELSE IF ( NAME(1:2) .EQ. '~/' ) THEN CALL GETENV( 'HOME', PREFIX ) FULLNAME = PREFIX(:LNBLNK(PREFIX)) // & NAME(2:LNBLNK(NAME)) ELSE CALL GETCWD( PREFIX ) FULLNAME = PREFIX(:LNBLNK(PREFIX)) // & '/' // NAME(:LNBLNK(NAME)) ENDIF RETURN END
Compiling and running GetFilNam.f results in:
demo% pwd /home/users/auser/subdir demo% f77 -silent -o getfil GetFilNam.f demo% getfil anyfile /home/users/auser/subdir/anyfile demo%
The OPEN statement need not specify a name; the runtime system supplies a file name according to several conventions.
Specifying STATUS='SCRATCH' in the OPEN statement opens a file with a name of the form tmp.FAAAxnnnnn, where nnnnn is replaced by the current process ID, AAA is a string of three characters, and x is a letter; the AAA and x make the file name unique. This file is deleted upon termination of the program or execution of a CLOSE statement, unless (with f77) STATUS='KEEP' is specified in the CLOSE statement.
If the file has already been opened by the program, you can use a subsequent OPEN statement to change some of the file's characteristics; for example, BLANK and FORM. In this case, you would specify only the file's logical unit number and the parameters to change.
Three unit numbers are automatically associated with specific standard I/O files at the start of program execution. These preconnected units are standard input, standard output, and standard error:
Standard input is logical unit 5 (also Fortran 90 unit 100)
Standard output is logical unit 6 (also Fortran 90 unit 101)
Standard error is logical unit 0 (also Fortran 90 unit 102)
Typically, standard input receives input from the workstation keyboard; standard output and standard error display output on the workstation screen.
In all other cases where a logical unit number but no FILE= name is specified on an OPEN statement, a file is opened with a name of the form fort.n, where n is the logical unit number.
Use of the OPEN statement is optional in those cases where default conventions can be assumed. If the first operation on a logical unit is an I/O statement other than OPEN or INQUIRE, the file fort.n is referenced, where n is the logical unit number (except for 0, 5, and 6, which have special meaning).
These files need not exist before program execution. If the first operation on the file is not an OPEN or INQUIRE statement, they are created.
Example: The WRITE in the following code creates the file fort.25 if it is the first input/output operation on that unit:
demo% cat TestUnit.f IU=25 WRITE( IU, '(I4)' ) IU END demo%
The preceding program opens the file fort.25 and writes a single formatted record onto that file:
demo% f77 -silent -o testunit TestUnit.f demo% testunit demo% cat fort.25 25 demo%
The file system does not have any automatic facility to associate a logical unit number in a Fortran program with a physical file.
However, there are several satisfactory ways to communicate file names to a Fortran program.
The library routine getarg(3F) can be used to read the command-line arguments at runtime into a character variable. The argument is interpreted as a file name and used in the OPEN statement FILE= specifier:
demo% cat testarg.f CHARACTER outfile*40 C Get first arg as output file name for unit 51 CALL getarg(1,outfile) OPEN(51,FILE=outfile) WRITE(51,*) 'Writing to file: ', outfile END demo% f77 -silent -o tstarg testarg.f demo% tstarg AnyFileName demo% cat AnyFileName Writing to file: AnyFileName demo%
Similarly, the library routine getenv(3F) can be used to read the value of any environment variable at runtime into a character variable that in turn is interpreted as a file name:
demo% cat testenv.f CHARACTER outfile*40 C Get $OUTFILE as output file name for unit 51 CALL getenv('OUTFILE',outfile) OPEN(51,FILE=outfile) WRITE(51,*) 'Writing to file: ', outfile END demo% f77 -silent -o tstenv testenv.f demo% setenv OUTFILE EnvFileName demo% tstenv demo% cat EnvFileName Writing to file: EnvFileName demo%
When using getarg or getenv, care should be taken regarding leading or trailing blanks. (FORTRAN 77 programs can use the library function LNBLNK; Fortran 90 programs can use the intrinsic function TRIM.) Additional flexibility to accept relative path names can be programmed along the lines of the FULLNAME function in the example at the beginning of this chapter.
The library routine IOINIT can also be used with f77 to attach logical units to specific files at runtime. IOINIT looks in the environment for names of a user-specified form and then opens the corresponding logical unit for sequential formatted I/O. Names must be of the general form PREFIXnn, where the particular PREFIX is specified in the call to IOINIT, and nn is the logical unit to be opened. Unit numbers less than 10 must include the leading 0. See the Sun Fortran Library Reference, and the IOINIT(3F) man page. (The IOINIT facility is not implemented for f90.)
Example: Associate physical files test.inp and test.out in the current directory to logical units 1 and 2:
First, set the environment variables.
demo$ TST01=ini1.inp demo$ TST02=ini1.out demo$ export TST01 TST02
demo% setenv TST01 ini1.inp demo% setenv TST02 ini1.out
demo% cat ini1.f CHARACTER PRFX*8 LOGICAL CCTL, BZRO, APND, VRBOSE DATA CCTL, BZRO, APND, PRFX, VRBOSE & /.TRUE.,.FALSE.,.FALSE., 'TST',.FALSE. / CALL IOINIT( CCTL, BZRO, APND, PRFX, VRBOSE ) READ(1, *) I, B, N WRITE(2, *) I, B, N END demo%
With environment variables and ioinit, ini1.f reads ini1.inp and writes to ini1.out:
demo% cat ini1.inp 12 3.14159012 6 demo% f77 -silent -o tstinit ini1.f demo% tstinit demo% cat ini1.out 12 3.14159 6 demo%
IOINIT is adequate for most programs as written. However, it is written in Fortran specifically to serve as an example for similar user-supplied routines. Retrieve a copy from the following file, a part of the FORTRAN 77 package installation: /opt/SUNWspro/SC5.0/src/ioinit.f
Another way to associate a physical file with a program's logical unit number is by redirecting or piping the preconnected standard I/O files. Redirection or piping occurs on the runtime execution command.
In this way, a program that reads standard input (unit 5) and writes to standard output (unit 6) or standard error (unit 0) can, by redirection (using <, >, >>, >&, |, |&, 2>, 2>&1 on the command line), read or write to any other named file.
This is shown in the following table:
Table 2-1 csh/sh/ksh Redirection and Piping on the Command Line
Action |
Using C Shell |
Using Bourne or Korn Shell |
---|---|---|
Standard input --read from mydata | myprog < mydata | myprog < mydata |
Standard output --write (overwrite) myoutput | myprog > myoutput | myprog > myoutput |
Standard output -- write/append to myoutput | myprog >> myoutput | myprog >> myoutput |
Redirect standard error to a file | myprog >& errorfile | myprog 2> errorfile |
Pipe standard output to input of another program | myprog1 | myprog2 | myprog1 | myprog2 |
Pipe standard error and output to another program | myprog1 |& myprog2 | myprog1 2>&1 | myprog2 |
See the csh, ksh,and sh man pages for details on redirection and piping on the command line.
If you are porting from VMS FORTRAN to FORTRAN 77, the VMS-style logical file names in the INCLUDE statement are mapped to UNIX path names. The environment variable LOGICALNAMEMAPPING defines the mapping between the logical names and the UNIX path name. If the environment variable LOGICALNAMEMAPPING is set and the -vax, -xl or -xld compiler options are used, the compiler interprets VMS logical file names on the INCLUDE statement.
The compiler sets the environment variable to a string with the following syntax:
"lname1=path1; lname2=path2; "
Each lname is a logical name, and each path is the path name of a directory (without a trailing /). All blanks are ignored when parsing this string. Any trailing /list or /nolist is stripped from the file name in the INCLUDE statement. Logical names in a file name are delimited by the first colon in the VMS file name. The compiler converts file names of the form:
lname1:file
path1/file
Uppercase and lowercase are significant in logical names. If a logical name is encountered on the INCLUDE statement that was not specified by LOGICALNAMEMAPPING, the file name is used unchanged.
Direct or random I/O allows you to access a file directly by record number. Record numbers are assigned when a record is written. Unlike sequential I/O, direct I/O records can be read and written in any order. However, in a direct access file, all records must be the same fixed length. Direct access files are declared with the ACCESS='DIRECT' specifier on the OPEN statement for the file.
A logical record in a direct access file is a string of bytes of a length specified by the OPEN statement's RECL= specifier. READ and WRITE statements must not specify logical records larger than the defined record size. (Record sizes are specified in bytes.) Shorter records are allowed. Unformatted, direct writes leave the unfilled part of the record undefined. Formatted, direct writes cause the unfilled record to be padded with blanks.
Direct access READ and WRITE statements have an extra argument, REC=n, to specify the record number to be read or written.
Example: Direct access, unformatted:
OPEN( 2, FILE='data.db', ACCESS='DIRECT', RECL=200, & FORM='UNFORMATTED', ERR=90 ) READ( 2, REC=13, ERR=30 ) X, Y
This program opens a file for direct access, unformatted I/O, with a fixed record length of 200 bytes, then reads the thirteenth record into X and Y.
Example: Direct access, formatted:
OPEN( 2, FILE='inven.db', ACCESS='DIRECT', RECL=200, & FORM='FORMATTED', ERR=90 ) READ( 2, FMT='(I10,F10.3)', REC=13, ERR=30 ) X, Y
This program opens a file for direct access, formatted I/O, with a fixed record length of 200 bytes. It then reads the thirteenth record and converts it with the format (I10,F10.3).
For formatted files, the size of the record written is determined by the FORMAT statement. In the preceding example, the FORMAT statement defines a record of 20 characters or bytes. More than one record can be written by a single formatted write if the amount of data on the list is larger than the record size specified in the FORMAT statement. In such a case, each subsequent record is given successive record numbers.
Example: Direct access, formatted, multiple record write:
OPEN( 21, ACCESS='DIRECT', RECL=200, FORM='FORMATTED') WRITE(21,'(10F10.3)',REC=11) (X(J),J=1,100)
The write to direct access unit 21 creates 10 records of 10 elements each (since the format specifies 10 elements per record) these records are numbered 11 through 20.
An internal file is an object of type CHARACTER such as a variable, substring, array, element of an array, or field of a structured record. Internal file READ can be from a constant character string. I/O on internal files simulates formatted READ and WRITE statements by transferring and converting data from one character object to another data object. No file I/O is performed.
When using internal files:
The name of the character object receiving the data appears in place of the unit number on a WRITE statement. On a READ statement, the name of the character object source appears in place of the unit number.
A constant, variable, or substring object constitutes a single record in the file.
With an array object, each array element corresponds to a record.
f77: f77 extends direct I/O to internal files. (The ANSI standard includes only sequential formatted I/O on internal files.) This is similar to direct I/O on external files, except that the number of records in the file cannot be changed. In this case, a record is a single element of an array of character strings.
Each sequential READ or WRITE statement starts at the beginning of an internal file.
Example: Sequential formatted read from an internal file (one record only):
demo% cat intern1.f CHARACTER X*80 READ( *, '(A)' ) X READ( X, '(I3,I4)' ) N1, N2 ! This codeline reads the internal file X WRITE( *, * ) N1, N2 END demo% f77 -silent -o tstintern intern1.f demo% tstintern 12 99 12 99 demo%
Example: Sequential formatted read from an internal file (three records):
demo% cat intern2.f CHARACTER LINE(4)*16 ! This is our "internal file" * 12341234 DATA LINE(1) / ' 81 81 ' / DATA LINE(2) / ' 82 82 ' / DATA LINE(3) / ' 83 83 ' / DATA LINE(4) / ' 84 84 ' / READ( LINE,'(2I4)') I,J,K,L,M,N PRINT *, I, J, K, L, M, N END demo% f77 -silent intern2.f demo% a.out 81 81 82 82 83 83 demo%
Example: Direct access read from an internal file (one record) (f77 only):
demo% cat intern3.f CHARACTER LINE(4)*16 ! This is our "internal file" * 12341234 DATA LINE(1) / ' 81 81 ' / DATA LINE(2) / ' 82 82 ' / DATA LINE(3) / ' 83 83 ' / DATA LINE(4) / ' 84 84 ' / READ ( LINE, FMT=20, REC=3 ) M, N 20 FORMAT( I4, I4 ) PRINT *, M, N END demo% f77 -silent intern3.f demo% a.out 83 83 demo%
Most typical Fortran I/O is done to disk files. However, by associating a logical unit number to a physically mounted tape drive via the OPEN statement, it is possible to do I/O directly to tape.
It could be more efficient to use the TOPEN() routines rather than Fortran I/O statements to do I/O on magnetic tape.
With the nonstandard tape I/O package (see topen(3F)) you can transfer blocks between the tape drive and buffers declared as Fortran character variables. You can then use internal I/O to fill and empty these buffers. This facility does not integrate with the rest of Fortran I/O and even has its own set of tape logical units. Refer to the man pages for complete information.
The Fortran I/O statements provide facilities for transparent access to formatted, sequential files on magnetic tape. There is no limit on formatted record size, and records may span tape blocks.
Using the Fortran I/O statements to connect a magnetic tape for unformatted access is less satisfactory. The implementation of unformatted records implies that the size of a record (plus eight characters of overhead) cannot be bigger than the buffer size.
As long as this restriction is complied with, the I/O system does not write records that span physical tape blocks, writing short blocks when necessary. This representation of unformatted records is preserved (even though it is inappropriate for tapes) so that files can be freely copied between disk and tapes.
Since the block-spanning restriction does not apply to tape reads, files can be copied from tape to disk without any special considerations.
A Fortran data file is represented on tape by a sequence of data records followed by an endfile record. The data is grouped into blocks, with maximum block size determined when the file is opened. The records are represented in the same way as records in disk files: formatted records are followed by newlines; unformatted records are preceded and followed by character counts. In general, there is no relation between Fortran records and tape blocks; that is, records can span blocks, which can contain parts of several records.
The only exception is that Fortran does not write an unformatted record that spans blocks; thus, the size of the largest unformatted record is eight characters less than the block size.
An end-of-file record in Fortran maps directly into a tape mark. In this respect, Fortran files are the same as tape system files. But since the representation of Fortran files on tape is the same as that used in the rest of UNIX, naive Fortran programs cannot read 80-column card images on tape. If you have an existing Fortran program and an existing data tape to read with it, translate the tape using the dd(1) utility, which adds newlines and strips trailing blanks.
Example: Convert a tape on mt0 and pipe that to the executable ftnprg:
demo% dd if=/dev/rmt0 ibs=20b cbs=80 conv=unblock | ftnprg
As an alternative to dd, you can call the getc(3F) library routine to read characters from the tape. You can then combine the characters into a character variable and use internal I/O to transfer formatted data. See also TOPEN(3F).
The end-of-file condition is reached when an end-of-file record is encountered during execution of a READ statement. The standard states that the file is positioned after the end-of-file record. In real life, this means that the tape read head is poised at the beginning of the next file on the tape. Although it seems as if you could read the next file on the tape, this is not strictly true, and is not covered by the ANSI FORTRAN 77 Language Standard.
The standard also says that a BACKSPACE or REWIND statement can be used to reposition the file. Consequently, after reaching end-of-file, you can backspace over the end-of-file record and further manipulate the file-for example, writing more records at the end, rewinding the file, and rereading or rewriting it.
The name used to open the tape file determines certain characteristics of the connection, such as the recording density and whether the tape is automatically rewound when opened and closed.
To access a file on a tape with multiple files, first use the mt(1) utility to position the tape to the needed file. Then open the file as a no-rewind magnetic tape such as /dev/nrmt0. Referencing the tape with this name prevents it from being repositioned when it is closed. By reading the file until end-of-file and then reopening it, a program can access the next file on the tape. Any program subsequently referencing the same tape can access it where it was last left, preferably at the beginning of a file, or past the end-of-file record.
However, if your program terminates prematurely, it may leave the tape positioned anywhere. Use the SunOS mt(1) command to reposition the tape appropriately.
Fortran 90 2.0 and FORTRAN 77 5.0 are I/O compatible. Executables containing intermixed f77 and f90 compilations can do I/O to the same unit from both the f77 and f90 parts of the program.
However, Fortran 90 provides some additional features:
A file opened with FORM='BINARY' enables nonstandard I/O of raw data without record marks. This has nearly the same effect as FORM='UNFORMATTED', except that no record lengths are embedded in the file. As a result, it is not possible to backspace a FORM='BINARY' file. A READ statement on such a 'BINARY' file reads as much data as needed to fill all the variables on the input list.
ADVANCE='NO' enables nonadvancing I/O, as in:
write(*,'(a)',ADVANCE='NO') 'Enter size= ' read(*,*) n
NAMELIST input features:
f90 allows the group name to be preceded by $ or & on input. The Fortran 90 standard accepts only & and this is what a NAMELIST write outputs.
f90 accepts $ as the symbol terminating an input group unless the last data item in the group is CHARACTER, in which case the $ is treated as input data.
f90 allows NAMELIST input to start in the first column of a record.
ENCODE and DECODE are recognized and implemented by f90 just as they are by f77.