Netra j 3.0 Product Notes

Before Installation or Upgrade

Read this section before installing or upgrading to the Netra j 3.0 software.

Upgrading Printer Administration

If you are upgrading from the Solaris(TM) 2.5.1 to the Solaris 2.6 operating environment, and printer configuration information resides on the system being upgraded, you must convert the Solaris 2.5.1 LP configuration to the format that is used by the Solaris 2.6 LP print services. If you don't, the printers on the Solaris 2.6 system may not be configured correctly.

To Convert the LP Configuration

Upgrade to the Solaris 2.6 operating environment.

As superuser, open a shell window and run the following script:
```
# /usr/lib/print/conv_lp
```
This script constructs the /etc/printers.conf file from the contents of the /etc/lp/printers directory.

Downloading Localized Netra j 3.0 Software

The Netra j 3.0 Installation Guide describes which files to download from the e-commerce site for an English locale installation or upgrade. File names for non-English locales are provided in the following paragraphs.

For any non-English locale, you need the following files:

netraj30file_1lo.bin
netraj30file_2lo.bin
netraj30file_3lo.bin
netraj30file_4lo.bin
netraj30_L10N1.bin
netraj30_L10N2.bin
netraj30_common1.bin
netraj30_common2.bin

If you are using the Solaris 2.5.1 operating environment, you need these files:

solaris251addonslo.bin
solaris251addonsL10N.bin

If you are using the Solaris 2.6 operating environment, you need these files:

solaris26addonslo.bin
solaris26addonsL10N.bin

Refer to the Netra j 3.0 Installation Guide for un-archiving, installation, and upgrade instructions. During the installation or upgrade, you are asked which locale to configure the Netra j 3.0 server software, and which locale to configure the Netra j 3.0 client software to. Select the most appropriate locales.

Solaris 2.5.1 Year 2000 Compliance

To ensure year 2000 compliance of the Netra j 3.0 software when installed on a Solaris 2.5.1 system, you must install the Solaris Year 2000 Patch Cluster. This patch cluster is provided with the Netra j 3.0 software in the y2000/2.5.1_y2000 directory of the installation medium.

To Install the Y2000 Patch Cluster

As superuser, open a shell window and change to the y2000/2.5.1_y2000 directory.

If you downloaded the Netra j 3.0 software from the Web, type:
```
# cd /download_directory/y2000/2.5.1_y2000
```
If you are installing the patch cluster from a CD, type:
```
# cd /cdrom/cdrom0/y2000/2.5.1_y2000
```

Install the patch cluster using the installation script:
```
# ./install_cluster
```

Additional information regarding the patch cluster is provided in the y2000/2.5.1_y2000.README file.