Restarting or Rebooting the System After Installation

At the end of the SEAS installation, you may be prompted to reboot if you installed SEAM 1.0 or JDK 1.1.7. When you choose to reboot now, the system closes all open files and then reboots the system automatically. If you choose to reboot later, use one of the following rebooting procedures. The rebooting commands are typed at the ok SPARC system PROM prompt. If the PROM prompt is >, type n to display ok. You must be root to execute a reboot. If necessary, in a terminal window at the system prompt, type su and then enter the root password.

How to Reboot the System in Multi-User State

1. In a terminal window, type the following command:

   halt

2. At the ok prompt, type the following command:

   boot

3. Log in as usual.

How to Reboot the System in Single-User State

1. In a terminal window, type the following command:

   halt

2. At the ok prompt, type the following command:

   boot -s

   The system responds with the following message:

   INIT: SINGLE USER MODE Type Ctrl-D to proceed with normal start-up, (or give root password for system maintenance)

3. If you want to reboot in multi-user mode, press Ctrl-D.

4. Type the root password and press Return.