12.2.2 How to Repair a Lost Sun StorEdge MultiPack or Sun StorEdge D1000 Connection

1. Prepare the Sun Cluster system for component replacement.

   Depending on the cause of the connection loss, prepare the Sun Cluster node with one of the following procedures.

   • If the failed component is an SBus card, see Chapter 7, Administering Server Components, to prepare the Sun Cluster node for power down.

   • If the problem is a bad SCSI-2 cable, the volume management software will have detected the problem and prepared the system for cable replacement.

2. Replace the failed component.

   If the SCSI-2 cable or SBus card fails, refer to the service manual for your Sun Cluster node for detailed instructions on replacing them.

3. Recover from volume management software errors.

   Use the procedures described in "12.1 Recovering From Power Loss".