2.2.14 Planning for Problem Resolution

The following files should be saved after the system is configured and running. In the unlikely event that the cluster should experience problems, these files can help service providers debug and solve cluster problems.

• did.conf /etc

  This file contains the disk ID (DID) mappings for Solstice DiskSuite configurations. this information can be used to track and verify the correct DID configurations after a catastrophic failure on one node.

• ccd.database /etc/opt/SUNWcluster/conf

  This file contains important cluster configuration information. See the instructions for saving this file in the section on troubleshooting the CCD in the Sun Cluster 2.2 System Administration Guide.

• cluster_name.cdb /etc/opt/SUNWcluster/conf

  This file contains current information about the cluster configuration. It can be used as a reference to determine what changes have occurred since the original setup.

• metastat -s diskset_name -p > sav.diskset_name

  This command saves the current Solstice DiskSuite diskset configuration.