ssp_startup(1M)

NAME | SYNOPSIS | DESCRIPTION | FILES

NAME

ssp_startup- invoke SSP daemons

SYNOPSIS

ssp_startup

DESCRIPTION

---

Note -

Do not execute this script from the command line. The ssp_startup script is normally initiated automatically on each reboot as defined in /etc/init.d/ssp and linked to /etc/rc2.d/S99ssp

---

The ssp_startup script starts the following Sun Enterprise 10000 system daemons. These daemons must be started in the proper order for your particular configuration, which may differ from the example shown here.

• edd(1M)

• cbs(1M)

• snmpd(1M)

• machine_server(1M)

• fad(1M)

• fod(1M)

• datasyncd(1M)

• straps(1M)

• obp_helper(1M)

• netcon_server(1M)

ssp_startup then monitors and restarts them, as necessary.

When ssp_startup completes, it leaves a message similar to the following in the $SSPLOGGER/messages file:

Startup of SSP programs complete

You can use domain_create(1M) to create the domain, then execute bringup(1M) to bring it up.

FILES

The following files are supported:

$SSPETC/ssp_startup.main

Controls which programs are started during initial startup on the main SSP

$SSPETC/ssp_startup.remote

Controls which programs are started during initial startup on the spare SSP

$SSPETC/ssp_startup.restart_main

Controls which programs are monitored and restarted, if necessary, on the main SSP

$SSPETC/ssp_startup.restart_spare

Controls which programs are monitored and restarted, if necessary, on the spare SSP

NAME | SYNOPSIS | DESCRIPTION | FILES