NGDR Error: abort_attach_board: invalid board state

The attach operation could not be aborted because the board is not in the init_attach state, awaiting to be configured into the domain. 

Wait for the board to enter the init_attach state. Only then can the attach operation be aborted. 

NGDR Error: attach_finished: invalid board state

Communication protocol has been breached over the state of the attach operation. The DR driver and daemon disagree with the SSP that the board was waiting for the confirmation of the attach operation from the SSP. 

Exit and restart the current DR application, then retry the operation. If this error persists, stop and restart the DR daemon. You may need to reboot the domain to recover from this error. 

NGDR Error: Cannot abort attach. Board ineligible for further DR operations.

The board entered the FATAL state after the abort command was issued, causing the abort operation to fail and the board to be lost from the system. 

Reboot the domain. 

dr_attach: failure executing A3000 hot_add script . . . error message

The Sun(TM) StoreEdge(TM) A3000 hot_add script is executed directly after a DR attach operation. If the script exists, but it cannot be executed, the error message explains why.

If you are not using, nor plan to use, A3000 devices, you can rename the script so that it will not be found. 

initiate_attach_board: already init_attached

You attempted to initiate the attach of a board that was already initiated. 

Go to the complete attach window and continue the attach process. 

NGDR Error: complete_attach_board: invalid board state

You tried to initiate an attach operation on a board that is not eligible--the board is not in the init_attach state awaiting attachment to the domain. 

Wait for the board to enter the init_attach state. Only then can the attach operation be aborted. 

NGDR Error: initiate_attach_board: invalid board state

You tried to initiate an attach operation on a board that is not eligible--the board is not in the PRESENT state awaiting attachment to the domain. 

Wait for the board to enter the init_attach state. Only then can the attach operation be aborted. 

NGDR Error: Some devices not attached. Examine the host syslog for details . . . errno_description

Some of the devices were not configured into the domain. 

Look at the system logs for more details about what devices were not configured into the domain and why they were not configured. Some devices on the board may not be supported by the operating environment or by the DR feature. You should blacklist unsupported devices.