The following table contains the list of auto-configuration error messages that are sent to the system logs and/or to the SSP applications.
Table A-4 Auto-Configuration Error Messages
Error Message |
Probable Cause |
Suggested Action |
---|---|---|
NGDR Error: Complete pending DR operation prior to running autoconfig . . . Invalid argument |
The autoconfig(1M) command failed because a DR operation was still pending (that is, the board was not fully detached or attached before you issued the autoconfig(1M) command to reconfigure the operating environment). |
Use the showdevices(1M) command to determine the state of the board. Decide to abort or complete the pending operation before you try to use the autoconfig(1M) command to reconfigure the operating environment. |
NGDR Error: Could not get /tmp/AdDrEm.lck lock . . . errno_description |
The DR daemon failed to get the lock it needs so that it can reconfigure the operating environment. |
Check the additional errno_description and/or error number that is sent with the error message to determine why the lock could not be acquired. |
NGDR Error: Could not unlock /tmp/AdDrEm.lck lock . . . errno_description |
The DR daemon could not release the lock. |
Check the additional errno_description and/or error number that is sent with the error message to determine why the lock was not released. |
NGDR Error: devlinks cmd failed. . . error descriptions |
The devlinks(1M) command failed to reconfigure the operating environment. |
Check the additional error descriptions and/or error number that is sent with the error message to determine why the command failed. Manually run the command on the domain. |
NGDR Error: disks cmd failed . . . error descriptions |
The disks(1M) command failed to reconfigure the operating environment. |
Check the additional error descriptions and/or error number that is sent with the error message to determine why the command failed. Manually run the command on the domain. |
NGDR Error: drvconfig cmd failed. . . error description |
The drvconfig(1M) command failed to reconfigure the operating environment. |
Check the additional error description and/or error number that is sent with the error message to determine why the command failed. Manually run the command on the domain. |
NGDR Error: ports cmd failed . . . error description |
The ports(1M) command failed to reconfigure the operating environment. |
Check the additional error description and/or error number that is sent with the error message to determine why the command failed. Manually run the command on the domain. |
NGDR Error: sync cmd failed . . . error description |
The sync(1M) command failed to reconfigure the operating environment. |
Check the additional error description and/or error number that is sent with the error message to determine why the command failed. Manually run the command on the domain. |
NGDR Error: tapes cmd failed . . . error descriptions |
The tapes(1M) command failed to reconfigure the operating environment. |
Check the additional error description and/or error number that is sent with the error message to determine why the command failed. Manually run the command on the domain. |