/opt/SUNWvts/bin/ecpptest standard_arguments -o [dev=device_name] [ext_loop=Enable|Disable][printer=Enable|Disable][,data=ascii|postscript][, delay=0-86400][,dloop=Enable|Disable]
Table 16-4 ecpptest Command-Line Syntax
Argument Description |
|
---|---|
dev=device_name |
Specifies the name of the device. This should be of the form /dev/ecpp#, where # is the minor number of the device. The default device is /dev/ecpp0. |
ext_loop=Enable|Disable |
If enabled, the external loopback test is run. The external loopback plug must be attached to the printer port. |
printer=Enable|Disable |
If enabled, the printer test is run. A Centronics or ECP mode parallel port printer must be attached |
data=ascii|postscript |
Choose whether ASCII text or PostScript data is sent to the printer. A PostScript printer must be attached to print postscript data. |
delay=0-86400 |
Allows the user to choose a delay between passes of the printer test. This prevents continuous printing of data that could quickly empty the paper supply. |
dloop=Enable|Disable |
Enables the Internal Test FIFO loopback test during the printer delay time. |
64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".