/opt/SUNWvts/bin/env4test [standard arguments] -o dev=device_name, ContinuityTest=E(nable)|D(isable),SlotLedsTest=E|D,DiskLedsTest=E|D, PsupplyLedsTest=E|D,FanLedsTest=E|D,ScbLedsTest=E|D, FtmLedsTest=E|D,GreenLedsBlinkTest=E|D,RegTest=3N|5N|Cross_Talk, FRUPresenceTest=E|D,HealthTest=E|D,ResetTest=E|D, PowerSupplyTest=E|D,FanTest=E|D,env_mon=poll_interval,TempStatus=E|D, PsupplyStatus=E|D,FanStatus=E|D, AllTests=E|D
Table 22-3 env4test Command-Line Syntax
Argument |
Explanation |
---|---|
dev=raw_device_name |
Specifies the name of the raw device to test. |
ContinuityTest=Enable|Disable |
Turns on all LED's except for PDU. |
SlotLedsTest=Enable|Disable |
Enables or disables the slot LED flash test. |
DiskLedsTest=Enable|Disable |
Enables or disables the disk LED flash test. |
PsupplyLedsTest= Enable|Disable |
Enables or disables the power supply LED flash test. |
FanLedsTest=Enable|Disable |
Enables or disables the fan LED flash test. |
ScbLedsTest=Enable|Disable |
Enables or disables the scb LED flash test. |
FtmLedsTest=Enable|Disable |
Enables or disables the ftm LED flash test. |
GreenLedsBlinkTest= Enable|Disable |
Enables or disables the green LED hardware blink test. |
RegTest=3N|5N|Cross_Talk |
Enables or disables the 3N, 5N, or Cross Talk register test. |
FRUPresenceTest= Enable|Disable |
Enables or disables the FRU presence test. |
HealthTest= Enable|Disable |
Enables or disables the health test. |
ResetTest= Enable|Disable |
Enables or disables the reset test. |
PowerSupplyTest= Enable|Disable |
Enables or disables the power supply remote on/off test. |
FanTest=Enable|Disable |
Enables or disables the fan speed change test. |
env_mon=poll_interval |
Displays all system environmental statics every poll_interval seconds. (Display ONLY, does not test.) |
TempStatus=Enable|Disable |
Enables or disables display of CPU temperature. |
PsupplyStatus=Enable|Disable |
Enables or disables display of power supply status. |
FanStatus=Enable|Disable |
Enables or disables display of fan status. |
AllTests=Enable|Disable |
Performs all tests in sequence. |
64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".