To reach the dialog box below, right-click on the test name in the System Map and select Test Parameter Options. If you do not see this test in the System Map, you might need to expand the collapsed groups, or your system may not include the device appropriate to this test. Refer to the SunVTS User's Guide for more details.
rsctest Options |
Description |
---|---|
Enet test |
Enables or disables RSC Ethernet testing. |
Data Pattern Type |
Selects Sequential, Random, or both types of data patterns. |
Packet Size |
Defines the size of each data packet to be sent for all tests. |
Num Packets |
Specifies the number of data packets to send in one test loop. |
Target Host |
Specifies the IP address of a host to use for the ping test. |
Enet Test Type |
Selects any or all Internal, External, or ping tests. |
Flash test |
Enables or disables the flash checksum test. |
SEEPROM test |
Enables or disables the SEEPROM checksum test. |
FRU SEEPROM test |
Enables or disables the FRU SEEPROM checksum test (RSC 2.0 only). |
TOD test |
Enables or disables the Time Of Day test. |
I2C test |
Enables or disables the I2C test (RSC 2.0 only). |
Serial test |
Enables or disables the RSC serial test. |
Data Size |
Defines the data size to be sent. |
Loopback Type |
Selects Internal, External, or both. External requires a loopback plug. |
Data Pattern Type |
Selects Sequential, Random, or both types of data patterns. |
Serial Test Type |
Selects serial ports to be tested, u to u, c to c, or d to d. |
TTYU_Baud |
Selecta a fixed baud rate or all baud rates for testing the ttyu port. |
Modem Test |
Used to Enable or Disable the RSC PCMCIA modem test (RSC 2.0 only). |