RSC 1.0: /opt/SUNWvts/bin/rsctest standard_arguments -o enet=E/D, epattype=seq+rand,esize=packet_size,epkts=number_packets,target=IP_address, etest=I+E+P,flash=E/D,seeprom=E/D,serial=E/D,sdatsize=data_size, slb=I+E,spattype=seq+rand,stest=u_u+c_c+d_d,ttyubaud=baud_rate|all
RSC 2.0: /opt/SUNWvts/bin/rsctest standard_arguments -o enet=E/D, epattype=seq+rand,esize=packet_size,epkts=number_packets,target=IP_address, etest=I+E+P,flash=E/D,seeprom=E/D,fruseeprom=E/D,tod=E/D, i2c=E/D,serial=E|D,sdatsize=data_size,slb=I+E,spattype=seq+rand, stest=u_u+c_c+d_d,ttyubaud=baud_rate|all,rscmodem=E/D
Table 45-5 rsctest Command-Line Syntax
Argument |
Description |
---|---|
enet=enable|disable |
Enables or disables RSC Ethernet test. |
epattype=seq+rand |
Predefined pattern options used for Enet test. |
esize=packet_size |
Data size for each packet in the Enet test. |
epkts=number_packets |
Number of packets to send for Enet test. |
target=IP_address |
IP address of target system for Enet ping test. |
etest=Internal+External+ Ping |
Selects any or all Internal, External, or ping tests. |
flash=enable|disable |
Enables or disables RSC Flash Checksum test. |
seeprom=enable|disable |
Enables or disables RSC SEEPROM checksum test. |
fruseeprom=E/D (RSC 2.0 ONLY) |
Enables or disables RSC FRU SEEPROM checksum test. |
tod=E/D (RSC 2.0 ONLY) |
Enables or disables RSC Time Of Day test. |
i2c=E/D (RSC 2.0 ONLY) |
Enables or disables RSC i2c test. |
serial=enable|disable |
Enables or disables RSC serial test. |
sdatsize=data_size |
Data size for the rsc serial tests. |
slb=Internal+External |
Loopback type. External N/A on ports C and D. |
spattype=seq+rand |
Predefined pattern options used for RSC serial test. |
stest=u_u+c_c+d_d |
Defines port and configuration to use for RSC serial test. |
ttyu_baud=ALL|specific_baud |
Defines baud rates to be used in testing the RSC's console port. |
rscmodem=E/D |
Enables or disables the RSC PCMCIA modem test. |
64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".