test

SunVTS 5.0 Test Reference Manual

Chapter 54 Sun PCi2 Test (sunpci2test)

The sunpci2test tests the SunPCi2 plug-in PCI card, which is an Intel platform processor embedded in an add-on card. This test consists of approximately 150 POST routines that perform diagnostic, hardware detection, and initialization functions. The Bridge Diagnostic Tests and System Diagnostic Tests are purely diagnostic in nature. Most other routines are hardware detection and initialization tests, which also can fail.

The sunpci2test also monitors and reports messages from the processor self-tests.

sunpci2test Test Requirements

Before running the test, the X-window for Microsoft Windows must be shut down. If this is not done, the test will not launch.

To Shut Down Microsoft Windows and SunPCi2 Card:

  1. Click Start button in Microsoft Windows.

  2. Click Shut Down.

    The shutdown window appears. Wait for the "It is now safe to shut off your PC" message.

  3. Select "File" from the SunPCi window.

  4. Select "Exit" from the file menu.

  5. Click OK.

sunpci2test Options

To reach the dialog box below, right-click on the test name in the System Map and select Test Parameter Options. If you do not see this test in the System Map, you might need to expand the collapsed groups, or your system may not include the device appropriate to this test. Refer to the SunVTS User's Guide for more details.

Figure 54-1 sunpci2test Test Parameter Options Dialog Box

Graphic

sunpci2test only runs with the default parameters in place. Thus, this test does not allow any options to be configured specifically for an individual system. The number of instances is preset to 1 (the default value), as only one local copy of the test is supported.

sunpci2test Test Modes

Table 54-1 sunpci2test Test Modes

Test Mode 

Supported? 

Description 

Connection 

Yes 

Runs the full set of tests 

Functional 

(Offline) 

Yes 

Runs the full set of tests

sunpci2test Command-Line Syntax

/opt/SUNWvts/bin/sunpci2test standard_arguments

Note -

There are no test-specific options for sunpci2test.

Note -

64-bit tests are located in the sparcv9 subdirectory: /opt/SUNWvts/bin/sparcv9/testname. If a test is not present in this directory, then it may only be available as a 32-bit test. For more information refer to "32-Bit and 64-Bit Tests".