Driver Parameter Values and Definitions

The following table describes the eri driver parameters..

Table B-1 eri Driver Parameter, Status, and Descriptions


Parameter	Status	Description
`transceiver_inuse`	Read only	Defines the current status
`link_status`	Read only	Defines the current status
`link_speed`	Read only	Defines the current status
`link_mode`	Read only	Defines the current status
`ipg1`	Read and write	Inter-packet gap parameter
`ipg2`	Read and write	Inter-packet gap parameter
`pace_size`	Read and write	Operational mode parameter
`adv_autoneg_cap`	Read and write	Operational mode parameter
`adv_100fdx_cap`	Read and write	Operational mode parameter
`adv_100hdx_cap`	Read and write	Operational mode parameter
`adv_10fdx_cap`	Read and write	Operational mode parameter
`adv_10hdx_cap`	Read and write	Operational mode parameter
`autoneg_cap`	Read only	Local transceiver auto negotiation capability
`100fdx_cap`	Read only	Local transceiver capability of the hardware
`100hdx_cap`	Read only	Local transceiver capability of the hardware
`10fdx_cap`	Read only	Local transceiver capability of the hardware
`10hdx_cap`	Read only	Local transceiver capability of the hardware
`lp_autoneg_cap`	Read only	Link partner auto negotiation capability
`lp_100fdx_cap`	Read only	Link partner capability
`lp_100hdx_cap`	Read only	Link partner capability
`lp_10fdx_cap`	Read only	Link partner capability
`lp_10hdx_cap`	Read only	Link partner capability
`instance`	Read and write	Device instance
`lance_mode`	Read and write	Additional delay before transmitting a packet
`ipg0`	Read and write	Additional delay before transmitting a packet