This chapter describes the installation procedure for installing the Sun Java Desktop System Release 2
.
This section describes how to install the Java Desktop
System
using the CDs included with your Java Desktop
System
installation package.
Insert CD 1 into the CD drive.
The system starts to boot and displays the following list of options:
Boot from hard disk
Installation
Installation — ACPI Disabled
Installation — Safe Settings
Manual Installation
Rescue System
Memory Test
To perform a new installation of the Java Desktop
System
, use the arrow keys to highlight the Installation option, then press Enter.
The Configurator
presents a Software Evaluation Agreement dialog. Click on Accept to continue with the installation. You cannot continue with the
installation if you do not click on Accept.
From the Language Selection dialog, select a language, then click on Accept.
The Configurator
analyzes your
system. If Linux is not installed on your system, the Configurator
displays the installation settings of your hardware, as shown
in the example in Step 8.
However, if the Configurator
detects that
Linux is installed on your system, you are presented with the following options:
New installation
Select this option if Linux is not installed on your system or if you want to replace an installed version of Linux.
Update an existing system
Select this option if you want to upgrade an installed version of Linux. This option preserves configuration settings from your existing system whenever possible.
Boot installed system
Select this option if you have an installed version of Linux that you cannot reboot. You can use this option to try to fix the reboot problem manually.
Abort Installation
Select this option if you want to abort the installation.
Select New installation and click OK.
The Configurator
displays the following Software Options:
Default system with StarSuite - for Japan, China, Korea and Taiwan only
Default system with StarOffice - for all other countries
Select the appropriate option and click on Accept.
Next, you are presented with the Installation settings for your system.
For example:
Mode — New Installation
Keyboard Layout — English US
Mouse — PS/2 Mouse (Aux-port)
Partitioning — Format partition /dev/hda6 9.3 GB with reiser and Format partition /dev/hda5 196 MB for swap
If you click on Partitioning to modify the default
settings, the Configurator
checks your hard disk
and displays the following options:
Accept proposal as-is
Base partition setup on this proposal
Create custom partition setup
Select Accept Proposal as is and click on Next.
If you want to create a dual boot system, partitioning is an essential part of the installation procedure. Please see Recommended Guidelines for Partitioning for more information.
Software
Default system with StarOffice - for all other countries
GNOME system
StarOffice
Help and Support Documentation
Graphical Base System
If you click on Software, the Configurator
displays the following software options:
Default system with StarSuite - for Japan, China, Korea and Taiwan only
Default system with StarOffice - for all other countries
Select the appropriate option and click on Accept.
Booting — Booting from 1.IDE 9 54 GB, dev/hda Booting from 1.IDE 9 54 GB, dev/hda
If you click on Booting, the Configurator
displays the following boot options:
Write GRUB to the boot disk (MBR on /dev/hda)
Create a boot floppy
Do not use GRUB (a different boot manager is required)
Write GRUB to a different partition: /dev/hda
Select the appropriate option and click Accept.
Alternatively, accept the booting option proposed by the configurator.
Time Zone —Europe — Dublin
Language — English US
You have the following courses of action at this stage in the installation procedure:
Click on Accept to continue with the installation.
Click on Change to modify the installation settings before you proceed with the installation.
Click on Abort Installation to abort the installation.
Click on Accept to continue with the installation.
Click on Yes, install to commit the installation and all the choices made so far.
A message informs you that the Configurator
is preparing your hard disk. When the installation begins, a screen is displayed
with the following panes:
Current Package
Displays the name, description and size of the installation package and a status bar showing percentage completion of the installation.
Installation
Displays the status of the percentage download completed from the CD and the estimated time remaining to complete the download.
Installation Log (Extract)
Displays a log of activity for all the packages currently being installed
on your system. When the download of the packages from CD 1 is complete, the Configurator
displays a message informing you that the basic
installation is finished and the system continues to reboot.
After the system reboots , a dialog requests you to insert CD 2.
Insert CD 2 and click OK.
When the packages from CD 2 are installed, a dialog requests you to insert CD 3.
Insert CD 3 and click OK.
When all the packages from CD 3 are successfully installed, the Configurator
prompts you to enter a password for root, the system administrator.
Make a note of the root password for future references. You only need to log in as root for system administration purposes.
Enter a password for the root user.
Reenter the password for verification and click on Next.
You are then prompted to add a new user. This option is optional in a network environment.
Enter the First name, Last name, User login, and Password for the user you want to add and click on Next. A new user account is created with the details you enter.
The Configurator
starts to initialize the Desktop Settings as follows:
Text mode only — no graphical desktop
Graphical desktop environment
Select the Graphical desktop environment and click on Accept.
For a standalone non-networked installation, the Configurator
tries to detect local printers only.
Click Yes if you have a local printer attached to your system. Otherwise, click on Skip detection.
The Configurator
writes the system configuration
and displays the Installation Settings for the following
hardware devices:
Network interfaces
Printers
Modems
ISDN adapters
Sound
To change any of the Installation Settings, click on Change. Click on Next to accept the settings.
A message is displayed that the configuration is saved successfully and the system automatically reboots.
Eject CD 3.
At the login screen, log in with the username and password that you set up for the new user.
You can now use the Java Desktop System
.
The following desktop objects are displayed:
This Computer
Documents
Network Places
Trash
Learn About The Java™ Desktop System
StarOffice
Bottom Edge Panel
Refer to the Java Desktop System Release 2 Quick Start User Guide for help to get you started using the Java Desktop System.
If the Configurator
detects that Linux is
installed on your system, you are presented with the following options:
New installation
Update an existing system
Boot installed system
Abort Installation
If you want to upgrade an installed version of Linux, perform the following steps:
Select Update an existing system
This option preserves configuration settings from your existing system whenever possible.
Select Create a backup if you want to make a backup of your existing system.
Click Next.
Yor are prompted to choose the type of upgrade you require.
Follow the online instructions to complete the update of your existing system as described in Installing the Java Desktop System From CD.
The following table contains recommended guidelines for partitioning your disk:
Table 2–1 Guidelines for Partitioning
Partition |
Size |
Type |
Notes |
---|---|---|---|
/ |
5 GB, 3 GB minimum |
Primary |
Install the entire |
swap |
Double the size of RAM 128 MB minimum |
swap |
You can increase or reduce the size of the swap partition as necessary. |
The Configurator
presents the following
options when resizing your partition:
Accept proposal as-is
Base partition setup on this proposal
Create custom partition setup
Perform the following steps to resize a partition:
From the Installation Settings dialog, select Partitioning, select Base partition setup on this proposal option, then click on Next.
Highlight the partition that you want to resize, then click on Resize.
Use the slider to set how much space you want to allocate to your Windows partition and your Linux partition, then click OK.
The minimum allocation of space for Linux is 3024 MB.
Click on Next to save the partition table and return to the Installation Settings screen.
If the partition recommended by the Configurator
is unsuitable for the Java Desktop System
installation, you
might need to create a custom partition table.
Perform the following steps to create a custom partition table:
Back up any files you want to keep. This procedure overwrites your existing windows partition.
From the Installation Settings dialog, select Partitioning, select Create custom partition option, then click Next.
Select Custom partitioning, for experts option, then click Next to launch the Expert Partitioner dialog.
Select the device that refers to the disk where you want to install the application, for example /dev/hda, then click Delete to erase all partitions on that disk.
Click Create to create a new partition and select the Primary option.
In the pop-up window, set the Start Cylinder size to 0, set the End Cylinder size to + 5 GB and set the Mount Point to / .
Click Create to create a new partition and select the Extended option.
The pop-up window must contain all the correct settings. For example, the Start Cylinder value must be one more than the End Cylinder value of hda1 and the End Cylinder value can be the same as the End Cylinder value for /dev/hda.
Creating an extended partition that covers the remainder of the disk forces all other partitions to be created within that extended partition.
Click Create to create a new partition.
Select Swap from the menu beneath the Format option.
Specify the size of the swap partition using the + syntax in the End field. For example, if your system has 256 MB RAM, you would have 512 MB of swap memory, which is expressed as + 512 MB.
Click Create to create a new partition. A new partition to occupy the remainder of the disk is configured. Set the Mount Point to /usr.
Click Next to save the partition table and return to the Installation Settings screen.