Sun Open Telecommunications Platform 1.0 Installation and Administration Guide

OTP System Hardware and Firmware Requirements

The following table lists the hardware, OS, patch, and firmware requirements for OTP system servers, and for the optional external OTP installation server.

Table 2–1 OTP System Server Hardware, Operating System, Patch, and Firmware Requirements

Type 

Management Port 

OS 

Patch 

Firmware 

NetraTM 240 server

ALOM 

Solaris 10 Update 2, 64 bit 

121684-01 

OBP 4.18.10, POST 4.18.10, OBDIAG 4.18.10 

Netra 440 server 

ALOM 

Solaris 10 Update 2, 64 bit 

121685-02 

OBP 4.22.19, POST 4.22.19, OBDIAG 4.22.19 

Sun FireTM V240 server

ALOM 

Solaris 10 Update 2, 64 bit 

121684-01 

OBP 4.18.10, POST 4.18.10, OBDIAG 4.18.10 

Sun Fire V440 server 

ALOM 

Solaris 10 Update 2, 64 bit 

121685-02 

OBP 4.22.19, POST 4.22.19, OBDIAG 4.22.19 

Sun Fire V890 server 

RSC/ALOM 

Solaris 10 Update 2, 64 bit 

121688-01 

OBP 4.22.19, POST 4.22.19, OBDIAG 4.22.19 

Sun Fire E2900 server 


Note –

The E2900 can only be used as an first OTP host.


SC/LOM 

Solaris 10 Update 2, 64 bit 

114527-03 

ScApp:5.20.2, RTOS:45, SC POST:45 

Sun Fire T2000 server 

ALOM 

Solaris 10 Update 2, 64 bit 

123482-03 

Sun System Firmware 6.2.6 


Note –

The following table lists the minimum OTP system server requirements. If you plan to install the Open Telecommunications Platform using an external OTP installation server, ensure that the external OTP installation server meets the following partitioning requirements as well.

Table 2–2 OTP System Server RAM, Disk, and Connectivity Requirements

Category 

Requirement 

Minimum physical memory 

4 GB 

Minimum disk space 

72 GB 

Ethernet connectivity for management interfaces 

10/100 connection 

Ethernet connectivity for provisioning and data interfaces 

10/100/1000 connection 

The following table lists the supported storage hardware and NIC devices by server type.

Table 2–3 OTP System Supported Storage Hardware and NIC Devices

Server 

Storage 

NIC 

Netra 240 and 440 

FC 3510 

FC 3511 

SCSI 3120 JBOD 

SCSI 3310 JBOD 

SCSI 3320 JBOD 

SCSI 3310 RAID 

SCSI 3320 RAID 

On-board GE 

X4445A QGE 

X4150A-2 2 GE 

X4150A GE 

X4422A-2 combo 

Sun Fire V240, V440, and V890 

FC 3510 

FC 3511 

FC 6130 

SCSI 3310 JBOD 

SCSI 3120 JBOD 

SCSI 3320 JBOD 

SCSI 3310 RAID 

SCSI 3320 RAID 

On-board GE 

X4445A QGE 

X4150A-2 GE 

X4150A GE 

X4422A-2 combo 

Sun Fire E2900 


Note –

The E2900 can only be used as an first OTP host.


FC 3510 

SCSI 3120 JBOD 

SCSI 3310 JBOD 

SCSI 3310 RAID 

SCSI 3320 JBOD 

SCSI 3320 RAID 

On-board GE 

X4445A QGE 

X4150A-2 2GE 

X4150A GE 

X4422A-2 combo 

Sun Fire T2000 

FC 3510 

FC 3511 

FC 6130 

SCSI 3120 JBOD 

SCSI 3310 JBOD 

SCSI 3310 RAID 

On-board GE (e1000g driver) 

X4150A-2 2 GE 

X4150A GE 

For the latest list of supported storage and NIC devices, see (url to be determined).

The following table lists the storage device firmware requirements.

Table 2–4 OTP System Storage Device Firmware Requirements

Type 

Patch 

Requirement 

FC StorEdgeTM 3510

RAID 113723-15, JBOD 113662-01 

Version 2.3 of the sccli CLI utility must be installed first.  

FC StorEdge 3511 

113724-09 

Version 2.3 of the sccli CLI utility must be installed first. 

SCSI StorEdge 3120 

113728-02 Array Controller Firmware 

Version 2.3 of the sccli CLI utility must be installed first. 

SCSI StorEdge 3310 

113722-15 

Version 2.3 of the sccli CLI utility must be installed first. 

SCSI StorEdge 3320 

113730-01 

Version 2.3 of the sccli CLI utility must be installed first. 

FC StorEdge 6130 

118185-15 6130 services Release, 117856-19 6130 Baseline Firmware Release 

StorEDGE 6130 Array Firmware Upgrader patch 118185-15 must be installed first. 


Note –

The sccli CLI utility is included in the SUNWsscs package which can be downloaded from the Sun Download Center. The sccli CLI utility can also be installed from the optional Sun StorEdge Professional Storage Manager CD.