Sun Open Telecommunications Platform 1.0 Installation and Administration Guide

OTP System Hardware and Firmware Requirements

The following table lists the hardware, OS, patch, and firmware requirements for OTP system servers, and for the optional external OTP installation server.

Table 2–1 OTP System Server Hardware, Operating System, Patch, and Firmware Requirements


Type	Management Port	OS	Patch	Firmware
Netra^TM 240 server	ALOM	Solaris 10 Update 2, 64 bit	121684-01	OBP 4.18.10, POST 4.18.10, OBDIAG 4.18.10
Netra 440 server	ALOM	Solaris 10 Update 2, 64 bit	121685-02	OBP 4.22.19, POST 4.22.19, OBDIAG 4.22.19
Sun Fire^TM V240 server	ALOM	Solaris 10 Update 2, 64 bit	121684-01	OBP 4.18.10, POST 4.18.10, OBDIAG 4.18.10
Sun Fire V440 server	ALOM	Solaris 10 Update 2, 64 bit	121685-02	OBP 4.22.19, POST 4.22.19, OBDIAG 4.22.19
Sun Fire V890 server	RSC/ALOM	Solaris 10 Update 2, 64 bit	121688-01	OBP 4.22.19, POST 4.22.19, OBDIAG 4.22.19
Sun Fire E2900 server Note – The E2900 can only be used as an first OTP host.	SC/LOM	Solaris 10 Update 2, 64 bit	114527-03	ScApp:5.20.2, RTOS:45, SC POST:45
Sun Fire T2000 server	ALOM	Solaris 10 Update 2, 64 bit	123482-03	Sun System Firmware 6.2.6

Note –

The OTP Application Hosting Environment (AHE) components are supported only on these platforms for Network Equipment Providers' (NEP) application development or deployment, or for both.
The Open Telecommunications Platform supports one to eight-host clusters. At least one shared disk is mandatory for installing the Open Telecommunications Platform on a two to eight-host cluster. Only the N-by-N cluster configuration is supported.

The following table lists the minimum OTP system server requirements. If you plan to install the Open Telecommunications Platform using an external OTP installation server, ensure that the external OTP installation server meets the following partitioning requirements as well.

Table 2–2 OTP System Server RAM, Disk, and Connectivity Requirements


Category	Requirement
Minimum physical memory	4 GB
Minimum disk space	72 GB
Ethernet connectivity for management interfaces	10/100 connection
Ethernet connectivity for provisioning and data interfaces	10/100/1000 connection

The following table lists the supported storage hardware and NIC devices by server type.

Table 2–3 OTP System Supported Storage Hardware and NIC Devices


Server	Storage	NIC
Netra 240 and 440	FC 3510 FC 3511 SCSI 3120 JBOD SCSI 3310 JBOD SCSI 3320 JBOD SCSI 3310 RAID SCSI 3320 RAID	On-board GE X4445A QGE X4150A-2 2 GE X4150A GE X4422A-2 combo
Sun Fire V240, V440, and V890	FC 3510 FC 3511 FC 6130 SCSI 3310 JBOD SCSI 3120 JBOD SCSI 3320 JBOD SCSI 3310 RAID SCSI 3320 RAID	On-board GE X4445A QGE X4150A-2 GE X4150A GE X4422A-2 combo
Sun Fire E2900 Note – The E2900 can only be used as an first OTP host.	FC 3510 SCSI 3120 JBOD SCSI 3310 JBOD SCSI 3310 RAID SCSI 3320 JBOD SCSI 3320 RAID	On-board GE X4445A QGE X4150A-2 2GE X4150A GE X4422A-2 combo
Sun Fire T2000	FC 3510 FC 3511 FC 6130 SCSI 3120 JBOD SCSI 3310 JBOD SCSI 3310 RAID	On-board GE (e1000g driver) X4150A-2 2 GE X4150A GE

For the latest list of supported storage and NIC devices, see (url to be determined).

The following table lists the storage device firmware requirements.

Table 2–4 OTP System Storage Device Firmware Requirements


Type	Patch	Requirement
FC StorEdge^TM 3510	RAID 113723-15, JBOD 113662-01	Version 2.3 of the sccli CLI utility must be installed first.
FC StorEdge 3511	113724-09	Version 2.3 of the sccli CLI utility must be installed first.
SCSI StorEdge 3120	113728-02 Array Controller Firmware	Version 2.3 of the sccli CLI utility must be installed first.
SCSI StorEdge 3310	113722-15	Version 2.3 of the sccli CLI utility must be installed first.
SCSI StorEdge 3320	113730-01	Version 2.3 of the sccli CLI utility must be installed first.
FC StorEdge 6130	118185-15 6130 services Release, 117856-19 6130 Baseline Firmware Release	StorEDGE 6130 Array Firmware Upgrader patch 118185-15 must be installed first.

Note –

The sccli CLI utility is included in the SUNWsscs package which can be downloaded from the Sun Download Center. The sccli CLI utility can also be installed from the optional Sun StorEdge Professional Storage Manager CD.