创建文件系统

1. 使用群集文件系统（全局文件系统）或故障转移文件系统（本地文件系统）创建六个文件系统。

   本示例是针对全局文件系统。/etc/vfstab 文件的内容应类似如下：（注意，字段均以制表符分隔。）

   # Cluster File System/Global File System ##
   /dev/md/penguin/dsk/d500  /dev/md/penguin/rdsk/d500  
       /cal-svr-baseCS1  ufs  2  yes  logging,global
   /dev/md/penguin/dsk/d400  /dev/md/penguin/rdsk/d400  
       /share-disk-dirCS1  ufs  2  yes  logging,global
   /dev/md/polarbear/dsk/d200  /dev/md/polarbear/rdsk/d200  
       /cal-svr-baseCS2  ufs  2  yes  logging,global
   /dev/md/polarbear/dsk/d300  /dev/md/polarbear/rdsk/d300
       /share-disk-dirCS2  ufs  2  yes logging,global
   /dev/md/polarbear/dsk/d600  /dev/md/polarbear/rdsk/d300 
       /var-cal-dirCS1  ufs  2   yes  logging,global
   /dev/md/polarbear/dsk/d700  /dev/md/polarbear/rdsk/d300  
       /var-cal-dirCS2  ufs   2   yes  logging,global

   本示例是针对故障转移文件系统。/etc/vfstab 文件的内容应类似如下：（注意，字段均以制表符分隔。）

   # Failover File System/Local File System ##
   /dev/md/penguin/dsk/d500  /dev/md/penguin/rdsk/d500  
       /cal-svr-baseCS1  ufs  2  yes  logging
   /dev/md/penguin/dsk/d400  /dev/md/penguin/rdsk/d400  
       /share-disk-dirCS1  ufs  2  yes  logging
   /dev/md/polarbear/dsk/d200  /dev/md/polarbear/rdsk/d200 
      /cal-svr-baseCS2  ufs  2  yes  logging
   /dev/md/polarbear/dsk/d300  /dev/md/polarbear/rdsk/d300 
       /share-disk-dirCS2  ufs  2  yes  logging
   /dev/md/polarbear/dsk/d600  /dev/md/polarbear/rdsk/d300 
       /var-cal-dirCS1  ufs  2   yes  logging
   /dev/md/polarbear/dsk/d700  /dev/md/polarbear/rdsk/d300
      /var-cal-dirCS2  ufs  2   yes  logging

2. 在群集的所有节点上创建以下必需目录。

   # mkdir -p /install-rootCS1 share-disk-dirCS1 
        install-rootCS2 share-disk-dirCS2 var-cal-dirCS1 
        var-cal-dirCS2