建立檔案系統

1. 使用叢集檔案系統 (全域檔案系統) 或容錯移轉檔案系統 (本機檔案系統)，建立六個檔案系統。

   這個範例適用於全域檔案系統。/etc/vfstab 檔案的內容應該看起來如下：(注意，所有欄位都是以跳格來區隔。)

   # Cluster File System/Global File System ##
   /dev/md/penguin/dsk/d500  /dev/md/penguin/rdsk/d500  
       /cal-svr-baseCS1  ufs  2  yes  logging,global
   /dev/md/penguin/dsk/d400  /dev/md/penguin/rdsk/d400  
       /share-disk-dirCS1  ufs  2  yes  logging,global
   /dev/md/polarbear/dsk/d200  /dev/md/polarbear/rdsk/d200  
       /cal-svr-baseCS2  ufs  2  yes  logging,global
   /dev/md/polarbear/dsk/d300  /dev/md/polarbear/rdsk/d300
       /share-disk-dirCS2  ufs  2  yes logging,global
   /dev/md/polarbear/dsk/d600  /dev/md/polarbear/rdsk/d300 
       /var-cal-dirCS1  ufs  2   yes  logging,global
   /dev/md/polarbear/dsk/d700  /dev/md/polarbear/rdsk/d300  
       /var-cal-dirCS2  ufs   2   yes  logging,global

   這個範例適用於容錯移轉檔案系統。/etc/vfstab 檔案的內容應該看起來如下：(注意，所有欄位都是以跳格來區隔。)

   # Failover File System/Local File System ##
   /dev/md/penguin/dsk/d500  /dev/md/penguin/rdsk/d500  
       /cal-svr-baseCS1  ufs  2  yes  logging
   /dev/md/penguin/dsk/d400  /dev/md/penguin/rdsk/d400  
       /share-disk-dirCS1  ufs  2  yes  logging
   /dev/md/polarbear/dsk/d200  /dev/md/polarbear/rdsk/d200 
      /cal-svr-baseCS2  ufs  2  yes  logging
   /dev/md/polarbear/dsk/d300  /dev/md/polarbear/rdsk/d300 
       /share-disk-dirCS2  ufs  2  yes  logging
   /dev/md/polarbear/dsk/d600  /dev/md/polarbear/rdsk/d300 
       /var-cal-dirCS1  ufs  2   yes  logging
   /dev/md/polarbear/dsk/d700  /dev/md/polarbear/rdsk/d300
      /var-cal-dirCS2  ufs  2   yes  logging

2. 在叢集的所有節點上建立以下必需的目錄。

   # mkdir -p /install-rootCS1 share-disk-dirCS1 
        install-rootCS2 share-disk-dirCS2 var-cal-dirCS1 
        var-cal-dirCS2