test

Sun Open Telecommunications Platform 1.1 Installation and Administration Guide

ProcedureTo Deploy the OS to the New OTP Host

  1. Log in as root to the OTP master server.

  2. Type /opt/sun/n1gc/bin/n1sh to open the OTP command shell.

  3. Deploy the OS to the new OTP hosts

    In the OTP command shell, type load server ALOM IP address osprofile OS profile name networktype static IP Provisioning IP address hostname hostname manualnetboot=true where:

    • ALOM IP address is the IP address of the new OTP host's ALOM management port

    • OS profile name is the name of the OS profile

    • Provisioning IP address is the IP address of the new OTP host's provisioning interface

    • hostname is the name that will be assigned to the new OTP host

    For example:


    N1-ok> load server 10.1.15.1 osprofile sol10u2-profile networktype 
static IP 10.1.15.5 otpclient1 manualnetboot=true
    Note –

    The above example has been split into two lines to fit on the page. When typing the load server command, type the entire command as one continuous line.

Next Steps

Repeat the above steps for each new OTP host that is to be provisioned.

When you have completed provisioning the OS to all new OTP hosts, prepare each new OTP host as described in the next section.