To Create the JET Boot/Install Server

1. Open a Web browser and go to URL http://OTP master server:9090 where install server is either the IP address or the fully qualified name of the OTP master server or of the standalone OTP host.

   The OTP provisioning service log in screen appears.

2. Log in to the OTP provisioning service.

   The Service Provisioning System screen appears.

3. Click OS Provisioning.

   The OS Provisioning task list page appears.

   Scroll down to JET Solaris Image Servers.

4. Click the JET Solaris Image Servers Create link.

   The plans > details screen appears.

5. Click run.

   The plans > details > run screen appears.

6. Click select from list... beneath variable settings.

   The select variable from list... pop-up screen appears.

7. Scroll to the bottom of the pop-up screen and click create set.

   The select variable screen refreshes and enables the check boxes and data fields.

8. Type a name for the new variable set in the Set Name field., for example, otp.

9. Click the sps_cli check box.

   The sps_cli data field is enabled.

10. Type /var/otp/spsotp/N1_Service_Provisioning_System_5.2/cli/bin/cr_cli in the sps_cli data field.

    The screen refreshes and the check boxes and data fields are disabled.

11. Click Save.

12. Click the right-most select button.

    The select variables screen closes, and the plans > details > run screen is updated.

13. Click on the target host field select from list... link.

    The select hosts from list screen appears.

14. Click masterserver, and then click add hosts to main window.

    The select hosts from list screen closes, and the plans > details> run screen is updated.

15. Click run plan (includes preflight)

    The Create JET Server plan will take a few minutes to complete. When the plan completes, the results screen appears.

16. Click done.

    This completes preparation of the OTP master server.

Next Steps

Prepare the new OTP hosts for OTP installation as described in the next section.