Skip Navigation Links | |
Exit Print View | |
Sun Blade X6275 M2 Server Module Installation Guide for Linux Operating Systems |
About This Documentation (PDF and HTML)
Installing Oracle Linux from Distribution Media
How to Install Oracle Linux From a PXE Image
How to Install Required Drivers
How to Update the Oracle Linux Operating System
Installing Red Hat Enterprise Linux
RHEL Installation and Administration Documentation
How to Install the OS From the Distribution Media
How to Install Required Drivers
Installing the SLES Operating System
SLES Installation and Configuration Documentation
Installing the SLES OS From the Distribution Media
This procedure describes how to prepare your server to boot from a PXE image, and how to initiate the request to download the boot image file from the Preboot Execution Environment (PXE)/DHCP server. This causes PXE to install the boot image on your server module.
Note - Before you configure your server to install RHEL from a PXE server, you need to configure your network to support a PXE server.
For information about required drivers, see Obtaining Drivers.
The PXE client is the target server module node to which you are installing the RHEL OS.
The PXE client connects to the PXE server and attempts to obtain an IP address from the DHCP server.
The install image is downloaded onto the target Sun Blade X6275 M2 server module node.
See How to Update RHEL.