| Skip Navigation Links | |
| Exit Print View | |
|
Sun Server X2-8 (formerly Sun Fire X4800 M2) Service Manual Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Sun Server X2-8 (formerly Sun Fire X4800 M2) Service Manual Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library |
Sun Server X2-8 Service Manual Overview
Controlling Server Power Remotely
Removing and Installing Components
Preparing for Service and Operation
Removal and Installation Procedures
Removing and Installing a Power Supply (CRU)
Removing and Installing a Hard Drive (CRU)
Removing and Installing a Hard Drive Filler
Replacing the Hard Drive Backplane (FRU)
Adding, Removing, and Installing a CMOD (CRU)
CPU Module (CMOD) Designation and Population Rules
Removing and Installing a CMOD Filler
How to Replace the CMOD Battery (CRU)
Removing and Installing DIMMs (CRU)
Removing and Installing a RAID Expansion Module (CRU)
Removing and Installing a Fabric Expansion Module (CRU)
Replacing a CPU and Heatsink Assembly (FRU)
Removing and Installing a Fan Module (CRU)
Replacing a Fan Module Controller Board (FRU)
Removing and Installing a NEM or a NEM Filler (CRU)
Removing and Installing a PCIe EM (CRU)
Removing and Installing the Service Processor Module (CRU)
Removing and Installing the Multiport Cable
Removing and Installing the Subassembly Module (FRU)
Sun Server X2-8 Service Procedures and Information
Firmware Information and Procedures
How to Use the Tools and Drivers CD
How to Access the BIOS Setup Utility
Component LED Locations and Functions
Sun Server X2-8 Specifications
How to Request Physical Media Online
Note - To ensure compatibility and optimal performance, You should update your server to the latest version of firmware.
Firmware resides on both the SP module and the CPU modules (CMOD). The firmware versions on both components must match. You can perform firmware updates only on the SP module. The firmware that resides on the CMODs is maintained by the SP module. The SP module automatically updates all CMODs to its version of firmware. If a CMOD is replaced and its version is different from the firmware version that resides on the SP module, then the SP module will update or downgrade the new CMOD to the version of firmware that resides on the SP module. If the SP module is replaced and its firmware is different from the firmware on the CMODs, it will update or downgrade the CMODs to the version of firmware that resides on the SP module.
The following table shows the resulting SP module response to user-initiated firmware updates and component replacements.
|
|