Skip Navigation Links | |
Exit Print View | |
Sun Server X2-8 Product Documentation Sun Server X2-8 (formerly Sun Fire X4800 M2) Documentation Library |
Administration, Diagnostics, and Service
Determining Your Server Management Strategy
Common Server Management Tasks
Server Management Software Benefits
Oracle Integrated Lights Out Manager
Oracle Hardware Management Pack
Oracle Hardware Installation Assistant
Evaluating Your Server Environment
Server Management Downloads and Documentation
Oracle ILOM 3.0 Common Feature Set Documentation
Determining Current Firmware Versions
How to Verify the Oracle ILOM and BIOS Firmware Versions Using the Web Interface
How to Verify the Oracle ILOM and BIOS Firmware Versions Using the Command Line Interface
How to Verify the LSI HBA Firmware Version
Planning and Downloading the Firmware Update
How to Plan the Firmware Update
How to Download Firmware Updates
How to Request Physical Media Online
How to Request Physical Media by Phone
Updating the Oracle ILOM and System BIOS
How to Update the Oracle ILOM and System BIOS Using the Web Interface
How to Update the Oracle ILOM and System BIOS Using the CLI
How to Update Embedded HBA Firmware
How to Update NEM Firmware Using the Web Interface
How to Update NEM Firmware Using the CLI
Server-Specific Oracle ILOM Features
Minimum Supported Firmware and BIOS
How to Use the Web Interface to Monitor Power Usage and Set Notification Thresholds
How to Use the CLI to Monitor Power Usage and Set Notification Thresholds
Fixing Problems with Oracle ILOM Using the Preboot Menu
Using the edit Command and Configuring the Preboot Menu for Remote Access
Restoring Oracle ILOM Access to the Serial Console
How to Recover the SP Firmware Image
Identifying and Clearing Faults
Components With No Fault Diagnosis
Recovering a Lost Oracle ILOM Password
How to Recover a Lost Password by Proving Physical Presence
For details on how to log into Oracle ILOM using a serial connection, refer to Connecting to Oracle ILOM in Sun Server X2-8 (formerly Sun Fire X4800 M2) Installation Guide.
From the server Oracle ILOM, enter the command:
-> reset /SP
Power off the server. See the Powering the Server On and Off in Sun Server X2-8 (formerly Sun Fire X4800 M2) Installation Guide.
The Oracle ILOM reboots, and messages begin scrolling on the screen.
After powering on or resetting the SP, press and hold the Locate button on the server front panel until the preboot menu appears.
Type in xyzzy when you see the message:
Booting linux in n seconds...
Note - You cannot interrupt the Oracle ILOM boot process by typing xyzzy until you have configured the settings as described in Using the edit Command and Configuring the Preboot Menu for Remote Access. One of these settings sets the value of n, which is the amount of time in seconds that the system waits for your input.
The Oracle ILOM preboot menu appears as shown here.
Booting linux in 10 seconds... ILOM Pre-boot Menu ------------------ Type "h" and [Enter] for a list of commands, or "?" [Enter] for command-line key bindings. Type "h cmd" for summary of ’cmd’ command. Warning: SP will warm-reset after 300 seconds of idle time. Set ’bootretry’ to -1 to disable the time-out. Preboot>
See Also