Oracle® Fusion Middleware Enterprise Deployment Guide for Oracle Enterprise Content Management Suite 11g Release 1 (11.1.1) E15483-01 |
|
![]() Previous |
![]() Next |
Home > Enterprise Deployment Guide... > Enterprise Deployment Overview
This section covers these topics:
An enterprise deployment is an Oracle best practices blueprint based on proven Oracle high-availability and security technologies and recommendations for Oracle Fusion Middleware. The best practices described in these blueprints span all Oracle products across the entire technology stack: Oracle Database, Oracle Fusion Middleware, Oracle Applications, Oracle Collaboration Suite, and Fusion Middleware Control.
An Oracle Fusion Middleware enterprise deployment:
considers various business service level agreements (SLA) to make high-availability best practices as widely applicable as possible
leverages database grid servers and storage grid with low-cost storage to provide highly resilient, lower cost infrastructure
uses results from extensive performance impact studies for different configurations to ensure that the high-availability architecture is optimally configured to perform and scale to business needs
enables control over the length of time to recover from an outage and the amount of acceptable data loss from a natural disaster
uses Oracle best practices and recommended architecture, which are independent of hardware and operating systems.
For more information on high availability practices, go to http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm
.
Note: This document focuses on enterprise deployments in Linux environments, but enterprise deployments can also be implemented in UNIX and Windows environments. |
Oracle Enterprise Content Management Suite (Oracle ECM), an Oracle Fusion Middleware component, is an integrated suite of products designed for managing content. It is the industry's most unified enterprise content management platform that enables you to leverage industry-leading document management, Web content management, digital asset management, and records management functionality to build your business applications. Building a strategic enterprise content management infrastructure for content and applications helps you to reduce costs, easily share content across the enterprise, minimize risk, automate expensive, time-intensive and manual processes, and consolidate multiple Web sites onto a single platform.
Oracle Enterprise Content Management Suite offers the following benefits:
Superior usability: Built-in support for end-users, workgroups, content experts, process owners, administrators and webmaster
Optimized management: Unified architecture for securely managing documents, files, web content and digital assets
Hot-pluggable: Out-of-the-box support for Oracle and third-party repositories, security systems, and enterprise applications
Oracle Enterprise Content Management Suite comprises a number of different components including:
Oracle Universal Content Management
Oracle Universal Content Management (Oracle UCM) is the industry's most unified enterprise content management platform that enables you to leverage market-leading document management, Web content management, digital asset management, and records retention functionality to build and complement your business applications. Building a strategic enterprise content management infrastructure for content and applications helps you to reduce costs, easily share content across the enterprise, minimize risk, automate expensive, time-intensive and manual processes, and consolidate multiple Web sites onto a single platform for centralized management. Through user-friendly interfaces, roles-based authentication and security models, Oracle Universal Content Management empowers users throughout the enterprise to view, collaborate on or retire content, ensuring that all accessible distributed or published information is secure, accurate and up-to-date.
Oracle Information Rights Management
Oracle Information Rights Management (Oracle IRM) is an information security technology that secures and tracks sensitive digital information everywhere it is stored and used. Conventional information management products only manage documents, e-mails, and Web pages while they remain stored within server-side repositories. Oracle Information Rights Management uses encryption to extend the management of information beyond the repository to every copy of an organization's most sensitive information, everywhere it is stored and used: on end-user desktops, laptops and mobile wireless devices, in other repositories, inside and outside the firewall.
Oracle Imaging and Processing Management
Oracle Imaging and Process Management (Oracle I/PM) provides organizations with a scalable solution focused on process-oriented imaging applications and image-enabling enterprise applications. It enables image capture, annotation and markup of images, automates routing and approvals, and supports high-volume applications for billions of items. With Oracle Imaging and Process Management, organizations can quickly integrate their content and processes directly with Oracle and other third-party enterprise applications.
The Oracle Fusion Middleware configurations discussed in this guide are designed to ensure security of all invocations, maximize hardware resources, and provide a reliable, standards-compliant system for enterprise computing with a variety of applications.
The security and high-availability benefits of the Oracle Fusion Middleware configurations are realized through isolation in firewall zones and replication of software components.
The enterprise deployment architectures are secure because every functional group of software components is isolated in its own DMZ, and all traffic is restricted by protocol and port. The following characteristics ensure security at all needed levels, as well as a high level of standards compliance:
Configure external load balancers to redirect all external communication received on port 80 to port 443.
Note: The Oracle Technology Network (http://www.oracle.com/technology/index.html ) provides a list of validated load balancers and their configuration at http://www.oracle.com/technology/products/ias/hi_av/Tested_LBR_FW_SSLAccel.html . |
Communication from external clients does not go beyond the Load Balancing Router (LBR) level.
No direct communication from the Load Balancing Router to the data tier is allowed.
Components are separated in different protection zones: the web tier, application tier, and the data tier.
Direct communication between two firewalls at any one time is prohibited.
If a communication begins in one firewall zone, it must end in the next firewall zone.
Oracle Internet Directory (OID) is isolated in the data tier.
Oracle Identity Management (IDM) components are in a separate subnet.
All communication between components across protection zones is restricted by port and protocol, according to firewall rules.
The following terminology is used in this enterprise deployment guide:
Oracle home: An Oracle home contains installed files necessary to host a specific product. For example, the SOA Oracle home contains a directory that contains binary and library files for Oracle SOA Suite. An Oracle home resides within the directory structure of the Middleware home. Each Oracle home can be associated with multiple Oracle instances or Oracle WebLogic Server domains.
WebLogic Server home: A WebLogic Server home contains installed files necessary to host a WebLogic Server. The WebLogic Server home directory is a peer of Oracle home directories and resides within the directory structure of the Middleware home.
Middleware home: A Middleware home consists of the Oracle WebLogic Server home, and, optionally, one or more Oracle homes. A Middleware home can reside on a local file system or on a remote shared disk that is accessible through NFS.
Oracle instance: An Oracle instance contains one or more active middleware system components, for example Oracle Web Cache, Oracle HTTP Server, or Oracle Internet Directory. You determine which components are part of an instance, either at install time or by creating and configuring an instance at a later time. An Oracle instance contains files that can be updated, such as configuration files, log files, temporary files.
failover: When a member of a high availability system fails unexpectedly (unplanned downtime), in order to continue offering services to its consumers, the system undergoes a failover operation. If the system is an active-passive system, the passive member is activated during the failover operation and consumers are directed to it instead of the failed member. The failover process can be performed manually, or it can be automated by setting up hardware cluster services to detect failures and move cluster resources from the failed node to the standby node. If the system is an active-active system, the failover is performed by the load balancer entity serving requests to the active members. If an active member fails, the load balancer detects the failure and automatically redirects requests for the failed member to the surviving active members. See Oracle Fusion Middleware High Availability Guide for information on active-active and active-passive systems.
failback: After a system undergoes a successful failover operation, the original failed member can be repaired over time and be re-introduced into the system as a standby member. If desired, a failback process can be initiated to activate this member and deactivate the other. This process reverts the system back to its pre-failure configuration.
hardware cluster: A hardware cluster is a collection of computers that provides a single view of network services (for example: an IP address) or application services (for example: databases, Web servers) to clients of these services. Each node in a hardware cluster is a standalone server that runs its own processes. These processes can communicate with one another to form what looks like a single system that cooperatively provides applications, system resources, and data to users.
A hardware cluster achieves high availability and scalability through the use of specialized hardware (cluster interconnect, shared storage) and software (health monitors, resource monitors). (The cluster interconnect is a private link used by the hardware cluster for heartbeat information to detect node death.) Due to the need for specialized hardware and software, hardware clusters are commonly provided by hardware vendors such as Sun, HP, IBM, and Dell. While the number of nodes that can be configured in a hardware cluster is vendor dependent, for the purpose of Oracle Fusion Middleware high availability, only two nodes are required. Hence, this document assumes a two-node hardware cluster for high availability solutions employing a hardware cluster.
cluster agent: The software that runs on a node member of a hardware cluster that coordinates availability and performance operations with other nodes. Clusterware provides resource grouping, monitoring, and the ability to move services. A cluster agent can automate the service failover.
clusterware: Software that manages the operations of the members of a cluster as a system. It allows one to define a set of resources and services to monitor via a heartbeat mechanism between cluster members and to move these resources and services to a different member in the cluster as efficiently and transparently as possible.
shared storage: Shared storage is the storage subsystem that is accessible by all the machines in the EDG domain. Among other things, the following is located on the shared disk:
Middleware Home software
AdminServer Domain Home
JMS
Tlogs (where applicable)
Managed server homes can also be optionally located in the shared disk. The shared storage can be a Network Attached Storage (NAS), a Storage Area Network (SAN) or any other storage system that multiple nodes can access simultaneously and can read/write.
primary node: The node that is actively running an Oracle Fusion Middleware instance at any given time and has been configured to have a backup/secondary node. If the primary node fails, Oracle Fusion Middleware instance is failed over to the secondary node. This failover can be manual or automated using the Clusterware for Administration Server. For a server migration based scenario, WebLogic Whole Server Migration is used for automated failover.
secondary node: The node that is the backup node for an Oracle Fusion Middleware instance. This is where the active instance fails over when the primary node is no longer available. See the definition for primary node in this section.
network host name: Network host name is a name assigned to an IP address either through the /etc/hosts
file or through DNS resolution. This name is visible in the network that the machine to which it refers to is connected. Often, the network host name and physical host name are identical. However, each machine has only one physical host name but may have multiple network host names. Thus, a machine's network host name may not always be its physical host name.
physical host name: This guide differentiates between the terms physical host name and network host name. This guide uses physical host name to refer to the "internal name" of the current machine. On UNIX, this is the name returned by the hostname
command.
Physical host name is used by Oracle Fusion Middleware to reference the local host. During installation, the installer automatically retrieves the physical host name from the current machine and stores it in the Oracle Fusion Middleware configuration metadata on disk.
physical IP: Physical IP refers to the IP address of a machine on the network. In most cases, it is normally associated with the physical host name of the machine (see the definition of the physical host name). In contrast to a virtual IP, it is always associated with the same machine when on a network.
switchover: During normal operation, active members of a system may require maintenance or upgrading. A switchover process can be initiated to allow a substitute member to take over the workload performed by the member that requires maintenance or upgrading, which undergoes planned downtime. The switchover operation ensures continued service to consumers of the system.
switchback: When a switchover operation is performed, a member of the system is deactivated for maintenance or upgrading. When the maintenance or upgrading is completed, the system can undergo a switchback operation to activate the upgraded member and bring the system back to the pre-switchover configuration.
virtual host name: Virtual host name is a network addressable host name that maps to one or more physical machines via a load balancer or a hardware cluster. For load balancers, the name "virtual server name" is used interchangeably with virtual host name in this book. A load balancer can hold a virtual host name on behalf of a set of servers, and clients communicate indirectly with the machines using the virtual host name. A virtual host name in a hardware cluster is a network host name assigned to a cluster virtual IP. Because the cluster virtual IP is not permanently attached to any particular node of a cluster, the virtual host name is not permanently attached to any particular node either.
Note: Whenever the term "virtual host name" is used in this document, it is assumed to be associated with a virtual IP address. In cases where just the IP address is needed or used, it will be explicitly stated. |
virtual IP: Also, cluster virtual IP and load balancer virtual IP. Generally, a virtual IP can be assigned to a hardware cluster or load balancer. To present a single system view of a cluster to network clients, a virtual IP serves as an entry point IP address to the group of servers which are members of the cluster. A virtual IP can be assigned to a server load balancer or a hardware cluster.
A hardware cluster uses a cluster virtual IP to present to the outside world the entry point into the cluster (it can also be set up on a standalone machine). The hardware cluster's software manages the movement of this IP address between the two physical nodes of the cluster while clients connect to this IP address without the need to know which physical node this IP address is currently active on. In a typical two-node hardware cluster configuration, each machine has its own physical IP address and physical host name, while there could be several cluster IP addresses. These cluster IP addresses float or migrate between the two nodes. The node with current ownership of a cluster IP address is active for that address.
A load balancer also uses a virtual IP as the entry point to a set of servers. These servers tend to be active at the same time. This virtual IP address is not assigned to any individual server but to the load balancer which acts as a proxy between servers and their clients.
The following abbreviations are used in this enterprise deployment guide:
ASM = Automatic Storage Management
BPEL = Business Process Execution Language
CSF = Credential Store Framework
DB = Database
DN = Distinguished Name
DNS = Domain Name Service
ECM = Enterprise Content Management
EM = Enterprise Manager
FMW = Fusion Middleware
FTP = File Transfer Protocol
HA = High Availability
IDM = Identity Management
IP = Internet Protocol
I/PM = Imaging and Processing Management
IRM = Information Rights Management
JOC = Java Object Cache
JRF = Java Required Files
JMS = Java Message Service
LBR = Load Balancing Router
LDAP = Lightweight Directory Access Protocol
NAS = Network Attached Storage
NAT = Network Address Translation
NFS = Network File System
OAM = Oracle Access Manager
OAP = Oracle Access Protocol
OCS = Oracle Content Server
OHS = Oracle HTTP Server
OID = Oracle Internet Directory
OIP = Oracle Internet Protocol
OPSS = Oracle Platform Security Services
OVD = Oracle Virtual Directory
RAC = Real Application Clusters
RCA = Repository Create Assistant
RCU = Repository Creation Utility
SAN = Storage Area Network
SLA = Service Level Agreement
SOA = Service-Oriented Architecture
UCM = Universal Content Management
UMS = Unified Messaging System
URM = Universal Records Management
VIP = Virtual Internet Protocol
WC = WebCenter
WLS = WebLogic Server
WLST = WebLogic Scripting Tool
WSM = Web Services Manager
Typical hardware requirements for the enterprise deployment on Linux operating systems are listed in Table 1-1. For detailed requirements or for requirements for other platforms, see the Oracle Fusion Middleware installation documentation for that platform.
Table 1-1 Typical Hardware Requirements
Server | Processor | Disk | Memory | TMP Directory | Swap |
---|---|---|---|---|---|
Database |
4 or more X Pentium, 1.5 GHz or greater |
nXm n = number of disks, at least 4 (striped as one disk) m = size of the disk (minimum of 30 GB) |
6-8 GB |
Default |
Default |
WEBHOSTn |
4 or more X Pentium, 1.5 GHz or greater |
10 GB |
4 GB |
Default |
Default |
SOAHOSTn |
4 or more X Pentium, 1.5 GHz or greater |
10 GBFoot 1 |
4 GB |
Default |
Default |
ECMHOSTn |
4 or more X Pentium, 1.5 GHz or greater |
10 GBFoot 2 |
6 GB |
Default |
Default |
Footnote 1 For a shared storage MW_HOME configuration, two installations suffice by making a total of 20 GB independently of the number of slots.
Footnote 2 ECM can reuse MW_HOME binaries from the SOA installation in shared storage.
Note: You must perform the appropriate capacity planning to determine the number of nodes, CPU, and memory requirements for each node depending on the specific system's load as well as the throughput and response requirements. These will vary for each application or custom SOA system being used. |
The instructions and diagrams in this guide describe a reference topology, to which variations may be applied.
This guide provides configuration instructions for a reference enterprise topology that uses service-oriented architecture (SOA) and Oracle Enterprise Content Management Suite (Oracle ECM) with Oracle Access Manager (OAM), as shown in Figure 1-1.
This section covers these topics:
Integration with the Oracle Identity Management (IDM) system is an important aspect of the enterprise deployment architecture. This integration provides features such as single sign-on, integration with OPSS, centralized identity and credential store, authentication for the WebLogic domain, and so on. The Oracle IDM enterprise deployment is separate from the Oracle ECM enterprise deployment and exists in a separate domain by itself. See Oracle Fusion Middleware Enterprise Deployment Guide for Oracle Identity Management for more information on identity management in an enterprise deployment context.
The primary interface to the Oracle IDM enterprise deployment is the LDAP traffic to the LDAP servers, the OAP (Oracle Access Protocol) to the OAM Access Servers, and the HTTP redirection of authentication requests.
Nodes in the web tier are located in the DMZ public zone. In this tier, two nodes WEBHOST1 and WEBHOST2 run Oracle HTTP Server configured with WebGate and mod_wl_ohs.
Through mod_wl_ohs, which allows requests to be proxied from Oracle HTTP Server to WebLogic Server, Oracle HTTP Server forwards the requests to WebLogic Server running in the application tier.
WebGate (which is an Oracle Access Manager component) in Oracle HTTP Server uses Oracle Access Protocol (OAP) to communicate with Oracle Access Manager running on OAMHOST2, in the Identity Management DMZ. WebGate and Oracle Access Manager are used to perform operations such as user authentication.
The web tier also includes a load balancer router to handle external requests. External requests are sent to the virtual host names configured on the load balancer. The load balancer then forwards the requests to Oracle HTTP Server.
The WebGate module in Oracle HTTP Server uses Oracle Access Protocol (OAP) to communicate with Oracle Access Manager to perform operations such as querying user groups.
On the firewall protecting the web tier, only the HTTP ports are open: 443 for HTTPS and 80 for HTTP.
This enterprise topology uses an external load balancer. This external load balancer should have the following features:
Ability to load-balance traffic to a pool of real servers through a virtual host name: Clients access services using the virtual host name (instead of using actual host names). The load balancer can then load-balance requests to the servers in the pool.
Port translation configuration should be possible so that incoming requests on the virtual host name and port are directed to a different port on the back-end servers.
Monitoring of ports on the servers in the pool to determine availability of a service.
Virtual servers and port configuration: Ability to configure virtual server names and ports on your external load balancer, and the virtual server names and ports must meet the following requirements:
The load balancer should allow configuration of multiple virtual servers. For each virtual server, the load balancer should allow configuration of traffic management on more than one port. For example, for Oracle HTTP Server in the web tier, the load balancer needs to be configured with a virtual server and ports for HTTP and HTTPS traffic.
The virtual server names must be associated with IP addresses and be part of your DNS. Clients must be able to access the external load balancer through the virtual server names.
Ability to detect node failures and immediately stop routing traffic to the failed node.
Fault-tolerant mode: It is highly recommended that you configure the load balancer to be in fault-tolerant mode.
It is highly recommended that you configure the load balancer virtual server to return immediately to the calling client when the back-end services to which it forwards traffic are unavailable. This is preferred over the client disconnecting on its own after a timeout based on the TCP/IP settings on the client machine.
Sticky routing capability: Ability to maintain sticky connections to components. Examples of this include cookie-based persistence, IP-based persistence, and so on.
The load balancer should be able to terminate SSL requests at the load balancer and forward traffic to the back-end real servers using the equivalent non-SSL protocol (for example, HTTPS to HTTP). Typically, this feature is called SSL acceleration and it is required for this EDG.
Nodes in the application tier are located in the DMZ secure zone.
In this tier, two nodes (SOAHOST1 and SOAHOST2) run Oracle WebLogic Server configured with managed servers for running SOA components such as BPEL Process Manager. The managed servers are configured in an active-active manner.
ECMHOST1 and ECMHOST2 run the Oracle Universal Content Management (UCM) servers and Oracle Imaging and Processing Management (I/PM) servers.
SOAHOST1 and SOAHOST2 also run the Oracle WebLogic Server Administration Console and Oracle Enterprise Manager Fusion Middleware Control, but in an active-passive configuration. You can fail over the Administration Server manually (see Section 5.12, "Manually Failing Over the Administration Server to SOAHOST2"). Alternatively, you can configure the Oracle WebLogic Server Administration Console with CFC/CRS to fail over automatically on a separate hardware cluster (not shown in this architecture).
Oracle Web Services Manager (Oracle WSM) provides a policy framework to manage and secure Web services in the EDG topology. WSM Policy Manager also runs in active-active configuration in the same servers as Oracle FMW SOA Suite.
On the firewall protecting the application tier, the HTTP ports, OAP port, and proxy port are open. The OAP port is for the WebGate module running in Oracle HTTP Server in the web tier to communicate with Oracle Access Manager. Applications requiring external HTTP access use Oracle HTTP Server as the proxy. (The proxy on the Oracle HTTP Server must be enabled to allow this access.)
Nodes in the data tier are located in the most secured network zone (the intranet).
In this tier, an Oracle RAC database runs on the nodes CUSTDBHOST1 and CUSTDBHOST2. The database contains the schemas needed by the SOA and ECM components. The ECM and SOA components running in the application tier access this database.
On the firewall protecting the data tier, the database listener port (typically, 1521) is required to be open. The LDAP ports (typically, 389 and 636) are also required to be open for the traffic accessing the LDAP storage in the IDM EDG.
Oracle recommends that the nodes in the Oracle ECM enterprise deployment topology communicate using unicast. Unlike multicast communication, unicast does not require cross-network configuration and it reduces potential network errors that can occur from multicast address conflicts as well.
The following considerations apply when using unicast to handle cluster communications:
All members of a WebLogic cluster must use the same message type. Mixing between multicast and unicast messaging is not allowed.
Individual cluster members cannot override the cluster messaging type.
The entire cluster must be shut down and restarted to change the message modes (from unicast to multicast or from multicast to unicast).
JMS topics configured for multicasting can access WebLogic clusters configured for unicast because a JMS topic publishes messages on its own multicast address that is independent of the cluster address. However, the following considerations apply:
The router hardware configurations that allow unicast clusters may not allow JMS multicast subscribers to work.
JMS multicast subscribers need to be in a network hardware configuration that allows multicast accessibility. (That is, JMS subscribers must be in a multicast-enabled network to access multicast topics.)
Table 1-2 identifies the source for installation of each software component. For more information, see Oracle Fusion Middleware Installation Guide for Oracle SOA Suite and Oracle Fusion Middleware Installation Guide for Oracle Enterprise Content Management Suite.
Table 1-2 Components and Installation Sources
Component | Distribution Medium |
---|---|
Oracle Database 10g or 11g |
Oracle Database 10g CD (10.2.0.4 or later SE or EE version of the database) using the AL32UTF8 character set. Oracle Database Server 11g CD (11.1.0.7 or later SE or EE version of the database), using the AL32UTF8 character set. |
Repository Creation Utility (RCU) |
Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.1) DVD |
Oracle WebLogic Server (WLS) |
Oracle WebLogic Server (10.3.3) DVD |
Oracle HTTP Server (OHS) |
Oracle Fusion Middleware WebTier and Utilities 11g (11.1.1.1) DVD |
Oracle SOA Suite |
Oracle SOA Suite 11g (11.1.1.3) DVD |
Oracle Enterprise Content Management Suite |
Oracle ECM 11g (11.1.1.3) DVD |
Oracle Access Manager (OAM) Webgate |
Oracle Access Manager 10g Webgates (10.1.4.3) DVD ; OAM OHS 11g webgates per platform |
Oracle Virtual Directory (OVD) |
Oracle Identity Management 11g (11.1.1.1) DVD |
Note: This document focuses on enterprise deployments in Linux environments, but enterprise deployments can also be implemented in UNIX and Windows environments. |
The Oracle Fusion Middleware Configuration Wizard enables you to extend the Oracle WebLogic Server domain by adding only the needed components. Rather than using the Configuration Wizard to create SOA components and the Oracle Enterprise Content Management Suite components along with the domain that includes the Administration Server, Enterprise Manager, and WSM-PM in a single pass, you can instead create the domain and its Administration Server in one pass of the Configuration Wizard and then extend the domain by adding Oracle Enterprise Manager, SOA, WSM-PM, Oracle Universal Content Management (UCM), and Oracle Imaging and Process Management (I/PM) components in subsequent passes. Using this incremental approach, you can verify the installation of the servers and perform specific validations after each pass of the Configuration Wizard. In general, Oracle recommends the following approach:
Run a first pass of the Configuration Wizard to install the Administration Server (described in Chapter 5, "Creating a Domain with Administration Server").
Run a second pass of the Configuration Wizard to install the Oracle Enterprise Manager, SOA, and WSM-PM components (described in Section 6, "Extending the Domain with SOA Components").
Run a third pass of the Configuration Wizard to install the Oracle UCM components (described in Chapter 7, "Extending the Domain with Oracle UCM").
Run a fourth pass of the Configuration Wizard to install the Oracle I/PM components (described in Chapter 8, "Extending the Domain with Oracle I/PM").
Oracle recommends this modular approach in order to facilitate the verification of individual components one by one. This building block approach simplifies the troubleshooting during the setup process and facilitates the configuration in smaller steps.
Some variation from the topology in Section 1.7, "Enterprise Deployment Reference Topology" is possible. For example, if a deployment chooses to install Oracle UCM alone, then only sections applicable to Oracle UCM need to be followed. Also, in this case, it is expected that the Administration Server will exist on ECMHOST1 instead and the instructions on creating the domain should be modified appropriately.