Oracle® Fusion Middleware Administrator's Guide for Oracle Internet Directory 11g Release 1 (11.1.1) E10029-02 |
|
![]() Previous |
![]() Next |
This appendix explains how to add a new node to an existing replicating system by using the database copy procedure, also known as cold backup. This procedure works only for Oracle Internet Directory. Do not employ this procedure if other Oracle Identity Management components, such as Oracle Single Sign-On, are installed. You can use the database copy procedure to create a new directory replication group (DRG) if you have a standalone Oracle Internet Directory node. This procedure is applicable for an Oracle Database Advanced Replication-based replica and for a full LDAP-based replica.
The sponsor site refers to the site or host or node where Oracle Internet Directory and its repository, the Oracle database, are installed. The sponsor site is also referred to as sponsor node.
The new site refers to the site or host or node to which you are copying the Oracle Internet Directory repository. The new site is also referred to as the new node.
Your computing environment must meet the following prerequisites before you start this procedure:
The operating system, version, and patch level of the new directory site must be the same as that of the sponsor directory site. This procedure might not work if the patch levels of the operating systems differ.
Oracle strongly recommends that you back up the sponsor directory's repository before you employ this procedure.
Because this procedure involves copying Oracle data files, performance depends on the underlying network. If the underlying network is slow, consider using one of the methods described in Chapter 37, "Setting Up Replication" or Appendix C, "Setting Up Oracle Database Advanced Replication-Based Replication" to set up a replication group. Alternatively, you could physically transfer compressed Oracle data files on removable media. Consult your local system or network administrator for information about the network.
Only a person familiar with the Oracle database should perform this procedure.
If the sponsor site is already a part of an Advanced Replication group, the sponsor node must be the Master definition site (MDS).
In the example shown throughout this chapter, the sponsor directory site's environment is as follows:
Hostname = rst-sun Domain name = example.com ORACLE_BASE = /private/oracle/app/oracle ORACLE_HOME = /private/oracle/app/oracle/product/OraHome_1 ORACLE_SID = LDAP LD_LIBRARY_PATH = $ORACLE_HOME/lib NLS_LANG = AMERICAN_AMERICA.AL32UTF8 datafile location = /private/oracle/oradata/LDAP Dump destination = /private/oracle/app/oracle/admin/LDAP/pfile, /private/oracle/app/oracle/admin/LDAP/bdump, /private/oracle/app/oracle/admin/LDAP/cdump, /private/oracle/app/oracle/admin/LDAP/udump, /private/oracle/app/oracle/admin/LDAP/create
In the example shown throughout this chapter, the new directory site's environment is as follows:
Hostname = dsm-sun Domain name = example.com ORACLE_BASE = /private1/oracle/app/oracle ORACLE_HOME = /private1/oracle/app/oracle/product/OraHome_1 ORACLE_SID = NLDAP LD_LIBRARY_PATH = $ORACLE_HOME/lib NLS_LANG = AMERICAN_AMERICA.AL32UTF8 datafile location = /private1/oracle/oradata/NLDAP Dump destination = /private1/oracle/app/oracle/admin/NLDAP/pfile, /private1/oracle/app/oracle/admin/NLDAP/bdump, /private1/oracle/app/oracle/admin/NLDAP/cdump, /private1/oracle/app/oracle/admin/NLDAP/udump, /private1/oracle/app/oracle/admin/NLDAP/create
Everything except the hostname and domain name is created during installation of the Oracle Database in Step 10.
Install the node and check its status, as follows:
Install Identity Management with the Oracle Internet Directory component on the sponsor node. See Oracle Fusion Middleware Installation Guide for Oracle Identity Management
See Also:
|
To check the status of Oracle Internet Directory, type:
$ cd ORACLE_INSTANCE/bin
$ ./opmnctl status
The status should be Alive
.
Shut down Oracle Internet Directory and all other opmn
processes on the sponsor node, as follows:
$ cd ORACLE_INSTANCE/bin
$ opmnctl stopall
Perform the following steps on the sponsor node.
At the command line prompt execute the following SQL*Plus commands:
$ sqlplus /nolog SQL> connect / as sysdba SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE RESETLOGS;
This command sequence creates a trace file under the user dump destination directory.
To determined the location of the user dump destination directory, execute following command:
SQL> show parameter user_dump_dest;
The name of the newly-created trace file is of the form:
ORACLE_SID_ora_processid.trc
Shut down the database and Oracle Net Services listener on the sponsor node. By default, the listener name is LISTENER. Type:
$ lsnrctl stop $ sqlplus /nolog SQL> connect / as sysdba SQL> shutdown SQL> exit
If the copied node is part of an Advanced Replication-based DRG, perform the following steps:
On other nodes of the DRG, shut down the LDAP replication server only.
$ oidctl connect=connect_string server=oidrepld \ instance=instance_number stop
Repeat this procedure on all nodes except the sponsor node. Specify appropriate net service names for the corresponding nodes.
If you are adding a node to an existing DRG, quiesce Oracle Database Advanced Replication by using SQL*Plus. Execute the following commands at the master definition site (MDS) only:
$ cd ORACLE_HOME/ldap/admin
$ sqlplus /nolog SQL> connect repadmin/repadmin_password;
SQL> @oidrsusp.sql
Note: Perform this SQL*Plus procedure only on the master definition site. |
Now that you have stopped replication, you can safely modify other nodes.
Rename the trace file created in Step 3a to newdb.sql
, under the same directory.
$ cp ORACLE_SID_ora_processid.trc newdb.sql
On the sponsor node, open newdb.sql
in a text editor and delete all the lines except the STARTUP
NOMOUNT
and CREATE
CONTROLFILE
statements. After deleting those lines, newdb.sql
should look like this:
STARTUP NOMOUNT CREATE CONTROLFILE REUSE SET DATABASE "LDAP" RESETLOGS NOARCHIVELOG MAXLOGFILES 16 MAXLOGMEMBERS 3 MAXDATAFILES 100 MAXINSTANCES 8 MAXLOGHISTORY 454 LOGFILE GROUP 1 '/private/oracle/oradata/LDAP/redo01.log' SIZE 10M, GROUP 2 '/private/oracle/oradata/LDAP/redo02.log' SIZE 10M, GROUP 3 '/private/oracle/oradata/LDAP/redo03.log' SIZE 10M -- STANDBY LOGFILE DATAFILE '/private/oracle/oradata/LDAP/system01.dbf', '/private/oracle/oradata/LDAP/sysaux01.dbf', '/private/oracle/oradata/LDAP/users01.dbf', '/private/oracle/oradata/LDAP/dcm.dbf', '/private/oracle/oradata/LDAP/portal.dbf', '/private/oracle/oradata/LDAP/ptldoc.dbf', '/private/oracle/oradata/LDAP/ptlidx.dbf', '/private/oracle/oradata/LDAP/ptllog.dbf', '/private/oracle/oradata/LDAP/oca.dbf', '/private/oracle/oradata/LDAP/discopltc1.dbf', '/private/oracle/oradata/LDAP/discopltm1.dbf', '/private/oracle/oradata/LDAP/oss_sys01.dbf', '/private/oracle/oradata/LDAP/wcrsys01.dbf', '/private/oracle/oradata/LDAP/uddisys01.dbf', '/private/oracle/oradata/LDAP/b2b_dt.dbf', '/private/oracle/oradata/LDAP/b2b_rt.dbf', '/private/oracle/oradata/LDAP/b2b_idx.dbf', '/private/oracle/oradata/LDAP/b2b_lob.dbf', '/private/oracle/oradata/LDAP/bam.dbf', '/private/oracle/oradata/LDAP/orabpel.dbf', '/private/oracle/oradata/LDAP/attrs1_oid.dbf', '/private/oracle/oradata/LDAP/battrs1_oid.dbf', '/private/oracle/oradata/LDAP/gcats1_oid.dbf', '/private/oracle/oradata/LDAP/gdefault1_oid.dbf', '/private/oracle/oradata/LDAP/svrmg1_oid.dbf', '/private/oracle/oradata/LDAP/ias_meta01.dbf', '/private/oracle/oradata/LDAP/undotbs.dbf' CHARACTER SET AL32UTF8 ;
Continue editing the file newdb.sql
on the sponsor node, as follows:
Change the line:
CREATE CONTROLFILE REUSE DATABASE "LDAP" RESETLOGS NOARCHIVELOG
to:
CREATE CONTROLFILE REUSE SET DATABASE "NLDAP" RESETLOGS NOARCHIVELOG
Modify the UNIX directory location of the database and logfiles to point to the new node site's directory.
In our example, after these modifications, newdb.sql
should look like this:
STARTUP NOMOUNT CREATE CONTROLFILE REUSE SET DATABASE "NLDAP" RESETLOGS NOARCHIVELOG MAXLOGFILES 16 MAXLOGMEMBERS 3 MAXDATAFILES 100 MAXINSTANCES 8 MAXLOGHISTORY 454 LOGFILE GROUP 1 '/private1/oracle/oradata/NLDAP/redo01.log' SIZE 10M, GROUP 2 '/private1/oracle/oradata/NLDAP/redo02.log' SIZE 10M, GROUP 3 '/private1/oracle/oradata/NLDAP/redo03.log' SIZE 10M -- STANDBY LOGFILE DATAFILE '/private1/oracle/oradata/NLDAP/system01.dbf', '/private1/oracle/oradata/NLDAP/sysaux01.dbf', '/private1/oracle/oradata/NLDAP/users01.dbf', '/private1/oracle/oradata/NLDAP/dcm.dbf', '/private1/oracle/oradata/NLDAP/portal.dbf', '/private1/oracle/oradata/NLDAP/ptldoc.dbf', '/private1/oracle/oradata/NLDAP/ptlidx.dbf', '/private1/oracle/oradata/NLDAP/ptllog.dbf', '/private1/oracle/oradata/NLDAP/oca.dbf', '/private1/oracle/oradata/NLDAP/discopltc1.dbf', '/private1/oracle/oradata/NLDAP/discopltm1.dbf', '/private1/oracle/oradata/NLDAP/oss_sys01.dbf', '/private1/oracle/oradata/NLDAP/wcrsys01.dbf', '/private1/oracle/oradata/NLDAP/uddisys01.dbf', '/private1/oracle/oradata/NLDAP/b2b_dt.dbf', '/private1/oracle/oradata/NLDAP/b2b_rt.dbf', '/private1/oracle/oradata/NLDAP/b2b_idx.dbf', '/private1/oracle/oradata/NLDAP/b2b_lob.dbf', '/private1/oracle/oradata/NLDAP/bam.dbf', '/private1/oracle/oradata/NLDAP/orabpel.dbf', '/private1/oracle/oradata/NLDAP/attrs1_oid.dbf', '/private1/oracle/oradata/NLDAP/battrs1_oid.dbf', '/private1/oracle/oradata/NLDAP/gcats1_oid.dbf', '/private1/oracle/oradata/NLDAP/gdefault1_oid.dbf', '/private1/oracle/oradata/NLDAP/svrmg1_oid.dbf', '/private1/oracle/oradata/NLDAP/ias_meta01.dbf', '/private1/oracle/oradata/NLDAP/undotbs.dbf' CHARACTER SET AL32UTF8 ;
Copy the initialization parameter file init
$ORACLE_SID
.ora
from the sponsor directory's database to init
$ORACLE_SID_NEW_DIR_DB
.ora
. The default location of the initialization parameter file is $ORACLE_HOME/dbs
on UNIX or Linux and %ORACLE_HOME%\database
on Windows. In our example, copy /private/oracle/app/oracle/product/OraHome_1/dbs/initLDAP.ora
to /private/oracle/app/oracle/product/OraHome_1/dbs/initNLDAP.ora
as shown here:
$ cd ORACLE_HOME/dbs
$ cp initLDAP.ora initNLDAP.ora
If you are using the server parameter file spfile$ORACLE_SID.ora
or spfile.ora
instead of an initialization parameter file, create an initialization parameter file from the server parameter file. For example, if spfile$ORACLE_SID.ora
is located in the default location $ORACLE_HOME/dbs
you would type:
$ sqlplus /nolog SQL> connect / as sysdba SQL> create pfile from spfile SQL> shutdown immediate
This sequence of commands creates an initLDAP.ora
file at /private/oracle/app/oracle/product/OraHome_1
from spfileLDAP.ora
. If the server parameter file is not located in the default location, you must include the complete path, as shown in the following example:
SQL> connect / as sysdba SQL> create pfile='/private/oracle/initLDAP.ora' from spfile=/private/oracle/initLDAP.ora SQL> shutdown immediate
After you create the initialization file parameter file, create a copy of it as explained at the beginning of this step.
In the new initialization parameter file on the sponsor, make the following changes:
Comment out the parameter JOB_QUEUE_PROCESSES
, if it exists.
Change the parameter dbname from LDAP
to NLDAP
.
If the new site's domain name is different from the sponsor directory's domain name, alter the parameter db_domain
also.
Alter the location of the following parameters to point to the location of the new site.
background_dump_dest core_dump_dest user_dump_dest control_files db_recovery_file_dest
In addition to the parameters listed in Step 7d, if your initialization parameter file has any parameters that are node specific, such as DB_RECOVERY_FILE_DEST
and DB_CREATE_FILE_DEST
, alter those parameters as well.
In our example, the initialization parameter file initNLDAP.ora
looks like this after these modifications:
*.aq_tm_processes=1 *.background_dump_dest='/private1/oracle/app/oracle/admin/NLDAP/bdump' *.compatible='10.1.0.2.0' *.control_files='/private1/oracle/app/oracle/admin/NLDAP/control01.ctl', '/private1/oracle/app/oracle/admin/NLDAP/control02.ctl', '/private1/oracle/app/oracle/admin/NLDAP/control03.ctl' *.core_dump_dest='/private1/oracle/app/oracle/admin/NLDAP/cdump' *.db_block_size=8192*.db_cache_size=50331648 *.db_domain='example.com' *.db_file_multiblock_read_count=16 *.db_name='NLDAP'*.db_recovery_file_dest='/private/oracle1/app/oracle/flash_recovery_area' *.db_recovery_file_dest_size=2147483648 *.dispatchers='(PROTOCOL=TCP)(PRE=oracle.aurora.server.GiopServer)', '(PROTOCOL=TCP)(PRE=oracle.aurora.server.SGiopServer)' *.java_pool_size=67108864#*.job_queue_processes=5 *.large_pool_size=8388608 *.max_commit_propagation_delay=0 *.open_cursors=300 *.pga_aggregate_target=33554432*.processes=150 *.remote_login_passwordfile='EXCLUSIVE' *.sessions=400 *.shared_pool_size=150994944 *.undo_management='AUTO' *.undo_tablespace='UNDOTBS' *.user_dump_dest='/private1/oracle/app/oracle/admin/NLDAP/udump'
Edit the tnsnames.ora
file to include connection details for the new node. Refer to the following sample file:
LDAP.ACME.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rst-sun)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ldap.acme.com) ) ) NLDAP.ACME.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = dsm-sun)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = nldap.acme.com) ) )
Create an archive of all the data files and compress the archived file. Be sure to include all the files listed under DATAFILE in newdb.sql
.
As an example, you could use the following commands to go to the database file location and generate a compressed archive called OID_DB.tar.Z
:
$ cd $ORACLE_BASE/oradata/$ORACLE_SID $ tar -cvf OID_db.tar *.dbf $ compress OID_db.tar
Install Oracle Database on the new node using the software only option. See the Oracle Database Installation Guide for your platform and Oracle Fusion Middleware Installation Guide for Oracle Identity Management.
When the software-0nly install on the new node has completed, the following directory exists:
/private1/oracle/app/oracle/product/OraHome_1/diag/rdbms
Create the following directories on the new node:
Datafile location: /private1/oracle/app/oracle/oradata/NLDAP
Dump destinations:
/private1/oracle/app/oracle/admin/NLDAP/adump
/private1/oracle/app/oracle/admin/NLDAP/udump
/private1/oracle/app/oracle/flash_recovery_area
Trace file location: /private1/oracle/app/oracle/product/OraHome_1/diag/rdbms/nldap/nldap/trace
Copy the archived file created on the sponsor node in Step 9 to the new node, using FTP or another appropriate tool. Change directory to the database file location on the new node, then use FTP to copy the archived file from rst-sun.
$ cd /private1/oracle/app/oracle/oradata/NLDAP $ ftp ftp> open rst-sun Connected to rst-sun.us.example.com. 220 rst-sun FTP server (UNIX(r) System V Release 4.0) ready. Name (rst-sun:oracle): 331 Password required for oracle. Password: 230 User oracle logged in. ftp> cd /private/oracle/oradata/LDAP 250 CWD command successful. ftp> binary 200 Type set to I. ftp> mget oradb.tar.Z
If the data files are very large (several gigabytes or terabytes) and the network bandwidth is low, consider using media, such as tape or disk, to move the compressed file from the sponsor to the new node.
Extract the archived file on the new node. For example:
$ uncompress oradb.tar.Z $ tar xvf oradb.tar
Ensure that the data files are extracted to the correct directory. In our example, it is /private1/oracle/oradata/NLDAP
If the sponsor node is part of an Advanced replication group, then perform the following steps:
Copy the initialization parameter file initLDAP.ora
from the sponsor node (rst-sun) to the new node under the UNIX directory $ORACLE_HOME/dbs
using a tool such as FTP. Rename the file to initNLDAP.ora.
Ensure that the contents of the copied file initLDAP.ora
are valid after copying.
Edit the file initLDAP.ora
. Change:
.db_name='NLDAP'
to
.db_name='LDAP'
Using a tool such as FTP, copy the file newdb.sql
you created on the sponsor node in Step 5 to the new node. Rename newdb.sql
to olddb.sql
.
Edit olddb.sql
. Change:
CREATE CONTROLFILE REUSE SET DATABASE "NLDAP" RESETLOGS NOARCHIVELOG
to:
CREATE CONTROLFILE REUSE SET DATABASE "LDAP" RESETLOGS NOARCHIVELOG
Make a copy of tnsnames.ora
called tnsnames.ora.bk
.
Edit tnsnames.ora
. Change:
LDAP.ACME.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rst-sun)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ldap.acme.com) ) ) NLDAP.ACME.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = dsm-sun)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = nldap.acme.com) ) )
to:
LDAP.ACME.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = dsm-sun)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ldap.acme.com) ) )
At the shell prompt on the new node, set the ORACLE_BASE
, ORACLE_HOME
, and ORACLE_SID
environment variables. For example (using the C shell):
$ setenv ORACLE_BASE /private1/oracle/app/oracle $ setenv ORACLE_HOME /private1/oracle/app/oracle/product/OraHome_1 $ setenv ORACLE_SID LDAP
In the same shell, execute olddb.sql
using SQL*Plus
as shown in the following example:
cd /private1/oracle/app/oracle/admin/NLDAP/udump $ sqlplus /nolog SQL> connect / as sysdba SQL> @olddb.sql SQL> shutdown normal SQL>exit
Start up the database and listener as follows:
$ sqlplus /nolog SQL> connect / as sysdba SQL> startup mount SQL> alter database open resetlogs SQL> exit $ lsnrctl start
If you have performed a database copy from a node that has Advanced replication configured with another node, you must delete the LDAP_REP replication group in the new node. To do so, execute the following command:
sqlplus rep_admin_db_account_name/password SQL> exec dbms_repcat.drop_master_repgroup( gname => 'LDAP_REP' ) SQL> shutdown immediate
Copy the initialization parameter file initLDAP.ora
from the sponsor node (rst-sun) to the new node under the UNIX directory $ORACLE_HOME/dbs
using FTP or another appropriate tool. Ensure that the contents of the copied file initLDAP.ora
are valid after copying.
On the new node, ensure that the following files do not exist in the directory $ORACLE_HOME/dbs
on UNIX or ORACLE_HOME\database
in Windows:
spfileNLDAP.ora
spfile.ora
If either of these files exists, the Oracle database uses that file instead of the initNLDAP.ora
file you copied from the sponsor node.
Using FTP or another appropriate tool, copy the file newdb.sql
you created on the sponsor node in Step 5 to the new node. For example:
$ cd /private1/oracle/app/oracle/admin/NLDAP/udump $ ftp ftp> open rst-sun ftp> cd /private1/oracle/app/oracle/admin/LDAP/udump ftp> mget newdb.sql
At the UNIX shell prompt on the new node, set ORACLE_BASE, ORACLE_HOME and ORACLE_SID environment variables. For example (using the C shell):
$ setenv ORACLE_BASE /private1/oracle/app/oracle $ setenv ORACLE_HOME /private1/oracle/app/oracle/product/OraHome_1 $ setenv ORACLE_SID NLDAP
In the same UNIX shell, execute newdb.sql
using SQL*Plus as shown in the following example:
$ sqlplus /nolog SQL> connect / as sysdba SQL> @newdb.sql SQL> shutdown normal SQL>exit
Complete the changes on the new node.
Start up the database and listener as follows:
$ sqlplus /nolog SQL> connect / as sysdba SQL> startup mount SQL> alter database open resetlogs SQL> exit $ lsnrctl start
Change the global database name of the new node.
SQL> connect / as sysdba SQL> alter database rename global_name to NLDAP; SQL> exit
Note that the new node ORACLE_SID IS NLDAP.
Add a temporary file to the tablespace using the following command:
SQL> connect / as sysdba SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'temp01.dbf' size 2000k; SQL> exit
The value 2000K
is just an example. Determine your own value based on the requirements of your environment.
Configure Oracle Internet Directory on the new node
Install WebLogic Server. See Oracle Fusion Middleware Installation Guide for Oracle WebLogic Server.
Install Oracle Internet Directory. See Oracle Fusion Middleware Installation Guide for Oracle Identity Management.
Note: When you configure Oracle Internet Directory on the new node, you must specify the information for the new node database (created in Step 10). |
Stop Oracle Internet Directory by using opmnctl
.
On the new node, delete the wallet files oidpwdlldap1
and oidpwdr*
at the new node and reset the ODS password
$ cd $ORACLE_HOME/OID/admin $ rm oidpwdlldap1 oidpwdr*
On the new node, reset the password and start the Oracle Internet Directory processes.
oidpasswd connect=nldap create_wallet=true
you are prompted to provide the current database password, enter a new database password, and confirm the new password.
Start Oracle Internet Directory on the new node by using the opmnctl
command.
$opmnctl startproc ias-component=oid1
At this point, Oracle Internet Directory on the new node is up and running. The replicaid value in new Oracle Internet Directory node, however, still has the replica id of the sponsor's node. Therefore, you must reset new node's replicaid. The new value of replicaid must be of the form hostname
_
sid
where:
hostname is the host name of the new node, without the domain name
sid is the ORACLE_SID
of the new node database
Ensure that all letters of the replicaid are in lower case.
Create a file, chgrid.ldif
, with the following contents:
dn:
changetype: modify
replace: orclreplicaid
orclreplicaid: new_replicaid
Using the ldapmodify
tool, change the replicaid:
$ORACLE_HOME/bin/ldapmodify -h new_node_host -p port_ldap_server -f chgrid.ldif
Because the replica id of the new node was changed in Step 23, you must re-create the relative replica entries for the new node, as follows:
$ remtool -pcleanup -bind "new_node_host:new_node_port/new_node_repl_pswd"
The remtool
command does report an error and prompt for input because there are no replica entries that correspond with the new replica id yet. The remtool
command uses your responses to rectify the error. Here is an example, with user input shown in boldface:
remtool -pcleanup -bind "new_node_host:new_node_port/new_node_repl_pswd" Error occurred while getting replication configuration information. This tool will try to rectify the problem if super user DN and password are provided. Do you want to continue? [y/n] : y Enter superuser DN : cn=orcladmin Enter superuser password : Enter new password of replication DN : Reenter new password of replication DN : DRG identified by replica ldap://new_node_host:new_node_port (new_replicaid) will be cleaned up. Do you want to continue? [y/n] : y ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Replica replica ldap://new_node_host:new_node_port (new_replicaid) has been cleaned up.
) In addition to renaming the replica subentry, you must change the orclreplicauri
, orclreplicasecondaryuri
and orclreplicastate
attributes of the replica subentry. You must modify the orclreplicauri
and orclreplicasecondaryuri
attributes to contain the URI of the new node's LDAP server. You must set the orclreplicastate
attribute must be set to 6
, which specifies to remtool
that this a database copy-based addnode. To change the values, proceed as follows.
Create an LDIF file, modsubentry.ldif
, with the following contents:
dn: orclreplicaid=new_replicaid,cn=replication configuration changetype: modify replace: orclreplicauri # Use your host name and port number # where ldap server is listening orclreplicauri: ldap://new_node_host:new_node_port/ --- replace:orclreplicasecondaryuri # Use your fully qualified host name and # the port number where ldap server is listening orclreplicasecondaryuri: ldap://new_node_host_with_domain_name:new_node_port/ ---- replace:orclreplicastate orclreplicastate: 6
Using the ldapmodify
tool, apply the changes to the directory:
$ ldapmodify -h new_node_host -p port_of_ldap_server -f modsubentry.ldif
Stop Oracle Internet Directory processes.
$opmnctl stopproc ias-component=oid1
Clean up the changelog tables at the new node.
$ sqlplus /nolog SQL> connect ods/ods_password; SQL> truncate table ods.ods_chg_log; SQL> truncate table ods.ods_chg_stat; SQL> truncate table ods.asr_chg_log;
If the new node is part of an Advanced Replication-based DRG, proceed as follows.
To configure Oracle Database Advanced Replication, if you are adding new node to an existing DRG, at the shell prompt, execute the following command:
$ remtool -addnode
To configureOracle Database Advanced Replication, if you are creating a new DRG consisting of sponsor node and new node, at the shell prompt, execute the following command:
$ remtool -asrsetup
Start up Oracle Internet Directory and the replication server on all the nodes, including the new node and the sponsor node.
Use the following command to start replication server:
oidctl connect=nldap server=OIDREPLD instance=1 \ flags="-p new_node_port -h new_node_host" start
If the new node is a full LDAP-based replication replica, configure LDAP-based Replication and add the full replica as fan-out, as follows:
Make sure that the database and Oracle Internet Directory server is running at the sponsor node.
On the sponsor node, type:
$ sqlplus /nolog SQL> connect / as sysdba SQL> startup SQL> exit $ lsnrctl start Start OID $opmnctl startproc ias-component=oid1
Check the status of Oracle Internet Directory by typing:
$opmnctl status
Configure LDAP-based replication using remtool
, as follows:
remtool -paddnode
Initialize the replication change status of the new replication agreement.
Get the maximum used change number from the sponsor node:
$ ldapsearch -h sponsor_node_host -p sponor_node_port -b " " \ -s base "objectclass=*" lastchangenumber
Create an LDIF file chgstatus.ldif, with the following contents:
dn: orclagreementid=new_agreement_id,orclreplicaid=new_replicaid,cn=replication configuration changetype: modify replace: orcllastappliedchangenumber;transport$sponsor_replicaid$new_replicaid orcllastappliedchangenumber;transport$sponsor_replicaid$new_replicaid: Number_from_ldapsearch - replace: orcllastappliedchangenumber;apply$sponsor_replicaid$new_replicaid orcllastappliedchangenumber;apply$sponsor_replicaid$new_replicaid: Number_from_ldapsearch
where Number_from_ldapsearch
refers to the maximum change number from the sponsor node that you obtained using the ldapsearch
command.
Using ldapmodify
, apply the change to both the sponsor node and the new node:
ldapmodify -p sponsor_node_port -h sponsor_node_host -v \ -f chgstatus.ldif ldapmodify -p new_node_port -h new_node_host -v -f chgstatus.ldif
Start up Oracle Internet Directory and the replication server on all the nodes. For one-way replication, you only need to start the replication server on the consumer node.