Oracle® Fusion Middleware Upgrade Guide for Oracle Data Integrator 11g Release 1 (11.1.1) E12642-01 |
|
![]() Previous |
![]() Next |
This chapter describes how to upgrade your existing Oracle Data Integrator 10g environment to Oracle Data Integrator 11g.
This chapter contains the following sections:
Task 1: Understand the Starting Points for Oracle Data Integrator
Task 2: Plan the Oracle Data Integrator Component Architecture
Task 3: If Necessary, Upgrade the Database that Contains the ODI Repository
Task 4: Copy (Clone) Existing 10g Master and Work Repositories
Task 5: Create a Backup of the ODI Repositories to be Upgraded
Task 7: Run Upgrade Assistant to Upgrade ODI Middle Tier and Repositories
The supported starting points for an upgrade depend on the components you will be upgrading and the components you have installed. This section describes the starting points for the following upgrade operations:
ODI Middle Tier Upgrade migrates an ODI 10g Run-time Agent configuration (drivers and odiparams
file parameters) to an ODI 11g Standalone Agent.
The starting point for the Middle Tier Upgrade is to have both an ODI 10g Run-Time Agent and an ODI 11g Standalone Agent installed on this machine.
Note: The Oracle Data Integrator 10g Release 3 (10.1.3) Data Quality products are not part of the standard Oracle Data Integrator 11g installation. These components must be installed as a separate installation and upgraded in a separate upgrade process.For information on upgrading these components, see Part II, "Upgrading Oracle Data Profiling and Oracle Data Quality". |
The database that contains the Oracle Data Integrator repository must be supported by Oracle Fusion Middleware 11g. The Upgrade Assistant supports Master and Work repository upgrades for databases listed below.
If your current database is not listed below or to validate that your database version is compatible with ODI 11g, see Task 3: If Necessary, Upgrade the Database that Contains the ODI Repository.
Oracle RDBMS
Microsoft SQL Server
Sybase Adaptive Server
NOTE: In order to upgrade repositories stored in Sybase, it is required that the repository is stored in a database with a page size of 4k or greater. If the repository is stored in a database with a smaller page size, the database should be migrated to a database of an appropriate page size before upgrading the repository.
For details on increasing the page size, refer to http://www.sybase.com/content/1021203/sybmigrate_wp.pdf
Hypersonic SQL
IBM DB2
IBM DB2/400
PostgreSQL
NOTE: The ODI 11gR1 Upgrade Assistant includes the drivers for all the supported databases except PostgreSQL. To use the Upgrade Assistant with PostgreSQL, you must download the latest JDBC driver from http://jdbc.postgresql.org/download.html
and copy it to the ODI_HOME/upgrade/jlib
directory where ODI_HOME
is the installation directory of Oracle Data Integrator 11g.
The Oracle Data Integrator 10g component architecture changed with ODI 11g. Although you can keep the same component organization as ODI 10g, Oracle recommends that you review the new components organization in "Introduction to Oracle Data Integrator" in Oracle Fusion Middleware Developer's Guide for Oracle Data Integrator to identify any architecture changes.
The database that contains the Oracle Data Integrator repositories must be supported by Oracle Fusion Middleware 11g. For the latest list of supported databases, see:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
For instructions on verifying that your database meets the requirements of Oracle Fusion Middleware 11g, see "Upgrading and Preparing Your Databases" in the Oracle Fusion Middleware Upgrade Planning Guide. Oracle recommends that you refer to your database-specific upgrade documentation for additional information.
Oracle recommends that you clone each original ODI 10g Master and Work repository before beginning the upgrade process. During the Master Repository upgrade process, the Upgrade Assistant will prompt you for the location and credentials of the cloned Master Repository and Work Repositories.
Caution: The Upgrade Assistant does not support the upgrade of repositories distributed on different instances or technologies.Both ODI 10g and ODI 11g support a repository configuration where the Master Repository can be on different database instances than the Work Repository. During the upgrade process, however, the Master Repository and all Work Repositories must reside on the same database instance. After the upgrade process they can be redistributed. Once both the Master and Work repositories are upgraded and optionally redistributed, you must update the Work Repositories connections defined in the Topology to match their post-upgrade location. See Section 4.2, "Updating the Work Repository Connection Parameters" for more information on updating the connection parameters to the Work Repository as defined in the Topology. |
The following sections provide basic schema cloning procedures for databases that are supported to host ODI repositories. For detailed information, refer to your database-specific documentation.
Note: The goal of this section is to stress the importance of creating a clone (or copy) of each of the ODI 10g repositories before you begin the upgrade process. The cloning procedures documented in this section are sample procedures for each of the ODI 11g supported databases. You are not restricted to using these procedures. Always use the cloning procedures that suit your specific needs. |
WARNING: Once you have completed the cloning process, DO NOT use your Oracle Data Integrator 10.1.3.5 client to validate that the cloning process worked properly. The Upgrade Assistant will perform validation checks on the cloned repositories before the upgrade. |
The following steps can be used to clone Oracle Database schemas for ODI:
Export ODI 10g Master and Work schema using Oracle Export Utility
Example:
exp userid=odi_master_10g/odi_master_10g file=/tmp/odi_master_10g.dmp exp userid=odi_work_10g/odi_work_10g file=/tmp/odi_work_10g.dmp exp userid=odi_work1_10g/odi_work1_10g file=/tmp/odi_work1_10g.dmp
Create Master and Work clone schemas
Using SQL*Plus, create Master and Work clone schemas and grant connect/resource privileges.
Example:
create user odi_master_10g_cp identified by odi_master_10g_cp; create user odi_work_10g_cp identified by odi_work_10g_cp; create user odi_work1_10g_cp identified by odi_work1_10g_cp; grant connect,resource to odi_master_10g_cp, odi_work_10g_cp,odi_work1_10g_cp;
Import Master and Work schema into cloned schemas using Oracle Import Utility.
Using Oracle Import, import the ODI 10g Master and Work schema dump into the cloned Master and Work schemas.
Example:
imp userid='system/manager' touser=odi_master_10g_cp fromuser=odi_master_10g file=/tmp/odi_master_10g.dmp imp userid='system/manager' touser=odi_work_10g_cp fromuser=odi_work_10g file=/tmp/odi_work_10g.dmp imp userid='system/manager' touser=odi_work1_10g_cp fromuser=odi_work1_10g file=/tmp/odi_work1_10g.dmp
The following steps can be used to clone Microsoft SQL 2005/2008 database schemas:
Export the ODI 10g Master and Work schemas using SQL Management Studio.
Example:
BACKUP DATABASE [odi_10g] TO DISK = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\odi_10g.bak' WITH INIT, NOSKIP;
Restore Master and Work schemas into the new database using SQL Management Studio.
Using SQL Management Studio Express perform the following:
Restore the Master and Work schemas.
Print logical names of files used to store the database.
Move the files used to store database.
Example:
RESTORE DATABASE [odi_10g_cp] FROM DISK = N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\odi_10g_cp.bak' WITH FILE = 1, MOVE N'odi_10g' TO N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\odi_10g_cp.mdf', MOVE N'odi_10g_log' TO N'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\odi_10g_cp_log.ldf', NOUNLOAD; go
Create login and user for cloned Master and Work schemas using SQL Management Studio.
Using SQL Management Studio Express, create logins and users to access cloned Master and Work schemas. Be sure to select the correct database instance in SQL Management Studio Express, as these commands are applied to the selected database instance.
Example:
create login odi_10g_cp with password=N'odi_10g_cp', default_database=odi_10g_cp, check_expiration = off, check_policy = off; go USE odi_10g_cp go create user odi_10g_cp for login odi_10g_cp; go USE odi_10g_cp go
To move the old schema to the new schema location, run the following SQL script:
NOTE: In the example below, the old schema name is odi_10g
and the new schema name is odi_10g_cp
.
CREATE SCHEMA [odi_10g_cp] AUTHORIZATION odi_10g_cp go . DECLARE @OldSchema AS varchar(255) DECLARE @NewSchema AS varchar(255) . SET @OldSchema = 'odi_10g' SET @NewSchema = 'odi_10g_cp' . DECLARE @sql AS varchar(MAX) SET @sql = CHAR(13) + CHAR(10) . SELECT @sql = @sql + 'ALTER SCHEMA [' + @NewSchema + '] TRANSFER [' + TABLE_SCHEMA + '].[' + TABLE_NAME + ']' + CHAR(13) + CHAR(10) FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = @OldSchema . EXEC (@sql) go
To finalize the schema move, run the following SQL query:
DROP SCHEMA [odi_10g] go drop user odi_10g; go alter user ua_master_c with default_schema = odi_10g_cp; go grant create table, create view, create procedure,create function to odi_10g_cp; go
Use the following steps to clone PostgreSQL database schemas:
Export ODI 10g Master and Work schemas using PostgreSQL Backup Utility.
Example:
pg_dump -U odi_master_10g --schema=odi_master_10g -Ft -f "c:/odi_master_10g.dmp.tar" odi_10g pg_dump -U odi_work_10g --schema=odi_work_10g -Ft -f "c:/odi_work_10g.dmp.tar" odi_10g pg_dump -U odi_work1_10g --schema=odi_work1_10g -Ft -f "c:/odi_work1_10g.dmp.tar" odi_10g
Create a clone of the database and the Master and Work users.
Using PostgreSQL Interactive Terminal, create a clone database and users for Master and Work clone schemas with SUPERUSER option.
Example:
psql -U postres CREATE ROLE odi_master_10g_cp WITH SUPERUSER LOGIN PASSWORD 'odi_master_10g_cp'; CREATE ROLE odi_work_10g_cp WITH SUPERUSER LOGIN PASSWORD 'odi_work_10g_cp'; CREATE ROLE odi_work1_10g_cp WITH SUPERUSER LOGIN PASSWORD 'odi_work1_10g_cp'; CREATE DATABASE odi_10g_cp with owner=odi_master_10g_cp;
Restore Master and Work schemas into clone database using PostgreSQL.
Using PostgreSQL Restore Utility, restore Master and Work schemas into cloned database.
Example:
pg_restore -O -U odi_master_10g_cp -d odi_10g_cp -C "c:/odi_master_10g.dmp.tar" pg_restore -O -U odi_work_10g_cp -d odi_10g_cp "c:/odi_work_10g.dmp.tar" pg_restore -O -U odi_work1_10g_cp -d odi_10g_cp "c:/odi_work1_10g.dmp.tar"
Configure Master and Work clone schemas.
Using PostgreSQL Interactive Terminal, set NOSUPERUSER for Master and Work clone schema users.
Example:
psql -U postres -d odi_10g_cp ALTER USER odi_master_10g_cp WITH NOSUPERUSER; ALTER USER odi_work_10g_cp WITH NOSUPERUSER; ALTER USER odi_work1_10g_cp WITH NOSUPERUSER;
Using PostgreSQL Interactive Terminal, rename Master and Work clone schemas.
Example:
ALTER SCHEMA odi_master_10g RENAME TO odi_master_10g_cp; ALTER SCHEMA odi_work_10g RENAME TO odi_work_10g_cp; ALTER SCHEMA odi_work1_10g RENAME TO odi_work1_10g_cp;
Chose one of the following procedures to clone IBM's DB2 Universal Database schemas:
Same Host Cloning Process for ODI 10g Master and Work Schemas
Different Host Cloning Process for ODI 10g Master and Work Schemas
Note: The Page size for database has to be 32768 (32k) and operating system users ODI_MASTER_10G_CP and ODI_WORK_10G_CP have to be created manually. |
Use the following steps to clone IBM DB2 schemas on the same host or platform:
Create DB2 Database using Command Line Processor.
Example:
db2 CREATE DATABASE ODI11 AUTOMATIC STORAGE YES ON 'C:\' DBPATH ON 'C:\' USING CODESET IBM-1252 TERRITORY US COLLATE USING SYSTEM PAGESIZE 32768
Copy ODI 10g Master and Work schemas using DB2 Database Movement Tool to new schema.
Master Schema Example:
db2move ODI10G COPY -sn odi_master_10g -co TARGET_DB ODI10GCP USER db2admin USING welcome SCHEMA_MAP ((odi_master_10g,odi_master_10g_cp)) TABLESPACE_MAP ((USERSPACE1,USERSPACE1),SYS_ANY) owner odi_master_10g_cp
Work Schema Example:
db2move ODI10G COPY -sn odi_work_10g -co TARGET_DB ODI10GCP USER db2admin USING welcome SCHEMA_MAP ((odi_work_10g,odi_work_10g_cp)) TABLESPACE_MAP ((USERSPACE1,USERSPACE1),SYS_ANY) owner odi_work_10g_cp
Use the following steps to clone IBM DB2 schemas on different hosts or platforms:
Export DDL and Data from Master and Work schemas using DB2 Database Movement Tool and DDL Extracting Tool.
DB2 Database Movement Tool produces PC/IXF files with data and db2move.lst
file with list of tables, Files are produced in the folder where the tool was called. The DDL Extracting Tool produces db2master.sql
and db2work.sql
with SQL queries to recreate database structure.
Example:
db2move ODI10G export -sn odi_master_10g,odi_work_10g db2master -d ODI10G -z odi_master_10g -e -o c:/db2master.sql db2work -d ODI10G -z odi_work_10g -e -o c:/db2work.sql
Transfer exported files to new location.
Ensure that the PC/IXF files were transferred in binary mode, and that the db2move.lst
file and the db2master.sql
and db2work.sql
files were transferred in ASCII mode.
Place the PC/IXF files where the DB2 Database Movement Tools is located.
Create DB2 database using Command Line Processor.
Example:
db2 CREATE DATABASE ODI10G AUTOMATIC STORAGE YES ON 'C:\' DBPATH ON 'C:\' USING CODESET IBM-1252 TERRITORY US COLLATE USING SYSTEM PAGESIZE 32768
Import the exported DDL to the new database using the Command Line Processor.
Example:
db2 -tvf c:/db2backup/db2master.sql db2 -tvf c:/db2backup/db2work.sql
Import exported data to new database using DB2 Database Movement Tool.
Example:
db2move ODI10G load
Verify that cloned schemas are intact; some tables may be in "check pending" state (because of check constraint).
Use command set integrity
to move to the normal state.
Example:
db2 set integrity for <table name> immediate checked
Use the following steps to clone IBM DB2 AS/400 database schemas:
Save ODI 10g Master and Work schemas.
Using Telnet Client, save the ODI 10g Master and Work schemas.
Example:
CRTLIB LIB(ODI10GDMP) TYPE(*TEST) CRTSAVF FILE(ODI10GDMP/ODIM10GDMP) CRTSAVF FILE(ODI10GDMP/ODIW10GDMP) SAVLIB ODIM10G DEV(*SAVF) SAVF(ODI10GDMP/ODIM10GDMP) ACCPTH(*YES) CLEAR(*ALL) SAVLIB ODIW10G DEV(*SAVF) SAVF(ODI10GDMP/ODIW10GDMP) ACCPTH(*YES) CLEAR(*ALL)
Create Master and Work clone schemas.
Using Telnet, create user profiles for the cloned schemas.
Example:
CRTUSRPRF USRPRF(ODIMCP) PASSWORD(ODIMCP) PWDEXP(*NO) CRTUSRPRF USRPRF(ODIWCP) PASSWORD(ODIWCP) PWDEXP(*NO)
Create ODI 10g Master and Work clone schemas.
Using iSeries Navigator or Interactive SQL (STRSQL), create ODI 10g Master and Work clone schemas.
Example:
CREATE SCHEMA AUTHORIZATION ODIMCP CREATE SCHEMA AUTHORIZATION ODIWCP
Restore ODI 10g Master and Work schemas into clone schemas.
Using Telnet, restore ODI 10g Master and Work schema into clone schemas.
Example:
RSTLIB SAVLIB(ODIM10G) DEV(*SAVF) SAVF(ODI10GDMP/ODIM10GDMP) OPTION(*NEW) RSTLIB(ODIMCP) RSTLIB SAVLIB(ODIW10G) DEV(*SAVF) SAVF(ODI10GDMP/ODIW10GDMP) OPTION(*NEW) RSTLIB(ODIWCP) CHGOWN OBJ('QSYS.LIB/ODIMCP.LIB/*.*') NEWOWN(ODIMCP) CHGOWN OBJ('QSYS.LIB/ODIWCP.LIB/*.*') NEWOWN(ODIWCP)
Using iSeries Navigator, select tables in schemas ODIM10G
and ODIW10G
to stop journalizing.
Select Journal from schema ODIM10G
: Databases>Denmlas3>Schemas>ODIM10G>Journals
Select file QSQJRN
.
Select Start or End Table Journaling from journal's context menu.
Select tables for schema ODIM10G
in 'Tables already journalized' view.
Click Remove to remove them.
Repeat steps a-e for Schema ODIW10G
(Use ODIW10G
instead of ODIM10G
).
Using iSeries Navigator, select tables in schemas ODIMCP
and ODIWCP
to start journalizing.
Example:
Select Journal from schema ODIMCP
: Databases->Denmlas3->Schemas->ODIMCP->Journals.
Select file QSQJRN
.
Select Start or End Table Journaling from journal's context menu.
Select schema ODIMCP
in tables' view.
Add all tables from schema ODIMCP
to 'Table to journal' view.
Check 'Journal both images' and 'Omit open/close entries' for them. Click OK.
Repeat steps a-f for Schema ODIWCP (Use ODIWCP instead of ODIMCP).
Use the following steps to clone Sybase AS Enterprise database schemas:
Export ODI 10g Master and Work schema using ISQL Utility.
Example:
isql -D odi -S STANE08 -U sa -P welcome dump database odi10g to "c:/odi10g.dmp" with init go
Restore Master and Work schemas into new database using ISQL Utility.
Using ISQL Utility, restore Master and Work schemas.
Example:
isql -S STANE08 -U sa -P welcome create database odi10gcp on master = 860 go load database odi10gcp from "c:/odi10g.dmp" with override go ONLINE DATABASE odi10gcp go
Create logins for cloned Master and Work schemas using ISQL Utility.
Using ISQL Utility, create logins to access the cloned Master and Work schemas.
Example:
sp_addlogin ODIMCP, ODIMCP, odi10gcp go sp_addlogin ODIWCP, ODIWCP, odi10gcp go
Rename original Master and Work schemas using ISQL Utility. Note that you cannot change the owner of a table or rename user. You must rename users directly.
Example:
sql -D odi10gcp -S STANE08 -U sa -P welcome sp_configure 'allow updates', 1 go update dbo.sysusers set name='ODIMCP' where name='ODI_MASTER_10G' go update dbo.sysusers set name='ODIWCP' where name='ODI_WORK_10G' go sp_configure 'allow updates', 0 go
Assign created logins to renamed users using ISQL Utility. Note that you cannot assign a login to a user. You must assign logins to users directly.
Example:
select suid from master.dbo.syslogins where name='ODIMCP' go NOTE: Use the returned suid 'ODIMCP' in the first update query below. select suid from master.dbo.syslogins where name='ODIWCP' go NOTE: Use returned suid 'ODIWCP' in the second update query below. sp_configure 'allow updates', 1 go update dbo.sysusers set suid=5 where name='ODIMCP' go update dbo.sysusers set suid=6 where name='ODIWCP' go sp_configure 'allow updates', 0 go
Use the following steps to clone Hypersonic SQL 1.7.3.3 database schemas:
Update server.properties
server.database.1=file:ODI/odi_10g_cp server.dbname.1=odi_10g_cp
Update sqltool.rc with new connection information:
urlid odicp_sa url jdbc:hsqldb:hsql://localhost/odi_10g_cp username SA password
Using SQL Tool, stop the server.
java -jar ./lib/hsqldb.jar odi_sa checkpoint; shutdown;
Copy database's file to the location of new database. ODI Uses MEMORY table therefore copy only properties and script files.
copy odi_10g.properties odi_10g_cp.properties copy odi_10g.script odi_10g_cp.script
Restart the server.
Using SQL Tool, create new logins for the cloned Oracle Data Integrator 10g database.
Example of SQL Queries:
create user odim10g_cp password odim10g_cp ADMIN create user odiw10g_cp password odiw10g_cp ADMIN drop user odim10g drop user odiw10g
Oracle recommends that you create a backup for each ODI Master and Work repository. The backup enables you to restore to a pre-upgrade state if necessary. For more information, see "Backup Strategies for Upgrade," in Oracle Fusion Middleware Upgrade Planning Guide.
The Upgrade Assistant Prerequisite screen prompts you to indicate whether the backup of the ODI repositories has been completed. It is important to note, however, that the Upgrade Assistant will not validate that a backup has been created.
Caution: This is a critical step of the upgrade process; especially if the repositories were not cloned. In the event that upgrade results are unsatisfactory, having a backup copy of the ODI repositories ensures that you will not lose important data. For more information on creating a backup, refer to your database backup and recovery documentation. |
Before running the Upgrade Assistant, use the Oracle Universal Installer to install and configure ODI 11g. Note that it is not necessary to run the Repository Configuration Utility (RCU), finalize the agent configuration, or configure Java EE components during the installation process.
The ODI installation and configuration procedures are documented in the Oracle Fusion Middleware Installation Guide for Oracle Data Integrator.
Note: You can complete Task 7b: Upgrade the Middle Tier Instance and Task 7c: Upgrade the Oracle Data Integrator Repositories in any order. |
The Oracle Fusion Middleware Upgrade Assistant automates the upgrade of many aspects of your Oracle Data Integrator 10g environment. Some post-upgrade configuration procedures may be required, however.
The Upgrade Assistant performs the following tasks and provides the progress on each task:
Prompts you to specify the existing 10g ODI home location (path).
Examines the components to be upgraded.
Provides a summary of the components to be upgraded so you can verify that the Upgrade Assistant is upgrading the components you expect.
Provides a progress screen so you can see the status of the upgrade as it proceeds.
Alerts you of any errors or problems that occur during the upgrade.
Displays the End of Upgrade screen, which confirms that the upgrade was complete.
The Upgrade Assistant is installed automatically into the /bin
directory of your Oracle Data Integrator home (ODI_HOME
).
To start the Upgrade Assistant using the graphical user interface:
Change directory to the ODI_HOME/bin
where ODI_HOME
is the installation folder of Oracle Data Integrator directory of the Oracle Fusion Middleware installation.
Enter the following command to start the Upgrade Assistant.
On UNIX system:
./ua
On Windows systems:
ua.bat
Provide the required information in each of the Upgrade Assistant screens.
The Middle Tier upgrade copies the ODI 10g Agent configuration information into the ODI 11g Standalone Agent. Java EE components and ODI Studio are not affected by the middle tier upgrade.
Note: You can perform the ODI upgrade operations in any order. If you want to upgrade the ODI repositories first, see Section 3.7.3. |
To upgrade the Middle Tier Instance, start the Upgrade Assistant as described in Task 7a: Run the Upgrade Assistant for Oracle Data Integrator and provide the required information in the following screens:
No. | Screen Name | When does this screen appear? | Description and Action Required |
---|---|---|---|
1 | Welcome |
Always | No action required. |
2 | Specify Operation |
Always | Select the Upgrade Middle Tier Instance option. |
3 | Specify Source Home |
Only if you selected Upgrade Middle Tier Instance on the Specify Operation screen. | Specify the location of the 10g Oracle home you want to upgrade. |
4 | Examine |
Always | The Upgrade Assistant performs a series of validations before upgrading the selected components. Ensure that all validations have succeeded. |
5 | Upgrade Summary |
Always | If the summary information looks correct, click Upgrade. |
6 | Upgrade Progress |
Always | The Upgrading Components screen shows the progress of the upgrade process. Once complete, click Next. |
7 | End of Upgrade |
Always | The Upgrade Complete screen provides a link to the upgrade log file. Review the log file and test the upgraded applications to ensure that they are working as expected. Click Close to dismiss the Upgrade Assistant. |
The Oracle Data Integrator Repository upgrade option upgrades the Oracle Data Integrator 10g repositories to ODI 11g versions. The ODI 10g repositories should always be cloned (copied) before launching the Upgrade Assistant. See Task 4: Copy (Clone) Existing 10g Master and Work Repositories.
To upgrade ODI Repositories, start the Upgrade Assistant as described in Task 7a: Run the Upgrade Assistant for Oracle Data Integrator and provide the required information in the following screens:
Caution: If the upgrade process fails, you must close the Upgrade Assistant, correct the issue, and then restart the Upgrade Assistant as described in Section 3.7.1.If the upgrade process fails after the upgrade process has started, you must drop the cloned repository and start from a freshly cloned repository in addition to correcting the underlying issue. There is no way to restart the failed upgrade process. |
No. | Screen Name | When does this screen appear? | Description and Action Required |
---|---|---|---|
1 | Welcome |
Always | No action required. |
2 | Specify Operation |
Always | Select Upgrade Oracle Data Integrator Repositories and choose which additional repository upgrade options you want to perform:
For more information on these options, see the Specify Operation screen description in Appendix A. |
3 | Prerequisites |
Only if you selected Upgrade Oracle Data Integrator Repositories on the Specify Operation screen. | The Upgrade Assistant requires that you indicate the following prerequisites have been met in order to continue the upgrade:
|
4 | Target Database |
Only if you selected Upgrade Oracle Data Integrator Repositories on the Specify Operation screen. | The Specify Target Database screen prompts you for the database type and DBA login credentials of the target database that hosts the Master and Work Repositories. You must also provide the database user name and password used to connect to the Master Repository and the ODI Supervisor name and password. |
5 | Specify Work Repositories |
Only if you selected Upgrade Oracle Data Integrator Repositories on the Specify Operation screen. | The Specify Work Repositories User Name screen prompts you to enter the database user names and passwords used to connect to each of the ODI 11g Work Repositories. |
6 | Examine |
Always | If status is succeeded for all components, click Next. If the examination fails for one or more of the components, click Back to review the information you entered. The log file will also provide important information. (The log file location is listed at the bottom of the screen.) |
7 | Upgrade Summary |
Always | If the summary information looks correct, click Upgrade. |
8 | Upgrade Progress |
Always | The Upgrading Components screen shows the progress of the upgrade process. Once complete, click Next. |
9 | End of Upgrade |
Always | The Upgrade Complete screen provides a link to the upgrade log file. Review the log file and test the upgraded applications to ensure that they are working as expected. Click Close to dismiss the Upgrade Assistant. |
Depending on the options you selected during the upgrade process, you may have to perform manual procedures to finalize the upgrade process.
Refer to Chapter 4, "Oracle Data Integrator Post-Upgrade Tasks" for a description of the post-upgrade tasks you might need to perform for each of the Oracle Data Integrator components.