This guide provides information about installing and using the command-line interface, arrconf. This command-line interface (CLI) can be used with RAID host bus adapters (HBAs), such as the Sun StorageTek SAS RAID HBAs.
To use the information in this document, you must have installed and configured the HBAs with which you want to use the CLI. For hardware installation and configuration instructions for Sun StorageTek SAS RAID HBAs, see the installation documentation at:
Chapter 1 describes how to install the command-line interface for your operating system.
Chapter 2 explains how to use the text-based command-line interface.
This document might not contain information about basic UNIX® commands and procedures such as shutting down the system, booting the system, and configuring devices. Refer to the following for this information:
|Note - Characters display differently depending on browser settings. If characters do not display correctly, change the character encoding in your browser to Unicode UTF-8.|
The following table lists the documentation for this product. The online documentation is available at:
Sun is not responsible for the availability of third-party web sites mentioned in this document. Sun does not endorse and is not responsible or liable for any content, advertising, products, or other materials that are available on or through such sites or resources. Sun will not be responsible or liable for any actual or alleged damage or loss caused by or in connection with the use of or reliance on any such content, goods, or services that are available on or through such sites or resources.
Sun is interested in improving its documentation and welcomes your comments and suggestions. You can submit your comments by going to:
Please include the title and part number of your document with your feedback:
Uniform Command-Line Interface User’s Guide, part number 820-2145-12