Skip Navigation Links | |
Exit Print View | |
![]() |
Oracle Solaris Cluster Hardware Administration Manual Oracle Solaris Cluster 4.0 |
1. Introduction to Oracle Solaris Cluster Hardware
2. Installing and Configuring the Terminal Concentrator
3. Installing Cluster Interconnect Hardware and Configuring VLANs
4. Maintaining Cluster Interconnect Hardware
5. Installing and Maintaining Public Network Hardware
6. Maintaining Platform Hardware
7. Campus Clustering With Oracle Solaris Cluster Software
Requirements for Designing a Campus Cluster
Selecting Networking Technologies
Complying With Quorum Device Requirements
Replicating Solaris Volume Manager Disksets
Guidelines for Designing a Campus Cluster
Determining the Number of Rooms in Your Cluster
Three-Room Campus Cluster Examples
Deciding How to Use Quorum Devices
Quorum in Clusters With Four Rooms or More
Quorum in Three-Room Configurations
Quorum in Two-Room Configurations
Determining Campus Cluster Connection Technologies
Cluster Interconnect Technologies
Storage Area Network Technologies
Installing and Configuring Interconnect, Storage, and Fibre Channel Hardware
While detailing all of the configurations that are possible in campus clustering is beyond the scope of this document, the following illustrations depict variations on the configurations that were previously shown.
Three-room campus cluster with a multipathing solution implemented (Figure 7-5)
Two-room campus cluster with a multipathing solution implemented (Figure 7-6)
Two-room campus cluster without a multipathing solution implemented (Figure 7-7)
Figure 7-5 Three-Room Campus Cluster With a Multipathing Solution Implemented
Figure 7-6 shows a two-room campus cluster that uses partner pairs of storage devices and four FC switches, with a multipathing solution implemented. The four switches are added to the cluster for greater redundancy and potentially better I/O throughput. Other possible configurations that you could implement include using Oracle's Sun StorEdge T3 partner groups or Oracle's Sun StorEdge 9910/9960 arrays with Sun StorEdge Traffic Manager software installed.
For information about Solaris I/O multipathing software for the Oracle Solaris 11 OS, see the Oracle Solaris Administration: SAN Configuration and Multipathing.
Figure 7-6 Two-Room Campus Cluster With a Multipathing Solution Implemented
The configuration in the following figure could be implemented by using Oracle's Sun StorEdge T3 or T3+ arrays in single-controller configurations, rather than partner groups.
Figure 7-7 Two-Room Campus Cluster Without a Multipathing Solution Implemented