Skip Navigation Links | |
Exit Print View | |
![]() |
Oracle Solaris Cluster Data Services Developer's Guide Oracle Solaris Cluster 4.0 |
1. Overview of Resource Management
3. Resource Management API Reference
6. Data Service Development Library
8. Sample DSDL Resource Type Implementation
9. Oracle Solaris Cluster Agent Builder
Advantages and Disadvantages of Using the GDS
Ways to Create a Service That Uses the GDS
GDS and Oracle Solaris Cluster Administration Commands
Selecting the Method to Use to Create a GDS-Based Service
Monitor_retry_interval Property
Using Agent Builder to Create a Service That Uses the GDS
Creating and Configuring GDS-Based Scripts
How to Start Agent Builder and Create the Scripts
Using Oracle Solaris Cluster Administration Commands to Create a Service That Uses the GDS
Command-Line Interface for Agent Builder
How to Use the Command-Line Version of Agent Builder to Create a Service That Uses GDS
12. Cluster Reconfiguration Notification Protocol
A. Sample Data Service Code Listings
B. DSDL Sample Resource Type Code Listings
C. Requirements for Non-Cluster-Aware Applications
D. Document Type Definitions for the CRNP
The GDS is a mechanism for making simple network-aware and non-network-aware applications highly available or scalable by plugging them into the Oracle Solaris Cluster Resource Group Management (RGM) framework. This mechanism does not require you to code a data service, which you typically must do to make an application highly available or scalable.
The GDS is a single, precompiled data service. You cannot modify the precompiled data service and its components, the callback method (rt_callbacks) implementations, and the resource type registration file (rt_reg).
This section covers the following topics:
The generic data service resource type SUNW.gds is included in the ha-cluster/ha-service/gds package. The ha-cluster/ha-service/gds package includes the following files:
# pkg contents ha-cluster/ha-service/gds PATH /opt/SUNWscgds /opt/SUNWscgds/bin /opt/SUNWscgds/bin/gds_monitor_check /opt/SUNWscgds/bin/gds_monitor_start /opt/SUNWscgds/bin/gds_monitor_stop /opt/SUNWscgds/bin/gds_probe /opt/SUNWscgds/bin/gds_svc_start /opt/SUNWscgds/bin/gds_svc_stop /opt/SUNWscgds/bin/gds_update /opt/SUNWscgds/bin/gds_validate /opt/SUNWscgds/etc /opt/SUNWscgds/etc/SUNW.gds /opt/cluster /opt/cluster/lib /opt/cluster/lib/rgm /opt/cluster/lib/rgm/rtreg /opt/cluster/lib/rgm/rtreg/SUNW.gds
Using the GDS has the following advantages over using either the Agent Builder source code (see the scdscreate(1HA) man page) or Oracle Solaris Cluster administration commands:
The GDS is easy to use.
The GDS and its methods are precompiled and therefore cannot be modified.
You can use Agent Builder to generate scripts for your application. These scripts are put in an Oracle Solaris package that can be reused across multiple clusters.
While using the GDS has many advantages, the GDS is not the mechanism to use in these instances:
When more control is required than is available with the precompiled resource type, such as when you need to add extension properties or change default values
When the source code needs to be modified to add special functions
There are two ways to create a service that uses the GDS:
Agent Builder
Oracle Solaris Cluster administration commands
Use Agent Builder and select GDS as the type of generated source code. The user input is used to generate a set of scripts that configure resources for the given application.
This method uses the precompiled data service code in ha-cluster/ha-service/gds. However, the cluster administrator must use Oracle Solaris Cluster administration commands to create and configure the resource. See the clresource(1CL) man page.
A significant amount of typing is required to issue Oracle Solaris Cluster commands. For example, see How to Use Oracle Solaris Cluster Administration Commands to Create a Highly Available Service That Uses the GDS and How to Use Oracle Solaris Cluster Administration Commands to Create a Scalable Service That Uses the GDS.
Using the GDS with Agent Builder simplifies the process because the GDS generates the scripts that issue the scrgadm and scswitch commands for you.
The GDS enables you to log relevant information that is passed from the GDS to the scripts that the GDS starts. This information includes the status of the start, probe, validate, and stop methods as well as property variables. You can use this information to diagnose problems or errors in your scripts, or apply it to other purposes.
You use the Log_level property that is described in Log_level Property to specify the level, or type, of messages that the GDS is to log. You can specify NONE, INFO, or ERR.
The following two GDS log files are placed in the directory /var/cluster/logs/DS/resource-group-name/resource-name:
start_stop_log.txt, which contains messages that are generated by resource start and stop methods
probe_log.txt, which contains messages that are generated by the resource monitor
The following example shows the types of information that start_stop_log.txt contains:
06/12/2006 12:38:05 phys-node-1 START-INFO> Start succeeded. [/home/brianx/sc/start_cmd] 06/12/2006 12:42:11 phys-node-1 STOP-INFO> Successfully stopped the application
The following example shows the types of information that probe_log.txt contains:
06/12/2006 12:38:15 phys-node-1 PROBE-INFO> The GDS monitor (gds_probe) has been started 06/12/2006 12:39:15 phys-node-1 PROBE-INFO> The probe result is 0 06/12/2006 12:40:15 phys-node-1 PROBE-INFO> The probe result is 0 06/12/2006 12:41:15 phys-node-1 PROBE-INFO> The probe result is 0
This section describes the required GDS properties.
The Port_list property identifies the list of ports on which the application listens. You must specify the Port_list property in the start script that Agent Builder creates or with the clresource command.
Whether you must specify this property depends on whether your application is network aware or not. If you specify that your application is network aware (you set the Network_aware property to TRUE, the default), you must provide both the Start_command extension property and the Port_list property. If you specify that your application is non-network aware (you set the Network_aware property to FALSE), you must provide only the Start_command extension property. The Port_list property is optional.
The start command, which you specify with the Start_command extension property, starts the application. This command must be a UNIX command with arguments that can be passed directly to a shell to start the application.
If your application is network aware, you must provide both the Start_command extension property and the Port_list property. If your application is non-network aware, you must provide only the Start_command extension property.
Optional GDS properties include both system-defined properties and extension properties. System-defined properties are a standard set of properties that are provided by Oracle Solaris Cluster. Properties that are defined in the RTR file are called extension properties.
Here are optional GDS properties:
Child_mon_level extension property (used only with administration commands)
Failover_enabled extension property
Log_level extension property
Monitor_retry_count extension property
Monitor_retry_interval extension property
Network_aware extension property
Network_resources_used property
Probe_command extension property
Probe_timeout extension property
Start_timeout property
Stop_command extension property
Stop_signal extension property
Stop_timeout property
Validate_command extension property
Validate_timeout property
Note - If you use Oracle Solaris Cluster administration commands, you can use the Child_mon_level property. If you use Agent Builder, you cannot use this property.
This property provides control over the processes that are monitored through the Process Monitor Facility (PMF). This property denotes the level up to which the forked children processes are monitored. This property works like the -C argument to the pmfadm command. See the pmfadm(1M) man page.
Omitting this property, or setting it to the default value of -1, has the same effect as omitting the -C option on the pmfadm command. That is, all children and their descendents are monitored.
This property controls the failover behavior of the resource. If this extension property is set to TRUE, the application fails over when the number of restarts exceeds the Retry_count within the Retry_interval number of seconds.
If this property is set to FALSE, the application does not restart or fail over to another node when the number of restarts exceeds the Retry_count within the Retry_interval number of seconds.
You can use this property to prevent the application resource from initiating a failover of the resource group. The default value for this property is TRUE.
Note - In future, use the Failover_mode property in place of the Failover_enabled extension property as Failover_mode better controls failover behavior. For more information, see the descriptions of the LOG_ONLY and RESTART_ONLY values for Failover_mode in the r_properties(5) man page.
This property specifies the level, or type, of diagnostic messages that are logged by the GDS. You can specify NONE, INFO, or ERR for this property. When you specify NONE, diagnostic messages are not logged by the GDS. When you specify INFO, only informational messages are logged. When you specify ERR, only error messages are logged. By default, the GDS does not log diagnostic messages (NONE).
This property specifies the number of times that the process monitor facility (PMF) restarts the fault monitor during the time window that the Monitor_retry_interval property specifies. This property refers to restarts of the fault monitor itself rather than to the resource. The system-defined properties Retry_interval and Retry_count control restarting of the resource.
This property specifies the time (in minutes) over which failures of the fault monitor are counted. If the number of times that the fault monitor fails exceeds the value that is specified in the extension property Monitor_retry_count within this period, the PMF does not restart the fault monitor.
This property specifies whether your application uses the network. By default, the GDS assumes that your application is network aware, that is, uses the network (Network_aware is set to TRUE).
If your application is network aware, you must provide both the Start_command extension property and the Port_list property. If your application is non-network aware, you must provide only the Start_command extension property.
This property specifies a list of logical host name or shared address network resources that are used by a resource. The default value for this property is the empty list. You must specify this property if the application needs to bind to one or more specific addresses. If you omit this property or you specify Null, the application listens on all addresses.
Before you create the GDS resource, a LogicalHostname or SharedAddress resource must already be configured. See the Oracle Solaris Cluster Data Services Planning and Administration Guide for information about how to configure a LogicalHostname or SharedAddress resource.
To specify a value, specify one or more resource names. Each resource name can contain one or more LogicalHostname resources or one or more SharedAddress resources. See the r_properties(5) man page for details.
This property specifies the probe command that periodically checks the health of a given application. This command must be a UNIX command with arguments that can be passed directly to a shell to probe the application. The probe command returns with an exit status of 0 if the application is running correctly.
The exit status of the probe command is used to determine the severity of the application's failure. This exit status, called the probe status, must be an integer between 0 (for success) and 100 (for complete failure). The probe status can also be a special value of 201, which causes the application to immediately fail over unless Failover_enabled is set to FALSE. The GDS probing algorithm uses the probe status to determine whether to restart the application locally or fail it over. See the scds_fm_action(3HA) man page for more information. If the exit status is 201, the application is immediately failed over.
If the probe command is omitted, the GDS provides its own simple probe. This probe connects to the application on the set of IP addresses that is derived from the Network_resources_used property or from the output of the scds_get_netaddr_list() function. See the scds_get_netaddr_list(3HA) man page for more information. If the connect succeeds, the connect disconnects immediately. If both the connect and disconnect succeed, the application is deemed to be running well.
Note - The probe that is provided with the GDS is only intended to be a simple substitute for the fully functioning application-specific probe.
This property specifies the timeout value for the probe command. See Probe_command Property for additional information. The default for Probe_timeout is 30 seconds.
This property specifies the start timeout for the start command. See Start_command Property for additional information. The default for Start_timeout is 300 seconds.
This property specifies the command that must stop an application and only return after the application has been completely stopped. This command must be a complete UNIX command that can be passed directly to a shell to stop the application.
If the Stop_command extension property is provided, the GDS stop method starts the stop command with 80 percent of the stop timeout. Regardless of the outcome of starting the stop command, the GDS stop method sends SIGKILL with 15 percent of the stop timeout. The remaining 5 percent of the time is reserved for housekeeping overhead.
If the stop command is omitted, the GDS tries to stop the application by using the signal specified in Stop_signal.
This property specifies a value that identifies the signal to stop an application through the PMF. See the signal(3HEAD) man page for a list of the integer values that you can specify. The default value is 15 (SIGTERM).
This property specifies the timeout for the stop command. See Stop_command Property for additional information. The default for Stop_timeout is 300 seconds.
This property specifies the absolute path to a command to invoke to validate the application. If you do not provide an absolute path, the application is not validated.
This property specifies the timeout for the validate command. See Validate_command Property for additional information. The default for Validate_timeout is 300 seconds.