| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris Administration: SAN Configuration and Multipathing Oracle Solaris 11 Information Library |
| Skip Navigation Links | |
| Exit Print View | |
|
|
Oracle Solaris Administration: SAN Configuration and Multipathing Oracle Solaris 11 Information Library |
1. Solaris I/0 Multipathing Overview
2. Fibre Channel Multipathing Configuration Overview
Configuring Multipathing I/O Features
Enabling and Disabling Multipathing
Enabling or Disabling Multipathing on a Per-Port Basis
Port Configuration Considerations
How to Configure Multipathing by Port
Configuring Third-Party Storage Devices
Third-Party Device Configuration Considerations
Configuring Third-Party Storage Devices: New Devices
How o Configure Third-Party Devices
Configuring Third-Party Storage Devices: Disabling Devices
How to Disable Third-Party Devices
Displaying Device Name Changes
Configuring Automatic Failback
How to Configure Automatic Failback
4. Administering Multipathing Devices (mpathadm)
6. Configuring Virtual Fibre Channel Ports
9. Configuring IPFC SAN Devices
10. Booting the Solaris OS From Fibre Channel Devices on x86 Systems
11. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
This chapter explains how to configure Solaris I/O multipathing features for FC devices in the Oracle Solaris OS. It also provides the considerations while enabling or disabling the multipathing feature on SPARC based systems, x86 based systems, on a per-port basis, and third-party storage devices.
The following topics are discussed:
|