CMDDES Messages 100-199
|
|
100
ERROR: Line too long in input form
説明
A line or continued line in the input form to the command is longer than the system defined maximum of 1024 bytes.
アクション
Edit your form and shorten the offending line to make it meet the restrictions of the system.
関連項目
mc(1)
101
ERROR: #FORM statement appears out of sequence
説明
A #FORM statement appears in the form after a non-comment statement other than the #SERVICE statement. #FORM statements are optional, but if present must be preceded only by comments and the #SERVICE statement.
アクション
Reorder the statements in your form to put the #FORM statement in the proper sequence and rerun the mask compiler.
関連項目
mc(1)
102
WARN: command is an unrecognized command
説明
The command command is an unrecognized command in the UFORM language. Valid commands are #SERVICE, #FORM, and #PAGE. The offending command is ignored and the rest of the form is processed.
アクション
Correct your form file and rerun the mask compiler.
関連項目
mc(1)
103
ERROR: Continuation line not found
説明
The continuation line for a line ending with a backslash character was not found. The form file cannot end with a line ending in a backslash.
アクション
Edit and correct your form file and rerun the mask compiler.
関連項目
mc(1)
104
ERROR: Invalid argument to STATUSLINE
説明
The argument to the STATUSLINE parameter of the #PAGE statement must have a positive numeric argument. An invalid argument has been supplied for this parameter.
アクション
Edit and correct your form file and rerun the mask compiler.
関連項目
mc(1)
105
ERROR: keyword is an invalid keyword in a #PAGE statement
説明
keyword is an invalid keyword for the #PAGE statement line in the current form. The only supported keywords for the #PAGE statement line are STATUSLINE and FLAGS.
アクション
Edit and correct your form to remove the invalid keyword from the #PAGE statement line.
関連項目
mc(1)
106
ERROR: Service name svcname is too long
説明
The service name svcname is longer than the system defined maximum of 15 characters for a service name.
アクション
Edit and correct your form to contain the correct service name and rerun the mask compiler.
関連項目
mc(1)
107
ERROR: keyword is an invalid keyword in a #SERVICE statement
説明
keyword is an invalid keyword for the #SERVICE statement line in the current form. The only supported keyword for the #SERVICE statement line is NAME.
アクション
Edit and correct your form to remove the invalid keyword from the #SERVICE statement line.
関連項目
mc(1)
108
ERROR: Invalid keyword
説明
A keyword on the indicated #SERVICE, #FORM, or #PAGE statement line is not formatted correctly. All keywords must be alphanumeric identifiers beginning with a letter or an underscore (_).
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
109
ERROR: Missing equals sign
説明
A keyword on the indicated #SERVICE, #FORM, or #PAGE statement line is not followed by an equals sign.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
110
ERROR: Invalid argument
説明
A keyword value on the indicated #SERVICE, #FORM, or #PAGE statement line is not formatted correctly. Keyword values must be double quoted strings or some other sequence of characters not containing blanks, tabs, or newlines.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
111
ERROR: Invalid FIRSTVAL function specification
説明
The FIRSTVAL function specification on the #FORM statement line is not formatted correctly. It must contain a function name, followed immediately by an open parentheses, '(', an optional user argument (no white space allowed, unless quoted), and a close parentheses, ')'.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
112
ERROR: FIRSTVAL user argument is too long
説明
The user argument value specified for the FIRSTVAL validation function on the #FORM statement line is longer than the system imposed maximum of 11 characters.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
113
ERROR: FIRSTVAL function name is too long
説明
The function name value specified for the FIRSTVAL validation function on the #FORM statement line is longer than the system imposed maximum of 11 characters.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
114
ERROR: Invalid LASTVAL function specification
説明
The LASTVAL function specification on the #FORM statement line is not formatted correctly. It must contain a function name, followed immediately by an open parentheses, '(', an optional user argument (no white space allowed, unless quoted), and a close parentheses, ')'.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
115
ERROR: LASTVAL user argument is too long
説明
The user argument value specified for the LASTVAL validation function on the #FORM statement line is longer than the system imposed maximum of 11 characters.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
116
ERROR: LASTVAL function name is too long
説明
The function name value specified for the LASTVAL validation function on the #FORM statement line is longer than the system imposed maximum of 11 characters.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
117
ERROR: Invalid argument to TRANMODE
説明
The argument specified for the TRANMODE keyword on the #FORM statement line is not one of the supported values. The supported values for this keyword are TRAN and NOTRAN.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
118
ERROR: Invalid argument to TRANTIME
説明
The argument specified for the TRANTIME keyword on the #FORM statement line has an invalid value. The value for this keyword must be a non-negative integer value.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
119
ERROR: Invalid argument to STATUSLINE
説明
The argument specified for the STATUSLINE keyword on the #FORM statement line has an invalid value. The value for this keyword must be a positive integer value.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
120
ERROR: Unrecognized keyword keyword in #FORM statement
説明
The indicated keyword appeared on a #FORM statement line and is not one of the supported keywords. Supported keywords include FIRSTVAL, LASTVAL, STATUSLINE, TRANMODE, and TRANTIME.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
121
ERROR: File file does not have a .m extension
説明
file does not end with the required .m extension and is not a '-' (indicating that stdin should be used as input to the mask compiler).
アクション
Correct your filename and retry the mask compiler.
関連項目
mc(1)
122
ERROR: Cannot start up m4
説明
The m4 preprocessor could not be invoked by mc to preprocess the users mask.
アクション
Either correct your PATH setting to find m4 on your system or use the -m option to disable the use of m4 if your application does not make use of this capability.
関連項目
mc(1)
123
ERROR: Cannot open file file
説明
file could not be opened by the mask compiler for processing.
アクション
Correct your filename and retry the mask compiler.
関連項目
mc(1)
124
ERROR: File name too big
説明
The file name for the form being compiled is longer than the system imposed maximum.
アクション
Shorten your file name and retry the mask compiler.
関連項目
mc(1)
125
ERROR: Cannot open output file
説明
The output file for the form being compiled could not be opened by the mask compiler for writing. The output file name is the input file name with the .m suffix changed to a .M suffix.
アクション
Correct the permissions on your directory and/or on an existing .M file and retry the mask compiler.
関連項目
mc(1)
126
ERROR: Service name not specified
説明
A service name was not associated with this form through a #SERVICE statement in the mask.
アクション
Edit and correct your form and rerun the mask compiler.
関連項目
mc(1)
128
ERROR: Maximum page count of maxpages exceeded
説明
The system imposed maximum on the number of pages in a single form has been exceeded.
アクション
Edit your mask form to reduce the number of pages and rerun the mask compiler.
関連項目
mc(1)
129
ERROR: Memory allocation failure
説明
An attempt to dynamically allocate memory from the operating system using malloc() failed while allocating a fielded buffer for processing the form. The occurrence of this error will cause mc to terminate processing.
アクション
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
If your form is exceptionally large, you may want to try reducing the size of your form and rerunning the mask compiler.
関連項目
mc(1), malloc(3) in UNIX system reference manuals
130
ERROR: Too many fields on a page
説明
A page in the form has exceeded the system imposed limit on the number of distinct field areas that can exist on a single page.
アクション
Edit your mask form and reduce the number of fields in use on the offending page by combining them or splitting fields into different pages.
関連項目
mc(1)
131
ERROR: Default and validation machine size exceeded
説明
The form being compiled has exceeded the system imposed limit on the number of default and validation strings that may be specified on a single page in the form.
アクション
Edit your form to reduce the number of default and validation fields in use and rerun the mask compiler.
関連項目
mc(1)
132
ERROR: Float pool size exceeded
説明
The limit on the size of the internal system pool used to map floating point input in the users mask has been exceeded.
アクション
Edit your form and reduce the use of floating point values in use and rerun the mask compiler.
関連項目
mc(1)
133
ERROR: Literal pool full, mask compiler terminating
説明
The literal pool used internally in the mask compiler has been filled. This pool is 10,000 bytes in size and is used to hold images of strings in the mask being compiled.
アクション
Reduce the size and/or number of strings in your mask and rerun the mask compiler. If this is not feasible, then you may need to split your mask into multiple masks to pass compilation.
関連項目
mc(1)
134
ERROR: More than one flag for one group in FLAGS field
説明
More than one flag that relates to a particular attribute was specified in a FLAGS field within the mask. For example, the L, U, and P flags all relate to the TYPE attribute and only one of them may be specified at a time.
アクション
Modify the mask to remove the extraneous flag specification and rerun the mask compiler.
関連項目
mc(1)
135
ERROR: flag is an invalid flag
説明
flag is an invalid flag value for a mask.
アクション
Correct your mask and rerun the mask compiler.
関連項目
mc(1)
136
ERROR: ROW value greater than max_rows
説明
A relative ROW specification in the mask file is greater than the maximum max_rows. The maximum number of rows is by default 24 but may be overridden by the -r option on the command line.
アクション
Correct your mask and rerun the mask compiler.
関連項目
mc(1)
137
ERROR: ROW value greater than max_rows
説明
An absolute ROW specification in the mask file is greater than the maximum max_rows. The maximum number of rows is by default 24 but may be overridden by the -r option on the command line.
アクション
Correct your mask and rerun the mask compiler.
関連項目
mc(1)
138
ERROR: Syntax error in ROW field
説明
ROW parameter values must be integer numeric optionally preceded by a + or - to indicate a relative row number. A ROW specification in the current mask failed to match this specification.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
139
ERROR: COL value greater than max_cols
説明
A relative COL specification in the mask file is greater than the maximum max_cols. The maximum number of columns is by default 80 but may be overridden by the -c option on the command line.
アクション
Correct your mask and rerun the mask compiler.
関連項目
mc(1)
140
ERROR: COL value greater than max_cols
説明
An absolute COL specification in the mask file is greater than the maximum max_cols. The maximum number of columns is by default 80 but may be overridden by the -c option on the command line.
アクション
Correct your mask and rerun the mask compiler.
関連項目
mc(1)
141
ERROR: Syntax error in COL field
説明
COL parameter values must be integer numeric optionally preceded by a + or - to indicate a relative column number. A COL specification in the current mask failed to match this specification.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
142
ERROR: Number expected in MIN field
説明
A non-numeric value was specified for a MIN parameter in the mask being compiled.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
143
ERROR: LINES attribute set to 0 for mask field
説明
The LINES attribute for a mask field is specified as 0. LINES specifications must be either a - (indicating 1 line) or an unsigned positive integer.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
144
ERROR: Number expected in LINES field
説明
A non-numeric value was specified for the LINES attribute of a mask entry. LINES specifications must be either a - (indicating 1 line) or an unsigned positive integer.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
145
ERROR: WIDTH attribute 0 or negative for mask field
説明
The WIDTH attribute for a mask field was specified as 0 or a negative number. This attribute must be a positive integer.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
146
ERROR: Required flag missing in FLAGS field
説明
A flag from a required flag group has not been specified in the FLAGS attribute for a mask field. There are currently no required flag groups so this error should not occur.
アクション
Contact your BEA TUXEDO system Technical Support.
関連項目
mc(1)
147
ERROR: Literal field can not span multiple lines
説明
A mask field with the literal flag specified (L) has a LINES attribute that is not 1. Literal fields must be on a single line.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
148
ERROR: WIDTH specified for literal field
説明
A WIDTH attribute other than dash (-) was specified for a literal field in the mask. Literal fields must specify a dash for the width and allow the mask compiler to compute the width required.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
149
ERROR: Number expected in WIDTH field
説明
A non-numeric value was specified for the WIDTH attribute of a non-literal mask field.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
150
ERROR: FML field identifier fldid could not be resolved
説明
The field identifier fldid could not be resolved through the application field tables.
アクション
Correct the mask and/or your field tables and rerun the mask compiler.
関連項目
mc(1)
151
ERROR: Syntax error in VALUE field
説明
The syntax of a VALUE attribute in the mask is in error.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
152
ERROR: Memory allocation failure
説明
An attempt to dynamically allocate memory from the operating system using malloc() failed while processing the fielded buffer identifiers associated with the mask. The occurrence of this error will cause mc to terminate processing.
アクション
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
関連項目
mc(1), malloc(3) in UNIX system reference manuals
153
ERROR: FML field identifier fldid could not be resolved
説明
The field identifier fldid could not be resolved through the application field tables.
アクション
Correct the mask and/or your field tables and rerun the mask compiler.
関連項目
mc(1)
154
ERROR: Row is negative
説明
The ROW specified for a mask field is negative. This is most likely due to an incorrect negative relative row specification.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
155
ERROR: Column is negative
説明
The COL specified for a mask field is negative. This is most likely due to an incorrect negative relative column specification.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
156
ERROR: Column is too big
説明
A COL specification in the mask file is greater than the maximum. The maximum number of columns is by default 80 but may be overridden by the -c option on the command line.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
157
ERROR: Extra fields at end of line
説明
Extra fields are specified at the end of a basic descriptor statement in the mask.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
158
ERROR: MIN value is greater than WIDTH value
説明
The MIN attribute value specified for a basic descriptor statement in the mask is greater than the WIDTH attribute value of the same statement.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
159
ERROR: keyword is an illegal keyword in an extended descriptor line
説明
The indicated keyword, keyword, is not a valid keyword for an extended descriptor statement in a mask form. The valid keywords for extended descriptor statements are HELP, ERR, DFLT, VAL, MENU, and FORMEXIT.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
160
ERROR: EDL line appears after a literal field description
説明
Extended descriptor statement lines are not allowed to appear after literal fields.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
161
ERROR: More than one edltype line for bdl
説明
A single basic descriptor statement line (bdl) has more than one of the indicated type, edltype, of extended descriptor statement lines associated with it.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
162
ERROR: Missing '=' on extended descriptor statement line
説明
An extended descriptor statement line is missing the required equal (=) sign following the edl statement type identifier.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
163
ERROR: VAL or DFLT edl contains invalid separator separator
説明
A DFLT or VAL extended descriptor statement line (edl) contains an invalid separator (separator) instead of the required colon (:).
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
164
ERROR: More than one MENU/FORMEXIT extended descriptor line
説明
A single basic descriptor statement line (bdl) has more than one MENU or FORMEXIT extended descriptor statement lines (edls) associated with it.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
165
ERROR: MENU line allowed only on unprotected field
説明
MENU extended descriptor statement lines are only allowed when associated with a basic descriptor statement line describing an unprotected field.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
166
ERROR: Only one MENU field allowed per form
説明
Only one MENU extended descriptor statement line is allowed per form.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
167
ERROR: MENU or FORMEXIT statement missing value specification
説明
A MENU or FORMEXIT extended descriptor statement line is missing the value portion of one of its value=action pairs in the comma separated list. This is a violation of the syntax specified for these statements.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
168
ERROR: Invalid FORMEXIT value
説明
A FORMEXIT extended descriptor statement line contains a value that is not one of the permissible values, F0-F9, F11, or *.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
169
ERROR: Expected '=' in MENU/FORMEXIT list
説明
A MENU or FORMEXIT extended descriptor statement line contains a value that was not followed by the required equal sign (=).
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
170
ERROR: Invalid MENU/FORMEXIT type type
説明
A MENU or FORMEXIT extended descriptor statement line contains a type type that is not one of the permissible values (F, f, S, s, C, c, A, or a).
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
171
ERROR: Expected ':' in MENU/FORMEXIT line missing
説明
A MENU or FORMEXIT extended descriptor statement line is missing the required colon (:) separator in the argument portion of the value=argument specification.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
172
ERROR: Invalid action type type
説明
A MENU extended descriptor statement line has an invalid action type indicated in the suboption field for a value that has indicated action, 'A' or 'a', in the option field.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
173
ERROR: value not recognized on this edl line
説明
The extended descriptor statement line value value is not allowed for the extended descriptor statement type on which it is specified.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
174
ERROR: Mask value value is too large for processing
説明
The mask value value is too large to be processed. The mask must be changed to reduce the size of the indicated value.
アクション
Correct the mask and rerun the mask compiler.
関連項目
mc(1)
175
ERROR: val is an illegal numeric range
説明
While parsing a validation line, a non-numeric value was found for a numeric range.
アクション
Correct the syntax error and re-compile the mask.
関連項目
mc(1)
176
ERROR: val is an illegal integer range
説明
While parsing a validation line, a non-numeric or decimal value was found for a integer range.
アクション
Correct the syntax error and re-compile the mask.
関連項目
mc(1)
177
ERROR: val is an illegal regular expression
説明
While parsing a validation line, an invalid value was found for a regular expression validation. The valid syntax is specified by _gp_recomp(3).
アクション
Correct the syntax error and re-compile the mask.
関連項目
mc(1), _gp_recomp(3)
178
ERROR: val is an illegal literal
説明
While parsing a validation line, an invalid value was found for a literal value.
アクション
Currently, this error is never printed (the program prints another error and exits first).
関連項目
mc(1)
179
ERROR: val is an illegal function declaration
説明
While parsing a validation line, an invalid function declaration was found.
アクション
Correct the syntax error and re-compile the mask.
関連項目
mc(1)
180
ERROR: val is an illegal date description
説明
While parsing a validation line, an invalid date description was found.
アクション
Correct the syntax error and re-compile the mask.
関連項目
mc(1)
181
ERROR: No arguments were expected on this edl since there was no colon
説明
The extended definition line did not have a tag followed by a colon but did have additional information on the line.
アクション
Correct the syntax and re-compile the mask.
関連項目
mc(1)
182
ERROR: Too few arguments on edl. val is the minimum
説明
The extended definition line did not have enough information.
アクション
Correct the syntax and re-compile the mask.
関連項目
mc(1)
183
ERROR: Too many arguments on edl. val is the maximum
説明
The extended definition line had too much information.
アクション
Correct the syntax and re-compile the mask.
関連項目
mc(1)
184
ERROR: lseek failed..aborting
説明
An input/output error occurred while processing the mask. The program will exit.
アクション
Contact your BEA TUXEDO system Technical Support.
関連項目
mc(1)
186
ERROR: READING LINE number OUT OF SPACE
説明
An attempt dynamically to allocate memory from the operating system failed while processing a form in pic_uform. Additional information about the problem is printed as part of the message.
アクション
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
187
ERROR: line val -Inconsistent line length in multi-line field
説明
An error occurred while processing a multi-line field. The length of the lines is not consistent.
アクション
Correct the line lengths to be consistent.
関連項目
pic_uform(1)
188
ERROR: line val -multi-line field not terminated
説明
An error occurred while processing a multi-line field. The field was not properly terminated.
アクション
Correct the termination.
関連項目
pic_uform(1)
189
ERROR: program: could not open filename
説明
The specified input file could not be opened for reading.
アクション
Check the file that it exists and that you have read permission.
関連項目
udfk(1)
191
ERROR: program: line lineno...keyword is too long
説明
A syntax error occurred while parsing the input file. The specified keyword is too long. It must be less than or equal to 9 characters in length.
アクション
Correct the syntax and re-run the command.
関連項目
udfk(1)
192
ERROR: program: line lineno..keyword is a nonexistent code
説明
A syntax error occurred while parsing the input file. The specified keyword is not recognized.
アクション
Correct the syntax and re-run the command.
関連項目
udfk(1)
199
ERROR: mcdis: Could not open file
説明
The file file could not be processed by mcdis. This error can occur for a number of reasons. The most common reasons are that the environment variable MASKPATH is not set correctly or the file name is specified incorrectly. The error can occur also if the mask file has been corrupted.
アクション
Correct your MASKPATH setting and/or filename if necessary and rerun the mask disassembler. If these things do not correct the problem, the mask may be corrupted and you may need to regenerate it before it can be used.
関連項目
mcdis(1)
 |
 |
 |