Oracle® Fusion Middleware WebLogic Scripting Tool Command Reference 11g Release 1 (10.3.5) E13813-10 |
|
![]() Previous |
![]() Next |
The following sections summarize the WebLogic Server WLST commands, as follows:
WebLogic Server WLST Command Summary, Alphabetically By Command
WebLogic Server WLST Offline Command Summary
Note: You can list a summary of all online and offline commands from the command-line using the following commands, respectively:help("online") help("offline") |
For information about custom WLST commands for Fusion Middleware (FMW) components, refer to the appropriate chapter in this document. For information on how to run FMW custom commands, see "Using Custom WLST Commands" in the Oracle Fusion Middleware Administrator's Guide.
The following tables summarizes each of the WebLogic Server WLST commands, alphabetically by command. This table does not include custom WLST commands for FMW components. For a list of custom commands for a given FMW component, refer to the appropriate chapter in this document.
Table 2-1 WebLogic Server WLST Command Summary
This command... | Enables you to... | Use with WLST... |
---|---|---|
|
Activate changes saved during the current editing session but not yet deployed. |
Online |
|
Adds new command help for a command to an existing command group. Once added to the group, the command (along with a brief description) is displayed in the command list for the group when you enter the |
Online or Offline |
|
Adds a new help command group to those shown by the WLST |
Online or Offline |
|
Add a JMX listener to the specified MBean. |
Online |
|
Extend the current WebLogic domain using an application or service extension template. |
Offline |
|
Assign resources to one or more destinations. |
Offline |
|
Cancel an edit session, release the edit lock, and discard all unsaved changes. This operation can be called by any user with administrator privileges, even if the user did not start the edit session. |
Online |
|
Navigate the hierarchy of configuration or runtime beans. |
Online or Offline |
|
Close the current WebLogic domain. |
Offline |
|
Close the current domain template. |
Offline |
|
Convert an existing server configuration ( |
Online or Offline |
|
Connect WLST to a WebLogic Server instance. |
Online or Offline |
|
Create a configuration bean of the specified type for the current bean. |
Online or Offline |
|
Return the current location in the hierarchy. |
Online |
|
Navigate to the root of custom MBeans that are registered in the Runtime MBean Server. |
Online |
|
Delete an instance of a configuration bean of the specified type for the current configuration bean. |
Online or Offline |
|
Deploy an application to a WebLogic Server instance. |
Online |
|
Disconnect WLST from a WebLogic Server instance. |
Online |
|
Copy the deployment bundle to the specified targets. |
Online |
|
Navigate to the last MBean to which you navigated in the domain configuration hierarchy or to the root of the hierarchy, |
Online |
|
Navigate to the tree of custom MBeans that are registered in the Domain Runtime MBean Server. |
Online |
|
Navigate to the last MBean to which you navigated in the domain runtime hierarchy or to the root of the hierarchy, |
Online |
|
Display stack trace from the last exception that occurred while performing a WLST action, and reset the stack trace. |
Online or Offline |
|
Display all variables used by WLST, including their name and value. |
Online or Offline |
|
Navigate to the last MBean to which you navigated in the configuration edit MBean hierarchy or to the root of the hierarchy, |
Online |
|
Encrypt the specified string. |
Online |
|
Exit WLST from the user session and close the scripting shell. |
Online or Offline |
|
Execute a query against the specified log file. |
Offline |
exportDiagnosticDataFromServer |
Executes a query on the server side and retrieves the exported WebLogic Diagnostic Framework (WLDF) data. |
Online |
|
Find MBeans and attributes in the current hierarchy. |
Online |
|
Return the value of the specified attribute. |
Online or Offline |
|
Return the latest |
Online |
|
Returns a list of the previously captured diagnostic images. |
Online |
|
Return the latest |
Online |
|
Return the MBean by browsing to the specified path. |
Online |
|
Return the |
Online |
|
Return the MBean path for the specified MBean instance. |
Online |
|
Return the WebLogic |
Online |
|
Invoke a management operation on the current configuration bean. |
Online |
|
Determine whether a server restart is required. |
Online |
|
Navigates to the JNDI tree for the server to which WLST is currently connected. |
Online |
|
List all applications that are currently deployed in the domain. |
Online |
|
List all the children MBeans that can be created or deleted for the |
Online |
|
Load an application and deployment plan into memory. |
Online or Offline |
|
Load SQL files into a database. |
Offline |
|
Load property values from a file. |
Online and Offline |
|
Look up the specified MBean. |
Online |
|
List all child beans and/or attributes for the current configuration or runtime bean. |
Online or Offline |
|
Display help from |
Online |
|
Migrate services to a target server within a cluster. |
Online |
|
Determine whether WLST is connected to Node Manager. |
Online |
|
Connect WLST to Node Manager to establish a session. |
Online or Offline |
|
Disconnect WLST from a Node Manager session. |
Online or Offline |
|
Enroll the machine on which WLST is currently running. |
Online |
|
Generates the Node Manager property files, |
Online |
|
Kill the specified server instance that was started with Node Manager. |
Online or Offline |
|
Return the Node Manager log. |
Online or Offline |
|
Return the server output log of the server that was started with Node Manager. |
Online or Offline |
|
Return the status of the server that was started with Node Manager. |
Online or Offline |
|
Start a server in the current domain using Node Manager. |
Online or Offline |
|
Return the Node Manager server version. |
Online or Offline |
|
Toggle the display of path information at the prompt. |
Online or Offline |
|
Display the current location in the configuration or runtime bean hierarchy. |
Online or Offline |
|
Open an existing WebLogic domain for updating. |
Offline |
|
Open an existing domain template for WebLogic domain creation. |
Offline |
|
Reload classes and redeploy a previously deployed application. |
Online |
|
Redirect WLST output to the specified filename. |
Online or Offline |
|
Remove a listener that was previously defined. |
Online |
|
Resume a server instance that is suspended or in |
Online |
|
Save the edits that have been made but have not yet been saved. |
Online |
saveDiagnosticImageCaptureFile |
Downloads the specified diagnostic image capture. |
Online |
saveDiagnosticImageCaptureEntryFile |
Downloads a specific entry from the diagnostic image capture. |
Online |
|
Navigate to the last MBean to which you navigated in the runtime MBean hierarchy or to the root of the hierarchy, |
Online |
|
Set the specified attribute value for the current configuration bean. |
Online or Offline |
|
Set options related to a WebLogic domain creation or update |
Offline |
|
Show the changes made by the current user during the current edit session. |
Online |
|
Show all listeners that are currently defined. |
Online |
|
Gracefully shut down a running server instance or cluster. |
Online |
|
Start a Managed Server instance or a cluster using Node Manager. |
Online |
|
Start an application, making it available to users. |
Online |
|
Start a configuration edit session on behalf of the currently connected user. |
Online |
|
Start Node Manager at default port (5556). |
Online or Offline |
|
Record all user interactions with WLST; useful for capturing commands to replay. |
Online or Offline |
|
Start the Administration Server. |
Online or Offline |
|
Returns a map of servers or clusters and their state using Node Manager. |
Online |
|
Stop an application, making it un available to users. |
Online |
|
Stop the current edit session, release the edit lock, and discard unsaved changes. |
Online |
|
Stop Node Manager. |
Online or Offline |
|
Stop recording WLST commands. |
Online or Offline |
|
Stop the redirection of WLST output to a file. |
Online or Offline |
|
Create a user configuration file and an associated key file. |
Online |
|
Suspend a running server. |
Online |
|
Display a thread dump for the specified server. |
Online or Offline |
|
Undeploy an application from the specified servers. |
Online |
|
Update an application configuration using a new deployment plan. |
Online |
|
Update and save the current domain. |
Offline |
|
Unassign applications or services from one or more destinations. |
Offline |
|
Revert all unsaved or unactivated edits. |
Online |
|
Validate the changes that have been made but have not yet been saved. |
Online |
|
Display information about an MBean, such as the attribute names and values, and operations. |
Online |
|
Write the domain configuration information to the specified directory. |
Offline |
|
Convert WLST definitions and method declarations to a Python ( |
Online or Offline |
|
Writes the domain configuration information to the specified domain template. |
Offline |
The following table summarizes the WebLogic Server WLST online commands, alphabetically by command. This table does not include custom WLST commands for FMW components. For a list of custom commands for a given FMW component, refer to the appropriate chapter in this document.
Table 2-2 WebLogic Server WLST Online Command Summary
This command... | Enables you to... |
---|---|
|
Activate changes saved during the current editing session but not yet deployed. |
|
Adds new command help for a command to an existing command group. Once added to the group, the command (along with a brief description) is displayed in the command list for the group when you enter the |
|
Adds a new help command group to those shown by the WLST |
|
Add a JMX listener to the specified MBean. |
|
Cancel an edit session, release the edit lock, and discard all unsaved changes. This operation can be called by any user with administrator privileges, even if the user did not start the edit session. |
|
Navigate the hierarchy of configuration or runtime beans. |
|
Convert an existing server configuration ( |
|
Connect WLST to a WebLogic Server instance. |
|
Create a configuration bean of the specified type for the current bean. |
|
Return the current tree location. |
|
Navigate to the root of custom MBeans that are registered in the Runtime MBean Server. |
|
Delete an instance of a configuration bean of the specified type for the current configuration bean. |
|
Deploy an application to a WebLogic Server instance. |
|
Disconnect WLST from a WebLogic Server instance. |
|
Copy the deployment bundle to the specified targets. |
|
Navigate to the last MBean to which you navigated in the domain configuration hierarchy or to the root of the hierarchy, |
|
Navigate to the tree of custom MBeans that are registered in the Domain Runtime MBean Server. |
|
Navigate to the last MBean to which you navigated in the domain runtime hierarchy or to the root of the hierarchy, |
|
Display stack trace from the last exception that occurred, and reset the trace. |
|
Display all variables used by WLST, including their name and value. |
|
Navigate to the last MBean to which you navigated in the configuration edit MBean hierarchy or to the root of the hierarchy, |
|
Encrypt the specified string. |
|
Exit WLST from the interactive session and close the scripting shell. |
exportDiagnosticDataFromServer |
Execute a query on the server side and retrieves the exported WebLogic Diagnostic Framework (WLDF) data. |
|
Find MBeans and attributes in the current hierarchy. |
|
Return the value of the specified attribute. |
|
Return the latest |
|
Returns a list of the previously captured diagnostic images. |
|
Return the latest |
|
Return the MBean by browsing to the specified path. |
|
Return the |
|
Return the MBean path for the specified MBean instance. |
|
Return the WebLogic |
|
Invoke a management operation on the current configuration bean. |
|
Determine whether a server restart is required. |
|
Navigates to the JNDI tree for the server to which WLST is currently connected. |
|
List all applications that are currently deployed in the domain. |
|
List all the children MBeans that can be created or deleted for the |
|
Load an application and deployment plan into memory. |
|
Load property values from a file. |
|
Look up the specified MBean. |
|
List all child beans and/or attributes for the current configuration or runtime bean. |
|
Display help from |
|
Migrate services to a target server within a cluster. |
|
Determine whether WLST is connected to Node Manager. |
|
Connect WLST to Node Manager to establish a session. |
|
Disconnect WLST from a Node Manager session. |
|
Enroll the machine on which WLST is currently running. |
|
Generates the Node Manager property files, |
|
Kill the specified server instance that was started with Node Manager. |
|
Return the Node Manager log. |
|
Return the server output log of the server that was started with Node Manager. |
|
Return the status of the server that was started with Node Manager. |
|
Start a server in the current domain using Node Manager. |
|
Return the Node Manager server version. |
|
Toggle the display of path information at the prompt. |
|
Display the current location in the configuration or runtime bean hierarchy. |
|
Reload classes and redeploy a previously deployed application. |
|
Redirect WLST output to the specified filename. |
|
Remove a listener that was previously defined. |
|
Resume a server instance that is suspended or in |
|
Save the edits that have been made but have not yet been saved. |
saveDiagnosticImageCaptureFile |
Downloads the specified diagnostic image capture. |
saveDiagnosticImageCaptureEntryFile |
Downloads a specific entry from the diagnostic image capture. |
|
Navigate to the last MBean to which you navigated in the configuration MBean hierarchy or to the root of the hierarchy, |
|
Navigate to the last MBean to which you navigated in the runtime MBean hierarchy or to the root of the hierarchy, |
|
Set the specified attribute value for the current configuration bean. |
|
Show the changes made by the current user during the current edit session. |
|
Show all listeners that are currently defined. |
|
Gracefully shut down a running server instance or cluster. |
|
Start a Managed Server instance or a cluster using Node Manager. |
|
Start an application, making it available to users. |
|
Start a configuration edit session on behalf of the currently connected user. |
|
Start Node Manager at default port (5556). |
|
Record all user interactions with WLST; useful for capturing commands to replay. |
|
Start the Administration Server. |
|
Returns a map of servers or clusters and their state using Node Manager |
|
Stop an application, making it un available to users. |
|
Stop the current edit session, release the edit lock, and discard unsaved changes. |
|
Stop Node Manager. |
|
Stop the redirection of WLST output to a file. |
|
Create a user configuration file and an associated key file. |
|
Suspend a running server. |
|
Display a thread dump for the specified server. |
|
Undeploy an application from the specified servers. |
|
Revert all unsaved or unactivated edits. |
|
Update an application configuration using a new deployment plan. |
|
Validate the changes that have been made but have not yet been saved. |
|
Display information about an MBean, such as the attribute names and values, and operations. |
|
Convert WLST definitions and method declarations to a Python ( |
The following table summarizes the WebLogic Server WLST offline commands, alphabetically by command.
Table 2-3 WebLogic Server WLST Offline Command Summary
This command... | Enables you to... |
---|---|
|
Adds new command help for a command to an existing command group. Once added to the group, the command (along with a brief description) is displayed in the command list for the group when you enter the |
|
Adds a new help command group to those shown by the WLST |
|
Extend the current domain using an application or service extension template. |
|
Assign resources to one or more destinations. |
|
Navigate the hierarchy of configuration or runtime beans. |
|
Close the current domain. |
|
Close the current domain template. |
|
Convert an existing server configuration ( |
|
Connect WLST to a WebLogic Server instance. |
|
Create a configuration bean of the specified type for the current bean. |
|
Delete an instance of a configuration bean of the specified type for the current configuration bean. |
|
Display stack trace from the last exception that occurred while performing a WLST action, and reset the stack trace. |
|
Display all variables used by WLST, including their name and value. |
|
Exit WLST from the interactive session and close the scripting shell. |
|
Execute a query against the specified log file. |
|
Return the value of the specified attribute. |
|
Load an application and deployment plan into memory. |
|
Load SQL files into a database. |
|
Load property values from a file. |
|
List all child beans and/or attributes for the current configuration or runtime bean. |
|
Connect WLST to Node Manager to establish a session. |
|
Toggle the display of path information at the prompt. |
|
Display the current location in the configuration or runtime bean hierarchy. |
|
Open an existing WebLogic domain for updating. |
|
Open an existing domain template for domain creation. |
|
Redirect WLST output to the specified filename. |
|
Set the specified attribute value for the current configuration bean. |
|
Set options related to a WebLogic domain creation or update. |
|
Start Node Manager at default port (5556). |
|
Record all user interactions with WLST; useful for capturing commands to replay. |
|
Start the Administration Server. |
|
Stop Node Manager. |
|
Stop the redirection of WLST output to a file. |
|
Display a thread dump for the specified server. |
|
Unassign applications or services from one or more destinations. |
|
Update and save the current domain. |
|
Write the domain configuration information to the specified directory. |
|
Convert WLST definitions and method declarations to a Python ( |
|
Writes the domain configuration information to the specified domain template. |