Policy Execution Scheduling



You can configure a policy execution scheduler at the level of the Enterprise Gateway process. This enables you to schedule the execution of any policy on a specified date and time in a recurring manner. The Enterprise Gateway provides a pre-configured library of schedules to select from when creating a policy execution scheduler. You can also add your own schedules to the globally available library in the Policy Studio.

You can use policy execution scheduling in any policy circuit (for example, to perform a message health check). This feature is also useful when polling a service to enforce a Service Level Agreement (for example, to ensure the response time is less than 1000 ms, and if not, to send an alert).

Cron Expressions

In the Policy Studio, policy execution schedules are based on cron expressions. A cron expression is a string that specifies a time schedule for executing a policy. It consists of six required fields and one optional field, each separated by a space, which together specify when run the policy. For example, the following expression specifies to run at 10:15am every Monday, Tuesday, Wednesday, Thursday and Friday in 2011:

0 15 10 ? * MON-FRI 2011

The following table shows the syntax used for each field:
Field Values Special Characters
Seconds 0-59 , - * /
Minutes 0-59 , - * /
Hours 0-23 , - * /
Day of Month 1-31 , - * ? / L W
Month 1-12 or JAN-DEC , - * /
Day of Week 1-7 or SUN-SAT , - * ? / L #
Year (optional) empty or 1970-2199 , - * /

Special Characters
The special characters are explained as follows:
Special Character Description
, Separates values in a list (for example, MON,WED,SAT means Mondays, Wednesdays and Saturdays only).
- Specifies a range of values (for example, 2011-2015 means every year between 2011 and 2015 inclusive).
* Specifies all values of the field (for example, every minute).
? Specifies no value in the Day of Month and Day of Week fields. This enables you to specify a value in one field, but not in the other.
/ Specifies time increments (for example, in the Minutes field, 0/15 means minutes 0, 15, 30, and 45, while 5/15 means minutes 5, 20, 35, and 50). Specifying * before the / is the same as specifying 0 as the start value. The / character enables you to turn on every nth value in the set of values for the specified field. For example, 7/6 in the month field only turns on month 7, and does not mean every 6th month.
L Specifies the last value in the Day of Month and Day of Week fields. In the Day of Month field, this means the last day of the month (for example, January 31, or February 28 in non-leap years). In the Day of Week field, when used alone, this means 7 or SAT. When used after another value, it means the last XXX day of the month (for example, 5L means the last Thursday of the month). When using the L character, do not specify lists or ranges because this can give confusing results.
W Specifies the weekday (Monday-Friday) nearest the given day. For example, 15W means the nearest weekday to the 15th of the month. If the 15th is a Saturday, the policy runs on Friday 14th. If the 15th is a Sunday, the policy runs on Monday 16th. If the 15th is a Tuesday, it runs on Tuesday 15th. However, if you specify 1W, and the 1st is a Saturday, the policy runs on Monday 3rd to avoid crossing the month boundary. You can only specify the W character for a single day, and not a range or list of days.
# Specifies the nth XXX weekday of the month in the Day of Week field. For example, a value of FRI#2 means the second Friday of the month. However, if you specify #5, and there are not 5 of the specified Day of the Week in the month, no policy is run that month. When the # character is specified, there can only be one expression in the Day of Week field (for example, 2#1,6#4 is not valid because there are two expressions).

The following are some of the cron expressions provided in the Schedule Library in the Policy Studio:
Cron Expression Description
0 15 10 ? * * Run at 10:15am every day.
0 15 10 ? * 6L 2011-2015 Run at 10:15am on every last Friday of every month during the years 2011, 2012, 2013, 2014, and 2015.
0 15 10 ? * 6#3 Run at 10:15am on the third Friday of every month.
0 0 10 1,15 * ? Run at 10am on the 1st and 15th days of the month.
0 10,44 14 ? 3 WED Run at 2:10pm and at 2:44pm every Wednesday in the month of March.
0,30 * * ? * SAT,SUN Run every 30 seconds but only on Weekends (Saturday and Sunday).
0 0/5 14,18 * * ? Run every 5 minutes starting at 2pm and ending at 2:55pm, and every 5 minutes starting at 6pm and ending at 6:55pm, every day.
0 0-5 14 * * ? Run every minute starting at 2pm and ending at 2:05pm, every day.

Important Notes:
Please note the following:

  • Support for specifying both a Day of Week and a Day of Month value is not complete. You must use the ? or * character in one of these fields.
  • Overflowing ranges with a larger number on the left than the right are supported (for example, 21-2 for 9pm until 2am , or OCT-MAR). However, overuse may cause problems with daylight savings (for example, 0 0 14-6 ? * FRI-MON).

Adding a Schedule

To add a schedule to the globally available library in the Policy Studio, perform the following steps:

  1. Click the Policies tab on the left.
  2. Select the Schedule Library node.
  3. Click the Add button at the bottom of the Schedules screen.
  4. In the Schedules dialog, enter a Name (for example, Run every 30 seconds).
  5. Enter a Cron expression (for example, 0/30 * * * * ?).
  6. Click OK.

You can also edit or delete a selected schedule using the appropriate button.

Adding a Policy Execution Scheduler

To add a policy execution scheduler in the Policy Studio, perform the following steps:

  1. Click the Services tab on the left.
  2. Right-click the Process node (for example, the default Oracle Enterprise Gateway), and select Add policy execution scheduler.
  3. Click the button next to the Schedule field, select a cron expression in the dialog, and click OK.
  4. Click the button next to the Policy field, select a policy in the dialog, and click OK.
  5. Click OK.