Oracle® Enterprise Manager

Cloud Control Management Repository Views Reference

12c Release 4 (12.1.0.4)

E57277-03

October 2015

Oracle Enterprise Manager Cloud Control Management Repository Views Reference, 12c Release 4 (12.1.0.4)

E57277-03

Copyright © 2011, 2015 Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Contents

Preface

- Audience

- Documentation Accessibility

- Related Documents

- Conventions

What's Changed in this Guide?

1 Introducing Management Repository Views

- 1.1 About Management Repository Views

- 1.2 Using Management Repository Views

2 Blackout Views

- 2.1 MGMT$BLACKOUT_HISTORY

- 2.2 MGMT$BLACKOUTS

3 Chargeback Views

- 3.1 MGMT$EMCT_CBA_CHARGE_HOURLY

- 3.2 MGMT$EMCT_CBA_CHARGE_DAILY

4 Compliance Views

- 4.1 MGMT$COMPLIANCE_STANDARD_RULE

- 4.2 MGMT$COMPLIANCE_STANDARD

- 4.3 MGMT$COMPLIANCE_STANDARD_GROUP

- 4.4 MGMT$CS_EVAL_SUMMARY

- 4.5 MGMT$COMPOSITE_CS_EVAL_SUMMARY

- 4.6 MGMT$CS_RULE_EVAL_SUMMARY

- 4.7 MGMT$CS_GROUP_EVAL_SUMMARY

- 4.8 MGMT$CS_TARGET_ASSOC

- 4.9 MGMT$CSR_CURRENT_VIOLATION

- 4.10 MGMT$CSR_VIOLATION_CONTEXT

- 4.11 MGMT$EM_RULE_VIOL_CTXT_DEF

- 4.12 MGMT$RULE_KEYWORD

- 4.13 MGMT$CS_KEYWORD

- 4.14 MGMT$CS_GROUP_KEYWORD

- 4.15 MGMT$CS_RULE_ATTRS

- 4.16 MGMT$CS_HIERARCHY

- 4.17 MGMT$CS_RQS_HIERARCHY

- 4.18 MGMT$CS_RULEFOLDER

- 4.19 MGMT$CSG_HIERARCHY

- 4.20 MGMT$CSG_SUBGROUP

- 4.21 MGMT$CSR_TARGET_ASSOC

- 4.22 MGMT$CSRF_TARGET_ASSOC

- 4.23 MGMT$REPO_RULE_CHK_DETAILS

- 4.24 MGMT$REPOSITORY_RULE_BIND_VARS

- 4.25 MGMT$REPOSITORY_RULE_PARAMS

- 4.26 MGMT$CS_TGT_ASSOC_TXF_REQ

- 4.27 MGMT$EM_CS_RULE_EVENT_ERROR

- 4.28 MGMT$CCC_ALL_OBS_BUNDLES

- 4.29 MGMT$CCC_ALL_OBSERVATIONS

- 4.30 MGMT$CCC_ALL_VIOLATIONS

- 4.31 MGMT$COMPLIANT_TARGETS

- 4.32 MGMT$COMPLIANCE_SUMMARY

- 4.33 MGMT$COMPLIANCE_TREND

5 Configuration Management Views

- 5.1 Configuration Management Views

- 5.1.1 MGMT$CSA_COLLECTIONS

- 5.1.2 MGMT$CSA_FAILED

- 5.1.3 MGMT$CSA_HOST_OS_COMPONENTS

- 5.1.4 MGMT$CSA_HOST_SW

- 5.1.5 MGMT$CSA_HOST_COOKIES

- 5.1.6 MGMT$CSA_HOST_CUSTOM

- 5.1.7 MGMT$CSA_HOST_RULES

- 5.1.8 MGMT$CSA_HOST_CPUS

- 5.1.9 MGMT$CSA_HOST_IOCARDS

- 5.1.10 MGMT$CSA_HOST_NICS

- 5.1.11 MGMT$CSA_HOST_OS_PROPERTIES

- 5.1.12 MGMT$CSA_HOST_OS_FILESYSEMS

- 5.2 Custom Configuration Specification Views

- 5.2.1 MGMT$CCS_DATA

- 5.2.2 MGMT$CCS_DATA_SOURCE

- 5.2.3 MGMT$CCS_DATA_VISIBLE

- 5.2.4 MGMT$CCS_DATA

- 5.3 Database Configuration Views

- 5.3.1 MGMT$DB_TABLESPACES

- 5.3.2 MGMT$DB_DATAFILES

- 5.3.3 MGMT$DB_CONTROLFILES

- 5.3.4 MGMT$DB_DBNINSTANCEINFO

- 5.3.5 MGMT$DB_FEATUREUSAGE

- 5.3.6 MGMT$DB_INIT_PARAMS

- 5.3.7 MGMT$DB_LICENSE

- 5.3.8 MGMT$DB_REDOLOGS

- 5.3.9 MGMT$DB_ROLLBACK_SEGS

- 5.3.10 MGMT$DB_SGA

- 5.3.11 MGMT$DB_TABLESPACES_ALL

- 5.3.12 MGMT$DB_OPTIONS

- 5.4 Enterprise Configuration Management Views

- 5.4.1 MGMT$ECM_CMP_JOBS

- 5.4.2 MGMT$ECM_CMP_JOB_LAST_RESULTS

- 5.4.3 MGMT$ECM_CMP_RPT_CCS_DS

- 5.4.4 MGMT$ECM_CMP_RPT_CCS_DS_DTLS

- 5.4.5 MGMT$ECM_CMP_RPT_CCS_PD_ALL

- 5.4.6 MGMT$ECM_CMP_RPT_CCS_PD_DIFFS

- 5.4.7 MGMT$ECM_CMP_RPT_CI_DIFFS

- 5.4.8 MGMT$ECM_CMP_VISIBLE_CONFIGS

- 5.4.9 MGMT$ECM_CURRENT_SNAPSHOTS

- 5.4.10 MGMT$ECM_VISIBLE_SNAPSHOTS

6 Events Views

- 6.1 MGMT$INCIDENTS

- 6.2 MGMT$INCIDENT_CATEGORY

- 6.3 MGMT$INCIDENT_TARGET

- 6.4 MGMT$INCIDENT_ANNOTATION

- 6.5 MGMT$EVENTS_LATEST

- 6.6 MGMT$EVENTS

- 6.7 MGMT$EVENT_ANNOTATION

- 6.8 MGMT$PROBLEMS

- 6.9 MGMT$PROBLEM_ANNOTATION

7 Hardware Views

- 7.1 Hardware Views

- 7.1.1 MGMT$HW_CPU_DETAILS

- 7.1.2 MGMT$HW_NIC

- 7.1.3 MGMT$HW_NIC_BONDS

- 7.1.4 MGMT$HW_IO_DEVICES

- 7.1.5 MGMT$EM_ECM_HOST_VIRTUAL

- 7.1.6 MGMT$HW_HOSTS_FILE

- 7.2 Service Tag Views

- 7.2.1 MGMT$SERVICETAG_INSTANCES

- 7.2.2 MGMT$SERVICETAG_REGISTRY

8 Inventory Views

- 8.1 Inventory Views

- 8.1.1 MGMT$TARGET

- 8.1.2 MGMT$TARGET_TYPE

- 8.1.3 MGMT$TARGET_TYPE_DEF

- 8.1.4 MGMT$TARGET_ASSOCIATIONS

- 8.1.5 MGMT$TARGET_MEMBERS

- 8.1.6 MGMT$TARGET_FLAT_MEMBERS

- 8.1.7 MGMT$TARGET_TYPE_PROPERTIES

- 8.1.8 MGMT$TARGET_PROPERTIES

- 8.2 Oracle Home Directory Patching Views

- 8.2.1 MGMT$EM_HOMES_PLATFORM

- 8.2.2 MGMT$APPL_PATCH_AND_PATCHSET

- 8.2.3 MGMT$HOMES_AFFECTED

- 8.2.4 MGMT$APPLIED_PATCHES

- 8.2.5 MGMT$APPLIED_PATCHSETS

- 8.3 Oracle Home Directory Views

- 8.3.1 MGMT$OH_HOME_INFO

- 8.3.2 MGMT$OH_DEP_HOMES

- 8.3.3 MGMT$OH_CRS_NODES

- 8.3.4 MGMT$OH_CLONE_PROPERTIES

- 8.3.5 MGMT$OH_COMPONENT

- 8.3.6 MGMT$OH_COMP_INST_TYPE

- 8.3.7 MGMT$OH_COMP_DEP_RULE

- 8.3.8 MGMT$OH_PATCHSET

- 8.3.9 MGMT$OH_VERSIONED_PATCH

- 8.3.10 MGMT$OH_PATCH

- 8.3.11 MGMT$OH_PATCHED_COMPONENT

- 8.3.12 MGMT$OH_PATCH_FIXED_BUG

- 8.3.13 MGMT$OH_PATCHED_FILE

- 8.3.14 MGMT$OH_FILE

- 8.3.15 MGMT$PA_RECOM_METRIC_SOURCE

- 8.3.16 MGMT$OH_INV_SUMMARY

- 8.3.17 MGMT$OH_INSTALLED_TARGETS

9 Job Views

- 9.1 MGMT$CA_TARGETS

- 9.2 MGMT$CA_EXECUTIONS

- 9.3 MGMT$JOBS

- 9.4 MGMT$JOB_TARGETS

- 9.5 MGMT$JOB_EXECUTION_HISTORY

- 9.6 MGMT$JOB_STEP_HISTORY

- 9.7 MGMT$JOB_ANNOTATIONS

- 9.8 MGMT$JOB_NOTIFICATION_LOG

10 Linux Patching Views

- 10.1 MGMT$HOSTPATCH_HOSTS

- 10.2 MGMT$HOSTPATCH_GROUPS

- 10.3 MGMT$HOSTPATCH_GRP_COMPL_HIST

- 10.4 MGMT$HOSTPATCH_HOST_COMPL

11 Management Template Views

- 11.1 MGMT$TEMPLATES

- 11.2 MGMT$TEMPLATE_POLICY_SETTINGS

- 11.3 MGMT$TEMPLATE_METRICCOLLECTION

- 11.4 MGMT$TEMPLATE_METRIC_SETTINGS

12 Metric Views

- 12.1 MGMT$METRIC_CATEGORIES

- 12.2 MGMT$METRIC_COLLECTION

- 12.3 MGMT$METRIC_ERROR_CURRENT

- 12.4 MGMT$METRIC_ERROR_HISTORY

13 Middleware Management Views

- 13.1 Application Deployment Views

- 13.1.1 MGMT$J2EE_APPLICATION

- 13.1.2 MGMT$J2EEAPP_EJBCOMPONENT

- 13.1.3 MGMT$J2EEAPP_JRFWS

- 13.1.4 MGMT$J2EEAPP_JRFWSOPER

- 13.1.5 MGMT$J2EEAPP_JRFWSPOLICY

- 13.1.6 MGMT$J2EEAPP_JRFWSPORT

- 13.1.7 MGMT$J2EEAPP_WEBAPPCOMPONENT

- 13.1.8 MGMT$J2EEAPP_WSCONFIG

- 13.1.9 MGMT$J2EEAPP_WSPORTCONFIG

- 13.2 Glassfish Views

- 13.2.1 MGMT$EMAS_GLASSFISH_DOMAIN

- 13.2.2 MGMT$EMAS_GLASSFISH_NODES

- 13.2.3 MGMT$EMAS_GLASSFISH_SERVER

- 13.2.4 MGMT$EMAS_GLASSFISH_SVR_PROP

- 13.2.5 MMGMT$EMAS_GLASSFISH_NW_LSTNR

- 13.2.6 MGMT$EMAS_GLASSFISH_DATASOURCE

- 13.2.7 MGMT$EMAS_GLASSFISH_DS_PROP

- 13.3 Oracle WebLogic Server Views

- 13.3.1 MGMT$WEBLOGIC_APPLICATIONS

- 13.3.2 MGMT$WEBLOGIC_EJBCOMPONENT

- 13.3.3 MGMT$WEBLOGIC_FILESTORE

- 13.3.4 MGMT$WEBLOGIC_JDBCDATASOURCE

- 13.3.5 MGMT$WEBLOGIC_JDBCMULTIDS

- 13.3.6 MGMT$WEBLOGIC_JMSCONNFACTORY

- 13.3.7 MGMT$WEBLOGIC_JMSQUEUE

- 13.3.8 MGMT$WEBLOGIC_JMSSERVER

- 13.3.9 MGMT$WEBLOGIC_JMSTOPIC

- 13.3.10 MGMT$WEBLOGIC_JOLTCONNPOOL

- 13.3.11 MGMT$WEBLOGIC_JVMSYSPROPS

- 13.3.12 MGMT$WEBLOGIC_MACHINE

- 13.3.13 MGMT$WEBLOGIC_NETWORK_CHANNELS

- 13.3.14 MGMT$WEBLOGIC_NODEMANAGER

- 13.3.15 MGMT$WEBLOGIC_RACONFIG

- 13.3.16 MGMT$WEBLOGIC_RAOUTBOUNDCONFIG

- 13.3.17 MGMT$WEBLOGIC_RESOURCECONFIG

- 13.3.18 MGMT$WEBLOGIC_SERVER

- 13.3.19 MGMT$WEBLOGIC_STARTSHUTCLASSES

- 13.3.20 MGMT$WEBLOGIC_VIRTUALHOST

- 13.3.21 MGMT$WEBLOGIC_WEBAPPCOMPONENT

- 13.3.22 MGMT$WEBLOGIC_WORKMANAGER

- 13.3.23 MGMT$WEBLOGIC_WSCONFIG

- 13.3.24 MGMT$WEBLOGIC_WSPORTCONFIG

- 13.4 Oracle WebLogic Domain Views

- 13.4.1 MGMT$WEBLOGIC_DOMAIN

- 13.4.2 MGMT$WEBLOGIC_OPSSSYSPROP

- 13.4.3 MGMT$WEBLOGIC_OAMCONFIG

- 13.5 Oracle WebLogic Cluster View

- 13.5.1 MGMT$WEBLOGIC_CLUSTER

14 Monitoring Views

- 14.1 MGMT$ALERT_CURRENT

- 14.2 MGMT$TARGET_METRIC_COLLECTIONS

- 14.3 MGMT$TARGET_METRIC_SETTINGS

- 14.4 MGMT$AVAILABILITY_CURRENT

- 14.5 MGMT$AVAILABILITY_HISTORY

- 14.6 MGMT$ALERT_HISTORY

- 14.7 MGMT$AVAIL_ALERT_HISTORY

- 14.8 MGMT$METRIC_DETAILS

- 14.9 MGMT$METRIC_CURRENT

- 14.10 MGMT$METRIC_HOURLY

- 14.11 MGMT$METRIC_DAILY

15 Operating System Views

- 15.1 MGMT$OS_SUMMARY

- 15.2 MGMT$OS_COMPONENTS

- 15.3 MGMT$OS_HW_SUMMARY

- 15.4 MGMT$OS_PATCH_SUMMARY

- 15.5 MGMT$OS_FS_MOUNT

- 15.6 MGMT$OS_KERNEL_PARAMS

- 15.7 MGMT$OS_PATCHES

- 15.8 MGMT$OS_PROPERTIES

- 15.9 MGMT$OS_MODULES

- 15.10 MGMT$OS_LIMITS

- 15.11 MGMT$OS_INIT_SERVICES

16 Security Views

- 16.1 MGMT$ESA_ALL_PRIVS_REPORT

- 16.2 MGMT$ESA_ANY_DICT_REPORT

- 16.3 MGMT$ESA_ANY_PRIV_REPORT

- 16.4 MGMT$ESA_AUDIT_SYSTEM_REPORT

- 16.5 MGMT$ESA_BECOME_USER_REPORT

- 16.6 MGMT$ESA_CATALOG_REPORT

- 16.7 MGMT$ESA_CONN_PRIV_REPORT

- 16.8 MGMT$ESA_CREATE_PRIV_REPORT

- 16.9 MGMT$ESA_DBA_GROUP_REPORT

- 16.10 MGMT$ESA_DBA_ROLE_REPORT

- 16.11 MGMT$ESA_DIRECT_PRIV_REPORT

- 16.12 MGMT$ESA_EXMPT_ACCESS_REPORT

- 16.13 MGMT$ESA_KEY_OBJECTS_REPORT

- 16.14 MGMT$ESA_OH_OWNERSHIP_REPORT

- 16.15 MGMT$ESA_OH_PERMISSION_REPORT

- 16.16 MGMT$ESA_POWER_PRIV_REPORT

- 16.17 MGMT$ESA_PUB_PRIV_REPORT

- 16.18 MGMT$ESA_SYS_PUB_PKG_REPORT

- 16.19 MGMT$ESA_TABSP_OWNERS_REPORT

- 16.20 MGMT$ESA_TRC_AUD_PERM_REPORT

- 16.21 MGMT$ESA_WITH_ADMIN_REPORT

- 16.22 MGMT$ESA_WITH_GRANT_REPORT

- 16.23 MGMT$ESM_COLLECTION_LATEST

- 16.24 MGMT$ESM_FILE_SYSTEM_LATEST

- 16.25 MGMT$ESM_PORTS_LATEST

- 16.26 MGMT$ESM_SERVICE_LATEST

- 16.27 MGMT$ESM_STACK_LATEST

17 Storage Reporting Views

- 17.1 MGMT$STORAGE_REPORT_DATA

- 17.2 MGMT$STORAGE_REPORT_KEYS

- 17.3 MGMT$STORAGE_REPORT_PATHS

- 17.4 MGMT$STORAGE_REPORT_ISSUES

- 17.5 MGMT$STORAGE_REPORT_DISK

- 17.6 MGMT$STORAGE_REPORT_VOLUME

- 17.7 MGMT$STORAGE_REPORT_LOCALFS

- 17.8 MGMT$STORAGE_REPORT_NFS

18 Target Views

- 18.1 MGMT$AGENTS_MONITORING_TARGETS

- 18.2 MGMT$EM_ECM_MOS_PROPERTIES

- 18.3 MGMT$EM_ECM_TARGET_FRESHNESS

- 18.4 MGMT$MANAGEABLE_ENTITIES

19 Virtualization Views

- 19.1 MGMT$VT_VM_CONFIG

- 19.2 MGMT$VT_VM_SW_CFG

- 19.3 MGMT$VT_VM_VNIC

- 19.4 MGMT$VT_VM_VNIC_QOS

- 19.5 MGMT$VT_VM_EM_CFG

- 19.6 MGMT$VT_VM_VDISKS

- 19.7 MGMT$VT_VM_VDISK_QOS

- 19.8 MGMT$VT_EXA_CTRL_VSERVER_TAGS

- 19.9 MGMT$VT_VSP_CONFIG

- 19.10 MGMT$VT_VS_HW_CFG

- 19.11 MGMT$VT_VS_HYPERVISOR

- 19.12 MGMT$VT_VS_PROCESSORS

- 19.13 MGMT$VT_VS_SW_CFG

- 19.14 MGMT$VT_VS_ATTRIBUTES

- 19.15 MGMT$VT_VS_FS_MOUNTS

- 19.16 MGMT$VT_VS_NET_DEVICE

- 19.17 MGMT$VT_VS_FILESERVERS

- 19.18 MGMT$VT_VS_REPOS

- 19.19 MGMT$VT_VS_ABILITIES

- 19.20 MGMT$VT_ZONE_CONFIG

20 Examples

- 20.1 Blackout Views

- 20.1.1 How do I return all targets under a blackout?

- 20.1.2 How can I view a list of future scheduled blackouts?

- 20.1.3 How can I view the number of targets blacked out in the last 30 days?

- 20.2 Compliance Views

- 20.2.1 How do I view a list of all the compliance rules?

- 20.2.2 How do I view the monitoring compliance rules only?

- 20.2.3 How do I view all the repository compliance rules for a specific author?

- 20.2.4 How do I view a list of all the compliance standards?

- 20.2.5 How do I view all compliance standards owned by a specific user

- 20.2.6 How do I view a list of all the compliance standard groups?

- 20.2.7 How do I view all compliance standard groups in production?

- 20.2.8 How do I query results for compliance standards with no included standards

- 20.2.9 How do I obtain the results for compliance standards with included standards?

- 20.2.10 How do I obtain the results for compliance standard rules in a compliance standard for a target?

- 20.2.11 How do I obtain the results for compliance standard groups?

- 20.2.12 How do I obtain association information for compliance standards and targets?

- 20.2.13 How do I obtain the violation ID for an active violation of a compliance rule?

- 20.2.14 How do I obtain the violation column information?

- 20.2.15 How do I access the compliance rule violation context definition-related metadata?

- 20.2.16 How do I find all bundles that are in violation?

- 20.2.17 How do I find all observations (all states) for all bundles in violation?

- 20.2.18 How do I get a list of all the actions that occurred on all targets during a specific time range?

- 20.2.19 How do I get a list of all actions that occurred on a single target during a specific time range?

- 20.2.20 How do I get a list of all the file changes that occurred on a single target during a specific time range?

- 20.2.21 How do I get a list of all unauthorized actions that occurred during a specific time range?

- 20.2.22 How do I get a list of all occurrences of sudo?

- 20.3 Enterprise Configuration Management Views

- 20.3.1 How do I view a list of all the Enterprise Configuration Management snapshots visible to the current Enterprise Manager user, including both current and saved snapshots?

- 20.3.2 How do I get a list of all current configuration snapshots and limit the access to the snapshots based on the logged in user?

- 20.3.3 How do I view the targets involved in a comparison?

- 20.3.4 How do I view the latest comparison job results for a first target, second target combination?

- 20.3.5 How do I view all the comparison jobs that ran for a first target, second target combination?

- 20.3.6 How do I view the number of comparison differences for each configuration item in a comparison?

- 20.3.7 How do I view the comparison CCS data source information, such as CCS file name and difference status?

- 20.3.8 How do I view comparison CCS data source detail information?

- 20.3.9 How do I retrieve the comparison CCS data?

- 20.3.10 How do I get a list of all the CCS data sources or collected CCS files visible to the current Enterprise Manager user?

- 20.3.11 How do I get a list of the current CCS data sources or collected CCS files visible to current Enterprise Manager user?

- 20.3.12 How do I view the CCS-parsed data visible to the current Enterprise Manager user?

- 20.3.13 How do I view the current CCS-parsed data?

- 20.4 Hardware Views

- 20.4.1 How do I create a derived associations rule which establishes associations between a host and an Oracle VM Guest target on which it is deployed?

- 20.5 Inventory Views

- 20.5.1 How do I get the number of targets for a metric?

- 20.5.2 How do I get the number of Management Agents for a version?

- 20.5.3 How do I get the listener port for each database?

- 20.5.4 How do I get the number of databases for each category version?

- 20.5.5 How do I get the number of databases for each category version and CPU count?

- 20.5.6 How do I get the number of databases for each category version and OS platform?

- 20.5.7 How do I find the number of hosts grouped by operating system?

- 20.5.8 How do I view a list of targets used in the Oracle Enterprise Manager Cloud Control website definition?

- 20.5.9 How do I find the number of targets grouped for each type for the Cloud Control Infrastructure group?

- 20.5.10 How do I find the number of Management Agents grouped for each version?

- 20.5.11 How do I view a list of all metrics for the Management Agent on the oms.test.com system?

- 20.5.12 How do I view a list of all clustered targets in the repository?

- 20.5.13 How do I view a list of all the installed Management Agent bundle patches?

- 20.5.14 How do I view a list of all the Management Agents that do not have Oracle 12c Release 4 Bundle Patch 9 installed?

- 20.5.15 How do I view the details of every Management Agent installation?

- 20.6 Jobs Views

- 20.6.1 How can I view a list of all running repeating jobs?

- 20.6.2 How do I view the number of notifications sent for failed jobs for each job owner?

- 20.6.3 How do I view a list of all jobs that have the Management Repository itself as a target?

- 20.7 Management Template Views

- 20.7.1 How do I view a list of all public templates?

- 20.8 Metric Views

- 20.8.1 How do I return the current thresholds for the alertlog metric?

- 20.8.2 How do I view a list of all metric errors for metrics on Management Agents?

- 20.8.3 How do I find the number of UDM metric errors on host targets in the last 30 days?

- 20.9 Monitoring Views

- 20.9.1 How do I get database metrics with outstanding severities?

- 20.9.2 How do I get a list of all disabled metrics on Management Agents?

- 20.9.3 How do I get the number of down targets?

- 20.9.4 How do I get the availability information for the Enterprise Manager website?

- 20.9.5 How do I get the number of alertlog severities for the database in the last 24 hours?

- 20.9.6 How do I get the current CPU utilization of a host?

- 20.9.7 How do I get a list of all the collected user-defined metrics (UDMs)?

- 20.9.8 How do I get the first byte response for the Enterprise Manager website at a specific time?

- 20.9.9 How do I obtain the average number of connections for a listener for a specific period?

- 20.9.10 How do I find the reasons for host outages lasting longer than one day?

- 20.9.11 How do I generate a list of all targets currently blacked out?

- 20.9.12 How do I view a list of availability state changes made to targets in the repository in the last 30 days?

- 20.9.13 How do I find all hosts with more than 90 percent CPU utilization?

- 20.9.14 How do I find the minimum and maximum number of sessions for all OMS applications in the last 30 days?

- 20.9.15 How do I find the loader throughput of the OMS on the last day?

- 20.9.16 How do I find the minimum and maximum number from the last full day for the performance of Oracle Enterprise Manager Cloud Control?

- 20.9.17 How do I view a list of all targets with the Response metric disabled?

- 20.9.18 How do I view a list of all database or RAC targets that have the tablespace thresholds set to less than 85 for warning and 95 for critical?

- 20.10 Operating System Views

- 20.10.1 How do I retrieve information from MGMT$OS_SUMMARY for a specific host from the Management Repository?

Index

Preface

This document provides descriptions of the Management Repository views and related examples.

Note:
For the most current version of this document, go to the Extensibility page of the Oracle Enterprise Manager Online Documentation set:

http://www.oracle.com/pls/em121/homepage

Audience

This document is intended for plug-in developers that want to extend Oracle Enterprise Manager to support the ability to manage custom target types or extend the manageability of out-of-box target types.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Related Documents

For more information about Oracle Enterprise Manager and defining metrics, see the following documents:

- Enterprise Manager Cloud Control Administrator's Guide

- Enterprise Manager Cloud Control Extensibility Programmer's Reference

- Enterprise Manager Oracle Database Plug-in Metric Reference Manual

- Enterprise Manager Middleware Plug-in Metric Reference Manual

- Enterprise Manager Framework, Host, and Services Metric Reference Manual

To browse all the Enterprise Manager documentation, see the following website:

http://www.oracle.com/pls/em121/homepage

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

What's Changed in this Guide?

In addition to updating books for an incremental software release or a patch set release, Oracle revises its books regularly to incorporate bug fixes and value-added feedback from customers, product managers, support teams, and other key stakeholders. Every time a book is revised, the revision number of the book is increased by one and then published.

This chapter lists the changes incorporated in the latest revision (E57277-03) of this book.

Since the last revision, the following change has been made:

- Added: Added MGMT$EM_ECM_HOST_VIRTUAL and MGMT$HW_HOSTS_FILE views to Chapter 7, "Hardware Views".

1 Introducing Management Repository Views

This chapter provides an introduction to Management Repository views. It contains the following sections:

- About Management Repository Views

- Using Management Repository Views

For examples of how to use views, see Chapter 20, "Examples".

1.1 About Management Repository Views

The Enterprise Manager Management Repository views provide access to target, metric, and monitoring information stored in the Management Repository. Accessing the Management Repository allows you to perform the following:

- Obtain relevant application-specific information at the right level of granularity and density for a wider variety of users, such as IT staff, executives, and developers.

- Send alerts for metric threshold violations.

- Perform historical analysis or additional computation on stored data.

- Integrate Enterprise Manager alerts seamlessly with user ticketing systems, such as iSupport and Remedy.

While the information in these views is used mainly by the Cloud Control console, it can be used in other ways, such as by programmers building extensibility on top of Enterprise Manager. For example, as a plug-in developer, you might want to extend Enterprise Manager to manage your own, custom-developed targets, or expand on the target types that Oracle provides out-of-the-box. You might want to write your own scripts to query historical data from these views, or build your own custom reports to run from SQL Developer or other products. For more information about extending Enterprise Manager, see the Enterprise Manager Cloud Control Extensibility Programmer's Guide and the Enterprise Manager Cloud Control Extensibility Programmer's Reference.

To facilitate easy access to information stored in the Management Repository, Enterprise Manager supplies a comprehensive set of views rather than forcing the user to access repository base tables directly. Views buffer custom applications from any underlying changes to the repository schema and ensures up-stream applications will not break when the repository schema changes due to patching or new releases.

1.2 Using Management Repository Views

Note:
You must use the views that are documented in this guide and in the Extensibility Development Kit (EDK) only. Any other view that is not documented must not be used and backward compatibility for undocumented views and tables is not guaranteed.

Because the views are simple queries to a database, users can imbed these queries within any application code used to return information for further processing and display in the Enterprise Manager Cloud Control console.

As shown in Example 1-1, the Java code uses Enterprise Manager views to query the Management Repository rather than accessing the repository tables directly. For each of the four time windows, there are four SQL statements with questions marks ('?') as placeholders for the parameters.

See Also:
Chapter 20, "Examples" provides examples of how to use the Management Repository views.

Example 1-1 View Usage

public static final String hour_stmt =

"SELECT collection_timestamp, value "+
"FROM mgmt$metric_details " +
"WHERE target_type = ? and target_name = ? and metric_name = ? and metric_column= ? " +
"and collection_timestamp > sysdate - 1/24 " +
"ORDER BY collection_timestamp ";

public static final String day_stmt =

"SELECT rollup_timestamp, average "+
"FROM mgmt$metric_hourly " +
"WHERE target_type = ? and target_name = ? and metric_name = ? and metric_column= ? " +

"and rollup_timestamp > sysdate - 1 " +
"ORDER BY rollup_timestamp";

public static final String week_stmt =

"SELECT rollup_timestamp, average "+
"FROM mgmt$metric_daily " +
"WHERE target_type = ? and target_name = ? and metric_name = ? and metric_column= ? " +
"and rollup_timestamp > sysdate - 7 " +
"ORDER BY rollup_timestamp";

public static final String month_stmt =

"SELECT rollup_timestamp, average "+
"FROM mgmt$metric_daily " +
"WHERE target_type = ? and target_name = ? and metric_name = ? and metric_column= ? " +
"and rollup_timestamp > sysdate - 31 " +
"ORDER BY rollup_timestamp";

2 Blackout Views

This chapter provides a description of each blackout view and its columns. Blackouts permit you to suspend monitoring on one or more targets in order to perform maintenance operations. It contains the following sections:

- MGMT$BLACKOUT_HISTORY

- MGMT$BLACKOUTS

For examples of how to use views, see Chapter 20, "Examples".

2.1 MGMT$BLACKOUT_HISTORY

The MGMT$BLACKOUT_HISTORY view displays a historical log of changes in the blackout state for a managed target. In addition, the view can be used to generate a list of targets that were in a blackout period for a specific period of time.

Table 2-1 MGMT$BLACKOUT_HISTORY

Column

Description

BLACKOUT_NAME

The name of the blackout

CREATED_BY

The Enterprise Manager administrator who created the blackout

BLACKOUT_GUID

The unique global identifier (GUID) for the blackout

START_TIME

Start of the blackout period for the managed target

END_TIME

End of the blackout period for the managed target. If the target is currently in a blackout period, the END_ TIMESTAMP date will be NULL.

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

Types of targets may include databases, hosts, web servers, applications, or Application Servers. The definer of the collection definition at the Management Agent defines the target type. The target type defines the set of metrics that are collected for a managed target within the Management Repository.

STATUS

Current status of the blackout

Status Values:

- 0: Scheduled

- 1: Start Processing

- 2: Start Partial

- 4: Started

- 5: Stop Pending

- 6: Stop Failed

- 7: Stop Partial

- 8: Edit Failed

- 9: Edit Partial

- 10: Stopped

- 11: Ended

- 12: Partial Blackout

- 13: Modify Pending

Usage Notes

Queries using this view will use an index if they reference the target_name, target_ type, start_timestamp, or end_timestamp.

Typically, blackout history information retrieved using this view will be ordered by target_name, target_type, and start_timestamp.

2.2 MGMT$BLACKOUTS

The MGMT$BLACKOUTS view displays all blackout definition information along with current schedules.

Table 2-2 MGMT$BLACKOUTS

Column

Description

BLACKOUT_NAME

The name of the blackout

BLACKOUT_GUID

The unique global identifier (GUID) of the blackout

REASON

Purpose of the blackout. Reasons are chosen from a predefined list by the report owner

DESCRIPTION

Detailed information about the blackout

STATUS

Current status of the blackout

Status Values:

- 0: Scheduled

- 1: Start Processing

- 2: Start Partial

- 4: Started

- 5: Stop Pending

- 6: Stop Failed

- 7: Stop Partial

- 8: Edit Failed

- 9: Edit Partial

- 10: Stopped

- 11: Ended

- 12: Partial Blackout

- 13: Modify Pending

CREATED_BY

Administrator who created the blackout. CREATED_BY returns SYSTEM as the blackout owner if the blackout was created using the Enterprise Manager Command Line Interface.

LAST_START_TIME

Last time the blackout successfully started

LAST_END_TIME

Last time the blackout successfully ended

SCHEDULED_TIME

Possible values are:

- 0 - Immediate schedule

- 1 - Run once at specified time

- 2 - Run on interval

- 3 - Run daily

- 4 - Run on specified days of the week

- 5 - Run on specified days of the month

- 6 - Run on specified days of the year

SCHEDULE_START_TIME

Time the blackout is scheduled to start.

SCHEDULE_END_TIME

Time the blackout is scheduled to end

DURATION

Duration of the blackout in minutes

3 Chargeback Views

This chapter provides a description of each chargeback view and its columns. It contains the following sections:

- MGMT$EMCT_CBA_CHARGE_HOURLY

- MGMT$EMCT_CBA_CHARGE_DAILY

For examples of how to use views, see Chapter 20, "Examples".

3.1 MGMT$EMCT_CBA_CHARGE_HOURLY

This view provides hour aggregated metering and charge data. The configuration metrics and fixed charge metrics are at day aggregation level.

Table 3-1 MGMT$EMCT_CBA_CHARGE_HOURLY

Column

Description

CONSUMER_NAME

Represents the internal cost center name to which the currently being charged target was assigned.

CONSUMER_DISPLAY_NAME

Represents the display name of cost center to which the currently being charged target was assigned.

COLLECTION_DATE

Represents the UTC date at which the charge item value was collected.

YEAR

Represents the year to which the collection date belongs.

MONTH_OF_YEAR

Represents the month of the year to which the collection date belongs.

DAY_OF_MONTH

Represents the day of the month to which the collection date belongs.

WEEK_OF_YEAR

Represents the week of the year to which the collection date belongs.

QUARTER_OF_YEAR

Represents the quarter of the year to which the current collection date belongs.

DAY_DATE

Represents the day date to which the current collection date belongs.

HOUR_OF_DAY

Represents the hour within the day to which the current collection date belongs.

TYPE_NAME

Represents the target type display name of the target that is being charged.

TARGET_NAME

Represents the internal name of the target that is being charged.

TARGET_DISPLAY_NAME

Represents display name of the target that is being charged.

HOST_NAME

Represents the host on which the currently being charged target is deployed.

ITEM

Represents the display name of the charge item for the charge being computed.

UNIT

Represents display name of the charge item unit for the charge being computed

CATEGORY

Represents the charge item category for the charge being computed. Posibble values are

- Instance

- Service

- CPU

- Memory

- Disk/Storage

- Network

- Software

- Activity

- Instance Uptime

- Unclassified

USAGE_VALUE

Represents the usage value of the charge item. This column has a value if the charge item is a "number" data type. If the charge item aggregation type is "sum", then it will represent the sum value of the item within that hour. If the charge item aggregation type is "avg" then it represents the average value within that hour.

STRING_VALUE

Represents the string value of the charge item. This column has a value if the charge item has a "string" data type.

CHARGE_PLAN

Represents the name of the charge plan used to calculate the charge.

CHARGE_PLAN_CONFIG

Represents plan configuration within the charge plan used to calculate the charge.

RATE_TYPE

Represents the rate type of the charge item:

- Config
The charge item that is being charged was charged based on configuration.

- Usage
The charge item that is being charged was charged based on usage.

- Flat
The charge item that is being charged based on flat rate

RATE

Represents the charge rate expression defined in the charge plan configuration for the charge item that is being charged. If the charge item that is being charged is of universal item type, then this column represents the factor value with universal item defined rate.

CHARGE

Represents the computed charge value of the charge item that is being charged.

CHARGE_ADJUSTMENT

Represents the applicable charge adjustment value for the charge item that is being charged.

ADJUSTED_CHARGE

Represents the final charge value of the charge item that is being charged, after charge adjustments are taken into consideration.

UPTIME

Represents uptime (Hours) in the day of the target that is being charged. For "metric" items this value is null.

3.2 MGMT$EMCT_CBA_CHARGE_DAILY

This view provides day aggregated charge data

Table 3-2 MGMT$EMCT_CBA_CHARGE_DAILY

Column

Description

CONSUMER_NAME

Represents the internal cost center name to which the currently being charged target was assigned.

CONSUMER_DISPLAY_NAME

Represents the display name of cost center to which the currently being charged target was assigned.

COLLECTION_DATE

Represents the UTC date at which the charge item value was collected.

YEAR

Represents the year to which the collection date belongs.

MONTH_OF_YEAR

Represents the month of year to which the collection date belongs.

DAY_OF_MONTH

Represents the day of month to which the collection date belongs.

WEEK_OF_YEAR

Represents the week of year to which the collection date belongs.

QUARTER_OF_YEAR

Represents the quarter of year to which the current collection date belongs.

DAY_DATE

Represents the day date to which the current collection date belongs.

TYPE_NAME

Represents the target type display name of the target that is being charged.

TARGET_NAME

Represents the internal name of the target that is being charged.

TARGET_DISPLAY_NAME

Represents display name of the target that is being charged.

HOST_NAME

Represents the host on which the currently being charged target is deployed.

ITEM

Represents the display name of the charge item for the charge being computed in the charge computing target.

UNIT

Represents the display name of the charge item unit for the charge being computed.

CATEGORY

Represents the charge item category for the charge being computed. Posibble values are

- Instance

- Service

- CPU

- Memory

- Disk/Storage

- Network

- Software

- Activity

- Instance Uptime

- Unclassified

USAGE_VALUE

Represents the usage value of the charge item. This column has a value if the charge item has a "number" data type. If the charge item aggregation type is "sum", then it will represent the sum value of the item within that day. If the charge item aggregation type is "avg" then it represents average value within that day.

STRING_VALUE

Represents the string value of the charge item. This column has a value if the charge item has a "string" data type.

CHARGE_PLAN

Represents the name of the charge plan used to calculate the charge.

CHARGE_PLAN_CONFIG

Represents the plan configuration within the charge plan used to calculate the charge.

RATE_TYPE

Represents the rate type of the charge item

- Config
The charge item that is being charged was charged based on the "Per Unit" basis.

- Usage
The charge item that is being charged was charged based on usage.

- Flat
The charge item that is being charged was based on a flat rate.

RATE

Represents charge rate expression defined in the charge plan configuration for the charge item that is being charged. If the charge item that is being charged is of universal item type, then this column represents the factor value with universal item defined rate.

CHARGE

Represents the computed charge value of the charge item that is being charged.

CHARGE_ADJUSTMENT

Represents the applicable charge adjustment value for the charge item that is being charged.

ADJUSTED_CHARGE

Represents final charge value of the charge item that is being charged, after charge adjustments are taken into consideration.

UPTIME

Represents uptime (Hours) in the day of the target that is being charged. For "metric" items this value is null

4 Compliance Views

This chapter provides a description of each compliance view and its columns. Compliance is the conformance to standards, or requirements, or both. Enterprise Manager Compliance Management provides the ability to evaluate the compliance of targets and systems as they relate to business best practices for configuration, security, and storage. This is accomplished by defining, customizing, and managing compliance frameworks, compliance standards, and compliance standard rules. In addition, it provides advice of how to change configuration to bring your targets and systems into compliance.

This chapter contains the following sections:

- MGMT$COMPLIANCE_STANDARD_RULE

- MGMT$COMPLIANCE_STANDARD

- MGMT$COMPLIANCE_STANDARD_GROUP

- MGMT$CS_EVAL_SUMMARY

- MGMT$COMPOSITE_CS_EVAL_SUMMARY

- MGMT$CS_RULE_EVAL_SUMMARY

- MGMT$CS_GROUP_EVAL_SUMMARY

- MGMT$CS_TARGET_ASSOC

- MGMT$CSR_CURRENT_VIOLATION

- MGMT$CSR_VIOLATION_CONTEXT

- MGMT$EM_RULE_VIOL_CTXT_DEF

- MGMT$RULE_KEYWORD

- MGMT$CS_KEYWORD

- MGMT$CS_GROUP_KEYWORD

- MGMT$CS_RULE_ATTRS

- MGMT$CS_HIERARCHY

- MGMT$CS_RQS_HIERARCHY

- MGMT$CS_RULEFOLDER

- MGMT$CSG_HIERARCHY

- MGMT$CSG_SUBGROUP

- MGMT$CSR_TARGET_ASSOC

- MGMT$CSRF_TARGET_ASSOC

- MGMT$REPO_RULE_CHK_DETAILS

- MGMT$REPOSITORY_RULE_BIND_VARS

- MGMT$REPOSITORY_RULE_PARAMS

- MGMT$CS_TGT_ASSOC_TXF_REQ

- MGMT$EM_CS_RULE_EVENT_ERROR

- MGMT$CCC_ALL_OBS_BUNDLES

- MGMT$CCC_ALL_OBSERVATIONS

- MGMT$CCC_ALL_VIOLATIONS

- MGMT$COMPLIANT_TARGETS

- MGMT$COMPLIANCE_SUMMARY

- MGMT$COMPLIANCE_TREND

For examples of how to use views, see Chapter 20, "Examples".

4.1 MGMT$COMPLIANCE_STANDARD_RULE

The MGMT$COMPLIANCE_STANDARD_RULE view contains the lists of all the compliance standard rules. A compliance standard rule is a test to determine if a configuration data change affects compliance. A compliance standard rule is mapped to one or more compliance standards.

Table 4-1 MGMT$COMPLIANCE_STANDARD_RULE

Column

Description

RULE_NAME

Display name in English

DESCRIPTION

Description of the rule in English

TARGET_TYPE

Applicable target type of rule

REFERENCE_URL

Not used in this release

RATIONALE

Explains the importance of this rule, and the consequences of noncompliance

FIXTEXT

Explains the steps to bring the target into compliance with respect to this rule

WARNING

Cautionary or caveat note about this rule

RULE_TYPE

Type of rule.

Possible values:

- Repository

- Agent

- Monitoring

MESSAGE

Message recorded for new violation

CLEAR_MESSAGE

Message recorded for clear violation

SEVERITY

The severity of the rule

Possible values:

- Minor Warning

- Warning

- Critical

LIFECYCLE_STATE

Lifecycle status of the rule

Possible values:

- Development

- Production

- Draft

AUTHOR

Author of the rule

OWNER

Owner of the rule

IS_SYSTEM

Specifies whether the rule is system defined

Possible values

- False

- True

RULE_DNAME_NLSID

NLSID of the rule display name for non-English users

DESCRIPTION_NLSID

NLSID of the rule description for non-English users

RATIONALE_NLSID

NLSID of the rule impact for non-English users

FIXTEXT_NLSID

NLSID of the rule recommendation for non-English users

WARNING_NLSID

NLSID of the rule warning for non-English users

RULE_TYPE_CODE

Code to represent the type of compliance standard rule.

Possible values:

- 1: Repository

- 2: Agent

- 3: Monitoring

SEVERITY_CODE

Code to represent the severity of the compliance standard rule.

Possible values:

- 18: Minor Warning

- 20: Warning

- 25: Critical

LIFECYCLE_STATE_CODE

Code to represent the status of the lifecycle of the compliance standard rule.

Possible values:

- 1: Development

- 2: Production

- 3: Draft

IS_SYSTEM_CODE

Code to represent whether the compliance standard rule is system defined.

Possible values:

- 0: False

- 1: True

4.2 MGMT$COMPLIANCE_STANDARD

The MGMT$COMPLIANCE_STANDARD view contains the lists of all compliance standards. A compliance standard is a collection of checks or rules. It is the Enterprise Manager representation of a compliance control that must be tested against some set of IT infrastructure to determine if the control is being followed.

Table 4-2 MGMT$COMPLIANCE_STANDARD

Column

Description

CS_NAME

Display name in English

TARGET_TYPE

Applicable target type of the compliance standard

AUTHOR

Author of the compliance standard

OWNER

Owner of the compliance standard

VERSION

Version of the compliance standard

KEYWORDS

Keywords associated with the compliance standard

LIFECYCLE_STATUS

Lifecycle status of the compliance standard

Possible values:

- Development

- Production

AUTO_ENABLE

Specifies whether the compliance standard should be associated with applicable target automatically

Possible values:

- False

- True

DESCRIPTION

Description of the compliance standard in English

REFERENCE_URL

Not used in this release

FRONT_MATTER

Introductory text of the compliance standard

REAR_MATTER

Concluding text of the compliance standard

NOTICE

Legal notice or copyright text about compliance standard

IS_SYSTEM

Specifies whether the compliance standard is system defined

Possible values:

- False

- True

CS_DNAME_NLSID

NLSID of the standard display name for non-English users

LIFECYCLE_STATE_CODE

Code representing the status of the compliance standard lifecycle.

Possible values:

- 1: Development

- 2: Production

AUTO_ENABLE_CODE

Code representing whether the compliance standard should be automatically associated with an applicable target.

Possible values:

- 0: False

- 1: True

DESCRIPTION_NLSID

NLSID of the compliance standard description for non-English users

NOTICE_NLSID

NLSID of the legal notice or copyright text about the compliance standard for non-English users

IS_SYSTEM_CODE

Code representing whether the compliance standard is system defined.

Possible values:

- 0: False

- 1: True

CS_TYPE

Type of compliance standard

CS_TYPE_CODE

Code representing the type of compliance standard.

Possible values:

- 1: Repository

- 2: WebLogic server signature

- 3: Real-time monitoring

4.3 MGMT$COMPLIANCE_STANDARD_GROUP

The MGMT$COMPLIANCE_STANDARD_GROUP view contains the lists of the compliance standard groups.

Table 4-3 MGMT$COMPLIANCE_STANDARD_GROUP

Column

Description

CSG_NAME

The display name in English

AUTHOR

Author of the compliance standard group

OWNER

Owner of the compliance standard group

VERSION

The version of the compliance standard group

LIFECYCLE_STATUS

Lifecycle status of the compliance standard group

Possible values:

- Development

- Production

DESCRIPTION

Description of the compliance standard group in English

REFERENCE_URL

Not used in this release

FRONT_MATTER

Introductory text of the compliance standard group

REAR_MATTER

Concluding text of the compliance standard group

NOTICE

Legal notice or copyright text about the compliance standard group

IS_SYSTEM

Specifies whether the compliance standard group is system defined

Possible values:

- False

- True

CSG_DNAME_NLSID

NLSID of the compliance standard group display name for non-English users

LIFECYCLE_STATE_CODE

Code representing the status of the compliance standard group lifecycle.

Possible values:

- 1: Development

- 2: Production

DESCRIPTION_NLSID

NLSID of the compliance standard group description for non-English users

NOTICE_NLSID

NLSID of the legal notice or copyright text about the compliance standard group for non-English users

IS_SYSTEM_CODE

Coderepresenting whether the compliance standard group is system defined.

Possible values:

- 0: False

- 1: True

4.4 MGMT$CS_EVAL_SUMMARY

The MGMT$CS_EVAL_SUMMARY view contains the lists of all the root compliance standard scores.

Table 4-4 MGMT$CS_EVAL_SUMMARY

Column

Description

CS_GUID

Unique identifier of compliance standard

Note: You can obtain this value from the MGMT$COMPLIANCE_STANDARD view.

TARGET_GUID

Unique identifier of target

CS_NAME

Internal name of the compliance standard

CS_INAME

English display nameof the compliance standard

CS_AUTHOR

Author of the compliance standard

CS_VERSION

Version of the compliance standard

TARGET_NAME

Target name

TARGET_TYPE

Target type

COMPLIANT_RULES

Number of compliant rules in the compliance standard hierarchy for that target

CRITICAL_RULES

Number of critical rules in the compliance standard hierarchy for that target

WARN_RULES

Number of warning rules in the compliance standard hierarchy for that target

MWARN_RULES

Number of minor warning rules in the compliance standard hierarchy for that target

NON_COMPLIANT_RULES

Number of noncompliant rules in the compliance standard hierarchy for that target

ERROR_RULES

Number of error rules in the compliance standard hierarchy for that target

UNKNOWN_RULES

Number of unknown rules in the compliance standard hierarchy for that target

CRIT_VIOLATIONS

Total critical violations raised by compliance standard

WARN_VIOLATIONS

Total warning violations raised by compliance standard

MWARN_VIOLATIONS

Total minor warning violations raised by compliance standard

TOTAL_VIOLATIONS

Total violations raised by compliance standard

COMPLIANCE_SCORE_LEVEL

Specifies the compliance score level

Possible values:

- Compliant

- Critical

- Warning

LAST_EVALUATION_DATE

Last score evaluation date

COMPLIANCE_SCORE

Compliance score of standard

IS_SCORE_VALID

Specifies whether the compliance score is valid.

CS_TYPE

The type of compliance standard

Possible values:

- Repository

- WebLogic Server Signature

- Real-time Monitoring

CS_DNAME_NLSID

NLSID of the standard display name for non-English users

COMPLIANCE_SCORE_LEVEL_CODE

Represents compliance score level

Possible values:

- 0: Compliant

- 1: Critical

- 2: Warning

IS_SCORE_VALID_CODE

Represents whether the compliance score is valid

Possible values:

- 0: False

- 1: True

CS_TYPE_CODE

Represents the type of compliance standard

Possible values:

- 1: Repository

- 2: WebLogic Server Signature

- 3: Real-time monitoring

4.5 MGMT$COMPOSITE_CS_EVAL_SUMMARY

The MGMT$COMPOSITE_CS_EVAL_SUMMARY view contains the list of all the compliance standard scores. Each row in the MGMT$COMPOSITE_CS_EVAL_SUMMARY view represents the results for a top level compliance standard or top level target, and an included compliance standard or member target.

When you include a compliance standard within another top level compliance standard, the included standard must be of the same target type as the top level compliance standard. If the top level compliance standard is a composite target type, then the included standard can be one of the member target types of the composite target type.

Note:
A root compliance standard is associated to a root target (of composite target type). Compliance standards are associated to member targets of the same applicable target type and target filter criteria.

Table 4-5 MGMT$COMPOSITE_CS_EVAL_SUMMARY

Column

Description

ROOT_CS_GUID

Unique identifier of the root compliance standard

Note: You can obtain this from the MGMT$COMPLIANCE_STANDARD view.

RQS_GUID

Unique identifier of compliance standard within root compliance standard context

CS_GUID

Unique identifier of compliance standard

Note: You can obtain this from the MGMT$COMPLIANCE_STANDARD view.

ROOT_TARGET_GUID

Unique identifier of root target

TARGET_GUID

Unique identifier of target

ROOT_CS_NAME

Internal name of root compliance standard

ROOT_CS_INAME

English display name of root compliance standard

ROOT_CS_AUTHOR

Author of root compliance standard

ROOT_CS_VERSION

Version of root compliance standard

CS_NAME

Internal name of compliance standard

CS_INAME

Display name in English

CS_AUTHOR

Author of standard

CS_VERSION

Version of standard

ROOT_TARGET_NAME

Root target name

ROOT_TARGET_TYPE

Root target type

TARGET_NAME

Target name

TARGET_TYPE

Target type

COMPLIANT_RULES

Number of compliant rules in the compliance standard hierarchy for that target or member target

CRITICAL_RULES

Number of critical rules in the compliance standard hierarchy for that target or member target

WARN_RULES

Number of warning rules in the compliance standard hierarchy for that target or member target

MWARN_RULES

Number of minor warning rules in the compliance standard hierarchy for that target or member target

NON_COMPLIANT_RULES

Number of noncompliant rules in the compliance standard hierarchy for that target or member target

ERROR_RULES

Number of error rules in the compliance standard hierarchy for that target or member target

UNKNOWN_RULES

Number of unknown rules in the compliance standard hierarchy for that target or member target

CRIT_VIOLATIONS

Total critical violations raised by compliance standard

WARN_VIOLATIONS

Total warning violations raised by compliance standard

MWARN_VIOLATIONS

Total minor warning violations raised by compliance standard

TOTAL_VIOLATIONS

Total violations raised by compliance standard

SUPPRESSED_CRIT

Number of suppressed critical violations

SUPPRESSED_WARN

Number of suppressed warning violations

SUPPRESSED_MWARN

Number of suppressed minor warning violations

COMPLIANCE_SCORE_LEVEL

Compliance score level

Possible values:

- Compliant

- Critical

- Warning

LAST_EVALUATION_DATE

Last evaluation date

COMPLIANCE_SCORE

Compliance score of standard

ROOT_CS_NAME_NLSID

NLSID of the name of the root compliance standard for non-English users

CS_NAME_NLSID

NLSID of the name of the compliance standard for non-English users

COMPLIANCE_SCORE_LEVEL_CODE

Code representing the compliance score level.

Possible values:

- 0: Compliant

- 1: Critical

- 2: Warning

IS_SCORE_VALID_CODE

Code representing whether the compliance score is valid.

Possible values:

- 0: False

- 1: True

4.6 MGMT$CS_RULE_EVAL_SUMMARY

The MGMT$CS_RULE_EVAL_SUMMARY view contains the lists of all the compliance rule scores for the target.

Table 4-6 MGMT$CS_RULE_EVAL_SUMMARY

Column

Description

ROOT_CS_GUID

Unique identifier of the root compliance standard

Note: You can obtain this from the MGMT$COMPLIANCE_STANDARD view.

RQS_GUID

Unique identifier of the rule within root compliance standard context

RULE_GUID

Unique identifier of the compliance rule

Note: You can obtain this from the MGMT$COMPLIANCE_STANDARD_RULE view.

ROOT_TARGET_GUID

Unique identifier of the root target

TARGET_GUID

Unique identifier of the target

ROOT_CS_NAME

Internal name of the root compliance standard

ROOT_CS_INAME

Display name of the root compliance standard in English

ROOT_CS_AUTHOR

Author of the root compliance standard

ROOT_CS_VERSION

Version of the root compliance standard

PARENT_CS_NAME

Internal name of the parent compliance standard

PARENT_CS_INAME

Display name of the parent compliance standard in English

PARENT_CS_AUTHOR

Author of the standard of parent compliance standard

PARENT_CS_VERSION

Version of the parent compliance standard

RULE_NAME

Display name of the rule in English

RULE_INAME

Internal name of the rule

ROOT_TARGET_NAME

Root target name

ROOT_TARGET_TYPE

Root target type

TARGET_NAME

Target name

TARGET_TYPE

Target type

TOTAL_VIOLATIONS

Total violations raised by the compliance rule within the compliance standard context

LAST_EVALUATION_DATE

Last evaluation date

COMPLIANCE_SCORE

Compliance score of the rule with respect to compliance standard context

IS_SCORE_VALID

Specifies whether the compliance score is valid

ROOT_CS_NAME_NLSID

NLSID of the name of the root compliance standard for non-English users

PARENT_CS_NAME_NLSID

NLSID of the name of the parent compliance standard for non-English users

IS_SCORE_VALID_CODE

Code representing whether the compliance score is valid.

Possible values:

- 0: False

- 1: True

4.7 MGMT$CS_GROUP_EVAL_SUMMARY

The MGMT$CS_GROUP_EVAL_SUMMARY view contains the lists of all the compliance standard group scores.

Table 4-7 MGMT$CS_GROUP_EVAL_SUMMARY

Column

Description

CSG_GUID

Unique identifier of compliance standard group

Note: You can obtain this from the MGMT$COMPLIANCE_STANDARD_GROUP view.

CSG_NAME

Internal name of compliance standard group

CSG_INAME

Display name in English

CSG_VERSION

Version of compliance standard group

CRITICAL_EVALUATIONS

Number of critical evaluations

WARNING_EVALUATIONS

Number of warning evaluations

COMPLIANT_EVALUATIONS

Number of compliant evaluations

CRITICAL_VIOLATIONS

Total critical violations

WARN_VIOLATIONS

Total warning violations

MWARN_VIOLATIONS

Total minor warning violations

COMPLIANCE_SCORE

Compliance score of compliance standard group

4.8 MGMT$CS_TARGET_ASSOC

The MGMT$CS_TARGET_ASSOC view contains the lists all the root compliance standard and target associations.

Table 4-8 MGMT$CS_TARGET_ASSOC

Column

Description

CS_GUID

Unique identifier of compliance standard

Note: You can obtain this from the MGMT$COMPLIANCE_STANDARD view.

TARGET_GUID

Unique identifier of target

CS_NAME

Internal name of compliance standard

CS_INAME

Display name in English

CS_AUTHOR

Author of the standard

CS_VERSION

Version of the standard

TARGET_NAME

Target name

TARGET_TYPE

Target type

CRIT_THRESHOLD

Critical threshold value

WARN_THRESHOLD

Warning threshold value

STATUS

Status of the association

Possible values:

- Enabled

- Disabled

CS_DNAME_NLSID

NLSID of the standard display name for non-English users

STATUS_CODE

Code representing the status of the association.

Possible values:

- 1: Enabled

- 2: Disabled

- 3: Pending Enable

- 4: Pending Disable

4.9 MGMT$CSR_CURRENT_VIOLATION

The MGMT$CSR_CURRENT_VIOLATION view contains the active violations of all compliance rules.

Table 4-9 MGMT$CSR_CURRENT_VIOLATION

Column

Description

ROOT_CS_GUID

Unique GUID of the root compliance standard

RQS_GUID

Unique GUID of rule inclusion within the root compliance standard

RULE_GUID

Unique GUID of the rule

ROOT_TARGET_GUID

Unique GUID of the root target

TARGET_GUID

Unique GUID of the target

POLICY_GUID

Unique GUID of the policy (repository rule)

KEY_VALUE

The key value of the violation

COLLECTION_TIMESTAMP

The timestamp when the violation occurred

VIOLATION_GUID

Unique GUID identifying the violation

VIOLATION_LEVEL

Specifies the priority level of the violation

Possible values:

- 18: Minor warning

- 20: Warning

- 25: Critical

RULE_TYPE

Specifies the type of compliance rule being violated

Possible values:

- 1: Repository rule

- 2: Guardian rule

- 3: Compliance real-time rule

ANNOTATED_FLAG

Not used in this release

MESSAGE

Violation message of the rule

MESSAGE_NLSID

NLSID of the violation message of the rule

MESSAGE_PARAMS

Violation message parameters

ACTION_MESSAGE_NLSID

Not used in this release

ACTION_MESSAGE_PARAMS

Not used in this release

4.10 MGMT$CSR_VIOLATION_CONTEXT

The MGMT$CSR_VIOLATION_CONTEXT view contains the violation context, that is extra columns defined in the rule to be collected for a violation

Table 4-10 MGMT$CSR_VIOLATION_CONTEXT

Column

Description

VIOLATION_GUID

Unique GUID identifying the violation

COLLECTION_TIMESTAMP

Timestamp at which the violation occurred

COLUMN_NAME

The name of the column of the violation context

COLUMN_TYPE

Type of the column name

Possible values:

- 1: Numeric

- 2: String

COLUMN_VALUE

Specifies the numeric value of the column

Note: Applies only when COLUMN_TYPE is set to 1

COLUMN_STR_VALUE

Specifies the string value of the column

Note: Applies only when COLUMN_TYPE is set to 2

4.11 MGMT$EM_RULE_VIOL_CTXT_DEF

The MGMT$EM_RULE_VIOL_CTXT_DEF view stores the violation context definition of compliance standard rules. Each row stores one violation column definition of a compliance standard rule.

Table 4-11 MGMT$EM_RULE_VIOL_CTXT_DEF

Column

Description

RULE_GUID

Unique GUID of the compliance standard rule

COLUMN_INAME

Internal name of the column

COLUMN_DNAME

Display name of the column

COLUMN_DNAME_NLSID

The NLSID of the display name of the column

COLUMN_TYPE

Data type of the column.

Possible values:

- 1: Number

- 2: String

COLUMN_POSITION

Position of the column within the violation context definition

IS_KEY

Specifies whether the column is a key column (1=key column)

IS_HIDDEN

Specifies whether to show or hide the violation column when viewing the violation in the rule violations UI.

Possible values:

- 0: Show

- 1: Hide

LINK_TEMPLATE

Not used in the current release

LINK_ENCODE

Not used in the current release

IS_LINK_EM_PAGE

Not used in the current release

4.12 MGMT$RULE_KEYWORD

The MGMT$RULE_KEYWORD view stores the keyword list for each rule.

Table 4-12 MGMT$RULE_KEYWORD

Column

Description

RULE_GUID

Unique GUID of the rule

KEYWORD_NAME

Keyword name

KEYWORD_NAME_NLSID

NLSID of the name of the keyword list

IS_SYSTEM

Specifies whether it is a system-defined or a user-defined key word.

4.13 MGMT$CS_KEYWORD

The MGMT$CS_KEYWORD view stores the keyword list for each compliance standard.

Table 4-13 MGMT$CS_KEYWORD

Column

Description

CS_GUID

Unique GUID of the compliance standard

KEYWORD_NAME

Keyword name

KEYWORD_NAME_NLSID

NLSID of the name of the keyword list

IS_SYSTEM

Specifies whether it is a system-defined or a user-defined key word.

4.14 MGMT$CS_GROUP_KEYWORD

The MGMT$CS_GROUP_KEYWORD view stores the keyword list for each standard group.

Table 4-14 MGMT$CS_GROUP_KEYWORD

Column

Description

CSG_GUID

Unique GUID of the standard group

KEYWORD_NAME

Keyword name

KEYWORD_NAME_NLSID

NLSID of the name of the keyword list

IS_SYSTEM

Specifies whether it is a system-defined or a user-defined key word.

4.15 MGMT$CS_RULE_ATTRS

The MGMT$CS_RULE_ATTRS view contains the lists of all the compliance rules attributes.

Table 4-15 MGMT$CS_RULE_ATTRS

Column

Description

RULE_GUID

Unique identifier of the compliance rule.

RULE_INAME

Internal name of the compliance rule.

RULE_DNAME

English display name.

DESCRIPTION

English description of the compliance rule.

TARGET_TYPE

Applicable target type of the compliance rule.

REFERENCE_URL

Reference URL.

RATIONALE

Explains the importance of this compliance rule and the consequences of noncompliance.

FIXTEXT

Explains the necessary steps to bring the target into compliance with respect to this rule.

WARNING

Cautionary or caveat note about this rule

CHECK_GUID

Internal unique identifier.

MESSAGE

Message recorded for new violation.

CLEAR_MESSAGE

Message recorded for clear violation.

SEVERITY

Severity of the compliance rule.

VERSION

Version of the compliance rule.

LIFECYCLE_STATE

Lifecycle status of the compliance rule.

AUTHOR

Author of the compliance rule.

OWNER

Owner of the compliance rule.

LAST_UPDATED_DATE

Timestamp of the last edit to the compliance rule.

LAST_UPDATED_BY

User who edited rule.

EVAL_ALWAYS

Flag to suggest evaluation roll-up mandatory.

TABLE_NAMES

Table names for the compliance rule.

RULE_DNAME_NLSID

Rule display name NLSID for nonEnglish users.

DESCRIPTION_NLSID

Rule description NLSID for nonEnglish users.

RATIONALE_NLSID

Rule impact NLSID for nonEnglish users.

FIXTEXT_NLSID

Rule recommendation NLSID for nonEnglish users.

WARNING_NLSID

Rule warning NLSID for nonEnglish users.

MESSAGE_NLSID

Rule message NLSID for nonEnglish users.

CLEAR_MESSAGE_NLSID

Rule clear message NLSID for nonEnglish users.

RULE_TYPE

Code to represent the type of rule.

Possible values:

- 1: Repository

- 2: Agent

- 3: Monitoring

IS_SYSTEM

Code to represent whether the rule is system defined.

Possible values:

- 0 - False

- 1 - True

4.16 MGMT$CS_HIERARCHY

The MGMT$CS_HIERARCHY view contains all the standard hierarchy metadata.

Table 4-16 MGMT$CS_HIERARCHY

Column

Description

PARENT_GUID

Unique identifier of the parent. It can refer to the compliance standard or the rule folder GUID.

PARENT_TYPE_NAME

The name of the parent type.

Possible values:

- null parent

- compliance standard

- rulefolder

PARENT_TYPE

The parent type.

Possible values:

- =0: null parent

- =1: compliance standard

- =2: rulefolder

CHILD_GUID

Unique identifier of the child. This can refer to the compliance standard, rule folder, or rule GUID

CHILD_TYPE_NAME

The name of the child type.

Possible values:

- =1: compliance standard

- =2: rulefolder

- =3: rule

CHILD_TYPE

The child type.

Possible value:

- =1: compliance standard

- =2: rulefolder

- =3: rule

CHILD_POSITION

Position of the child with respect to immediate peer nodes.

IMPORTANCE_LEVEL_NAME

Name of the importance level:

Possible values:

- high

- normal

- low

IMPORTANCE_LEVEL

Importance level.

Possible values:

- =1: high

- =2: normal

- =3: low

4.17 MGMT$CS_RQS_HIERARCHY

The MGMT$CS_RQS_HIERARCHY view contains standard runtime hierarchy metadata. Note that the primary key is PARENT_RQS_GUID, PARENT_GUID, CHILD_RQS_GUID, CHILD_GUID.

Table 4-17 MGMT$CS_RQS_HIERARCHY

Column

Description

ROOT_CS_GUID

Unique identifier of the root compliance standard.

PARENT_RQS_GUID

Unique identifier of the parent with respect to the inclusion within the root compliance standard.

PARENT_GUID

Unique identifier of the parent.

PARENT_TYPE

The parent type.

Possible values:

- =0: null

- =1: compliance standard

- =2: rulefolder

CHILD_RQS_GUID

Unique identifier of the child with respect to the inclusion within the root compliance standard.

CHILD_GUID

Unique identifier of the child.

CHILD_TYPE_NAME

The name of the child type.

Possible values:

- =1: compliance standard

- =2: rulefolder

- =3: rule

CHILD_TYPE

The child type.

Possible value:

- =1: compliance standard

- =2: rulefolder

- =3: rule

CHILD_POSITION

Position of the child with respect to immediate peer nodes.

4.18 MGMT$CS_RULEFOLDER

The MGMT$CS_RULEFOLDER view contains all rule folder metadata.

Table 4-18 MGMT$CS_RULEFOLDER

Column

Description

RULEFOLDER_GUID

Unique identifier of the compliance standard rule folder.

CS_GUID

Unique identifier of the compliance standard to which the rule folder belongs.

RULEFOLDER_INAME

Internal name of rule folder

RULEFOLDER_DNAME

Display name of rule folder

DESCRIPTION

Description of rule folder

REFERENCE_URL

Reference URL

RULEFOLDER_DNAME_NLSID

NLSID of the rule folder display name

DESCRIPTION_NLSID

NLSID of the description name

4.19 MGMT$CSG_HIERARCHY

The MGMT$CSG_HIERARCHY view contains compliance standard group hierarchy metadata.

Table 4-19 MGMT$CSG_HIERARCHY

Column

Description

PARENT_GUID

Unique identifier of the parent.This can refer to either the compliance group or the compliance subgroup GUID.

PARENT_TYPE_NAME

The name of the parent type.

Possible values:

- parent

- compliance group

- subgroup

PARENT_TYPE

The parent type.

Possible values:

- =0: null parent

- =4: compliance group

- =5: subgroup

CHILD_GUID

Unique identifier of the child. This can refer to compliance standard or subgroup.

CHILD_TYPE_NAME

Description of the rule folder

CHILD_TYPE

The child type.

Possible values:

- =1: compliance standard

- =2: rulefolder

- =3: rule

CHILD_POSITION

Position of the child with respect to immediate peer nodes

IMPORTANCE_LEVEL

Importance level.

Possible values:

- =1: high

- =2: normal

- =3: low

4.20 MGMT$CSG_SUBGROUP

The MGMT$CSG_SUBGROUP view contains the em_csg_subgroup attributes.

Table 4-20 MGMT$CSG_SUBGROUP

Column

Description

SUBGROUP_GUID

Unique identifier of the subgroup.

CSG_GUID

Unique identifier of compliance standard group.

Note: You can obtain this from the MGMT$COMPLIANCE_STANDARD_GROUP view.

SUBGROUP_INAME

Internal name of the subgroup

SUBGROUP_DNAME

Display name of the subgroup

DESCRIPTION

Description of the subgroup

REFERENCE_URL

Reference URL.

SUBGROUP_DNAME_NLSID

NLSID of the subgroup display name

DESCRIPTION_NLSID

NLSID of the subgroup description

4.21 MGMT$CSR_TARGET_ASSOC

This MGMT$CSR_TARGET_ASSOC view contains rule and target association settings information.

Table 4-21 MGMT$CSR_TARGET_ASSOC

Column

Description

SUBGROUP_GUID

Unique identifier of the subgroup.

RQS_GUID

Unique identifier of the rule inclusion within the root compliance standard.

RULE_GUID

Unique identifier of the rule

ROOT_TARGET_GUID

Unique identifier of the root target

TARGET_GUID

Unique identifier of the target

IMPORTANCE

Importance of this association link within a compliance standard hierarchy

OBJECT_TYPE_NAME

Name of the object type

OBJECT_TYPE

Object type

Possible values:

- =1: target type

- =2: target

EDIT_VERSION

This version number is increased by 1 after each edit. Used for concurrency control.

CRITICAL_EDIT_VERSION

This version number is increased by 1 after each critical edit. Used for concurrency control

REASON

Reason for enabling or disabling the association

STATUS_NAME

Status name

Possible values:

- enabled

- disabled

- pending enable

- pending disable

- failed

- system disabled

STATUS

Status value

Possible values:

- =1: enabled

- =2: disabled

- =3: pending enable

- =4: pending disable

- =5: failed

- =6: system disabled

STATUS_CODE_NAME

Status code name

Possible values:

- user

- system

STATUS_CODE

Status code value

Possible values:

- =1: user

- =2: system

4.22 MGMT$CSRF_TARGET_ASSOC

This MGMT$CSRF_TARGET_ASSOC view contains rule folder and target association settings information.

Table 4-22 MGMT$CSRF_TARGET_ASSOC

Column

Description

ROOT_CS_GUID

Unique identifier of the compliance standard rule folder

RQS_GUID

Unique identifier of the rule folder inclusion within the root compliance standard

RULEFOLDER_GUID

Unique identifier of the rule folder

ROOT_TARGET_GUID

Unique identifier of the root target

TARGET_GUID

Unique identifier of the target

IMPORTANCE

Importance of this association link within a compliance standard hierarchy

OBJECT_TYPE_NAME

Name of the object type

OBJECT_TYPE

Object type

Possible values:

- =1: target type

- =2: target

EDIT_VERSION

This version number is increased by 1 after each edit. Used for concurrency control.

CRITICAL_EDIT_VERSION

This version number is increased by 1 after each critical edit. Used for concurrency control

REASON

Reason for enabling or disabling the association

STATUS_NAME

Status name

Possible values:

- Enabled

- Disabled

- Pending enable

- Pending disable

- Failed

- System disabled

STATUS

Status value

Possible values:

- =1: enabled

- =2: disabled

- =3: pending enable

- =4: pending disable

- =5: failed

- =6: system disabled

STATUS_CODE_NAME

Status code name

Possible values:

- user

- system

STATUS_CODE

Status code value

Possible values:

- =1: user

- =2: system

IS_CUSTOMIZED_LABEL

Label for specifying customization

Possible values:

- =1: yes

- =0: no

IS_CUSTOMIZED

Specifies if there is customization

Possible values:

- =1: yes

- =0: no

4.23 MGMT$REPO_RULE_CHK_DETAILS

This MGMT$REPO_RULE_CHK_DETAILS view contains the rule check details.

Table 4-23 MGMT$REPO_RULE_CHK_DETAILS

Column

Description

RULE_GUID

Unique identifier of the rule

SOURCE

Source for the rule

CONDITION

Condition for the rule

CONDITION_TYPE_NAME

Name of the condition type

Possible values:

- Simple

- SQL Expression

CONDITION_OP_NAME

Condition operator for the condition

4.24 MGMT$REPOSITORY_RULE_BIND_VARS

This MGMT$REPOSITORY_RULE_BIND_VARS view contains the bind variables for the compliance rule.

Table 4-24 MGMT$REPOSITORY_RULE_BIND_VARS

Column

Description

RULE_GUID

Unique identifier of the rule for which the bind variable is defined

BIND_COLUMN_NAME

Name of the bind variable to be bound

BIND_COLUMN_TYPE

Type of the bind variable to be bound

4.25 MGMT$REPOSITORY_RULE_PARAMS

This MGMT$REPOSITORY_RULE_PARAMS view contains the rule parameters.

Table 4-25 MGMT$REPOSITORY_RULE_PARAMS

Column

Description

RULE_GUID

Unique identifier of the rule for which the parameter is defined

PARAM_NAME

Name of the policy parameter

PARAM_NAME_NLSID

NLSID of the policy parameter

PARAM_TYPE

Type of the policy parameter

4.26 MGMT$CS_TGT_ASSOC_TXF_REQ

This MGMT$CS_TGT_ASSOC_TXF_REQ view contains the request summary to transfer the compliance association or metadata to the Management Agent.

Table 4-26 MGMT$CS_TGT_ASSOC_TXF_REQ

Column

Description

ROOT_TARGET_GUID

Unique identifier of the root target

TARGET_GUID

Unique identifier of the target

ROOT_CS_GUID

Unique identifier of the root compliance standard

RQS_GUID

Unique identifier of the compliance standard inclusion within the root compliance standard

CS_GUID

Unique identifier of the compliance standard

CREATION_TS

Timestamp of the creation

STATUS

Status of the transfer

Possible values:

- 0: Pending

- 1: Successfully done

- 2: Failed

SYNC_ID

Sync ID corresponding to the association. This is required for the status update of the template collections.

IN_PROCESS

For rows with status pending, this column indicates if the row is being processed currently

Possible values:

- 0: Processing in progress

- 1: Processing done

SEQ

Note: This column is for internal use only.

Column sequence number. Contains the unique sequence ID of the row. Used to maintain identity across job restarts for Management Agent standards.

4.27 MGMT$EM_CS_RULE_EVENT_ERROR

This MGMT$EM_CS_RULE_EVENT_ERROR view stores the error stack when publishing errors for compliance standards or rules.

Table 4-27 MGMT$EM_CS_RULE_EVENT_ERROR

Column

Description

ROOT_CS_GUID

Unique identifier of the root compliance standard

CS_GUID

Unique identifier of the compliance standard

RULE_GUID

Unique identifier of the rule

RQS_GUID

Unique identifier of the rule folder inclusion within the root compliance standard

TARGET_GUID

Unique identifier of the target

ROOT_TARGET_GUID

Unique identifier of the root target

VIOLATION_GUID

Unique identifier of the violation

ERROR_MSG

Error message

ERROR_STACK

Error stack trace

ERROR_TIME

Timestamp of the event error

4.28 MGMT$CCC_ALL_OBS_BUNDLES

The MGMT$CCC_ALL_OBS_BUNDLES view returns a summary of all observation bundles. Ensure that any query against this view uses filtering on appropriate fields with BUNDLE_START_TIME being the first to take advantage of partitions.

Table 4-28 MGMT$CCC_ALL_OBS_BUNDLES

Column

Description

BUNDLE_ID

The bundle to which this observation belongs based on the rule bundle settings

TARGET

Target against which this observation was found

TARGET_TYPE

Type of the target

RULE_NAME

Name of the real-time Monitoring Compliance Standard Rule

ENTITY_TYPE

Entity type of the entity that had an action against it

USER_PERFORMING_ACTION

Name of the user that performed the action

BUNDLE_IN_VIOLATION

Boolean value if the bundle is in violation currently. This means at least one observation in the bundle is unauthorized. True means bundle is in violation

BUNDLE_START_TIME

Date of the first observation in this bundle

BUNDLE_CLOSE_TIME

Date when this bundle was closed

BUNDLE_CLOSE_REASON

Explanation of why this bundle was closed

DISTINCT_OBS_COUNT

Total number of observations in this bundle

AUTHORIZED_OBS_COUNT

Number of observations in this bundle that are currently authorized

UNAUTHORIZED_OBS_COUNT

Number of observations in this bundle that are currently unauthorized

UNAUTH_CLEARED_OBS_COUNT

Number of observations in this bundle that are currently cleared (at one point they were unauthorized)

UNAUDITED_OBS_COUNT

Number of observations in this bundle that are currently unaudited. They have not been evaluated manually or with Change Management integration to determine audit status

4.29 MGMT$CCC_ALL_OBSERVATIONS

The MGMT$CCC_ALL_OBSERVATIONS view returns all observations that have occurred. Any query against this view should ensure that filtering is done on appropriate fields with action_time being the first to take advantage of partitions.

Table 4-29 MGMT$CCC_ALL_OBSERVATIONS

Column

Description

OBSERVATION_ID

Unique ID given to the observation when detected by the agent

BUNDLE_ID

Bundle this observation belongs to based on rule bundle settings

TARGET

Target this observation was found against

TARGET_TYPE

Type of the target

ENTITY_TYPE

Entity type of the entity that had an action against it

ACTION

Action that was observed

ACTION_TIME

Time the action occurred

USER_TYPE

Type of user that performed the action (that is, OS user versus DB user)

USER_PERFORMING_ACTION

Name of the user that performed the action

ORIGINAL_USER_NAME

Previous user name in the case of a SU/SUDO action (only applicable to some entity types)

AFFECTED_ENTITY_NAME

Name of the entity that was affected by this action (file name, and so on)

AFFECTED_ENTITY_PREVIOUS_NAME

Name of the entity prior to the action. For example, for file rename actions, this would be the old file name.

SOURCE_HOST_IP

Source IP of a connection when an action comes from another host (only applicable to some entity types)

ACTION_PROCESS_ID

Process ID of the process that performed the action (only applicable to some entity types)

ACTION_PROCESS_NAME

Name of the process that performed the action (only applicable to some entity types)

ACTION_PARENT_PROCESS_ID

Process ID of the parent process of the process that performed the action (only applicable to some entity types)

ACTION_PARENT_PROCESS_NAME

Name of the parent process of the process that performed the action (only applicable to some entity types)

ENTITY_PREVIOUS_VALUE

Previous value of the entity (only applicable to some entity types)

ENTITY_NEW_VALUE

New value of the entity (only applicable to some entity types)

FILE_ENTITY_PREVIOUS_MD5_HASH

Previous MD5 hash value of the entity (only applicable to some entity types)

FILE_ENTITY_NEW_MD5_HASH

New MD5 hash value of the entity (only applicable to some entity types)

AUDIT_STATUS

Current audit status of the observation (unaudited, authorized, unauthorized, and so on)

AUDIT_STATUS_SET_DATE

Date the most recent audit status was set

AUDIT_STATUS_SET_BY_USER

User who set the most recent audit status

4.30 MGMT$CCC_ALL_VIOLATIONS

The MGMT$CCC_ALL_VIOLATIONS view returns all real-time monitoring violations caused by an observation bundle having at least one unauthorized observation in it.

Table 4-30 MGMT$CCC_ALL_VIOLATIONS

Column

Description

RULE_TYPE

Type of rule

Possible values:

- Repository

- WebLogic Server Signature

- Real-time Monitoring

SEVERITY

Severity level of the rule

- Info

- Warning

- Critical

ENTITY_TYPE

Entity type of the observation bundle and all observations inside that bundle

TARGET_TYPE

Target type of the observation bundle and all observations inside that bundle

RULE_NAME

Name of the rule that this violation is against

COMPLIANCE_STANDARD_NAME

Name of the compliance standard that this violation is against.

TARGET

Name of the target that this violation is against.

BUNDLE_ID

Internal ID of the obervation bundle that is in violation. This observation bundle has one or more unauthorized observations in it

BUNDLE_START_TIME

Time that the observation bundle started

BUNDLE_CLOSE_TIME

Time that the observation bundle closed

USER_NAME

User name that performed the actions in this bundle

AUTHORIZED_OBS_COUNT

Number of authorized observations in the observation bundle involved in this violation

UNAUTHORIZED_OBS_COUNT

Number of unauthorized observations in the observation bundle involved in this violation.

UNAUTH_CLEARED_OBS_COUNT

Number of unauthorized-cleared observations in the observation bundle involved in this violation

ROOT_CS_ID

Root compliance standard ID. This is used for the internal representation of the violation context.

RQS_ID

Runtime compliance standard ID. This is used for the internal representation of the violation context

RULE_ID

Internal ID of the rule with the violation.

TARGET_ID

Internal ID of the target with the violation.

ROOT_TARGET_ID

Internal ID of the target hierarchy.

4.31 MGMT$COMPLIANT_TARGETS

The MGMT$COMPLIANT_TARGETS view returns all evaluation and violation details for all targets. This is the same data that is shown in the Compliance Summary dashboard regions for targets.

Table 4-31 MGMT$COMPLIANT_TARGETS

Column

Description

TARGET_NAME

Name of the target

TARGET_TYPE

Target type of the target

CRIT_EVALS

Number of critical-level evaluations

WARN_EVALS

Number of warning-level evaluations

COMPLIANT_EVALS

Number of compliant evaluations

CRIT_VIOLATIONS

Number of critical-level violations

WARN_VIOLATIONS

Number of warning-level violations

MWARN_VIOLATIONS

Number of minor warning-level violations

COMPLIANCE_SCORE

Current compliance score for the target

TARGET_ID

Internal representation of the target

TARTGET_TYPE_INAME

Internal representation of the target type

4.32 MGMT$COMPLIANCE_SUMMARY

The MGMT$COMPLIANCE_SUMMARY view returns all evaluation and violation details for compliance standards and frameworks. This is the same data that is shown in the Compliance Summary dashboard regions for compliance standards and frameworks.

Table 4-32 MGMT$COMPLIANCE_SUMMARY

Column

Description

ELEMENT_TYPE

Type of element (compliance standard, compliance framework)

ELEMENT_NAME

Display name of the compliance standard or compliance framework

CRIT_EVALS

Number of critical-level evaluations

WARN_EVALS

Number of warning-level evaluations

COMPLIANT_EVALS

Number of compliant evaluations

CRIT_VIOLATIONS

Number of critical-level violations

WARN_VIOLATIONS

Number of warning-level violations

MWARN_VIOLATIONS

Number of minor warning-level violations

COMPLIANCE_SCORE

Current compliance score for the compliance standard or framework

NON_COMPLIANT_SCORE

Current non-compliant score for the compliance standard or framework

AUTHOR

Author of the compliance standard or framework

VERSION

Version of the compliance standard or framework

ELEMENT_ID

Internal ID of the compliance standard or compliance framework

FRAMEWORK_ID

Internal ID of the compliance framework

ELEMENT_INAME

Internal representation of the compliance standard or framework

4.33 MGMT$COMPLIANCE_TREND

The MGMT$COMPLIANCE_TREND view returns the last 31 days compliance trend information for compliance frameworks and standards. This is the same data that is shown in the Compliance Summary dashboard trend regions for compliance standards and frameworks.

Table 4-33 MGMT$COMPLIANCE_TREND

Column

Description

ELEMENT_TYPE

Type of element (compliance standard, compliance framework)

ELEMENT_ID

Internal ID representation of the compliance standard or framework

ELEMENT_NAME

Display name of the compliance standard or compliance framework

FRAMEWORK_ID

Internal ID representation of the compliance framework

AVG_COMPLIANCE_SCORE

Average compliance score over the last 31 days

DAILY_AVG_VIOLATIONS

Average number of violations per day over the last 31 days

SNAPSHOT_TS

The snapshot time stamp

TOTAL_EVALS

Total evaluations over the last 31 days

ELEMENT_INAME

Internal representation of the compliance standard or framework

5 Configuration Management Views

This chapter provides a description ofconfiguration management views. It contains the following sections:

- Configuration Management Views

- Custom Configuration Specification Views

- Database Configuration Views

- Enterprise Configuration Management Views

For examples of how to use views, see Chapter 20, "Examples".

5.1 Configuration Management Views

This section provides a description of each configuration management view and its columns. It contains the following sections:

- MGMT$CSA_COLLECTIONS

- MGMT$CSA_FAILED

- MGMT$CSA_HOST_OS_COMPONENTS

- MGMT$CSA_HOST_SW

- MGMT$CSA_HOST_COOKIESMGMT$CSA_HOST_CUSTOM

- MGMT$CSA_HOST_CUSTOM

- MGMT$CSA_HOST_RULES

- MGMT$CSA_HOST_RULES

- MGMT$CSA_HOST_CPUS

- MGMT$CSA_HOST_IOCARDS

- MGMT$CSA_HOST_NICS

- MGMT$CSA_HOST_OS_PROPERTIES

- MGMT$CSA_HOST_OS_FILESYSEMS

5.1.1 MGMT$CSA_COLLECTIONS

The MGMT$CSA_COLLECTIONS view displays top-level information about all client configurations.

Table 5-1 MGMT$CSA_COLLECTIONS

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

CSACLIENT

The display name plus the custom keys, if they exist

COLLECTION_TIMESTAMP

The time at which the data was collected from the client

NET_IP

The actual IP address of the client

NET_EFFECTIVE_IP

The client IP address seen by the server

COLLECTION_MESSAGE

Error message generated while applet was running

OS_USER_NAME

The client's OS user name

HOSTNAME

The client's host name

DOMAIN

The client's domain

BOOT_DISK_VOLUME_SERIAL_NUM

The client's boot disk volume serial number

COMPLIANCE

The overall compliance score for the client (15=passed, 18=info, 20=warning, 25=critical)

APPID

The collection tag for this client configuration

NET_SUBNET

The client's subnet mask

NET_LATENCY_IN_MS

The client's HTTP response time with the server

NET_BANDWIDTH_IN_KBITPS

The client's download bandwidth from the server

BROWSER_TYPE

The name of the browser used to run CSA

BROWSER_VERSION

The version of the browser used to run CSA

BROWSER

A summary column that combines the browser name and version

BROWSER_JVM_VENDOR

The version of the JVM used to run the applet

BROWSER_JVM_VERSION

The version of the JVM used to run the applet

BROWSER_PROXY_SERVER

The proxy server used by the browser

BROWSER_PROXY_EXCEPTIONS

The client's browser proxy exceptions

BROWSER_CACHE_SIZE_IN_MB

The client browser's disk cache size

BROWSER_CACHE_UPATE_FRQ

The browser's cache update policy

BROWSER_HTTP1_1_SUPPORT

Whether or not the browser supports HTTP 1.1

REFERRING_URL_HEADER

The URL from which the user came to CSA, minus the query string

REFERRING_URL_PARAMS

The query string of the URL from which the user came to CSA

REFURL

The complete URL from which the user came to CSA

CSA_URL_HEADER

The URL from which the user ran CSA, minus the query string

CSA_URL_PARAMS

The query string of the URL from which the user ran CSA

CSAURL

The complete URL from which the user ran CSA

DESTINAION_URL_HEADER

The destination URL, minus the query string

DESTINATION_URL_PARAMS

The query string of the destination URL

DESTURL

The complete destination URL

CONNECTION_TYPE

The estimated connection type, based on the download bandwidth (1=LAN, 2=cable, 3=dialup)

IS_WINDOWS_ADMIN

Whether or not the os user is a Windows administrator

WINDOWS_DOMAIN

The Windows domain of the host

BROWSER_PROXY_ENABLED

Whether or not the proxy server is enabled in the browser

AUTO_CONFIG_URL

The URL of the proxy auto-configuration script used by the browser

NUMBER_OF_COOKIES

The number of cookies collected by CSA

NUMBER_OF_CUSTOM_VALUES

The number of custom properties collected by CSA

HARDWARE

A summary of the system configuration, machine architecture, memory, disk space, and CPU

HARDWARE_VENDOR_NAME

The name of the hardware vendor, such as Dell

SYSTEM_CONFIG

The client's system configuration

MACHINE_ARCHITECTURE

The client's machine architecture

BUS_FREQ_IN_MHZ

The frequency of the motherboard's Front Side Bus (FSB)

MEMORY_SIZE_IN_MB

The total amount of physical memory

AVAIL_MEMORY_SIZE_IN_MB

The amount of available physical memory when CSA was run

LOCAL_DISK_SPACE_IN_GB

The total amount of disk space

AVAIL_LOCAL_DISK_SPACE_IN_GB

The available disk space

CPU_COUNT

The number of CPUs

SYSTEM_SERIAL_NUMBER

The host's serial number

MIN_CPU_SPEED_IN_MHZ

The minimum possible CPU speed

MAX_CPU_SPEED_IN_MHZ

The maximum possible CPU speed

CPU

The CPU vendor, implementation, and frequency

CPU_BOARD_COUNT

The number of CPU boards

IOCARD_COUNT

The number of IO cards

NIC_COUNT

The number of NICs

FAN_COUNT

The number of fans

POWER_SUPPLY_COUNT

The number of power supplies

SYSTEM_BIOS

The system BIOS

OPERATINGSYSTEM

A summary of the OS name, version, update level, address length, and distributor version

OS_NAME

The OS name

OS_VENDOR_NAME

The OS vendor name

OS_BASE_VERSION

The OS base version

OS_UPDATE_LEVEL

The OS update level

OS_DISTRIBUTOR_VERSION

The OS distributor version

MAX_SWAP_SPACE_IN_MB

The maximum amount of swap space

OS_ADDRESS_LENGTH_IN_BITS

The OS address length in bits

MAX_PROCESS_VIRTUAL_MEMORY

The maximum amount of virtual memory that can be allocated to a process

TIMEZONE

The time zone as reported in the registry

TIMEZONE_REGION

The time zone region as reported by the JVM

TIMEZONE_DELTA

The offset in minutes from GMT

NUMBER_OF_OS_PROPERTIES

The number of OS properties found

NUMBER_OF_OS_PATCHES

The number of OS patches found

NUMBER_OF_OS_FILESYSTEMS

The number of file systems found

NUMBER_OF_OS_REGISTERED_SW

The number of OS-registered software products found

SNAPSHOT_ID

The GUID of this configuration

TARGET_ID

The GUID of the collector target

INTERNAL_TARGET_NAME

The internal name of the client configuration

INTERNAL_TARGET_TYPE

oracle_csa_client

COLLECTION_DURATION

The amount of time it took to run CSA

LOADED_TIMESTAMP

The time at which the data was loaded into the repository

APPLET_VERSION

The version of the applet

TARGET_ID_METHOD

not used

CUSTOM_CLASS

The name of the custom class (if any)

CUSTOM_CLASS_VERSION

not used

KEY1

Custom key 1(optional)

KEY2

Custom key 2 (optional)

KEY3

Custom key 3 (optional)

PROXY_TARGET_NAME

The name of the collector target

PROXY_TARGET_DISPLAY_NAME

The display name of the collector target

PROXY_TARGET_ID

The GUID of the collector target

RULES_COUNT

The total number of rules evaluated (including rules with status of NA)

RULES_NA_COUNT

The number of rules that were not applicable

RULES_PASSED_COUNT

The number of rules that passed

RULES_INFO_COUNT

The number of rules that failed with status info

RULES_WARNING_COUNT

The number of rules that failed with status warning

RULES_CRITICAL_COUNT

The number of rules that failed with status critical

5.1.2 MGMT$CSA_FAILED

The MGMT$CSA_FAILED view displays all failed collections.

Table 5-2 MGMT$CSA_FAILED

Column

Description

ID

The GUID of this failed collection

TIMESTAMP

The time at which this failed collection occurred

TIMEZONE_DELTA

The offset in minutes from GMT

SAVED_TIMESTAMP

The time at which the data was loaded in the repository

EFFECTIVE_IP

The effective IP address of the client

APPID

The collection tag

REFERRING_URL_HEADER

The URL from which the user was referred to CSA, minus the query string

REFERRING_URL_PARAMS

The query string of the URL from which the user was referred to CSA

CSA_URL_HEADER

The URL from which the user ran CSA, minus the query string

CSA_URL_PARAMS

The query string of the URL from which the user tried to run CSA

DESTINATION_URL_HEADER

The destination URL minus the query string

DESTINATION_URL_PARAMS

The query string of the destination URL

BROWSER_TYPE

The type of browser used to run CSA

BROWSER_VERSION

The version of the browser used to run CSA

BROWSER_JVM_VENDOR

The vendor of the JVM used to run CSA

BROWSER_JVM_VERSION

The version of the JVM used to run CSA

OS_ARCH

The OS architecture of the client as reported in the ìos.archî Java system property

OS_NAME

The OS name of the client as reported in the ìos.nameî Java system property

HTTP_REQUEST_USER_AGENT

The HTTP user-Agent header sent by the client

ERROR_CODE

The error condition that caused the failed collection (0=OS not supported, 1=browser not supported, 2=applet certificate refused by user, 3=other error)

ERROR_TEXT

Text that is collected along with the error code, such as a stack trace

5.1.3 MGMT$CSA_HOST_OS_COMPONENTS

The MGMT$CSA_HOST_OS_COMPONENTS view displays all OS components find on CSA client systems.

Table 5-3 MGMT$CSA_HOST_OS_COMPONENTS

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

TYPE

The type of the component

NAME

The name of the component

VERSION

The version of the component

DESCRIPTION

The description of the component

ISNTALLATION_DATE

The date the component was installed

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The target GUID of the collector target

COLLECTION_TIMESTAMP

The time at which the client configuration was collected

5.1.4 MGMT$CSA_HOST_SW

The MGMT$CSA_HOST_SW view displays all OS-registered software found on CSA hosts.

Table 5-4 MGMT$CSA_HOST_SW

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

NAME

The name of the software

VENDOR_NAME

The name of the software vendor

VERSION

The version of the software

INSTALLATION_DATE

The date on which the software as installed

INSTALLED_LOCATION

The location in which the software is installed

DESCRIPTION

The description of the software

VENDOR_SW_SPECIFIC_INFO

Any additional information provided by the vendor

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.1.5 MGMT$CSA_HOST_COOKIES

The MGMT$CSA_HOST_COOKIES view displays the cookies collected with client configurations.

Table 5-5 MGMT$CSA_HOST_COOKIES

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

NAME

The name of the cookie

VALUE

The payload of the cookie

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.1.6 MGMT$CSA_HOST_CUSTOM

The MGMT$CSA_HOST_CUSTOM view displays the custom properties collected with client configurations.

Table 5-6 MGMT$CSA_HOST_CUSTOM

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

TYPE

The category of the custom property

NAME

The name of the custom property

TYPE_UI

The display category of the custom property

NAME_UI

The display name of the custom property

VALUE

The value of the custom property

DISPLAY_UI

Should this property be displayed in the UI? Y or N

HISTORY_TRACKING

Not used

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.1.7 MGMT$CSA_HOST_RULES

The MGMT$CSA_HOST_RULES view displays the rules that were evaluated with each client configuration.

Table 5-7 MGMT$CSA_HOST_RULES

Column

Description

SNAPSHOT_ID

The snapshot ID of the client configuration

NAME

The name of the rule

DESCRIPTION

The description of the rule

STATUS

The status of the rule (-2=NA, 15=passed, 18=info, 20=warning, 25=critical)

MOREINFO

Any additional information for the rule

5.1.8 MGMT$CSA_HOST_CPUS

The MGMT$CSA_HOST_CPUS view displays information about the CPUs of CSA hosts. CSA assumes that in a multi-CPU host, all CPUs are identical.

Table 5-8 MGMT$CSA_HOST_CPUS

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

VENDOR_NAME

The name of the CPU vendor

FREQ_IN_MHZ

The clock frequency of the CPU

ECACHE_IN_MB

The size of the extended cache

IMPL

The CPU implementation

REVISION

The CPU revision

MASK

The CPU mask

NUMBER_OF_CPUS

The number of CPUs

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.1.9 MGMT$CSA_HOST_IOCARDS

The MGMT$CSA_HOST_IOCARDS view displays all IO cards collected from client configurations.

Table 5-9 MGMT$CSA_HOST_IOCARDS

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

VENDOR_NAME

The name of the IO card vendor

NAME

The name of the IO card

FREQ_IN_MHZ

The frequency of the IO card bus

BUS

The bus type (PCI or AGP)

REVISION

The IO card revision

NUMBER_OF_IOCARDS

The number of cards

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.1.10 MGMT$CSA_HOST_NICS

The MGMT$CSA_HOST_NICS view displays all network interface cards collected from client configurations.

Table 5-10 MGMT$CSA_HOST_NICS

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

NAME

The name of the NIC

DESCRIPTION

The description of the NIC

FLAGS

Flags set on the NIC – not applicable for Windows

MAX_TRANSFER_UNIT

The maximum transfer unit of the NIC

INET_ADDRESS

The IP address of the NIC

MASK

The subnet mask of the NIC

BROADCAST_ADDRESS

The broadcast address of the NIC

MAC_ADDRESS

The MAC address of the NIC

HOSTNAME_ALIASES

Any aliases for the host name that are stored in the NIC

DEFAULT_GATEWAY

The default gateway for the NIC

DHCP_ENABLED

Whether or not DHCP is enabled

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.1.11 MGMT$CSA_HOST_OS_PROPERTIES

The MGMT$CSA_HOST_OS_PROPERTIES view displays all OS properties, such as environment variables, found on CSA hosts.

Table 5-11 MGMT$CSA_HOST_OS_PROPERTIES

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

SOURCE

The source (e.g. the system environment) of the property

NAME

The name of the property

VALUE

The value of the property

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.1.12 MGMT$CSA_HOST_OS_FILESYSEMS

The MGMT$CSA_HOST_OS_FILESYSEMS view displays all file systems found on CSA hosts.

Table 5-12 MGMT$CSA_HOST_OS_FILESYSEMS

Column

Description

DISPLAY_TARGET_NAME

The display name of the client

RESOURCE_NAME

The name of the file system

MOUNT_LOCATION

The location from which it is mounted

TYPE

The file system type

DISK_SPACE_IN_GB

The total disk space

AVAIL_DISK_SPACE_IN_GB

The available disk space

LOCAL_DRIVE

The Windows drive letter on which it is mounted

MOUNT_OPTIONS

The mount options

SNAPSHOT_ID

The snapshot ID of the client configuration

TARGET_ID

The ID of the collector target

COLLECTION_TIMESTAMP

The time at which the data was collected

5.2 Custom Configuration Specification Views

This section provides a description of each custom configuration specification (CCS) view and its columns. It contains the following sections:

- MGMT$CCS_DATA

- MGMT$CCS_DATA_SOURCE

- MGMT$CCS_DATA_VISIBLE

- MGMT$CCS_DATA

5.2.1 MGMT$CCS_DATA

The MGMT$CCS_DATA view provides both current and saved data, that is data saved from configurations.

Table 5-13 MGMT$CCS_DATA

Column

Description

CM_TARGET_GUID

The unique ID for the target

CM_TARGET_TYPE

The type of the target

CM_TARGET_NAME

The name of the target

CM_SNAPSHOT_TYPE

Type of snapshot

CCS_UI_NAME

Display CCS name

CCS_DRAFT_NUMBER

Draft number of the CCS for draft CCSs. (It is 0 for nondraft CCS)

LAST_COLLECTION_TIMESTAMP

The timestamp of the collection specified in the target's time zone

ECM_SNAPSHOT_ID

The Enterprise Configuration Management (ECM) snapshot ID that can be used to join with other ECM views

DATA_SOURCE_NAME

Depending on the value for EXPR_TYPE, this is one of the following:

- File name (relative to the base path)

- OS command name

- Database SQL query name

CONTAINER

A slash (/) separated hierarchal container with additional identification information and order information. This column could be a single space but only if the attribute name and value are available and are at the top level of the hierarchy.

ATTR

Attribute name

ATTR_ORDER

The order of the attribute within its enclosing container

CONTAINER_ORDER

The order of the container in the data source contents

VALUE

Attribute value

5.2.2 MGMT$CCS_DATA_SOURCE

The MGMT$CCS_DATA_SOURCE view contains both current and saved data (that is, data from saved configurations). This view can be joined with MGMT$CCS_DATA_SOURCE_VISIBLE on ECM_SNAPSHOT_ID and DATA_SOURCE_NAME.

Table 5-14 MGMT$CCS_DATA_SOURCE

Column

Description

CM_TARGET_GUID

The unique ID for the target

CM_TARGET_TYPE

The type of the target

CM_TARGET_NAME

The name of the target

CM_SNAPSHOT_TYPE

Type of snapshot

CCS_UI_NAME

Display CCS name

CCS_DRAFT_NUMBER

Draft number of the CCS for draft CCSs. (It is 0 for nondraft CCS)

LAST_COLLECTION_TIMESTAMP

The time stamp of the collection specified in the target's time zone

ECM_SNAPSHOT_ID

The Enterprise Configuration Management (ECM) snapshot ID that can be used to join with other ECM views

DATA_SOURCE_NAME

Depending on the value for EXPR_TYPE, this is one of the following:

- File name (relative to the base path)

- OS command name

- Database SQL query name

EXPR_TYPE

The type of expression

Possible values:

- F: Files

- O: OS commands

- D: Database queries

SOURCE_ORDER

Numeric order in which the source was obtained

EXPR_NAME

The name of the expression

- For files, this can be the wildcarded path expression from the custom configuration specification that caused the file to be collected

- For OS commands and database queries, this is a user-specified name for the expression

EXPR_VALUE

The value of the expression

- For files, this is the same as the value for EXPR_NAME

- For OS commands, this is the actual command

- For database queries, this is the actual database query

FULL_PATH

The full path

- For files, this is the full file path

- For OS commands, this is the base directory path

CONTENTS_SIZE

Byte size of contents

HASH

Hash value for collected data

CONTENTS

Character large object (CLOB) contents column with raw contents for this data source

COLLECTION_ERROR_MSG

Any relevant error message for this data source during the collection

PARSING_ERROR_MSG

Any relevant error messages generated during parsing of data contents

5.2.3 MGMT$CCS_DATA_VISIBLE

The MGMT$CCS_DATA_VISIBLE view contains both current and saved data (that is, data from saved configurations).

Table 5-15 MGMT$CCS_DATA_VISIBLE

Column

Description

TARGET_GUID

The unique ID for the target

TARGET_NAME

Name of the target

TARGET_TYPE

Type of target

SNAPSHOT_TYPE

Snapshot type

CCS_UI_NAME

Display CCS name

CCS_DRAFT_NUMBER

Draft number of the CCS for draft CCSs. (It is 0 for nondraft CCS)

DISPLAY_TARGET_NAME

User-friendly display name of the target

DISPLAY_TARGET_TYPE

User-friendly display name of the target type

COLLECTION_TIMESTAMP

Time stamp of the collection specified in the time zone of the target

IS_CURRENT

Specifies whether the data is current or saved

Possible values:

- Y: Current data

- N: Saved data

DESCRIPTION

Snapshot description provided by the user

CREATOR

For saved snapshots, the creator is the Enterprise Manager user who saved the snapshot

SAVED_TIMESTAMP

Time stamp of when the snapshot was saved specified in the time zone of the database

LAST_UPLOAD_TIMESTAMP

Last time (specified in the time zone of the database) when a collection was processed for this snapshot type.

ECM_SNAPSHOT_ID

The Enterprise Configuration Management (ECM) snapshot ID that can be used to join with other ECM views

DATA_SOURCE_NAME

Depending on the value for EXPR_TYPE, this is one of the following:

- File name (relative to the base path)

- OS command name

- Database SQL query name

CONTAINER

A slash (/) separated hierarchal container with additional identification information and order information. This column could be a single space but only if the attribute name and value are available and are at the top level of the hierarchy.

ATTRIBUTE

Attribute name

VALUE

Attribute value

CONTAINER_ORDER

The order of the container in the data source contents

ATTRIBUTE_ORDER

The order of the attribute within its enclosing container

5.2.4 MGMT$CCS_DATA

The MGMT$CCS_DATA view is the same as the MGMT$CCS_DATA_VISIBLE view but it exposes the current most recently collected data only.

Table 5-16 MGMT$CCS_DATA

Column

Description

CM_TARGET_GUID

The unique ID for the target

CM_TARGET_TYPE

Type of the target

CM_TARGET_NAME

Name of the target

CM_SNAPSHOT_TYPE

Type of snapshot

CCS_UI_NAME

Display CCS name

CCS_DRAFT_NUMBER

Draft number of the CCS for draft CCSs. (It is 0 for nondraft CCS)

LAST_COLLECTION_TIMESTAMP

The time stamp of the collection specified in the target's time zone

ECM_SNAPSHOT_ID

The Enterprise Configuration Management (ECM) snapshot ID that can be used to join with other ECM views

DATA_SOURCE_NAME

Depending on the value for EXPR_TYPE, this is one of the following:

- File name (relative to the base path)

- OS command name

- Database SQL query name

CONTAINER

A slash (/) separated hierarchal container with additional identification information and order information. This column could be a single space but only if the attribute name and value are available and are at the top level of the hierarchy.

ATTR

Attribute name

ATTR_ORDER

The order of the attribute within its enclosing container

CONTAINER_ORDER

The order of the container in the data source contents

VALUE

Attribute value

5.3 Database Configuration Views

This section provides a description of each database configuration view and its columns. It includes the following sections:

- MGMT$DB_TABLESPACES

- MGMT$DB_DATAFILES

- MGMT$DB_CONTROLFILES

- MGMT$DB_DBNINSTANCEINFO

- MGMT$DB_FEATUREUSAGE

- MGMT$DB_INIT_PARAMS

- MGMT$DB_LICENSE

- MGMT$DB_REDOLOGS

- MGMT$DB_ROLLBACK_SEGS

- MGMT$DB_SGA

- MGMT$DB_TABLESPACES_ALL

- MGMT$DB_OPTIONS

5.3.1 MGMT$DB_TABLESPACES

The MGMT$DB_TABLESPACES view displays configuration settings for tablespaces. Tablespace settings are collected from the sys.dba_tablespaces, dba_free_space, dba_data_files, dba_temp_files, and v$temp_extent_pool tables.

Table 5-17 MGMT$DB_TABLESPACES

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database containing the data files

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

TABLESPACE_NAME

Name of the tablespace

CONTENTS

Tablespace contents: PERMANENT or TEMPORARY

STATUS

Tablespace status: ONLINE, OFFLINE, or READ ONLY

EXTENT_MANAGEMENT

Extent management tracking: DICTIONARY or LOCAL

ALLOCATION_TYPE

Type of extent allocation in effect for this tablespace

LOGGING

Default logging attribute

TABLESPACE_SIZE

Current size of the tablespace in bytes

INITIAL_EXT_SIZE

Default initial extent size

NEXT_EXTENT

Next extent in the sequence

INCREMENT_BY

Default percent increase for extent size

MAX_EXTENTS

Default maximum number of extents

TABLESPACE_USED_SIZE

Amount of data (in bytes) contained in the tablespace

SEGMENT_SPACE_MANAGEMENT

Indicates whether the free and used segment space in the tablespace is managed using free lists (MANUAL) or bitmaps (AUTO)

BLOCK_SIZE

Tablespace block size

MIN_EXTENTS

Default minimum number of extents

MIN_EXTLEN

Minimum extent size for this tablespace

BIGFILE

Indicates whether the tablespace is a bigfile tablespace (YES) or a smallfile tablespace (NO)

5.3.2 MGMT$DB_DATAFILES

The MGMT$DB_DATAFILES view displays the configuration settings for data files. The data file settings are collected from sources such as sys.dba_data_files, v$datafile, sys.dba_free_space, sys.dba_tablespaces, sys.dba_ temp_files, v$tempfile.

Table 5-18 MGMT$DB_DATAFILES

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database containing the data files

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

FILE_NAME

Name of the data file

TABLESPACE_NAME

Name of the tablespace containing the data file

STATUS

Data file status: ACTIVE or NOT ACTIVE

FILE_SIZE

Size of the data file

AUTOEXTENSIBLE

Autoextensible indicator

INCREMENT_BY

Autoextension increment

MAX_FILE_SIZE

Maximum file size in bytes

OS_STORAGE_ENTITY

OS level storage entity on which the file resides. For regular files it is the name of the file system on which the file resides. For character or raw files it is the name of the raw device

CREATE_BYTES

The initial size of the data file when it was created in bytes

5.3.3 MGMT$DB_CONTROLFILES

The MGMT$DB_CONTROLFILES view displays the configuration settings for database control files.

Table 5-19 MGMT$DB_CONTROLFILES

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database containing the data files

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

FILE_NAME

Name of the database control file.

STATUS

The type of control file:

STANDBY - indicates database is in standby mode

LOGICAL - indicates the database is a logical standby database (not a physical standby)

CLONE - indicates a clone database

BACKUP | CREATED - indicates database is being recovered using a backup or created control file

CURRENT - the control file changes to this type following a standby database activate or database open after recovery

CREATION_DATE

Control file creation date

SEQUENCE_NUM

Control file sequence number incremented by control file transactions

CHANGE_NUM

Last change number in the backup control file. Value is NULL if the control file is not a backup

MOD_DATE

Last timestamp in the backup control file. NULL if the control file is not a backup

OS_STORAGE_ENTITY

OS level storage entity on which the file resides. For regular files it is the name of the file system on which the file resides. For character or raw files it is the name of the raw device

5.3.4 MGMT$DB_DBNINSTANCEINFO

The MGMT$DB_DBNINSTANCEINFO view displays general information about database instance. The instance information is collected from v$database, v$version, v$instance, global_name, database_properties and v$nls_parameters.

Table 5-20 MGMT$DB_DBNINSTANCEINFO

Column

Description

HOST_NAME

Name of the target host where the metrics will be collected

TARGET_NAME

Name of the database target from which the metrics are collected

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

DATABASE_NAME

Name of the database

GLOBAL_NAME

Global name of the database

BANNER

Component name and version number

HOST

Name of the host system

INSTANCE_NAME

Name of the instance

STARTUP_TIME

Time when instance was started up

LOGINS

ALLOWED or RESTRICTED

LOG_MODE

The archive log mode, either ARCHIVELOG or NOARCHIVELOG

OPEN_MODE

Open mode information

DEFAULT_TEMP_TABLESPACE

Default temporary tablespace name

CHARACTERSET

NLS parameter value for NLS_CHARACTERSET

NATIONAL_CHARACTERSET

NLS parameter value for NLS_NCHAR_CHARACTERSET

Usage Notes

This information is collected through the dbconfig metric. However, as this metric is not run for standby databases, this table is not populated for standby targets.

5.3.5 MGMT$DB_FEATUREUSAGE

The MGMT$DB_FEATUREUSAGE view displays information about database feature usage.

Table 5-21 MGMT$DB_FEATUREUSAGE

Column

Description

HOST

Name of the host target where the database feature usage information is collected

DATABASE_NAME

Name of the database where the database feature usage information is collected

INSTANCE_NAME

Name of the instance where the database feature usage information is collected

TARGET_TYPE

Either Oracle_database or rac_database

DBID

A unique number that identifies a database instance

NAME

The feature name

CURRENTLY_USED

TRUE if the feature is currently in use, FALSE if the feature is not in use

DETECTED_USAGES

The number of times the feature has been used by the database

FIRST_USAGE_DATE

The date that the first usage of the feature occurred

LAST_USAGE_DATE

The date of the most recent usage of the feature

VERSION

The version number of the database

LAST_SAMPLE_DATE

The date that the database was last evaluated for feature usage

LAST_SAMPLE_PERIOD

The interval between the LAST_ SAMPLE_DATE date and the database feature usage evaluation before that (by default, seven days)

SAMPLE_INTERVAL

The number of seconds between the LAST_SAMPLE_DATE date and the next database feature usage evaluation

TOTAL_SAMPLES

The total number of database feature usage evaluation samples that have been collected

AUX_COUNT

For Oracle internal use only

DESCRIPTION

The description of the feature

Usage Notes

This view can be used to gain an enterprise-wide view of database feature usage across all Oracle databases.

5.3.6 MGMT$DB_INIT_PARAMS

The MGMT$DB_INIT_PARAMS view displays initialization parameter settings for the database. Initialization parameter settings are collected from v$parameter.

Table 5-22 MGMT$DB_INIT_PARAMS

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database target from which the metrics are collected

TARGET_TYPE

The type of target, such as Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

NAME

Name of the initialization parameter

ISDEFAULT

Indicates whether the parameter value is the default

VALUE

The parameter value

DATATYPE

The data type that the value string can be mapped to, for example, NUMBER, DATE, or TEXT

Usage Notes

This information is collected through the dbconfig metric. However, as this metric is not run for standby databases, this table is not populated for standby targets.

5.3.7 MGMT$DB_LICENSE

The MGMT$DB_LICENSE view displays database license configuration settings. Database license configuration settings are collected from v$license.

Table 5-23 MGMT$DB_LICENSE

Column

Description

HOST_NAME

The name of the host on which the database is running

TARGET_NAME

Name of the database containing the tablespace

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

SESSIONS_MAX

The maximum number of sessions allowed for the database

SESSIONS_WARNING

The number of sessions which will generate a warning for the database

SESSIONS_CURRENT

The current number of sessions for the database

SESSIONS_HIGHWATER

The highest water mark of sessions for the database

USERS_MAX

The maximum number of users for the database

Usage Notes

This view can be used to obtain database license configuration settings across all database targets.

5.3.8 MGMT$DB_REDOLOGS

The MGMT$DB_REDOLOGS view displays redo log configuration settings for the database. Redo log configuration settings are collected from the v$log and v$logfile tables.

Table 5-24 MGMT$DB_REDOLOGS

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database target from which the metrics are collected

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

GROUP_NUM

Redo log group identifier number

STATUS

Log status:

UNUSED - The online redo log has never been written to. This is the state of a redo log that was just added, or just after a RESETLOGS, when it is not the current redo log.

CURRENT - This is the current redo log. This implies that the redo log is active. The redo log could be open or closed.

ACTIVE - The log is active but is not the current log. It is needed for crash recovery. It may be in use for block recovery. It might or might not be archived.

CLEARING - The log is being re-created as an empty log after an ALTER DATABASE CLEAR LOGFILE statement. After the log is cleared, the status changes to UNUSED.

CLEARING_CURRENT - The current log is being cleared of a closed thread. The log can stay in this status if there is some failure in the switch such as an I/O error writing the new log header.

INACTIVE - The log is no longer needed for instance recovery. It may be in use for media recovery. It might or might not be archived.

MEMBERS

Number of members in the log group

FILE_NAME

Redo log file (member) name

ARCHIVED

Archive status either YES or NO

LOGSIZE

Size of the log file in bytes

SEQUENCE_NUM

Log sequence number

FIRST_CHANGE_SCN

Lowest SCN in the log

OS_STORAGE_ENTITY

OS level storage entity on which the file resides. For regular files it is the name of the file system on which the file resides. For character or raw files it is the name of the raw device.

THREAD_NUM

Log thread number

Usage Notes

Obtain redo log group or file configuration settings across all database targets.

5.3.9 MGMT$DB_ROLLBACK_SEGS

The MGMT$DB_ROLLBACK_SEGS view displays rollback segments configuration settings for the database. Rollback segments configuration settings are collected from the sys.dba_rollback_segs and v$rollstat tables.

Table 5-25 MGMT$DB_ROLLBACK_SEGS

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database containing the data files

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

ROLLNAME

Name of the rollback segment

STATUS

Rollback segment status

TABLESPACE_NAME

Name of the tablespace containing the rollback segment

EXTENTS

Number of extents in rollback segment

ROLLSIZE

Size in bytes of rollback segment. This values differs by the number of bytes in one database block from the value of the BYTES column of the ALL/DBA/USER_ SEGMENTS views.

INITIAL_SIZE

Initial extent size in bytes

NEXT_SIZE

Secondary extent size in bytes

MAXIMUM_EXTENTS

Maximum number of extents

MINIMUM_EXTENTS

Minimum number of extents

PCT_INCREASE

Percent increase for extent size

OPTSIZE

Optimal size for rollback segments

AVEACTIVE

Current size of active extents averaged over time

WRAPS

Number of times rollback segment is wrapped

SHRINKS

Number of times the size of a rollback segment decreases

AVESHRINK

Average shrink size

HWMSIZE

High water mark of rollback segment size

Usage Notes

Obtain rollback segments configuration settings across all database targets.

5.3.10 MGMT$DB_SGA

The MGMT$DB_SGA view displays System Global Area (SGA) configuration settings. SGA settings are collected from the v$sga and v$sgastat tables.

Table 5-26 MGMT$DB_SGA

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database containing the datafiles

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

SGANAME

SGA component name

SGASIZE

SGA component size in kilobytes or megabytes

Usage Notes

Obtain System Global Area configuration settings across all database targets.

5.3.11 MGMT$DB_TABLESPACES_ALL

The MGMT$DB_TABLESPACES_ALL view displays configuration settings for tablespaces. Tablespace settings are collected from the sys.dba_tablespaces, dba_free_space, dba_data_files, dba_temp_files, and v$temp_extent_pool tables.

Table 5-27 MGMT$DB_TABLESPACES_ALL

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

TABLESPACE_NAME

Name of the tablespace

CONTENTS

Tablespace contents: PERMANENT or TEMPORARY

STATUS

Tablespace status: ONLINE, OFFLINE, or READ ONLY

EXTENT_MANAGEMENT

Extent management tracking: DICTIONARY or LOCAL

ALLOCATION_TYPE

Type of extent allocation in effect for this tablespace

LOGGING

Default logging attribute

TABLESPACE_SIZE

Current size of the tablespace in bytes

INITIAL_EXT_SIZE

Default initial extent size

INCREMENT_BY

Default percent increase for extent size

MAX_EXTENTS

Default maximum number of extents

Usage Notes

Obtain tablespace configuration settings across all database targets.

5.3.12 MGMT$DB_OPTIONS

The MGMT$DB_OPTIONS view displays whether or not the option is currently LOADED and ACTIVE, or either the option does not exist or is NOT LOADED or INACTIVE. Options settings are collected by checking user name and status in the sys.dba_users and dba_registry tables.

Table 5-28 MGMT$DB_OPTIONS

Column

Description

HOST_NAME

Name of the target where the metrics will be collected

TARGET_NAME

Name of the database containing the data files

TARGET_TYPE

The type of target, for example, Oracle_ database

TARGET_GUID

The unique ID for the database target

COLLECTION_ TIMESTAMP

The date and time when the metrics were collected

NAME

Name of the database option

SELECTED

If the option is currently LOADED and ACTIVE (TRUE), or either the option does not exist or is NOT LOADED or INACTIVE (FALSE)

5.4 Enterprise Configuration Management Views

This section provides a description of each enterprise configuration management view and its columns. It contains the following sections.

- MGMT$ECM_CMP_JOBS

- MGMT$ECM_CMP_JOB_LAST_RESULTS

- MGMT$ECM_CMP_RPT_CCS_DS

- MGMT$ECM_CMP_RPT_CCS_DS_DTLS

- MGMT$ECM_CMP_RPT_CCS_PD_ALL

- MGMT$ECM_CMP_RPT_CCS_PD_DIFFS

- MGMT$ECM_CMP_RPT_CI_DIFFS

- MGMT$ECM_CMP_VISIBLE_CONFIGS

- MGMT$ECM_CURRENT_SNAPSHOTS

- MGMT$ECM_VISIBLE_SNAPSHOTS

5.4.1 MGMT$ECM_CMP_JOBS

The MGMT$ECM_CMP_JOBS view enables you to view all comparison jobs for a first target, second target combination. More than one result might be returned for a set of targets, if different templates or save modes were specified for the comparison. All jobs are returned (succeeded, failed, running, scheduled, and so on).

Table 5-29 MGMT$ECM_CMP_JOBS

Column

Description

JOB_NAME

The name of the job with the most recent successful results.

JOB_DESC

The description of the job.

JOB_OWNER

The owner of the job.

SCHEDULED_TIME

The time for when the job was scheduled.

COMPARE_TIME

The time when the comparison began.

JOB_STATUS

The status of the overall job.

STEP_STATUS

The status of this particular target comparison.

TARGET_TYPE

The target type of the targets specified for this comparison.

DISPLAY_TYPE

The display name of the target type (in English).

ME_CLASS

The Management Entity (ME) class of the root target type, such as system, group, target, and so on

FIRST_TARGET

The name of the first target specified for this comparison.

FIRST_CONFIG_TYPE

The type of the first configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

SECOND_TARGET

The name of the second target specified for this comparison.

SECOND_CONFIG_TYPE

The type of the second configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

TEMPLATE_NAME

The name of the template used by this comparison. This column returns NULL if no template was used.

SAVE_MODE

The Save mode used for this comparison.

Possible values:

- All: Saves all content

- Diffs Only: Saves differences only

COMPARISON_ID

The ID of the comparison.

COMP_RESULT_ID

The ID of this comparison result.

COMP_CONFIG_RESULT_ID

The ID for this specific root target comparison results (as opposed to member target result IDs).

JOB_ID

The ID of the job.

JOB_EXECUTION_ID

The ID of the job execution.

DIFF_COUNT

The total number of all differences associated with this target and all member targets.

5.4.2 MGMT$ECM_CMP_JOB_LAST_RESULTS

The MGMT$ECM_CMP_JOB_LAST_RESULTS view enables you to view the latest valid comparison job results for a first target, second target combination. More than one result might be returned for a set of targets, if different templates or save modes were specified for the comparison. Successful job results are returned only.

Table 5-30 MGMT$ECM_CMP_JOB_LAST_RESULTS

Column

Description

JOB_NAME

The name of the job with the most recent successful results.

JOB_OWNER

The owner of the job.

JOB_SCHEDULED_DATE

The time for when the job was scheduled.

COMPARE_TIME

The time when the comparison began.

JOB_STATUS

The status of the overall job. For this view, the status is SUCCEEDED always.

TARGET_TYPE

The target type of the targets specified for this comparison.

DISPLAY_TYPE

The default display name of the target type (in English).

ME_CLASS

The ME class of the target type, such as system, group, target, and so on

FIRST_TARGET

The name of the first target specified for this comparison.

FIRST_CONFIG_TYPE

The type of the first configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

SECOND_TARGET

The name of the second target specified for this comparison.

SECOND_CONFIG_TYPE

The type of the second configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

TEMPLATE_NAME

The name of the template used by this comparison. This column returns NULL if no template was used.

SAVE_MODE

The Save mode used for this comparison.

Possible values:

- All: Saves all content

- Diffs Only: Saves differences only

COMPARISON_ID

The ID of the comparison.

COMP_RESULT_ID

The ID of this comparison result.

COMP_CONFIG_RESULT_ID

The ID for this specific root target comparison results (as opposed to member target result IDs).

JOB_ID

The ID of the job.

JOB_EXECUTION_ID

The ID of the job execution.

DIFF_COUNT

The total number of all differences associated with this target and all member targets.

HAS_DIFFS

Indicates whether a non CCS configuration item has differences.

HAS_CCS_ATTR_DIFFS

Indicates whether a CCS file has attribute differences.

HAS_CCS_PARSED_DIFFS

Indicates if a CCS file is parsed and if the parsed rows are different

5.4.3 MGMT$ECM_CMP_RPT_CCS_DS

The MGMT$ECM_CMP_RPT_CCS_DS view enables you to view all compared CCS data source information.

Table 5-31 MGMT$ECM_CMP_RPT_CCS_DS

Column

Description

COMP_RESULT_ID

The comparison result ID represents a root target comparison.

ROOT_COMP_CONFIG_RESULT_ID

The root comparison result ID represents a single target to target comparison.

COMP_CONFIG_RESULT_ID

The comparison configuration result ID represents a target to target comparison (root or member target). This can be the same as the ROOT_COMP_CONFIG_RESULT_ID.

METADATA_ID

The snapshot metadata ID.

COMP_DELTA_SNAP_ID

The compare ID for the snapshot.

SNAPSHOT_TYPE

The type of snapshot.

DISPLAY_SNAPSHOT

The default snapshot display name (in English).

CONFIG_ITEM

The configuration item for the CCS data source information.

CCS_DS_ATTR_DIFF_TYPE

The file difference type.

Possible values:

- FIRST_ONLY: Indicates the file is on the first target only.

- SECOND_ONLY: Indicates the file is on the second target only.

- DIFFERENT: Indicates the file is different between the two targets.

- SAME: Indicates the file is the same on both targets.

COMP_DELTA_ENTRY_SNAP_ID

The snapshot ID associated with this data source entry.

COMP_DELTA_ENTRY_ID

The comparison delta entry ID for the data source.

CCS_DS

The CCS data source name.

ROOT_TARGET_TYPE

The root target type.

ROOT_DISPLAY_TYPE

The default display name (in English) of the root target type.

ROOT_ME_CLASS

The ME class of the root target type, such as system, group, target, and so on.

TARGET_TYPE

The target type of the compared targets. This could be the same as the root target type.

DISPLAY_TYPE

The default display name (in English) of the compared target type.

ME_CLASS

The ME class of the compared target type, such as system, group, target, and so on.

ROOT_FIRST_TARGET

The root target for the first compared target.

FIRST_TARGET

The first target in the comparison. This can be the same as the root first target.

FIRST_CONFIG_TYPE

The type of the first configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

ROOT_SECOND_TARGET

The root target for the first compared target.

SECOND_TARGET

The first target in the comparison. This can be the same as the root first target.

SECOND_CONFIG_TYPE

The type of the first configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

5.4.4 MGMT$ECM_CMP_RPT_CCS_DS_DTLS

The MGMT$ECM_CMP_RPT_CCS_DS_DTLS view enables you to view all comparison CCS data source detail information.

Table 5-32 MGMT$ECM_CMP_RPT_CCS_DS_DTLS

Column

Description

COMP_RESULT_ID

The comparison result ID represents a root target comparison.

ROOT_COMP_CONFIG_RESULT_ID

The root comparison configuration result ID represents a target to target comparison.

COMP_CONFIG_RESULT_ID

The comparison configuration result ID represents a target to target comparison (either root or member target). This can be the same as ROOT_COMP_CONFIG_RESULT_ID.

METADATA_ID

The snapshot metadata ID.

COMP_DELTA_SNAP_ID

The comparison ID for the snapshot.

SNAPSHOT_TYPE

The type of snapshot.

DISPLAY_SNAPSHOT

The default snapshot display name (in English).

CONFIG_ITEM

The configuration item for CCS-parsed data information.

CCS_DS_ATTR_DIFF_TYPE

The comparison delta entry ID for the parsed data.

ATTR_DIFF_TYPE

From the UI, the parsed data is shown in a tree. In this case, it shows the tree nodes in a delimited list.

COMP_DELTA_ENTRY_ID

The attribute with a value that differs between the two targets.

CCS_DS

Order by this value to see the file content ordered by the tree node.

HAS_PARSED_DATA

Indicates if the CCS data source has parsed data.

HAS_PARSED_DIFFS

Indicates if the CCS data source parsed data has differences.

ROOT_TARGET_TYPE

The root target type.

ROOT_DISPLAY_TYPE

The default display name (in English) of the root target type.

ROOT_ME_CLASS

The ME class of the root target type, such as system, group, target, and so on.

TARGET_TYPE

The target type of the compared targets. This could be the same as the root target type.

DISPLAY_TYPE

The default display name (in English) of the compared target type.

ME_CLASS

The ME class of the compared target type, such as system, group, target, and so on.

ATTR_COL_ORDER

The name of the data source attribute.

DISPLAY_ATTR_COL_NAME

The default display name (in English) for the attribute name.

COLUMN_TYPE

The attribute column type.

ROOT_FIRST_TARGET

The root target for the first compared target

FIRST_TARGET

The first target in the comparison. This can be the same as the root first target.

FIRST_CONFIG_TYPE

The type of the first configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

FIRST_ATTR_VALUE

The value of the attribute on the first target.

ROOT_SECOND_TARGET

The root target for the second compared target.

SECOND_TARGET

The second target in the comparison. This can be the same as the root second target.

SECOND_CONFIG_TYPE

The type of the second configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

SECOND_ATTR_VALUE

The value of the attribute on the second target.

5.4.5 MGMT$ECM_CMP_RPT_CCS_PD_ALL

The MGMT$ECM_CMP_RPT_CCS_PD_ALL view enables you to view all compared CCS-parsed data available from the comparison.

Table 5-33 MGMT$ECM_CMP_RPT_CCS_PD_ALL

Column

Description

CCS_DS_ATTR_DIFF_TYPE

The type of file attribute differences:

Possible values:

- FIRST_ONLY: Indicates a file is present on only one target

- SECOND_ONLY: Indicates a file is present on only one target

- DIFFERENT: Indicates file attributes (such as size) are different

- SAME: Indicates file attributes (such as size) are the same or ignored, but the file content could still vary.

PARSED_DIFF_TYPE

The type of CCS-parsed data difference:

Possible values:

- FIRST_ONLY: Indicates a file is present on only one target

- SECOND_ONLY: Indicates a file is present on only one target

- DIFFERENT: Indicates file attributes (such as size) are different

- SAME: Indicates file attributes (such as size) are the same or ignored, but the file content could still vary.

COMP_RESULT_ID

The comparison result ID represents a root target comparison.

ROOT_COMP_CONFIG_RESULT_ID

The root comparison configuration result ID represents a target to target comparison.

COMP_CONFIG_RESULT_ID

The comparison configuration result ID represents a target to target comparison (either root or member target). This can be the same as ROOT_COMP_CONFIG_RESULT_ID.

METADATA_ID

The snapshot metadata ID.

SNAPSHOT_TYPE

The type of snapshot.

DISPLAY_SNAPSHOT

The snapshot display name (in English).

CCS_DS

The CCS data source.

CONFIG_ITEM

The configuration item for CCS-parsed data information.

COMP_DELTA_ENTRY_ID

The comparison delta entry ID for the parsed data.

PATH

From the UI, the parsed data is shown in a tree. In this case, it shows the tree nodes in a delimited list.

ATTR_COL_NAME

The attribute with a value that differs between the two targets.

PATH_ORDER

Order by this value to see the file content ordered by the tree node.

ATTR_COL_ORDER

Order by this value to see the attribute nodes in the order that they appear in the file.

ROOT_TARGET_TYPE

The root target type.

ROOT_DISPLAY_TYPE

The display name (in English) of the root target type.

ROOT_ME_CLASS

The ME class of the root target type, such as system, group, target, and so on.

TARGET_TYPE

The target type of the compared targets. This could be the same as the root target type.

DISPLAY_TYPE

The display name (in English) of the compared target type.

ME_CLASS

The ME class of the compared target type, such as system, group, target, and so on.

ROOT_FIRST_TARGET

The root target for the first compared target

FIRST_TARGET

The first target in the comparison. This can be the same as the root first target.

FIRST_CONFIG_TYPE

The type of the first configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

FIRST_ATTR_VALUE

The value of the attribute on the first target.

ROOT_SECOND_TARGET

The root target for the second compared target.

SECOND_TARGET

The second target in the comparison. This can be the same as the root second target.

SECOND_CONFIG_TYPE

The type of the second configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

SECOND_ATTR_VALUE

The value of the attribute on the second target.

5.4.6 MGMT$ECM_CMP_RPT_CCS_PD_DIFFS

The MGMT$ECM_CMP_RPT_CCS_PD_DIFFS view enables you to view all comparison CCS-parsed data differences.

A row is returned only if the following applies:

- The data source file must be present on both compared targets

- The data source must have parsed data

- The parsed data row must differ on both compared targets

Table 5-34 MGMT$ECM_CMP_RPT_CCS_PD_DIFFS

Column

Description

CCS_DS_ATTR_DIFF_TYPE

The type of file attribute differences:

Possible values:

- FIRST_ONLY: Indicates a file is present on only one target

- SECOND_ONLY: Indicates a file is present on only one target

- DIFFERENT: Indicates file attributes (such as size) are different

- SAME: Indicates file attributes (such as size) are the same or ignored, but the file content could still vary.

PARSED_DIFF_TYPE

The type of CCS-parsed data difference:

Possible values:

- FIRST_ONLY: Indicates a file is present on only one target

- SECOND_ONLY: Indicates a file is present on only one target

- DIFFERENT: Indicates file attributes (such as size) are different

- SAME: Indicates file attributes (such as size) are the same or ignored, but the file content could still vary.

COMP_RESULT_ID

The comparison result ID represents a root target comparison.

ROOT_COMP_CONFIG_RESULT_ID

The root comparison configuration result ID represents a target to target comparison.

COMP_CONFIG_RESULT_ID

The comparison configuration result ID represents a target to target comparison (either root or member target). This can be the same as ROOT_COMP_CONFIG_RESULT_ID.

METADATA_ID

The snapshot metadata ID.

SNAPSHOT_TYPE

The type of snapshot.

DISPLAY_SNAPSHOT

The snapshot display name (in English).

CCS_DS

The CCS data source.

CONFIG_ITEM

The configuration item for CCS-parsed data information.

COMP_DELTA_ENTRY_ID

The comparison delta entry ID for the parsed data.

PATH

From the UI, the parsed data is shown in a tree. In this case, it shows the tree nodes in a delimited list.

ATTR_COL_NAME

The attribute with a value that differs between the two targets.

PATH_ORDER

Order by this value to see the file content ordered by the tree node.

ATTR_COL_ORDER

Order by this value to see the attribute nodes in the order that they appear in the file.

ROOT_TARGET_TYPE

The root target type.

ROOT_DISPLAY_TYPE

The default English display name of the root target type.

ROOT_ME_CLASS

The ME class of the root target type, such as system, group, target, and so on.

TARGET_TYPE

The target type of the compared targets. This could be the same as the root target type.

DISPLAY_TYPE

The default English display name of the compared target type.

ME_CLASS

The ME class of the compared target type, such as system, group, target, and so on.

ROOT_FIRST_TARGET

The root target for the first compared target

FIRST_TARGET

The first target in the comparison. This can be the same as the root first target.

FIRST_CONFIG_TYPE

The type of the first configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

FIRST_ATTR_VALUE

The value of the attribute on the first target.

ROOT_SECOND_TARGET

The root target for the second compared target.

SECOND_TARGET

The second target in the comparison. This can be the same as the root second target.

SECOND_CONFIG_TYPE

The type of the second configuration.

Possible values:

- Saved: Indicates that a saved configuration was compared

- Latest: Indicates that a target was compared

SECOND_ATTR_VALUE

The value of the attribute on the second target.

5.4.7 MGMT$ECM_CMP_RPT_CI_DIFFS

The MGMT$ECM_CMP_RPT_CI_DIFFS view enables you to view all comparison differences by configuration item.

Table 5-35 MGMT$ECM_CMP_RPT_CI_DIFFS

Column

Description

ROOT_TARGET_TYPE

The root target type of the targets specified for this comparison.

ROOT_DISPLAY_TYPE

The default English display name for the root target type.

ROOT_ME_CLASS

The ME class of the root target type, such as SYSTEM, GROUP, or TARGET.

TARGET_TYPE

The target type of the compared target (this can be the root target or a member target).

DISPLAY_TYPE

The default English display name for the compared target type.

ME_CLASS

The ME class of the compared target.

ROOT_FIRST_TARGET

The root target name of the first target specified for this comparison.

FIRST_TARGET

The compared target name of the first target specified for this comparison (this can be the root target or a member target).

FIRST_CONFIG_TYPE

The configuration type of the first target.

Possible values:

- Latest: Indicates that the target was selected for comparison

- Saved: Indicates that a saved configuration was selected for comparison

ROOT_SECOND_TARGET

The root target name of the second target specified for this compare

SECOND_TARGET

The target name of the second target specified for this comparison.

SECOND_CONFIG_TYPE

The configuration type of the second target.

Possible values:

- Latest: Indicates that the target was selected for comparison

- Saved: Indicates that a saved configuration was selected for comparison

SNAPSHOT_TYPE

The snapshot type with a difference list.

DISPLAY_SNAPSHOT

The English display name for the snapshot type

CONFIG_ITEM

The snapshot configuration item

DISPLAY_CONFIG_ITEM

The English display name for the configuration item

CI_IS_CCS

Indicates whether the item is a CCS configuration item.

Possible values:

- 1: CCS configuration item

- 0: Not a CCS configuration item

TOTAL_CI_DIFFS

The total number of all differences associated with this target and configuration item.

NOTIFY_DIFFS_COUNT

The number of differences with notify flags.

JOB_EXECUTION_ID

The ID of this run of the compare job.

COMPARISON_ID

The ID of the comparison definition.

COMP_RESULT_ID

The ID connection the root target compare, job execution and comparison def

ROOT_COMP_CONFIG_RESULT_ID

The root target comparison configuration result ID.

COMP_CONFIG_RESULT_ID

The compared target comparison configuration result ID.

5.4.8 MGMT$ECM_CMP_VISIBLE_CONFIGS

The MGMT$ECM_CMP_VISIBLE_CONFIGS view provides access to the visible configuration entities used for comparison.

Table 5-36 MGMT$ECM_CMP_VISIBLE_CONFIGS

Column

Description

CONFIG_ENTITY_ID

The ID of the compared target or the saved configuration.

TARGET_TYPE

The target type of the target associated with this configuration entity ID.

DISPLAY_TYPE

The external display name of the target type of the target associated with this configuration entity ID.

CONFIG_TYPE

Specifies the configuration type selected for comparison.

Possible values:

- Latest: Indicates that a target was selected for comparison

- Saved: Indicates that a saved configuration was selected for comparison

TARGET_GUID

Unique identifier of the compared target.

TARGET_NAME

Name of the compared target.

ME_CLASS

ME class of the compared target.

SAVED_CONTAINER_GUID

The saved container snapshot GUID for the compared saved snapshot.

Note: This field returns NULL if a target was compared.

5.4.9 MGMT$ECM_CURRENT_SNAPSHOTS

The MGMT$ECM_CURRENT_SNAPSHOTS view lists all the ECM current configuration snapshots and limits access to the snapshots based on the current logged-in Enterprise Manager user.

Table 5-37 MGMT$ECM_CURRENT_SNAPSHOTS

Column

Description

ECM_SNAPSHOT_ID

Identifies the snapshot. You can use the ECM snapshot ID to join with other ECM views. This is a key column for this view.

SNAPSHOT_TYPE

Specifies the type of snapshot.

START_TIMESTAMP

Specifies the timestamp of the collection (in target time zone).

TARGET_GUID

Unique identifier of the target

TARGET_NAME

Name of the target

TARGET_TYPE

Type of the target.

DISPLAY_TARGET_NAME

Display name of the target

DISPLAY_TARGET_TYPE

Display name of the target type

ELAPSED_TIME

Not used

DESCRIPTION

Description of the snapshot provided by the user

MESSAGE

Not used.

STATUS

Not used.

SAVED_TIMESTAMP

Specifies the time stamp of when the snap shot was saved (in the Oracle Database time zone).

VERSION

Specifies the version of the snapshot metadata.

HOST_NAME

Specifies the name of the host of the target.

LAST_UPLOAD_TIMESTAMP

Specifies the last time (in the Management Repository time zone) when a collection was processed for this snapshot type.

5.4.10 MGMT$ECM_VISIBLE_SNAPSHOTS

The MGMT$ECM_VISIBLE_SNAPSHOTS view lists all the Enterprise Configuration Management (ECM) snapshots visible to the current Enterprise Manager user, including both current and saved snapshots.

Table 5-38 MGMT$ECM_VISIBLE_SNAPSHOTS

Column

Description

ECM_SNAPSHOT_ID

Identifies the snapshot. You can use the snapshot ID to join with other ECM views. This is a key column for this view.

SNAPSHOT_TYPE

Specifies the type of snapshot.

START_TIMESTAMP

Specifies the timestamp of the collection (in target time zone).

TARGET_GUID

Unique identifier of the target

TARGET_NAME

Name of the target

TARGET_TYPE

Type of the target.

DISPLAY_TARGET_NAME

Display name of the target

DISPLAY_TARGET_TYPE

Display name of the target type

ELAPSED_TIME

Not used

DESCRIPTION

Provides a description of the snapshot provided by the user.

IS_CURRENT

Specifies whether the data is current or saved

Possible values:

- Y: Current data

- N: Saved data

MESSAGE

Not used.

STATUS

Not used.

CREATOR

Valid only for saved snapshots. Identifes the Enterprise Manager user who saved the snapshot.

SAVED_TIMESTAMP

Specifies the time stamp of when the snap shot was saved (in the Oracle Database time zone).

VERSION

Specifies the version of the snapshot metadata.

LAST_UPLOAD_TIMESTAMP

Specifies the last time (in the Management Repository time zone) when a collection was processed for this snapshot type.

6 Events Views

This chapter provides a description of each event view and its columns. It contains the following sections:

- MGMT$INCIDENT_CATEGORY

- MGMT$INCIDENT_TARGET

- MGMT$INCIDENT_ANNOTATION

- MGMT$EVENTS_LATEST

- MGMT$EVENTS

- MGMT$EVENT_ANNOTATION

- MGMT$PROBLEMS

- MGMT$PROBLEM_ANNOTATION

For examples of how to use views, see Chapter 20, "Examples".

6.1 MGMT$INCIDENTS

The MGMT$INCIDENTS view provides a view of the attributes of the incident including its summary message. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-1 MGMT$INCIDENTS

Column

Description

INCIDENT_ID

The unique RAW ID of an incident

INCIDENT_NUM

The end-user visible ID of the incident

SUMMARY_MSG

Summary message of the incident

SEVERITY

The severity of the incident

IS_ESCALATED

Specifies whether the issue is escalated.

Possible values:

- 1: Yes

- 0: No

ESCALATION_LEVEL

If the incident is escalated, then this value specifies the escalation level. This value can be between level 1 and level 5.

PRIORITY

The priority level of the incident.

Possible values:

- None

- Urgent

- Very High

- High

- Medium

- Low

RESOLUTION_STATE

The resolution state of the issue.

OWNER

The owner of the issue. If there is no owner, then this value is "-".

IS_ACKNOWLEDGED

Specifies whether the incident is acknowledged.

Possible values:

- 1: Yes

- 0: No

IS_SUPPRESSED

Specifies whether the incident is suppressed.

Possible values:

- 1: Yes

- 0: No

LAST_ANNOTATION_SEQ

The sequence ID of the last annotation entered for this issue

CREATION_DATE

The date the incident was created

LAST_UPDATED_DATE

The date when this incident was updated last

EVENT_COUNT

The number of events associated with this incident

OPEN_STATUS

Specifies the status of the incident.

Possible values:

- 1: Open incidents

- 0: Closed incidents

CLOSED_DATE

The date when the incident is closed (if it is closed)

SRC_COUNT

The number of unique target or source object combinations to which events in this incident belong

TARGET_GUID

The unique ID of a target associated with the incident This value is set only when all the events in the incident belong to the same target or source object combination. It is set to null when the events belong to multiple sources.

SOURCE_OBJ_TYPE

The source object or entity type to which all events in the incident belong (if they all belong to the same target or source object combination). Set to null when the events belong to multiple sources.

ADR_RELATED

Indicates if the incident is a Oracle diagnostic incident.

Possible values:

- 0: No

- 1: Yes

TICKET_ID

Ticket associated with this incident (can be null)

TICKET_STATUS

Status of the ticket associated with this incident (can be null)

SR_ID

ID of the service request associated with this problem (if any)

PROBLEM_ID

The unique RAW ID of the related problem (if any)

PROBLEM_NUM

The end-user visible ID of the related problem (if any)

6.2 MGMT$INCIDENT_CATEGORY

The MGMT$INCIDENT_CATEGORY view is the incident view for the mapping between incidents and categories. An incident can have multiple categories associated with it. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-2 MGMT$INCIDENT_CATEGORY

Column

Description

INCIDENT_ID

The unique RAW ID of an incident

CATEGORY_NAME

Name of the category

OPEN_STATUS

Specifies the status of the incident.

Possible values:

- 1: Open incidents

- 0: Closed incidents

CLOSED_DATE

The date when the incident is closed

6.3 MGMT$INCIDENT_TARGET

The MGMT$INCIDENT_TARGET view is the incident view for the mapping between incidents and targets. An incident can be made of multiple events and these events could be from different targets. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-3 MGMT$INCIDENT_TARGET

Column

Description

INCIDENT_ID

The unique RAW ID of an incident

TARGET_GUID

The unique ID of a target (can be null)

OPEN_STATUS

Specifies the status of the incident.

Possible values:

- 1: Open incidents

- 0: Closed incidents

CLOSED_DATE

The date when the incident is closed

6.4 MGMT$INCIDENT_ANNOTATION

The MGMT$INCIDENT_ANNOTATION view is the view for the mapping between the incidents and annotations. Each incident can have multiple annotations. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-4 MGMT$INCIDENT_ANNOTATION

Column

Description

INCIDENT_ID

The unique RAW ID of an incident

ANNOTATION_SEQ

The order ID in which the annotation is added

ANNOTATION_MSG

The annotation message

ANNOTATION_DATE

The time stamp when the annotation is made

ANNOTATION_TYPE

The type of the annotation, that is, whether it is user or system generated.

Possible values:

- USER

- SYSTEM

ANNOTATION_USER

The user that added the annotation. If the annotation is system-generated, then this value is set to "-" .

OPEN_STATUS

Specifies the status of the incident.

Possible values:

- 1: Open incidents

- 0: Closed incidents

CLOSED_DATE

The date when the incident is closed

6.5 MGMT$EVENTS_LATEST

The MGMT$EVENTS_LATEST view shows the details of the latest state of all events in a given sequence of events. A sequence is a series of raw events that are related to the same source and reporting on the same issue. For example, for a given host, if the CPU utilization goes from warning to critical and then to warning again, then these three events are correlated into a single sequence with three raw events with warning as the latest state. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-5 MGMT$EVENTS_LATEST

Column

Description

EVENT_SEQ_ID

The unique RAW ID of an event sequence

EVENT_ID

The unique RAW ID of the latest event in the sequence

EVENT_CLASS

The event class to which this event belongs

SEVERITY

The severity of the event

LAST_ANNOTATION_SEQ

The sequence ID of the last annotation entered for this sequence

MSG

The event message

EVENT_NAME

The internal event name describing the nature of the events

INCIDENT_ID

The incident ID to which this event belongs (if any)

INCIDENT_NUM

The end-user readable number or ID for the incident

TARGET_GUID

The target GUID to which the events of the sequence belong. If the sequence is not related to any target, then this value is set to NULL.

SOURCE_OBJ_TYPE

The source object or entity type to which the events of the sequence belong. Default value is NULL

SOURCE_OBJ_ID

The source object or entity GUID to which the events of the sequence belong. Default value is NULL

OPEN_STATUS

The status of the event sequence. The event sequence is considered open if the severity of the last event is a non-clear severity.

Possible values:

- 1: Open

- 0: Closed

CLOSED_DATE

The date when the event is marked as closed, that is, when the event sequence is cleared

CREATION_DATE

The date the event sequence was created

LAST_UPDATED_DATE

The date when this event sequence was last updated

6.6 MGMT$EVENTS

The MGMT$EVENTS view shows the details of all the raw events in a given sequence of events. A sequence is a series of raw events that are related to the same source and reporting on the same issue. For example, for a given host, if the CPU utilization goes from warning to critical and then to warning again, then these three events are correlated into a single sequence with three raw events with warning as the latest state. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-6 MGMT$EVENTS

Column

Description

EVENT_SEQ_ID

The unique RAW ID of the event sequence

EVENT_ID

The unique RAW ID of the event

SIGNATURE_ID

The ID of the unique signature of raw events that is used to correlate all raw events to a sequence

EVENT_CLASS

The event class to which this event belongs

SEVERITY

The severity of the raw event

LAST_ANNOTATION_SEQ

The sequence ID of the last annotation entered for this sequence

MSG

The event message

EVENT_NAME

The internal event name describing the nature of the events

INCIDENT_ID

The incident ID to which this event belongs (if applicable)

INCIDENT_NUM

The end-user readable number or ID for the incident

TARGET_GUID

The target GUID to which the event belongs. If the sequence is not related to any target, then this value is set to NULL.

SOURCE_OBJ_TYPE

The source object or entity type to which the event belongs. Default value is NULL

SOURCE_OBJ_ID

The source object or entity GUID to which the event belongs. Default value is NULL

OPEN_STATUS

The status of the event sequence. The event sequence is considered open if the severity of the last event is a non-clear severity.

Possible values:

- 1: Open

- 0: Closed

CLOSED_DATE

The date when the event is marked as closed, that is, when the event sequence is cleared

REPORTED_DATE

The date when the event was reported

6.7 MGMT$EVENT_ANNOTATION

The MGMT$EVENT_ANNOTATION view is the view for the mapping between events and annotations. Each event can have multiple annotations. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Note:
Annotations are associated with the sequence and not with the individual raw events

Table 6-7 MGMT$EVENT_ANNOTATION

Column

Description

EVENT_SEQ_ID

The unique RAW ID of an event sequence

EVENT_INSTANCE_ID

The unique RAW ID of an event instance

ANNOTATION_SEQ_NUM

The order ID in which the annotations is added

ANNOTATION_DATE

The time stamp when the annotation is made

ANNOTATION_TYPE

The type of the annotation, that is, whether it is user or system generated.

Possible values:

- USER

- SYSTEM

ANNOTATION_USER

The user which added the annotation

ANNOTATION_MSG

The annotation message

OPEN_STATUS

The status of the event sequence. The event sequence is considered open if the severity of the last event is a non-clear severity.

Possible values:

- 1: Open

- 0: Closed

CLOSED_DATE

The date when the event is marked as closed, that is, when the event sequence is cleared

6.8 MGMT$PROBLEMS

The MGMT$PROBLEMS view provides a view of the attributes of the problem including its summary message. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-8 MGMT$PROBLEMS

Column

Description

PROBLEM_ID

The unique RAW ID of the problem

PROBLEM_NUM

The end-user visible ID of the problem

SUMMARY_MSG

Summary message of the problem

SEVERITY

The severity of the problem

IS_ESCALATED

Specifies whether the issue is escalated.

Possible values:

- 1: Yes

- 0: No

ESCALATION_LEVEL

If the problem is escalated, then this value specifies the escalation level. This value can be between level 1 and level 5.

PRIORITY

The priority level of the incident.

Possible values:

- None

- Urgent

- Very High

- High

- Medium

- Low

RESOLUTION_STATE

The resolution state of the issue

OWNER

The owner of the issue. If there is no owner, then this value is "-".

IS_ACKNOWLEDGED

Specifies whether the problem is acknowledged.

Possible values:

- 1: Yes

- 0: No

IS_SUPPRESSED

Specifies whether the problem is suppressed.

Possible values:

- 1: Yes

- 0: No

LAST_ANNOTATION_SEQ

The sequence ID of the last annotation entered for this issue

CREATION_DATE

The date the problem was created

LAST_UPDATED_DATE

The date when this problem was updated last

INC_COUNT

The number of incidents associated with this problem

OPEN_STATUS

Specifies the status of the problem.

Possible values:

- 1: Open

- 0: Closed

CLOSED_DATE

The date when the problem is closed (if it is closed)

TARGET_GUID

The unique ID of a target (can be null). This value is set only when all the incidents in the problem belong to the same target or source object combination.

It is set to null when the incidents belong to multiple sources.

Note: For this release, problems can be associated with a single target only

PROBLEM_KEY

Unique signature of this problem

SR_ID

ID of the service request associated with this problem, if any

BUG_ID

ID of the bug associated with this problem, if any

6.9 MGMT$PROBLEM_ANNOTATION

The MGMT$PROBLEM_ANNOTATION view is the view for the mapping between problems and annotations. Each problem can have multiple annotations. Ensure that any query against this view uses filtering on appropriate fields with OPEN_STATUS and CLOSED_DATE being the first to take advantage of partitions.

Table 6-9 MGMT$PROBLEM_ANNOTATION

Column

Description

PROBLEM_ID

The unique RAW ID of a problem

ANNOTATION_SEQ

The order ID in which the annotations is added

ANNOTATION_MSG

The annotation message

ANNOTATION_DATE

The time stamp when the annotation is made

ANNOTATION_TYPE

The type of the annotation, either user or system generated. Valid values are 'USER' or 'SYSTEM'

ANNOTATION_USER

The user which added the annotation

OPEN_STATUS

Specifies the status of the problem.

Possible values:

- 1: Open

- 0: Closed

CLOSED_DATE

The date when the problem is closed

7 Hardware Views

This chapter provides a description of each hardware view and its columns. It contains the following sections:

- Hardware Views

- Service Tag Views

For examples of how to use views, see Chapter 20, "Examples".

7.1 Hardware Views

This chapter provides a description of each hardware view and its columns

7.1.1 MGMT$HW_CPU_DETAILS

The MGMT$HW_CPU_DETAILS view returns a summary of hardware CPU details.

Table 7-1 MGMT$HW_CPU_DETAILS

Column

Description

TARGET_TYPE

Type of target for this metric

TARGET_NAME

The name of the target

VENDOR_NAME

The name of the hardware vendor

FREQUENCY_IN_MHZ

The frequency measured in MHz

ECACHE_IN_MB

The size of the ecache measured in MB

IMPL

The details of the implementation

REVISION

The revision details

MASK

The mask details

INSTANCE_COUNT

This is a count of the CPU devices

NUM_CORES

The number of cores per physical CPU

IS_HYPERTHREAD_ENABLED

Defines whether hyperthreading is enabled for this physical CPU (set to 0 or 1)

SIBLINGS

Total number of logical processors for this physical CPU

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_GUID

The globally unique identifier of the target

LAST_COLLECTION_TIMESTAMP

The date-time of the last collection

7.1.2 MGMT$HW_NIC

The MGMT$HW_NIC view returns a summary of hardware network interface card (NIC) information.

Table 7-2 MGMT$HW_NIC

Column

Description

TARGET_TYPE

Type of target for this metric

TARGET_NAME

The name of the target

HOST_NAME

The name of the host

NAME

The NIC name

INET_ADDRESS

The NIC address

MAX_TRANSFER_UNIT

The NIC maximum transfer unit

BROADCAST_ADDRESS

The NIC broadcast address

FLAGS

The NIC flags

MASK

The NIC masks

MAC_ADDRESS

The NIC MAC address

MAC_ADDRESS_STD

The STD NIC MAC address

DHCP_ENABLED

Defines whether DHCP is enabled (set to Y or N)

HOST_ALIASES

The NIC host aliases

INET6_ADDRESSES

The Ipv6 addresses of the host

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_GUID

The globally unique identifier of the target

LAST_COLLECTION_TIMESTAMP

The date-time of the last collection

IS_PHYSICAL

Defines whether the NIC is physical or not (set to 0 or 1)

7.1.3 MGMT$HW_NIC_BONDS

The MGMT$HW_NIC_BONDS view returns a summary of hardware network interface card (NIC) bonds information.

Table 7-3 MGMT$HW_NIC_BONDS

Column

Description

TARGET_TYPE

Type of target for this metric

TARGET_NAME

The name of the target

BOND_NAME

The name of the bond

PRIMARY_SLAVE

The primary slave of the bond

SECONDARY_SLAVES

The secondary slaves of the bond

BOND_MODE

The mode of the bond, for example, Balanced

OPTIONS

The options used when the bond is created

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_GUID

The globally unique identifier of the target

LAST_COLLECTION_TIMESTAMP

The date-time of the last collection

7.1.4 MGMT$HW_IO_DEVICES

The MGMT$HW_IO_DEVICES view returns a summary of IO device details.

Table 7-4 MGMT$HW_IO_DEVICES

Column

Description

TARGET_TYPE

Type of target for this metric

TARGET_NAME

The name of the target

VENDOR_NAME

The vendor name

NAME

The name of the IO device

FREQ_IN_MHZ

The frequency in MHz

BUS

The bus type

REVISION

The revision of the IO device

INSTANCE_COUNT

This is a count of the IO devices that have the same vendor name, name, and so on

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_GUID

The globally unique identifier of the target

LAST_COLLECTION_TIMESTAMP

The date-time of the last collection

7.1.5 MGMT$EM_ECM_HOST_VIRTUAL

The MGMT$EM_ECM_HOST_VIRTUAL view returns virtualization properties of the Host targets.

Note:
The MGMT$EM_ECM_HOST_VIRTUAL view is available for release 12.1.0.4 and later only.

Table 7-5 MGMT$EM_ECM_HOST_VIRTUAL

Column

Description

HOST_NAME

Name of the Host target name

TARGET_NAME

Name of the target

TARGET_GUID

Globally unique identifier of the target

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for Host target

NAME

Virtualization Property Name

VALUE

Virtualization Property Value

7.1.6 MGMT$HW_HOSTS_FILE

The MGMT$HW_HOSTS_FILE view returns details of the hosts file (/etc/host) in parsed format.

Note:
The MGMT$HW_HOSTS_FILE view is available for release 12.1.0.4 and later only.

Table 7-6 MGMT$HW_HOSTS_FILE

Column

Description

TARGET_NAME

Name of the target

IP_ADDRESS

IP address

VALUE

Fully qualified domain name, alias, and so on.

SNAPSHOT_GUID

ECM Snapshot ID of the current snapshot for Host target

TARGET_GUID

Globally unique identifier of the target

TARGET_TYPE

Type of target

LAST_COLLECTION_TIMESTAMP

Date-time of the last collection

7.2 Service Tag Views

This section provides a description of each service tag view and its columns. It contains the following sections:

7.2.1 MGMT$SERVICETAG_INSTANCES

The MGMT$SERVICETAG_INSTANCES view provides information about the product ID and instance of the product installed on the server, such as Oracle Solaris Cluster.

Table 7-7 MGMT$SERVICETAG_INSTANCES

Column

Description

PRODUCT_URN

Denotes the product ID for the product installed on the server

INSTANCE_URN

Uniquely identifies the instance of the product installed on that server

7.2.2 MGMT$SERVICETAG_REGISTRY

The MGMT$SERVICETAG_REGISTRY view uniquely identifies the instance of a Service Tag registry on a server and the version of Service Tag software that created it.

Table 7-8 MGMT$SERVICETAG_REGISTRY

Column

Description

AGENT_ID

Uniquely identifies the instance of a Service Tag registry on the server

AGENT_VERSION

Uniquely identifies the version of the Service Tag software

REGISTRY_VERSION

Identifies the version of the registry. This is the registry that Oracle Configuration Manager (OCM) harvests to collect the data for this metric.

8 Inventory Views

This chapter provides a description of each inventory view and its columns. It contains the following sections:

- Inventory Views

- Oracle Home Directory Patching Views

- Oracle Home Directory Views

For examples of how to use views, see Chapter 20, "Examples".

8.1 Inventory Views

This section provides a description of each inventory view and its columns. It contains the following sections:

- MGMT$TARGET

- MGMT$TARGET_TYPE

- MGMT$TARGET_TYPE_DEF

- MGMT$TARGET_ASSOCIATIONS

- MGMT$TARGET_MEMBERS

- MGMT$TARGET_FLAT_MEMBERS

- MGMT$TARGET_TYPE_PROPERTIES

- MGMT$TARGET_PROPERTIES

8.1.1 MGMT$TARGET

The MGMT$TARGET view displays information about the managed targets that are known to the Management Repository. These targets may or may not be actively monitored.

Table 8-1 MGMT$TARGET

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The type of the target. Types of targets may include databases, hosts, web servers, applications, or Application Servers. The definer of the collection definition at the Management Agent defines the target type. The target type defines the set of metrics that are collected for a managed target within the Management Repository.

TARGET_GUID

The unique global identifier for the target.

TYPE_VERSION

The target type meta version of the metadata set. Metadata versions may be updated when applying patches or upon new releases of Enterprise Manager Grid Control.

TYPE_QUALIFIER1-5

Up to five qualifiers can be used to distinguish different metric definitions based on different system configurations. Example qualifier entries might include operating system version, database version, or Oracle RAC configuration.

EMD_URL

The URL address of the Management Agent that is managing the target

TIMEZONE_REGION

The time zone region in which the target operates

DISPLAY_NAME

User-friendly name for the target

HOST_NAME

Name of the host where the target is running. For composite targets or targets that span a host, this column will be NULL.

LAST_METRIC_LOAD_TIME

Timestamp when information for this target was last loaded into the Management Repository. If metrics have not been loaded into the Management Repository for the target, this column will be NULL.

TYPE_DISPLAY_NAME

User-friendly name of the target type

Usage Notes

- Display a list of the targets known to the Management Repository.

- Display administration and monitoring information in the context of a managed target.

- Order the targets by last load time for customers to get a sense on how recent the information is for a target in the Management Repository. To access this information in an ordered way, customers should use the appropriate ORDER BY clause with the view.

- Access to this view will use an index if the query references the target name and target type.

- There is an implicit assumption that customers will not use this view to identify the targets that are owned by a Management Agent or the targets that reside on a specific host.

8.1.2 MGMT$TARGET_TYPE

The MGMT$TARGET_TYPE view displays metric descriptions for a given target name and target type. This information is available for the metrics for the managed targets that have been loaded into the Management Repository. Metrics are specific to the target type.

Table 8-2 MGMT$TARGET_TYPE

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

TYPE_VERSION

The target type meta version of the metadata set. Metadata versions may be updated when applying patches or upon new releases of Enterprise Manager Grid Control.

TYPE_QUALIFIER1-5

Up to five qualifiers can be used to distinguish different metric definitions based on different system configurations. Example qualifier entries may include operating system version, database version, or Oracle RAC configuration.

METRIC_NAME

The name of the metric that is being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.

For example, if a table describing the MGMT$TARGET_TYPE view is to be defined as a table metric, Column Name, Data Type, and Description would be metric columns.

KEY_COLUMN

For table metrics, the key column contains the name of the column in the table that represents the primary key. Values in this column must uniquely identify rows in the table. If the metric that is being defined is not a table metric, the value in this column is a single space;

For example, the Column Name would be the key column if this table describing the MGMT$TARGET_TYPE view was being defined as a table metric.

METRIC_TYPE

A DECODE of the internal numeric type of the metric that is being defined. This column will contain one of the following values:

- Number

- String

- Table

- Raw

- External

- Repository Metric

METRIC_LABEL

A intuitive display name for the metric that is being defined

COLUMN_LABEL

For table metrics, the column label contains a user understandable display name for the metric column

DESCRIPTION

A description of the metric that is being defined

DESCRIPTION_NLSID

The NLSid of the description of the metric

UNIT

The unit of the metric that is being defined

UNIT_NLSID

The NLSid of the unit of the metric being defined

SHORT_NAME

This is a shortened version of the metric display name for the "dense" UI concept

SHORT_NAME_NLSID

The NLSid of the short name of the metric being defined

Usage Notes

- List the set of metrics that have been defined for a target type.

- Display intuitive metric names and associated attributes such as unit in a general way during portal, web application, or custom 4GL report generation.

- Access to this view will use an index if the query references the metric name, metric column. The query should also qualify the target name and target type in order to restrict the amount of information returned.

8.1.3 MGMT$TARGET_TYPE_DEF

The MGMT$TARGET_TYPE_DEF view displays definition information for a target type.

Table 8-3 MGMT$TARGET_TYPE_DEF

Column

Description

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TYPE_DISPLAY_NAME

User-friendly name of the target type

TARGET_TYPE_GUID

The unique global identifier (GUID) of the target type

MAX_TYPE_META_VER

The maximum version of the target type stored in the Management Repository

8.1.4 MGMT$TARGET_ASSOCIATIONS

The MGMT$TARGET_ASSOCIATIONS view displays the various associations between targets. This view can be used to find all types of associations for a given target.

Table 8-4 MGMT$TARGET_ASSOCIATIONS

Column

Description

ASSOC_DEF_NAME

Name of the association definition

SOURCE_TARGET_NAME

Target name of the target to which the association is being defined

SOURCE_TARGET_TYPE

The target type of the target for which the association is being defined. ”ANY” can be used to specify that any target type be used.

ASSOC_TARGET_NAME

Target Name of the target which is being associated with the source target

ASSOC_TARGET_TYPE

The target type of the associated target. ”ANY” can be used to specify that any target type be used

SCOPE_TARGET_NAME

The target under whose scope the association is valid

This applies to non-global associations only. For example: A database may be part of a composite target only for a particular service.

SCOPE_TARGET_TYPE

The target type for which the association is valid. This applies to non-global associations only.

ASSOCIATION_TYPE

The type of association

Usage Notes

- Can be used to list the associations defined for a specific target.

- Queries using this view will use an index if either (source_target_name, source_target_type) or (assoc_target_name, assoc_target_type) is specified.

8.1.5 MGMT$TARGET_MEMBERS

The MGMT$TARGET_MEMBERS view displays the list of direct members for a target.

Table 8-5 MGMT$TARGET_MEMBERS

Column

Description

AGGREGATE_TARGET_NAME

Target name of the aggregate target

AGGREGATE_TARGET_TYPE

Target type of the aggregate target

AGGREGATE_TARGET_GUID

Target GUID of the aggregate target

MEMBER_TARGET_NAME

Target name of the member target

MEMBER_TARGET_TYPE

Target type of the member target

MEMBER_TARGET_GUID

Target GUID of the member target

Usage Notes

- Find the members for a aggregate target.

- Find the aggregate targets for which a given target is a direct member.

- Queries, which specify values for (AGGREGATE_TARGET_NAME, AGGREGATE_TARGET_TYPE) or (MEMBER_TARGET_NAME, MEMBER_TARGET_TYPE) will use index.

- Joins using AGGREGATE_TARGET_GUID and MEMBER_TARGET_GUID will be efficient.

8.1.6 MGMT$TARGET_FLAT_MEMBERS

The MGMT$TARGET_FLAT_MEMBERS view displays the list of all direct and indirect members of the target.

Table 8-6 MGMT$TARGET_FLAT_MEMBERS

Column

Description

AGGREGATE_TARGET_NAME

The target name of the aggregate target

AGGREGATE_TARGET_TYPE

The target type of the aggregate target

AGGREGATE_TARGET_GUID

Target GUID of the aggregate target

MEMBER_TARGET_NAME

Target Name of the member target

MEMBER_TARGET_TYPE

Target type of the member target

MEMBER_TARGET_GUID

Target GUID of the member target

Usage Notes

- Find the members for an aggregate target.

- Find the aggregate targets for which a given target is a member either directly or indirectly.

- Queries, which specify values for (AGGREGATE_TARGET_NAME, AGGREGATE_TARGET_TYPE) or (MEMBER_TARGET_NAME, MEMBER_TARGET_TYPE), will use index.

- Joins using AGGREGATE_TARGET_GUID and MEMBER_TARGET_GUID will be the most efficient on this view.

8.1.7 MGMT$TARGET_TYPE_PROPERTIES

The MGMT$TARGET_TYPE_PROPERTIES view displays the default list of properties that are applicable to the target based on the target type to which the target belongs.

Table 8-7 MGMT$TARGET_TYPE_PROPERTIES

Column

Description

TARGET_NAME

Name of the target

TARGET_TYPE

Name of the target type

PROPERTY_NAME

Name of the property, such as is_aggregate, is_service, IsBaselineable

PROPERTY_VALUE

Value of the property

Usage Notes

List the properties applicable to the target and the default values.

8.1.8 MGMT$TARGET_PROPERTIES

The MGMT$TARGET_PROPERTIES view displays detailed target properties.

Table 8-8 MGMT$TARGET_PROPERTIES

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

PROPERTY_NAME

The name of the target property being defined

PROPERTY_VALUE

The value of the target property being defined

PROPERTY_TYPE

The type of the target property being defined. Possible values are:

INSTANCE, if the property is applicable to the target instance.

DYNAMIC, if the property is calculated dynamically.

8.2 Oracle Home Directory Patching Views

This section provides a description of each Oracle home directory patching view. It includes the following sections:

- MGMT$EM_HOMES_PLATFORM

- MGMT$APPL_PATCH_AND_PATCHSET

- MGMT$HOMES_AFFECTED

- MGMT$APPLIED_PATCHES

- MGMT$APPLIED_PATCHSETS

8.2.1 MGMT$EM_HOMES_PLATFORM

The MGMT$EM_HOMES_PLATFORM view displays the platform information about the home directories. If the home directory does not have an ARU platform ID, then the platform of the Operating System is considered as the platform of the home directory.

Table 8-9 MGMT$EM_HOMES_PLATFORM

Column

Description

HOME_ID

Unique ID for the home directory

PLATFORM_ID

If the home directory has an ARU platform it is used, otherwise the platform ID of the host is picked

PLATFORM

The platform corresponding to the platform_id

8.2.2 MGMT$APPL_PATCH_AND_PATCHSET

The MGMT$APPL_PATCH_AND_PATCHSET view displays the list of interim patches and patchsets that are applicable to the home directories.

Table 8-10 MGMT$APPL_PATCH_AND_PATCHSET

Column

Description

PATCH_ID

The patch ID

TYPE

Patch or patchset

PRODUCT

The product pertaining to the patch

PATCH_RELEASE

Release version

PLATFORM

Platform on which patch is applicable

ADVISORY

The alert name

HOST_NAME

Host name

HOME_LOCATION

Home directory location

PATCH_GUID

Unique ID for the patch or patchset

TARGET_GUID

Unique ID for the target

8.2.3 MGMT$HOMES_AFFECTED

The MGMT$HOMES_AFFECTED view displays the list of home directories, vulnerable to bugs, which are fixed by the critical patches released. The number of alerts which are applicable to the home directory are calculated.

Table 8-11 MGMT$HOMES_AFFECTED

Column

Description

HOST

Host name

HOME_DIRECTORY

Home directory location

TARGET_GUID

Unique ID for target

ALERTS

Number of alerts for this home directory

8.2.4 MGMT$APPLIED_PATCHES

The MGMT$APPLIED_PATCHES view displays the list of patches that have been applied on the home directories along with the installation time. Each patch can fix more than one bug. The bugs are listed in a comma-separated string.

Table 8-12 MGMT$APPLIED_PATCHES

Column

Description

PATCH

Patch name

BUGS

The bugs fixed by this patch

INSTALLATION_TIME

Time of installation (time zone of the target)

HOST

Host name

HOME_LOCATION

Home location

HOME_NAME

Name of the home

CONTAINER_GUID

Name of the home

TARGET_GUID

Unique ID for target

8.2.5 MGMT$APPLIED_PATCHSETS

The MGMT$APPLIED_PATCHSETS view displays the list of patchsets that have been applied on the home directories along with the installation time.

Table 8-13 MGMT$APPLIED_PATCHSETS

Column

Description

VERSION

The version to which the home will get upgraded to when this patchset is applied

NAME

Patchset external name

TIMESTAMP

Time of Installation (time zone of the target)

HOST

Host name

HOME_LOCATION

Home location

HOME_NAME

Name of the home directory

CONTAINER_GUID

Name of the home directory

TARGET_GUID

Unique ID for target

8.3 Oracle Home Directory Views

This section provides a description of each Oracle home directory view and its columns. It includes the following sections:

- MGMT$OH_HOME_INFO

- MGMT$OH_DEP_HOMES

- MGMT$OH_CRS_NODES

- MGMT$OH_CLONE_PROPERTIES

- MGMT$OH_COMPONENT

- MGMT$OH_COMP_INST_TYPE

- MGMT$OH_COMP_DEP_RULE

- MGMT$OH_PATCHSET

- MGMT$OH_VERSIONED_PATCH

- MGMT$OH_PATCH

- MGMT$OH_PATCHED_COMPONENT

- MGMT$OH_PATCH_FIXED_BUG

- MGMT$OH_PATCHED_FILE

- MGMT$OH_FILE

- MGMT$PA_RECOM_METRIC_SOURCE

- MGMT$OH_INV_SUMMARY

- MGMT$OH_INSTALLED_TARGETS

8.3.1 MGMT$OH_HOME_INFO

The MGMT$OH_HOME_INFO view contains properties of the Oracle home targets.

Table 8-14 MGMT$OH_HOME_INFO

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for Oracle home target

TARGET_NAME

Name of Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home directory is installed

EMD_URL

EMD_URL of the agent monitoring this Oracle home target

HOME_LOCATION

Complete path to the Oracle home directory

OUI_HOME_NAME

OUI home name

OUI_HOME_GUID

OUI Oracle home globally unique identifier. This is unique across all Oracle product installations.

HOME_TYPE

Type of the HOME ('O' [OUI] or 'W' [WebLogic])

HOME_POINTER

OUI Central Inventory/ Composite Home / BEA Home that contains this home

IS_CLONABLE

Is this home clonable? [0/1]

IS_CRS

Is it a Cluster Ready Services (CRS) home [0/1]

ARU_ID

ARU Platform ID of the Oracle home directory

OUI_PLATFORM_ID

OUI Platform ID of the host

HOME_SIZE

Size of the Oracle home directory (in KBytes)

HOME_RW_STATUS

Read write status of home[NRNW/RO/WO/RW]

ORACLE_BASE

Oracle Base (for OUI homes only)

OH_OWNER_ID

Oracle home owner ID

OH_OWNER

Oracle home owner

OH_GROUP_ID

Oracle home group ID

OH_GROUP

Oracle home group

OH_OWNER_GROUPS_ID

Semi colon separated list of groups IDs to which the Oracle home owner belong

OH_OWNER_GROUPS

Semi colon separated list of groups to which the Oracle home owner belongs

8.3.2 MGMT$OH_DEP_HOMES

The MGMT$OH_DEP_HOMES view contains information about other homes on which an Oracle home depends.

Table 8-15 MGMT$OH_DEP_HOMES

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for Oracle home target

TARGET_NAME

Name of Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

DEP_HOME_LOCATION

Install location of dependee home

8.3.3 MGMT$OH_CRS_NODES

The MGMT$OH_CRS_NODES view contains information about member nodes of a CRS Oracle home.

Table 8-16 MGMT$OH_CRS_NODES

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for Oracle home target

TARGET_NAME

Name of Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

NODE

Node host name

8.3.4 MGMT$OH_CLONE_PROPERTIES

The MGMT$OH_CLONE_PROPERTIES view contains information about clone properties of an Oracle home.

Table 8-17 MGMT$OH_CLONE_PROPERTIES

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

PROPERTY_NAME

Clone property name

PROPERTY_VALUE

Property value

8.3.5 MGMT$OH_COMPONENT

The MGMT$OH_COMPONENT view contains information about components installed in an Oracle home.

Table 8-18 MGMT$OH_COMPONENT

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle Home

HOME_NAME

OUI home name

COMPONENT_NAME

Component name

VERSION

Current version of component

BASE_VERSION

Component base version

INSTALL_TIME

Installation time of component

IS_TOP_LEVEL

Is it a top level component [0/1]

EXTERNAL_NAME

External name of the component

DESCRIPTION

A brief description of the component

LANGUAGES

Languages supported by this component installation

INSTALLED_LOCATION

Component install location

INSTALLER_VERSION

Installer version

MIN_DEINSTALLER_VERSION

Minimum OUI version required to deinstall this component

8.3.6 MGMT$OH_COMP_INST_TYPE

The MGMT$OH_COMP_INST_TYPE view contains Install Type information about components installed in an Oracle home directory.

Table 8-19 MGMT$OH_COMP_INST_TYPE

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

COMPONENT_NAME

Component name

COMPONENT_VERSION

Component base version

NAME_ID

Install type name ID

INSTALL_TYPE_NAME

Install type name

DESC_ID

Install type desc ID

8.3.7 MGMT$OH_COMP_DEP_RULE

The MGMT$OH_COMP_DEP_RULE view contains information about a dependency relationship between components installed in an Oracle home.

Table 8-20 MGMT$OH_COMP_DEP_RULE

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

COMPONENT_NAME

Component name

COMPONENT_VERSION

Component base version

DEPENDEE_NAME

Dependee component name

DEPENDEE_VERSION

Dependee component version

DEPENDEE_HOME_GUID

Oracle home dependee component globally unique identifier

8.3.8 MGMT$OH_PATCHSET

The MGMT$OH_PATCHSET view contains information about patchsets applied on an Oracle home directory.

Table 8-21 MGMT$OH_PATCHSET

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

PATCHSET_NAME

Patchset name

PATCHSET_VERSION

Patchset version

INSTALL_TIME

Installation time of patchset

EXTERNAL_NAME

External name of the patchset

DESCRIPTION

A brief description of the patchset

INV_LOCATION

Patchset inventory location

INSTALLER_VERSION

Installer version

MIN_DEINSTALLER_VERSION

Minimum OUI version required to deinstall this patchset

8.3.9 MGMT$OH_VERSIONED_PATCH

The MGMT$OH_VERSIONED_PATCH view contains information about versioned patches applied on an Oracle home directory.

Table 8-22 MGMT$OH_VERSIONED_PATCH

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

VPATCH_NAME

Versioned patch name (should be same as the component name, on which the versioned patch is applied)

VPATCH_VERSION

Versioned patch version

BASE_COMP_VERSION

Base component version, on which the versioned patch is applied

PATCHSET_NAME

Name of the patchset this versioned patch is part of

PATCHSET_VERSION

Version of the patchset this versioned patch is part of

INSTALL_TIME

Installation time of the versioned patch

EXTERNAL_NAME

External name of the versioned patch

DESCRIPTION

A brief description of the versioned patch

LANGUAGES

Languages supported by this versioned patch

INSTALLED_LOCATION

Install location of the versioned patch

INSTALLER_VERSION

Installer version

MIN_DEINSTALLER_VERSION

Minimum OUI version required to remove this versioned patch

8.3.10 MGMT$OH_PATCH

The MGMT$OH_PATCH view contains information about patches applied on an Oracle home directory.

Table 8-23 MGMT$OH_PATCH

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

PATCH_ID

Patch ID (may be same for more than one patches)

PATCH_UPI

Unique patch identifier (putting N/A when not available in metadata)

PATCH_LANG

Patch language

BUGS_FIXED

Comma separated list of bugs fixed by the patch

INSTALL_TIME

Installation time of the patch

IS_ROLLBACKABLE

Can the patch be rolled back? [0/1]

IS_PSU

Is it a PSU? [0/1]

IS_ONLINE_PATCH

Is it an online patch?

PROFILE

Profile used to install the patch (only for WebLogic)

PATCH_TYPE

Patch type

DESCRIPTION

A brief description of the patch

XML_INV_LOCATION

Patch XML inventory location

INSTALLER_VERSION

Installer version of the patch

8.3.11 MGMT$OH_PATCHED_COMPONENT

The MGMT$OH_PATCHED_COMPONENT view contains information about components affected by a patch applied on an Oracle home directory.

Table 8-24 MGMT$OH_PATCHED_COMPONENT

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

PATCH_ID

Patch ID (may be the same for more than one patch)

PATCH_UPI

Unique Patch Identifier (putting N/A when not available in metadata)

PATCH_LANG

Patch language

COMPONENT_NAME

Affected component name

COMPONENT_VERSION

Current version of the affected component

COMPONENT_BASE_VERSION

Base version of the affected component

COMPONENT_EXTERNAL_NAME

External name of the affected component

FROM_VERSION

Version of the affected component before applying PSU

TO_VERSION

Version of the affected component after applying PSU

8.3.12 MGMT$OH_PATCH_FIXED_BUG

The MGMT$OH_PATCH_FIXED_BUG view contains information about bugs fixed by a patch applied on an Oracle home directory.

Table 8-25 MGMT$OH_PATCH_FIXED_BUG

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

PATCH_ID

Patch ID (may be the same for more than one patch)

PATCH_UPI

Unique Patch Identifier (putting N/A when not available in metadata)

PATCH_LANG

Patch language

BUG_NUMBER

Bug number of a bug fixed by a patch

BUG_DESC

Bug description of a bug fixed by a patch

8.3.13 MGMT$OH_PATCHED_FILE

The MGMT$OH_PATCHED_FILE view contains information about the files affected by a patch applied on an Oracle home directory.

Table 8-26 MGMT$OH_PATCHED_FILE

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

PATCH_ID

Patch ID (may be the same for more than one patch)

PATCH_UPI

Unique Patch Identifier (putting N/A when not available in metadata)

PATCH_LANG

Installation time of the patchset

TIMESTAMP

Patch timestamp

FILE_NAME

Name of a patched file

COMP_NAME

Name of the OUI component this file is part of

COMP_VERSION

InstaVersion of the OUI component this file is part of

8.3.14 MGMT$OH_FILE

The MGMT$OH_FILE view contains information about all the files affected by one or more patches applied on an Oracle home directory.

Table 8-27 MGMT$OH_FILE

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

TARGET_NAME

Name of the Oracle home target

TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_NAME

OUI home name

FILE_NAME

Patched file name

LAST_PATCH_ID

Patch ID of the last patch applied on the file

LAST_PATCH_UPI

UPI of the last patch applied on the file

LAST_PATCH_LANG

Language of the last patch applied on the file

LAST_PATCH_TIMESTAMP

Timestamp of the last patch applied on the file

8.3.15 MGMT$PA_RECOM_METRIC_SOURCE

The MGMT$PA_RECOM_METRIC_SOURCE view contains data for the patch recommendations metric source.

Table 8-28 MGMT$PA_RECOM_METRIC_SOURCE

Column

Description

PATCH_GUID

The GUID of the patch

PATCH

The patch number

ABSTRACT

The abstract information of the patch

CLASSIFICATION

The classification information of the patch

PA_TGT_GUID

The GUID of a target which is applicable to the recommended patch

PA_TGT_NAME

The name of a target which is applicable to the recommended patch

PA_TGT_TYPE

The type id of a target, such as 'host' or 'oracle_database'

PA_TGT_TYPE_DISPLAY_NAME

The display name of a target type such as 'Host' or 'Database Instance'

HOST_NAME

The name of a host target which host this target

TARGET_GUID

The GUID of a host target which host this target. It is the target GUID of a policy violation.

8.3.16 MGMT$OH_INV_SUMMARY

The MGMT$OH_INV_SUMMARY view contains summary of Oracle products and corresponding target types.

Table 8-29 MGMT$OH_INV_SUMMARY

Column

Description

ECM_SNAPSHOT_ID

ECM Snapshot ID of the current snapshot for the Oracle home target

OH_TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

COMP_NAME

Component name

COMP_EXTERNAL_NAME

Component external name

COMP_VERSION

Component version

IS_PATCHED

Is this Oracle home patched?[0/1]

MAP_TARGET_TYPE

Map target type

MAP_PROPERTY_NAME

Map property name

MAP_PROPERTY_VALUE

Map property value

8.3.17 MGMT$OH_INSTALLED_TARGETS

The MGMT$OH_INSTALLED_TARGETS view contains summary of targets installed in the Oracle home directories.

Table 8-30 MGMT$OH_PATCHSET

Column

Description

OH_TARGET_NAME

Name of the Oracle home target

OH_TARGET_GUID

Oracle home target globally unique identifier

HOST_NAME

Name of the host on which the Oracle home is installed

HOME_LOCATION

Complete path to the Oracle home

HOME_TYPE

OUI home type

INST_TARGET_NAME

Installed target name

INST_TARGET_TYPE

Installed target type

9 Job Views

A job is a unit of work that you define to automate commonly-run tasks. This chapter provides a description of each job view and its columns. It contains the following sections:

- MGMT$CA_TARGETS

- MGMT$CA_EXECUTIONS

- MGMT$JOBS

- MGMT$JOB_TARGETS

- MGMT$JOB_EXECUTION_HISTORY

- MGMT$JOB_STEP_HISTORY

- MGMT$JOB_ANNOTATIONS

- MGMT$JOB_NOTIFICATION_LOG

For examples of how to use views, see Chapter 20, "Examples".

9.1 MGMT$CA_TARGETS

The MGMT$CA_TARGETS view provides basic information about a Corrective Action (CA).

Table 9-1 MGMT$CA_TARGETS

Column

Description

CA_NAME

Name of the CA

CA_ID

Unique ID of the CA

CA_OWNER

Owner of the CA

CA_DESCRIPTION

Description of the CA

JOB_TYPE

Job type of the CA

TARGET_NAME

Name of the target associated with the CA

TARGET_TYPE

Type of target associated with the CA

TARGET_GUID

Unique ID of the target associated with the CA

IS_BROKEN

Specifies whether the CA is broken

Possible values:

- 1: CA is broken

- 0: CA is not broken

9.2 MGMT$CA_EXECUTIONS

The MGMT$CA_EXECUTIONS view provides a summary of the Corrective Actions (CA) executions along with the status and targets for each execution.

Table 9-2 MGMT$CA_EXECUTIONS

Column

Description

CA_NAME

Name of the CA

CA_OWNER

Owner of the CA

CA_ID

Unique ID of the CA

JOB_TYPE

Job type of the CA

EXECUTION_ID

Execution ID of the CA

SCHEDULED_TIME

Scheduled time for the CA execution

START_TIME

Start time of the CA execution (in Coordinated Universal Time (UTC))

END_TIME

End time of the CA execution (in UTC)

TRIGGERING_SEVERITY

Severity that triggered the CA

TARGET_NAME

Name of the target on which the CA executed

Note: This value can be different from the target with which the CA is associated

TARGET_TYPE

Type of target on which the CA executed

TARGET_GUID

Unique ID of the target on which the CA executed

TIMEZONE_REGION

The time zone region associated with the execution

STATUS

Represents the status of the execution

Possible values:

- Scheduled: The execution is scheduled

- Running: The execution has steps that have ran already or are running currently

- Error: The execution encountered internal errors and terminated

- Failed: Some steps of the execution ran into failures

- Succeeded: The execution ran as expected

- Suspended By User: The user suspended the execution

- Suspended: Agent Unreachable: The execution cannot continue because the Management Agent cannot be contacted

- Stopped: The execution is stopped explicitly

- Suspended on Lock: The execution cannot continue because it is waiting for a logical lock to be obtained

- Suspended on Event: The execution cannot continue because it is waiting for an internal event (such as a Management Agent restart) or a timeout to occur

- Suspended on Blackout: The execution cannot proceed because the target it is supposed to run against is under blackout

- Suspend Pending: The user initiated a suspension of the execution but the execution is still running because some steps cannot be suspended

- Stop Pending: The user initiated a stop of the execution but the execution is waiting for some steps that could not be stopped

- Inactive: This status is not used in the current release

- Queued: The execution is submitted against a queue and there are executions that must complete before this execution can complete

- Waiting: This execution tracks the next schedule compared to the current scheduled, running, or suspended execution

- Skipped: The execution did not start and its corresponding schedule was skipped. The skip could be due to many reasons, such as overshooting the start grace period, previous schedule not completed when the scheduled time of this execution passed, or the OMS is down. These executions have no corresponding steps

- Reassigned: The owner of the job has changed and the new owner has not updated the job to claim ownership.

- Missing Credentials: The execution is blocked waiting for the user to supply target credentials

- Action Required: The execution is blocked waiting for user action

- Suspended on Broken Target: The execution cannot proceed becasue the corresponding target is broken (it has metric collection issues)

STATUS_INTERNAL

Internal status of the execution.

STATUS_CODE

Status code of the execution. The meaning of this column varies depending on the job type and the steps ran for the execution. This code usually maps ot the exit cilde of the step that rolls up the status.

STATUS_BUCKET

The status bucket to which the execution corresponds.

Note: This value can change from one release to another or between patchsets. Oracle recommends that you do not use this value as filtering criteria

STATE_CYCLE

Provides a lifecycle representation of the status of the execution.

Possible values:

- SCHEDULED: The execution has no steps that are executed. All steps corresponding to the execution are either scheduled to be picked up shortly or later in the future

- RUNNING: The execution has at least one step that ran or is running while no steps are blocked waiting for external processing

- SUSPENDED: The execution is blocked and is waiting for external processing or an external event. For example, the user might have suspended the execution or a step of the execution might be waiting for some other system to respond (such as clearing of blackout, or a Management Agent restart). Such an execution cannot proceed until a timeout occurs or the event that the execution is waiting on occurs.

- FINISHED: The execution has reached a terminal status where no further execution is possible. These executions usually cannot be manipulated in any way (except for failed executions that can be retried, but the retry operation creates a new execution, and does not affect the current execution)

9.3 MGMT$JOBS

The MGMT$JOBS view displays information about a job including the job's schedule.

Table 9-3 MGMT$JOBS

Column

Description

JOB_NAME

The unique name for the job

JOB_ID

The unique system identifier for the job

JOB_OWNER

The owner or creator of the job

JOB_DESCRIPTION

Optional text describing the job function

JOB_TYPE

The job type. For example, multi-task, SQL script or OS Command.

TARGET_TYPE

The type of target the job was submitted against. Applies to single-target jobs only

IS_LIBRARY

Indicates whether or not the job is part of the job library

IS_RESTARTABLE

Indicates whether the job can be restarted. ”0” indicates the job is not restartable. ”1” indicates the job is not restartable.

By default, a job is not restartable if the original job owner is deleted and the job is transferred to another administrator.

START_TIME

The scheduled start time. For daily, days of week and days of month schedules, the start_time denotes when the job should start.

END_TIME

For all periodic schedules, the last date (and time) to run the job. For daily, day of week and day of month schedules, only the date portion is used.

TIMEZONE_TYPE

Possible values are:

- 1 - Repository (deprecated)

- 2 - Agent

- 3 - Specified Offset/Region (offset from GMT)

- 4 - Specified Offset/Region (time zone region name)

TIMEZONE_REGION

The specified time zone region

SCHEDULE_TYPE

Possible values are:

- 1 - One Time

- 2 - Interval

- 3 - Daily

- 4 - Weekly

- 5 - Monthly

- 6 - Yearly

INTERVAL

If schedule_type is interval (2), this is the interval at which the job repeats, in minutes

EXECUTION_HOURS

Indicates the time of day at which the job will execute. Hours are specified using the 24-hour format (0 to 23)

EXECUTION_MINUTES

Indicates the time of day at which the job will execute. Minutes are specified as a number between 0 and 59

MONTHS

For days-of-year job schedules, this indicates the ”month” in the schedule

DAYS

For day-of-week/month or day(s) of the week job schedules, this indicates the ”day” of the week/month.

Days-of-week specified as numbers 1 (Sunday) to 7 (Saturday).

Days-of-month specified as numbers 1 to 31.

9.4 MGMT$JOB_TARGETS

The MGMT$JOB_TARGETS view displays the target(s) the job was submitted against.

Table 9-4 MGMT$JOB_TARGETS

Column

Description

JOB_NAME

The unique name for the job

JOB_OWNER

The owner or creator of the job

JOB_ID

Unique id of the submitted job

JOB_TYPE

The job type. For example, multi-task, SQL script or OS Command.

TARGET_NAME

Name of the target the job was submitted against

TARGET_TYPE

The type of target the job was submitted against. Applies to single-target jobs only.

TARGET_GUID

The unique global identifier for the target

9.5 MGMT$JOB_EXECUTION_HISTORY

The MGMT$JOB_EXECUTION_HISTORY view displays a summary of job executions along with their status and targets for each execution.

Table 9-5 MGMT$JOB_EXECUTION_HISTORY

Column

Description

JOB_NAME

The unique name for the job

JOB_OWNER

The owner of the job

JOB_ID

The unique system identifier for the job

JOB_TYPE

The job type. For example, multi-task, SQL script or OS Command.

EXECUTION_ID

The unique execution identifier

SCHEDULED_TIME

The scheduled time of job execution (using the time zone specified by TIMEZONE_REGION)

START_TIME

The actual time (UTC) the job executed

END_TIME

The actual time (UTC) the job ended execution

TARGET_NAME

Name of the target the job was submitted against

TARGET_TYPE

The type of target the job was submitted against. Applies to single-target jobs only.

TARGET_GUID

The unique global identifier for the target

TIMEZONE_REGION

The time zone region specifying to the job execution

STATUS

The current status of the job execution

Valid values:

- Scheduled: The job execution is scheduled

- Running: The job execution had steps that are run already or are running at the moment

- Error: The job execution encountered internal errors and stopped unexpectedly

- Failed: Some of the steps of the job execution failed

- Succeeded: The job execution completed as expected

- Suspended By User: The user suspended the job execution

- Suspended: Agent Unreachable: The job execution cannot continue because it cannot contact the Management Agent

- Stopped: The job execution is stopped

- Suspended on Lock: The job execution cannot proceed because it waiting for a logical lock to be obtained

- Suspended on Event: The job execution cannot proceed because it is waiting for an internal event (such as restarting the Management Agent) or a timeout to occur

- Suspended on Blackout: The job execution cannot proceed because the target that the job is running against is under blackout

- Suspend Pending: The user initiated a suspension but the job execution is still running because some steps could not be suspended

- Stop Pending: The user initiated a stop but the job execution is waiting for some steps that could not be stopped

- Inactive: This status is not used in the current release

- Queued: The job execution is submitted against a queue and there are other jobs that must complete before this job execution can proceed

- Waiting: The job execution tracks the next schedule compared to the current scheduled or running or suspended job execution

- Skipped: The job execution did not start and its corresponding schedule is skipped

- Reassigned: The job owner is changed and the new owner has not updated to job to claim ownership

- Missing Credentials: The job execution is blocked and is waiting for the user to supply target credentials

- Action Required: The job execution is blocked waiting for user action

- Suspended on Broken Target: The job execution cannot proceed because the corresponding target is broken

STATUS_INTERNAL

The internal integer status of the job execution

STATUS_CODE

The status code of the job execution. This integer usually maps to the exit code of the step that rolls up the status.

STATUS_BUCKET

The status bucket to which the execution corresponds

Note: This value can change between patchsets and Oracle recommends that you do not use this value as filtering criteria

STATE_CYCLE

Provides a lifecycle representation of the status of the execution

Valid values:

- SCHEDULED: The execution has no steps that are executed yet

- RUNNING: The execution has at least one step that ran or is running and no steps are blocked

- SUSPENDED: The execution has blocked steps that are waiting for external processing or an external event

- FINISHED: The execution has reached where no further execution is possible

SOURCE_EXECUTION_ID

The execution which was retried and caused this execution (EXECUTION_ID). For executions that are not retried, the SOURCE_EXECUTION_ID is the same as the EXECUTION_ID.

RETRIED

This value is set to 1 if this execution is retried. Otherwise, it is set to 0

9.6 MGMT$JOB_STEP_HISTORY

The MGMT$JOB_STEP_HISTORY view displays step-level details of job executions.

Table 9-6 MGMT$JOB_STEP_HISTORY

Column

Description

JOB_NAME

The unique name for the job

JOB_OWNER

The owner or creator of the job

JOB_ID

The unique system identifier for the job

EXECUTION_ID

The unique execution identifier

STEP_NAME

The name of the job step

START_TIME

The start time (UTC) of the job step

END_TIME

The end time (UTC) of the job step

STATUS

The current status of the job execution

TARGET_NAME

Name of the target the job was submitted against

TARGET_TYPE

The type of target the job was submitted against. Applies to single-target jobs only.

TARGET_GUID

The unique global identifier for the target

OUTPUT

Generated job output

STATUS_INTERNAL

The internal integer status of the job step

STATUS_CODE

The status code of the job execution. This integer usually maps to the exit code of the step that rolls up the status

STEP_ID

The step ID of the job step

STEP_TYPE

The step type of the job step

9.7 MGMT$JOB_ANNOTATIONS

The MGMT$JOB_ANNOTATIONS view displays a summary of annotations for changes in job status.

Table 9-7 MGMT$JOB_ANNOTATIONS

Column

Description

JOB_NAME

The unique name for the job

JOB_OWNER

The owner or creator of the job

JOB_STATUS

The job status. Possible values are as follows:

- 1: Scheduled

- 2: Executing

- 3: Aborted

- 4: Failed

- 5: Completed

- 6: Suspended

- 7: Agent Down

- 8: Stopped

- 9: Suspended/Lock

- 11: Suspended/Blackout

- 13: Suspend Pending

- 15: Queued

- 16: Failed

- 17: Waiting

- 18: Skipped

OCCURRENCE_TIMESTAMP

The time at which the state change occurred

ANNOTATION_MESSAGE

Annotation text

ANNOTATION_TIMESTAMP

The time the annotation was created

ANNOTATED_BY

Enterprise Manager administrator who authored the annotation

9.8 MGMT$JOB_NOTIFICATION_LOG

The MGMT$JOB_NOTIFICATION_LOG view displays details of notification deliveries for changes in job status.

Table 9-8 MGMT$JOB_NOTIFICATION_LOG

Column

Description

JOB_NAME

The unique name for the job

JOB_OWNER

The owner or creator of the job

JOB_STATUS

The job status.

Possible values:

- 1: Scheduled

- 2: Executing

- 3: Aborted

- 4: Failed

- 5: Completed

- 6: Suspended

- 7: Agent Down

- 8: Stopped

- 9: Suspended/Lock

- 11: Suspended/Blackout

- 13: Suspend Pending

- 15: Queued

- 16: Failed

- 17: Waiting

- 18: Skipped

OCCURRENCE_TIMESTAMP

The time at which the state change occurred

DELIVERY_MESSAGE

The message  indicating the success or failure of the notification delivery

DELIVERY_TIMESTAMP

The time at which the log message was created

10 Linux Patching Views

This chapter provides a description of each Linux patching view and its columns. It contains the following sections:

- MGMT$HOSTPATCH_HOSTS

- MGMT$HOSTPATCH_GROUPS

- MGMT$HOSTPATCH_GRP_COMPL_HIST

- MGMT$HOSTPATCH_HOST_COMPL

For examples of how to use views, see Chapter 20, "Examples".

10.1 MGMT$HOSTPATCH_HOSTS

The MGMT$HOSTPATCH_HOSTS view displays information required to generate compliance reports.

Table 10-1 MGMT$HOSTPATCH_HOSTS

Column

Description

HOST_NAME

Host name

GROUP_NAME

The group the host belongs to

OUT_OF_DATE_PACKAGES

Number of Packages which have a newer version available

ROGUE_PACKAGES

The packages that are not supposed to be installed on the host

10.2 MGMT$HOSTPATCH_GROUPS

The MGMT$HOSTPATCH_GROUPS view displays additional information about a group, the maturity level which is set by the administrator and the packages which need the host to be rebooted on application.

Table 10-2 MGMT$HOSTPATCH_GROUPS

Column

Description

GROUP_NAME

The (unique) name of the group

MATURITY_LEVEL

The maturity level of the group. This is set by the administrator.

NEED_REBOOT_PKGS

Comma separated list of packages which need the system to be rebooted on application

10.3 MGMT$HOSTPATCH_GRP_COMPL_HIST

The MGMT$HOSTPATCH_GRP_COMPL_HIST view displays information required to generate compliance history reports.

Table 10-3 MGMT$HOSTPATCH_GRP_COMPL_HIST

Column

Description

GROUP_NAME

Name of the group

TOTAL_HOSTS

Number of hosts in the group

COMPLIANT_HOSTS

Number of compliant hosts in the group

LAST_CHECKED_ON

Date on which this record was collected

10.4 MGMT$HOSTPATCH_HOST_COMPL

The MGMT$HOSTPATCH_HOST_COMPL view displays information required to generate advisory reports.

Table 10-4 MGMT$HOSTPATCH_HOST_COMPL

Column

Description

HOST_NAME

Host name

PKG_NAME

Package name

VERSION

Version of the package

IS_OUT_OF_DATE

If out of date

IS_ROGUE

If it is rogue

11 Management Template Views

This chapter provides a description of each management template view and its columns. It contains the following sections:

- MGMT$TEMPLATES

- MGMT$TEMPLATE_POLICY_SETTINGS

- MGMT$TEMPLATE_METRICCOLLECTION

- MGMT$TEMPLATE_METRIC_SETTINGS

For examples of how to use views, see Chapter 20, "Examples".

11.1 MGMT$TEMPLATES

The MGMT$TEMPLATES views displays details of all the management templates stored in the Management Repository.

Table 11-1 MGMT$TEMPLATES

Column

Description

TARGET_TYPE

The target type defines the set of metrics and policies that are applicable for the target

TEMPLATE_NAME

The name of the template

TEMPLATE_GUID

The unique global identifier for the template

DESCRIPTION

The description of the template

OWNER

Enterprise Manager administrator who owns the template

IS_PUBLIC

The flag to specify whether the template is accessible to all EM administrators

CREATED_DATE

The date or time when the template is created in the repository

LAST_UPDATED_DATE

The date or time when the template was last modified in the repository

LAST_UPDATED_BY

The Enterprise Manager administrator who last updated the template

11.2 MGMT$TEMPLATE_POLICY_SETTINGS

The MGMT$TEMPLATE_POLICY_SETTINGS view displays policy settings for management templates.

Table 11-2 MGMT$TEMPLATE_POLICY_SETTINGS

Column

Description

TARGET_TYPE

The target type defines the set of metrics and policies that are applicable for the target

TEMPLATE_NAME

The name of the template

TEMPLATE_GUID

The unique global identifier for the template

POLICY_NAME

The name of the policy that is associated with the template

POLICY_GUID

The unique global identifier for the policy

CATEGORY

The name of the category the policy

Refer to MGMT$METRIC_CATEGORIES for the list of all categories

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

KEY_OPERATOR

Specifies whether the key_value columns have any SQL wildcards.

For single key column metrics, the value is 1 if the key_value has wildcard characters, 0 otherwise.

For metrics with multiple keys, a list of operators for all key columns will be stored here. For example, a metric with 3 keys (k1, k2, k3) where K1 and K2 use wildcards and K3 uses exact match, then 011 is stored in this column

PARAMETER_NAME

The name of the parameter

PREVENT_OVERRIDE

The is a flag that specifies that the metric rows with this key_value has a template override flag. Once the template override flag is ON, any template application will not update the threshold/parameter values.

POLICY_THRESHOLD

The threshold value configured for the policy parameter

ACTION_TYPE

The corrective action type configured. Possible values are:

No-Action: when no action is configured

Corrective-Action: when a repository side corrective action is configured

Agent-Fixit Job: when an Agent side fix-it job is configured.

ACTION_JOB_TYPE

Specifies the job type of the corrective action when ACTION_TYPE is ”Corrective-Action”

ACTION_JOB_NAME

Specifies the job name of the corrective action when ACTION_TYPE is ”Corrective-Action”

ACTION_JOB_OWNER

Specifies the job owner of the corrective action when ACTION_TYPE is ”Corrective-Action”

11.3 MGMT$TEMPLATE_METRICCOLLECTION

The MGMT$TEMPLATE_METRICCOLLECTIONS view displays information on the metric collections defined for a template.

Table 11-3 MGMT$TEMPLATE_METRICCOLLECTION

Column

Description

TEMPLATE_NAME

The name of the template

TARGET_TYPE

The target type defines the set of metrics and policies that are applicable for the target

TEMPLATE_GUID

The unique global identifier for the template

METRIC_NAME

The name of the metric for which the template collection is configured

METRIC_COLUMN

The name of the metric column for which the template collection is configured

METRIC_GUID

The unique global identifier for the metric column

COLLECTION_NAME

The name of the collection

IS_REPOSITORY

Indicates whether this is a repository-side collection. A repository-side collection has a PL/SQL evaluation procedure that is responsible for calculating the metric values.

FREQUENCY_CODE

The metric collection frequency type.

Possible values are:

- 1: One Time

- 2: Interval

- 3: Daily

- 4: Weekly

- 5: Monthly

- 6: Yearly

- 7: On Demand

COLLECTION_FREQUENCY

The frequency of the metric collection. Value displayed is dependent on the frequency code:

- For One Time, the start date-time is stored in DD-MON-YY HH24:MI format.

- For Interval type, the frequency in minutes is stored.

- For Daily/Weekly/Monthly/Yearly types, the hour and minute of collection is stored in HH24:MI format.

- For On-Demand type, On-Demand is stored.

UPLOAD_POLICY

The frequency with which the metric data is uploaded/stored.

11.4 MGMT$TEMPLATE_METRIC_SETTINGS

The MGMT$TEMPLATE_METRIC_SETTINGS view displays management template settings.

Table 11-4 MGMT$TEMPLATE_METRIC_SETTINGS

Column

Description

TEMPLATE_NAME

The name of the template

TARGET_TYPE

The target type defines the set of metrics and policies that are applicable for the target

TEMPLATE_GUID

The unique global identifier for the template

METRIC_NAME

The name of the metric for which the template collection is configured

METRIC_COLUMN

The name of the metric column for which the template collection is configured

METRIC_GUID

The unique global identifier for the metric column

COLLECTION_NAME

The name of the collection

CATEGORY

The name of the category the policy.

Refer to MGMT$METRIC_CATEGORIES for the list of all categories.

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key.

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

KEY_OPERATOR

Specifies whether the key_value columns have any SQL wildcards.

For single key column metrics, the value is 1 if the key_value has wildcard characters, 0 otherwise.

For metrics with multiple keys, a list of operators for all key columns will be stored here. For example, a metric with 3 keys (k1, k2, k3) where K1 and K2 use wildcards and K3 uses exact match, then 011 is stored in this column

PREVENT_OVERRIDE

The is a flag that specifies that the metric rows with this key_value has a template override flag. Once the template override flag is ON, any template application will not update the threshold/parameter values.

WARNING_OPERATOR

Defines the warning threshold condition to be applied

- 0 - GT

- 1 - EQ

- 2 - LT

- 3 - LE

- 4 - GE

- 5 - CONTAINS

- 6 - NE

- 7 - MATCH : regular expression

WARNING_THRESHOLD

The value of the warning threshold

CRITICAL_OPERATOR

Defines the critical threshold condition to be applied

- 0 - GT

- 1 - EQ

- 2 - LT

- 3 - LE

- 4 - GE

- 5 - CONTAINS

- 6 - NE

- 7 - MATCH : regular expression

CRITICAL_THRESHOLD

The value of the critical threshold

OCCURRENCE_COUNT

The number of times the test has to trigger to raise a violation

WARNING_ACTION_TYPE

The warning corrective action type configured. Possible values are:

- No-Action: when no action is configured

- Corrective-Action: when a repository side corrective action is configured

- Agent-Fixit Job: when a Management Agent side fix-it job is configured

WARNING_ACTION_JOB_TYPE

Specifies the job type of the warning corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

WARNING_ACTION_JOB_OWNER

Specifies the job owner of the warning corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

WARNING_ACTION_JOB_NAME

Specifies the job name of the warning corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

CRITICAL_ACTION_TYPE

The critical corrective action type configured. Possible values are:

- No-Action: when no action is configured

- Corrective-Action: when a repository side corrective action is configured

- Agent-Fixit Job: when a Management Agent side fix-it job is configured

CRITICAL_ACTION_JOB_TYPE

Specifies the job type of the critical corrective action when CRITICAL_ACTION_TYPE is ”Corrective-Action”

CRITICAL_ACTION_JOB_OWNER

Specifies the job owner of the critical corrective action when CRITICAL_ACTION_TYPE is ”Corrective-Action”

CRITICAL_ACTION_JOB_NAME

Specifies the job name of the critical corrective action when CRITICAL_ACTION_TYPE is ”Corrective-Action”

12 Metric Views

This chapter provides a description of each metric view and its columns. It contains the following sections:

- MGMT$METRIC_CATEGORIES

- MGMT$METRIC_COLLECTION

- MGMT$METRIC_ERROR_CURRENT

- MGMT$METRIC_ERROR_HISTORY

For examples of how to use views, see Chapter 20, "Examples".

12.1 MGMT$METRIC_CATEGORIES

The MGMT$METRIC_CATEGORIES view displays the list of classes and categories to which the metric belongs. It can be used to classify the metric based on the class (such as service or functional) and category within the class (such as security or configuration under functional class or usage or performance under service class).

Table 12-1 MGMT$METRIC_CATEGORIES

Column

Description

TARGET_TYPE

Defines the target type of the metric being categorized

TYPE_VERSION

Defines the version of the target type

METRIC_NAME

Defines the name of the metric

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, then the value in this column is a single space.

METRIC_GUID

A unique ID for the metric

METRIC_CLASS_NAME

Name of the metric class to which this metric belongs

METRIC_CATEGORY_NAME

Name of the category of the metric in the class

METRIC_CATEGORY_NLSID

The NLS ID of the category which is used by Enterprise Manager to translate the name to different languages

12.2 MGMT$METRIC_COLLECTION

The MGMT$METRIC_COLLECTION view provides the metric thresholds details, frequency, upload policy, and thresholds per target.

Table 12-2 MGMT$METRIC_COLLECTION

Column

Description

TARGET_NAME

Target where the metrics will be collected

TARGET_TYPE

Defines the set of metrics that are applicable for the target

TARGET_GUID

The unique id of the target

METRIC_NAME

Name of the metric

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, then the value in this column is a single space.

WARNING_OPERATOR

The operator for the warning threshold. This is used in the reporting environment to create a line on the graph representing the warning threshold appropriately.

Possible values:

- 0 - GT

- 1 - EQ

- 2 - LT

- 3 - LE

- 4 - CONTAINS

- 5 - NE

- 6 - MATCH : regular expression

CRITICAL_OPERATOR

The operator for the critical threshold. This is used in the reporting environment to create a line on the graph representing the critical threshold appropriately.

Possible values:

- 0 - GT

- 1 - EQ

- 2 - LT

- 3 - LE

- 4 - CONTAINS

- 5 - NE

- 6 - MATCH : regular expression

WARNING_THRESHOLD

Value for the warning severity

CRITICAL_THRESHOLD

Value for the critical severity

OCCURENCE_COUNT

The number of occurrences of a warning, critical, or clear severity before a severity record is generated

WARNING_COUNT

The number of consecutive times a metric value has exceeded the warning threshold

CRITICAL_COUNT

The number of consecutive times a metric value has exceeded the critical threshold

12.3 MGMT$METRIC_ERROR_CURRENT

The MGMT$METRIC_ERROR_CURRENT view associates current metric errors pertaining to a metric.

Table 12-3 MGMT$METRIC_ERROR_CURRENT

Column

Description

TARGET_NAME

Name of the target for which the metric collection error occurred

TARGET_TYPE

Target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique ID of the target for which the metric collection error occurred

METRIC_NAME

The underlying metric for which the metric collection error occurred

METRIC_GUID

A unique ID for the metric. It can be used to associate metric information with metric data information during reporting

METRIC_LABEL

User display name of the metric for which the error occurred

COLL_NAME

Name of the collection collecting the metric for which the error occurred

COLLECTION_TIMESTAMP

Time when the collection error occurred

ERROR_TYPE

Indicates the type of error that happened during the collection of the metric

Possible values:

- ERROR

- WARNING

ERROR_MESSAGE

Text of the error message

12.4 MGMT$METRIC_ERROR_HISTORY

The MGMT$METRIC_ERROR_HISTORY view displays the history of metric collection errors.

Table 12-4 METRIC_ERROR_HISTORY

Column

Description

TARGET_NAME

The name of the target for which the metric collection error occurred

TARGET_TYPE

Target type defines the set of metrics that are applicable for the target

TARGET_GUID

Target GUID of the target for which the metric collection error occurred

METRIC_NAME

Name of the metric for which the error occurred

METRIC_GUID

A unique ID for the metric. It can be used to associate metric information with metric data information during reporting

METRIC_LABEL

User display name of the metric for which the error occurred

COLL_NAME

Name of the collection collecting the metric for which the error occurred

COLLECTION_TIMESTAMP

The time when the collection error occurred

ERROR_TYPE

Indicates the type of error that happened during the collection of the metric

Possible values are:

- ERROR

- WARNING

ERROR_MESSAGE

Text of the error message

13 Middleware Management Views

This chapter provides a description of Middleware Management views. It includes the following section:

- Application Deployment Views

- Glassfish Views

- Oracle WebLogic Server Views

- Oracle WebLogic Domain Views

- Oracle WebLogic Cluster View

For examples of how to use views, see Chapter 20, "Examples".

13.1 Application Deployment Views

This section provides a description of each application deployment view and its columns. It contains the following sections:

- MGMT$J2EE_APPLICATION

- MGMT$J2EEAPP_EJBCOMPONENT

- MGMT$J2EEAPP_JRFWS

- MGMT$J2EEAPP_JRFWSOPER

- MGMT$J2EEAPP_JRFWSPOLICY

- MGMT$J2EEAPP_JRFWSPORT

- MGMT$J2EEAPP_WEBAPPCOMPONENT

- MGMT$J2EEAPP_WSCONFIG

- MGMT$J2EEAPP_WSPORTCONFIG

13.1.1 MGMT$J2EE_APPLICATION

The MGMT$J2EE_APPLICATION view displays general information about the Application configuration.

Table 13-1 MGMT$J2EE_APPLICATION

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

PATH

The fully resolved location of the application source files on the administration server

LOADORDER

A number value that indicates when the unit is deployed, relative to other DeployableUnits on a server, during startup

TYPE

Type of the module. The string value must match those defined by JSR 88: Java EE Application Deployment such as EAR or WAR.

13.1.2 MGMT$J2EEAPP_EJBCOMPONENT

The MGMT$J2EEAPP_EJBCOMPONENT view displays general information about the Enterprise JavaBeans (EJB) modules.

Table 13-2 MGMT$J2EEAPP_EJBCOMPONENT

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the EJB component

DEPLOYMENTORDER

Priority that the server uses when it deploys an item. The priority is relative to the other deployable items of same type.

KEEPGENERATED

Indicates whether KeepGenerated is enabled and whether EJB source files will be kept. Values: true, false.

13.1.3 MGMT$J2EEAPP_JRFWS

The MGMT$J2EEAPP_JRFWS view displays general information about the Java Required Files (JRF) Web Services configuration.

Table 13-3 MGMT$J2EEAPP_JRFWS

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SERVICENAME

Name of JRF web service

WEBMODULE

Name of web module that contains the JRF web service

JRFWEBSERVICEKEY

Key column computed as WebModuleName_WebServiceName where WebModuleName is the name of web module that contains the JRF web service and WebServiceName is the name of the JRF web service

DATABINDING

Data binding technology used by the web service port

EXPOSEWSDL

Specifies if the web service definition language (WSDL) is exposed for the service. Values: true, false.

METADATAEXCHANGE

Usage of WS-MetadataExchange for WSDL advertisement. Values: true, false

EXPOSETESTPAGE

Specifies whether the test page is exposed for the service. Values: true, false

13.1.4 MGMT$J2EEAPP_JRFWSOPER

The MGMT$J2EEAPP_JRFWSOPER view displays general information about the JRF Web Services Operation configuration.

Table 13-4 MGMT$J2EEAPP_JRFWSOPER

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SERVICENAME

Name of the JRF web service

WEBMODULE

Name of the web module that contains the JRF web service

PORTNAME

Name of the JRF web service port

OPERATIONNAME

Name of the JRF web service port operation

SOAPACTION

SOAP action

ONEWAY

Indicates whether the operation is one-way. Values: true, false

INPUTENCODING

Operation input encoding

OUTPUTENCODING

Operation output encoding

13.1.5 MGMT$J2EEAPP_JRFWSPOLICY

The MGMT$J2EEAPP_JRFWSPOLICY view displays general information about the JRF Web Services Policy configuration.

Table 13-5 MGMT$J2EEAPP_JRFWSPOLICY

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SERVICENAME

Name of the JRF web service

WEBMODULE

Name of the web module that contains the JRF web service

PORTNAME

Name of the JRF web service port

URI

Policy reference URI

CATEGORY

Category of the WS-Policy Reference. For example, security.

ENABLED

Specifies whether the policy references are enabled. Values: true, false.

13.1.6 MGMT$J2EEAPP_JRFWSPORT

The MGMT$J2EEAPP_JRFWSPORT view displays general information about the JRF web services port configuration.

Table 13-6 MGMT$J2EEAPP_JRFWSPORT

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SERVICENAME

Name of the JRF web service

WEBMODULE

Name of web module that contains the JRF web service

PORTNAME

Name of the JRF web service port

AVAILABLE

Indicates if a port is available.

Possible Values:

- True

- False

RESTSUPPORTED

Indicates whether the port supports REST.

Possible Values:

- True

- False

LOGGINGLEVEL

The logging level for the web service port

MAXREQUESTSIZE

Largest size of message in bytes the port can accept

STYLE

SOAP binding style

SOAPVERSION

Version of the SOAP protocol the port supports

STATEFUL

Indicates if the port is stateful.

Possible Values:

- True

- False

IMPLEMENTORTYPE

Implementor type of this port, such as JAXWS or JAXRPC

TRANSPORTS

Transports from which the web service port is available

ENDPOINTADDRESSURI

The sub-context of the HTTP URL of the web service port exposing an EJB(2.1)

POLICYSUBJECTNAME

The name of the policy subject

POLICYSUBJECTRESOURCEPATTERN

The resource pattern of the policy subject

POLICYATTACHMENTSUPPORT

Determines the class of the supported policies

POLICYSUBJECTTYPE

The type of the policy subject

LEGACYCONFIG

Indicates whether the port has legacy management configuration.

Possible values:

- True

- False

IMPLEMENTORCLASS

The name of the user-provided class that implements the web service port

WSDLURI

The URI to the port WSDL definition

SCHEMAVALIDATEINPUT

Optional validation of input against WSDL schema.

Possible values:

- True

- False

ASYNC

Specifies if async is available.

Possible values:

- True

- False

ASYNCJNDIDESTRESPONSE

JMS queue name for saving responses

ASYNCJNDIDEST

JMS queue name for saving asynchronous requests

ASYNCCONNFACTRESPONSE

JMS connection factory name for saving responses

ASYNCCONNFACT

JMS connection factory name for saving asynchronous requests

13.1.7 MGMT$J2EEAPP_WEBAPPCOMPONENT

The MGMT$J2EEAPP_WEBAPPCOMPONENT view displays general information about the web modules.

Table 13-7 MGMT$J2EEAPP_WEBAPPCOMPONENT

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the web module

DEPLOYMENTORDER

A priority that the server uses to determine when it deploys an item. The priority is relative to other deployable items of the same type

CONTEXTPATH

Context path

SESSIONTIMEOUTSECS

Session timeout in seconds

13.1.8 MGMT$J2EEAPP_WSCONFIG

The MGMT$J2EEAPP_WSCONFIG view displays general information about the Web Service configuration.

Table 13-8 MGMT$J2EEAPP_WSCONFIG

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SERVICENAME

Name of the web service

NAMEINWSDL

The "name" attribute of the "service" element in the WSDL that describes the Web service. It is specified at development time using the serviceName attribute of the @WebService JWS annotation

IMPLEMENTATIONTYPE

Implementation type of the service. The allowed values are: JAX-WS 2.0 JAX-RPC 1.1

URI

URI of this Web Service. The value corresponds to the final part of the endpoint address in the WSDL that describes the Web services

13.1.9 MGMT$J2EEAPP_WSPORTCONFIG

The MGMT$J2EEAPP_WSPORTCONFIG view displays general information about the Web Services Port configuration.

Table 13-9 MGMT$J2EEAPP_WSPORTCONFIG

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: j2ee_application

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SERVICENAME

The "name" attribute of the "service" element in the WSDL that describes the Web service. It is specified at development time using the serviceName attribute of the @WebService JWS annotation.

PORTNAME

Name of the web service port

TRANSPORTPROTOCOL

Transport protocol used to invoke this web service, such as HTTP, HTTPS, or JMS

13.2 Glassfish Views

This section provides a description of each glassfish view and its columns. It contains the following sections:

- MGMT$EMAS_GLASSFISH_DOMAIN

- MGMT$EMAS_GLASSFISH_NODES

- MGMT$EMAS_GLASSFISH_SERVER

- MGMT$EMAS_GLASSFISH_SVR_PROP

- MMGMT$EMAS_GLASSFISH_NW_LSTNR

- MGMT$EMAS_GLASSFISH_DATASOURCE

- MGMT$EMAS_GLASSFISH_DS_PROP

13.2.1 MGMT$EMAS_GLASSFISH_DOMAIN

The MGMT$EMAS_GLASSFISH_DOMAIN view displays general information about the glassfish domain target.

Table 13-10 MGMT$EMAS_GLASSFISH_DOMAIN

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target.

CM_TARGET_TYPE

The type of target: glassfish_domain

CM_TARGET_NAME

The name of target in Enterprise Manager

CM_SNAPSHOT_TYPE

The type of snapshot which collected the config metric

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

DOMAINNAME

Name of the domain

FULLVERSION

Version of the domain

CONFIGDIR

Config directory of the domain

INSTALLDIR

Install directory of the domain

DEBUGPORT

Debug port of the node

SECUREADMINENABLED

Secure admin enabled or not

13.2.2 MGMT$EMAS_GLASSFISH_NODES

The MGMT$EMAS_GLASSFISH_NODES view displays general information about the nodes configured on a glassfish domain target.

Table 13-11 MGMT$EMAS_GLASSFISH_NODES

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target.

CM_TARGET_TYPE

The type of target: glassfish_domain

CM_TARGET_NAME

The name of target in Enterprise Manager

CM_SNAPSHOT_TYPE

The type of snapshot which collected the config metric

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NODENAME

Name of the node

NODEDIR

Directory of the node

NODEHOST

Host of the node

TYPE

Type of the node

INSTALLDIR

Install directory of the node

13.2.3 MGMT$EMAS_GLASSFISH_SERVER

The MGMT$EMAS_GLASSFISH_SERVER view displays general information about the glassfish server target.

Table 13-12 MGMT$EMAS_GLASSFISH_SERVER

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target.

CM_TARGET_TYPE

The type of target: glassfish_j2eeserver

CM_TARGET_NAME

The name of target in Enterprise Manager

CM_SNAPSHOT_TYPE

The type of snapshot which collected the config metric

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SERVERNAME

Name of the server

HOST

Host of the server

SERVERVERSION

The version of the server

SERVICEURL

The ServiceURL of the server

LISTEPORT

The listenport of the server

JAVAVENDOR

The name of the java vendor

JAVAVERSION

The version of the java

13.2.4 MGMT$EMAS_GLASSFISH_SVR_PROP

The MGMT$EMAS_GLASSFISH_SVR_PROP view displays the system properties of the glassfish server target.

Table 13-13 MGMT$EMAS_GLASSFISH_SVR_PROP

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target.

CM_TARGET_TYPE

The type of target: glassfish_j2eeserver

CM_TARGET_NAME

The name of target in Enterprise Manager

CM_SNAPSHOT_TYPE

The type of snapshot which collected the config metric

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

The system property name

TYPE

The system property value

13.2.5 MMGMT$EMAS_GLASSFISH_NW_LSTNR

The MGMT$EMAS_GLASSFISH_NW_LSTNR view displays the network listeners of the glassfish server target.

Table 13-14 MGMT$EMAS_GLASSFISH_NW_LSTNR

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target.

CM_TARGET_TYPE

The type of target: glassfish_j2eeserver

CM_TARGET_NAME

The name of target in Enterprise Manager

CM_SNAPSHOT_TYPE

The type of snapshot which collected the config metric

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

The name of the network listener

PROTOCOL

The protocol of the network listener

TRANSPORT

The name of the transport

ADDRESS

The address of the listener

ENABLED

The enabled flag of the network listener

SECURITYENABLED

The security enabled flag of the network listener

PORT

The port of the network listener

13.2.6 MGMT$EMAS_GLASSFISH_DATASOURCE

The MGMT$EMAS_GLASSFISH_DATASOURCE view displays information about the JDBC Datasource.

Table 13-15 MGMT$EMAS_GLASSFISH_DATASOURCE

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target.

CM_TARGET_TYPE

The type of target: glassfish_j2eeserver

CM_TARGET_NAME

The name of target in Enterprise Manager

CM_SNAPSHOT_TYPE

The type of snapshot which collected the config metric

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

JDBCDATASOURCENAME

The name of the JDBC datasource

JNDINAME

The JNDI name of the datasource

POOLNAME

The name of the connection pool

MINPOOLSIZE

The initial and minium pool size

MAXPOOLSIZE

The maximum pool size

POOLRESIZEQUANTITY

The pool resize quantity

STATEMENTCACHESIZE

The statement cache size

IDLETIMEOUT

The idle timeout

13.2.7 MGMT$EMAS_GLASSFISH_DS_PROP

The MGMT$EMAS_GLASSFISH_DS_PROP view displays the properties of a JDBC datasource for the glassfish server target.

Table 13-16 MGMT$EMAS_GLASSFISH_DATASOURCE

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target.

CM_TARGET_TYPE

The type of target: glassfish_j2eeserver

CM_TARGET_NAME

The name of target in Enterprise Manager

CM_SNAPSHOT_TYPE

The type of snapshot which collected the config metric

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

JDBCDATASOURCENAME

The name of the JDBC datasource

NAME

The property name

VALUE

The property value

13.3 Oracle WebLogic Server Views

This section provides a description of each Oracle WebLogic server view and its columns. It contains the following sections:

- MGMT$WEBLOGIC_APPLICATIONS

- MGMT$WEBLOGIC_EJBCOMPONENT

- MGMT$WEBLOGIC_FILESTORE

- MGMT$WEBLOGIC_JDBCDATASOURCE

- MGMT$WEBLOGIC_JDBCMULTIDS

- MGMT$WEBLOGIC_JMSCONNFACTORY

- MGMT$WEBLOGIC_JMSQUEUE

- MGMT$WEBLOGIC_JMSSERVER

- MGMT$WEBLOGIC_JMSTOPIC

- MGMT$WEBLOGIC_JOLTCONNPOOL

- MGMT$WEBLOGIC_JVMSYSPROPS

- MGMT$WEBLOGIC_MACHINE

- MGMT$WEBLOGIC_NETWORK_CHANNELS

- MGMT$WEBLOGIC_NODEMANAGER

- MGMT$WEBLOGIC_RACONFIG

- MGMT$WEBLOGIC_RAOUTBOUNDCONFIG

- MGMT$WEBLOGIC_RESOURCECONFIG

- MGMT$WEBLOGIC_SERVER

- MGMT$WEBLOGIC_STARTSHUTCLASSES

- MGMT$WEBLOGIC_VIRTUALHOST

- MGMT$WEBLOGIC_WEBAPPCOMPONENT

- MGMT$WEBLOGIC_WORKMANAGER

- MGMT$WEBLOGIC_WSCONFIG

- MGMT$WEBLOGIC_WSPORTCONFIG

13.3.1 MGMT$WEBLOGIC_APPLICATIONS

The MGMT$WEBLOGIC_APPLICATIONS view displays general information about the Application configuration.

Table 13-17 MGMT$WEBLOGIC_APPLICATIONS

Column

Description

NAME

The name of the application

PATH

The fully resolved location of the application source files on the admin server

LOADORDER

A numeric value that indicates when the unit is deployed, relative to other DeployableUnits on a server, during startup

TWOPHASE

A boolean value indicating if the application is deployed using the two-phase deployment protocol

TYPE

Type of the module. The string value must match those defined by JSR 88: Java EE Application Deployment such as EAR and WAR

13.3.2 MGMT$WEBLOGIC_EJBCOMPONENT

The MGMT$WEBLOGIC_EJBCOMPONENT view displays general information about the EJB modules.

Table 13-18 MGMT$WEBLOGIC_EJBCOMPONENT

Column

Description

NAME

Name of the EJB component

APPLICATION

Name of the application that includes the component

DEPLOYMENTORDER

Priority that the server uses when it deploys an item. The priority is relative to the other deployable items of same type

KEEPGENERATED

Indicates whether KeepGenerated is enabled and whether EJB source files will be kept.

Possible values:

- True: KeepGenerated is enabled and EJB source files are stored.

- False: KeepGenerated is not enabled and EJB source files are not stored

13.3.3 MGMT$WEBLOGIC_FILESTORE

Each row of the MGMT$WEBLOGIC_FILESTORE view represents configuration data of the file store configured for the WebLogic server.

Table 13-19 MGMT$WEBLOGIC_FILESTORE

Column

Description

ECM_SNAPSHOT_ID

The GUID of the snapshot

NAME

Name of the file store

DIRECTORY

The path name to the file system directory where the file store maintains its data files

SYNCHRONOUSWRITEPOLICY

The disk write policy that determines how the file store writes data to disk

MAXFILESIZE

The maximum file size, in bytes

13.3.4 MGMT$WEBLOGIC_JDBCDATASOURCE

The MGMT$WEBLOGIC_JDBCDATASOURCE view displays general information about Java Database Connectivity (JDBC) Data Sources that provides database connectivity through a pool of JDBC connections.

Table 13-20 MGMT$WEBLOGIC_JDBCDATASOURCE

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of JDBC Data Source

JNDINAME

The Java Naming and Directory Interface (JNDI) path to where this Data Source is bound. By default, the JNDI name is the name of the data source

ROWPREFETCHENABLED

This value is set to TRUE if row prefetching is enabled. Otherwise, the value is set to FALSE.

ROWPREFETCHSIZE

The number of result set rows to prefetch for a client if row prefetching is enabled

ENABLETWOPHASECOMMIT

This value is set to TRUE if two phase commit is enabled. Otherwise, this value is set to FALSE.

URL

The URL of the database to which to connect. The format of the URL varies depending on the JDBC driver.

DRIVERNAME

The full package name of the JDBC driver class used to create physical database connections in the connection pool in the data source.

CAPACITYINCREMENT

The number of connections created when new connections are added to the connection pool.

INITIALCAPACITY

The number of physical connections to create when creating the connection pool in the data source.

MAXCAPACITY

The maximum number of physical connections that the connection pool can contain.

CONNECTIONRESERVETIMEOUT

The number of seconds after which a call to reserve a connection from the connection pool will time out.

INACTIVECONNECTIONTIMEOUT

The number of inactive seconds on a reserved connection before Oracle WebLogic Server reclaims the connection and releases it back to the connection pool.

STATEMENTCACHESIZE

The number of prepared and callable statements stored in the connection cache

HOST

Database host

PORT

Database port

SID

Database system identifier (SID)

SERVICENAME

Database service name

PROTOCOL

The communications protocol

ENABLE_JAVA_NET_FASTPATH

Enables the Oracle JDBC JavaNet Fastpath to reduce data copies and fragmentation

OPT_UTF8_CONVERSION

Enables the Oracle JDBC optimize UTF-8 conversion option

STATEMENTCACHETYPE

Statement Cache type parameter from the JDBC connection pool parameters

PINNEDTOTHREAD

Pinned to thread parameters from the JDBC connection pool parameters

13.3.5 MGMT$WEBLOGIC_JDBCMULTIDS

The MGMT$WEBLOGIC_JDBCMULTIDS view displays general information about the JDBC Multi Data Sources.

Table 13-21 MGMT$WEBLOGIC_JDBCMULTIDS

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

JDBC multi data source name

JNDINAME

The JNDI path to where this data source is bound

ALGORITHMTYPE

The algorithm determines the connection request processing for the multi data source

DATASOURCELIST

The list of data sources to which multi data source routes connection requests. The order of data sources in the list determines the failover order.

13.3.6 MGMT$WEBLOGIC_JMSCONNFACTORY

The MGMT$WEBLOGIC_JMSCONNFACTORY view displays general information about the JMS Connection Factory.

Table 13-22 MGMT$WEBLOGIC_JMSCONNFACTORY

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the Java Message Service (JMS) connection factory

MODULENAME

Name of the JMS module

JNDINAME

The global JNDI name used to look up a connection factory within a clustered JNDI namespace

TXNTIMEOUTINSECS

The timeout value (in seconds) for all transactions on connections created with this connection factory

ACKNOWLEDGEPOLICY

Acknowledge policy for non-transacted sessions that use the CLIENT_ACKNOWLEDGE mode

MESSAGESMAXIMUM

The maximum number of messages that can exist for an asynchronous session and that have not yet been passed to the message listener

SENDTIMEOUT

The maximum length of time, in milliseconds, that a sender will wait when there is not enough available space (no quota) on a destination to accommodate the message being sent

13.3.7 MGMT$WEBLOGIC_JMSQUEUE

The MGMT$WEBLOGIC_JMSQUEUE view displays general information about the JMS queue.

Table 13-23 MGMT$WEBLOGIC_JMSQUEUE

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the JMS queue

MODULENAME

Name of the JMS module

JNDINAME

The global JNDI name used to look up a JMS queue within a clustered JNDI namespace

MAXIMUMMESSAGESIZE

The maximum size of a message that is accepted from producers on this destination

BYTESMAXIMUM

The maximum size of a message that is accepted from producers on this destination

MESSAGESMAXIMUM

The total number of messages that can be stored in a destination that uses this quota

BYTESPAGINGENABLED

Bytes paging enabled for this JMS server

MESSAGESPAGINGENABLED

Messages paging enabled for this JMS server

STOREENABLED

Store enabled for this JMS server

TARGET

The JMS server to which the JMS queue is targeted

13.3.8 MGMT$WEBLOGIC_JMSSERVER

The MGMT$WEBLOGIC_JMSSERVER view displays general information about the JMS server. Each row represents configuration data of the JMS server configured for the WebLogic server.

Table 13-24 MGMT$WEBLOGIC_JMSSERVER

Column

Description

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the JMS server

BYTESMAXIMUM

The maximum number of bytes that can be stored in this JMS server

MESSAGESMAXIMUM

The maximum number of messages that can be stored in this JMS server

MESSAGEBUFFERSIZE

The amount of memory (in bytes) that this JMS server can use to store message bodies before it writes them to disk

MAXIMUMMESSAGESIZE

The maximum number of bytes allowed in individual messages on this JMS server

PERSISTENTSTORE

The file or database in which this JMS server stores persistent messages

STOREENABLED

Persistent store enabled status

13.3.9 MGMT$WEBLOGIC_JMSTOPIC

The MGMT$WEBLOGIC_JMSTOPIC view displays general information about the JMS topic.

Table 13-25 MGMT$WEBLOGIC_JMSTOPIC

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the JMS topic

MODULENAME

Name of the JMS module

JNDINAME

The global JNDI name used to look up a JMS topic within a clustered JNDI namespace

MAXIMUMMESSAGESIZE

The maximum size of a message that is accepted from producers on this destination

BYTESMAXIMUM

The total number of bytes that can be stored in a destination that uses this quota

MESSAGESMAXIMUM

The total number of messages that can be stored in a destination that uses this quota

MULTICASTPORT

The IP port that this topic uses to transmit messages to multicast consumers

TARGET

The JMS server to which the JMS topic is targeted

13.3.10 MGMT$WEBLOGIC_JOLTCONNPOOL

The MGMT$WEBLOGIC_JOLTCONNPOOL view displays general information about the Jolt Connection Pool.

Table 13-26 MGMT$WEBLOGIC_JOLTCONNPOOL

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the Jolt connection pool

PRIMARYADDRESSES

The list of addresses for the primary Jolt Server Listeners (JSLs)

FAILOVERADDRESSES

The list of Jolt Server Listeners (JSL) addresses that is used if the connection pool cannot establish connections to the Primary Addresses, or if the primary connections fail

MINIMUMPOOLSIZE

The minimum number of connections to be added to this Jolt connection pool when the WebLogic Server starts

MAXIMUMPOOLSIZE

The maximum number of connections that can be made from this Jolt connection pool

RECVTIMEOUT

The number of seconds the client waits to receive a response before timing out

13.3.11 MGMT$WEBLOGIC_JVMSYSPROPS

Each row in the MGMT$WEBLOGIC_JVMSYSPROPS view represents configuration data of JVM System Properties that are configured for the WebLogic server.

Table 13-27 MGMT$WEBLOGIC_JVMSYSPROPS

Column

Description

ECM_SNAPSHOT_ID

GUID of the snapshot

KEY

JVM system properties name

VALUE

Value for Operating System (OS) user, name, version, architecture, Java home, and JVM version

13.3.12 MGMT$WEBLOGIC_MACHINE

The MGMT$WEBLOGIC_MACHINE view displays general information about the systems.

Table 13-28 MGMT$WEBLOGIC_MACHINE

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

MACHINENAME

The name of the system

MACHINETYPE

The type of the system

POSTBINDGID

The UNIX group ID (GID) that a server running on this system will run under after it has carried out all privileged startup actions. Otherwise, the server will continue to run under the group under which it was started. (Requires that you enable Post-Bind GID.)

POSTBINDGIDENABLED

Specifies whether a server running on this system binds to a UNIX Group ID (GID) after it has carried out all privileged startup actions

POSTBINDUID

The UNIX user ID (UID) that a server running on this system will run under after it has carried out all privileged startup actions. Otherwise, the server will continue to run under the account under which it was started. (Requires that you enable Post-Bind UID.)

POSTBINDUIDENABLED

Specifies whether a server running on this system binds to a UNIX User ID (UID) after it has carried out all privileged startup actions

13.3.13 MGMT$WEBLOGIC_NETWORK_CHANNELS

The MGMT$WEBLOGIC_NETWORK_CHANNELS view displays general information about the Network Channels.

Table 13-29 MGMT$WEBLOGIC_NETWORK_CHANNELS

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the network channel

LISTEN_ADDRESS

The IP address or DNS name this network channel uses to listen for incoming connections

LISTEN_PORT

The default TCP port this network channel uses to listen for regular (non-SSL) incoming connections

ENABLED

Specifies whether this channel should be started

SDP_ENABLED

Specifies if Socket Direct Protocol (SDP) is enabled on this channel

OUTBOUND_ENABLED

Specifies whether new server-to-server connections can consider this network channel when initiating a connection

CUSTOM_PROPERTIES

Custom properties for the network channel

13.3.14 MGMT$WEBLOGIC_NODEMANAGER

The MGMT$WEBLOGIC_NODEMANAGER view displays general information about the Node Manager.

Table 13-30 MGMT$WEBLOGIC_NODEMANAGER

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

LISTENADDRESS

The host name or IP address where Node Manager listens for connection requests

MACHINENAME

The name of the Node manager system

NMTYPE

Node manager type

LISTENPORT

The port number where Node Manager listens for connection requests

NODEMANAGERUSERNAME

The Node manager user name

STARTSCRIPTENABLED

Value of the StartScriptEnabled property in the nodemanager.properties

NODEMANAGERHOME

Home directory path of the Node Manager

13.3.15 MGMT$WEBLOGIC_RACONFIG

The MGMT$WEBLOGIC_RACONFIG view displays general information about the Resource Adapter.

Table 13-31 MGMT$WEBLOGIC_RACONFIG

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the resource adapter

VERSION

Version of the resource adapter

VENDORNAME

Vendor name

EISTYPE

Enterprise Information Systems (EIS) type

RAVERSION

Resource adapter version

ENABLEACCESS

Enable access outside application

13.3.16 MGMT$WEBLOGIC_RAOUTBOUNDCONFIG

The MGMT$WEBLOGIC_RAOUTBOUNDCONFIG view displays general information about the Resource Adapter Outbound configuration.

Table 13-32 MGMT$WEBLOGIC_RAOUTBOUNDCONFIG

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the resource adapter

CONNFACTINTERFACE

Connection factory interface

MANAGEDCONNFACTCLASS

Managed connection factory class

JNDINAME

JNDI Name

TRANSACTIONSUPPORT

Specifies the level of transaction support for a particular Connection Factory. It provides the ability to override the transaction-support value specified in the ra.xml deployment descriptor that is intended to be the default value for all Connection Factories of the resource adapter.

INITIALCAPACITY

Specifies the initial number of ManagedConnections, which WebLogic Server attempts to create during deployment

MAXCAPACITY

Specifies the maximum number of ManagedConnections, which WebLogic Server will allow. Requests for newly allocated ManagedConnections beyond this limit results in a ResourceAllocationException being returned to the caller.

CAPACITYINCREMENT

Specifies the maximum number of additional ManagedConnections that WebLogic Server attempts to create during resizing of the maintained connection pool.

SHRINKENABLED

Specifies whether unused ManagedConnections will be destroyed and removed from the connection pool as a means to control system resources

SHRINKFREQ

Specifies the amount of time (in seconds) the Connection Pool Management waits between attempts to destroy unused ManagedConnections

HIGHNOWAITER

Specifies the maximum number of threads that can concurrently block waiting to reserve a connection from the pool

HIGHNOUNAVAILABLE

Specifies the maximum number of ManagedConnections in the pool that can be made unavailable to the application for purposes such as refreshing the connection

CONNCREATIONRETRYFREQ

The number of seconds between when the connection pool retries to establish connections to the database

CONNRESERVETIMEOUT

The number of seconds after which a call to reserve a connection from the connection pool will timeout

TESTFREQUENCY

The number of seconds between when WebLogic Server tests unused database connections

TESTCONNONCREATE

Specifies whether WebLogic Server tests a connection after creating it but before adding it to the list of connections available in the pool

TESTCONNONRELEASE

Specifies whether WebLogic Server tests a connection before returning it to this JDBC connection pool

TESTCONNONRESERVE

Specifies whether WebLogic Server tests a connection before giving it to the client

PROFILEHARVESTFREQ

Specifies how frequently the profile for the connection pool is being harvested

IGNOREINUSECONNENABLED

When the connection pool is being shut down, this element is used to specify whether it is acceptable to ignore connections that are in use at that time

MATCHCONNSUPPORTED

Indicates whether the resource adapter supports the ManagedConnectionFactory.matchManagedConnections() method. If the resource adapter does not support this method (always returns null for this method), then WebLogic Server bypasses this method call during a connection request.

13.3.17 MGMT$WEBLOGIC_RESOURCECONFIG

The MGMT$WEBLOGIC_RESOURCECONFIG view displays general information about the Resource configuration.

Table 13-33 MGMT$WEBLOGIC_RESOURCECONFIG

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

STARTHEAP

Start heap value

MAXHEAP

Maximum heap value

13.3.18 MGMT$WEBLOGIC_SERVER

The MGMT$WEBLOGIC_SERVER view displays the information about the various ports of Oracle WebLogic Server.

Table 13-34 MGMT$WEBLOGIC_SERVER

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

LISTENPORT

The default TCP port that this server uses to listen for regular (non-SSL) incoming connections

ADMINISTRATIONPORT

The common secure admi.nistration port for this WebLogic Server domain

NATIVEIOENABLED

Specifies whether native input or output is enabled for the server

MAXOPENSOCKETCOUNT

The maximum number of open sockets allowed in the server at a given point of time

STUCKTHREADMAXTIME

The number of seconds that a thread must be continually working before this server considers the thread stuck

STUCKTHREADTIMERINTERVAL

The number of seconds after which WebLogic Server periodically scans threads to see if they have been continually working for the configured maximum length of time

ACCEPTBACKLOG

The number of backlogged, new TCP connection requests that should be allowed for this server's regular and SSL ports

LOGINTIMEOUT

The login timeout for this server's default regular (non-SSL) listen port. This is the maximum amount of time allowed for a new connection to establish.

MANAGEDSERVERINDENABLED

Specifies whether this Managed Server can be started when the Administration Server is unavailable.

LOWMEMGCTHRESHOLD

The threshold level (in percent) that this server uses for logging low memory conditions and changing the server health state to Warning

LOWMEMGRANULARITYLEVEL

The granularity level (in percent) that this server uses for logging low memory conditions and changing the server health state to Warning

LOWMEMORYSAMPLESIZE

The number of times this server samples free memory during the time period specified by LowMemoryTimeInterval

LOWMEMTIMEINTERVAL

The amount of time (in seconds) that defines the interval over which this server determines average free memory values

SSLLISTENPORT

The TCP/IP port at which this server listens for SSL connection requests

SSLLOGINTIMEOUT

SSL Login time out

CLUSTERNAME

The cluster, or group of WebLogic Server instances, to which this server belongs

CLUSTERWEIGHT

The proportion of the load that this server will bear, relative to other servers in a cluster

JAVAVMVENDOR

Java Virtual Machine (VM) vendor

JAVAVERSION

Java version installed on this server

MACHINENAME

Name of the system where this server is installed

DOMAINHOME

Path of the WebLogic domain which contains the WebLogic server target

MAXPOSTSIZE

Maximum post size

JSSE_ENABLED

Java Secure Socket Extension (JSSE) enabled

SCATTERED_READS_ENABLED

Specifies whether scattered reads over NIO Socket channels is enabled

GATHERED_WRITES_ENABLED

Specifies whether gathered writes over NIO socket channels. is enabled

REPLICATION_PORTS

Listen ports used by replication channels when the WebLogic server is running on Exalogic systems

BINARY_HOST

The host on which the WebLogic is installed in cases where WebLogic binaries installed on one host are used through mounts in WebLogic instances running on other hosts

BINARY_WEBLOGICHOME

The WebLogic home where the WebLogic binaries are installed on the binary host

LISTENADDRESS

The listen address on which the server is listening to on a non-secure port as configured

SSLLISTENADDRESS

The listen address on which the server is listening to on a secure port as configured

13.3.19 MGMT$WEBLOGIC_STARTSHUTCLASSES

The MGMT$WEBLOGIC_STARTSHUTCLASSES view displays general information about the Startup and Shutdown classes.

Table 13-35 MGMT$WEBLOGIC_STARTSHUTCLASSES

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the startup or shutdown class

TYPE

Type of class – startup or shutdown

CLASSNAME

The fully qualified name of a class to load and run. The class must be on the server's class path.

DEPLOYMENTORDER

A priority that the server uses to determine when it deploys an item. The priority is relative to other deployable items of the same type.

ARGUMENTS

Arguments that a server uses to initialize a class

13.3.20 MGMT$WEBLOGIC_VIRTUALHOST

The MGMT$WEBLOGIC_VIRTUALHOST view displays general information about the Virtual Hosts configuration.

Table 13-36 MGMT$WEBLOGIC_VIRTUALHOST

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of virtual host

DEPLOYMENTORDER

A priority that the server uses to determine when it deploys an item. The priority is relative to other deployable items of the same type.

FRONTENDHOST

The name of the host to which all redirected URLs will be sent. If specified, WebLogic Server will use this value rather than the one in the HOST header.

FRONTENDHTTPPORT

The name of the HTTP port to which all redirected URLs will be sent. If specified, WebLogic Server will use this value rather than the one in the HOST header.

FRONTENDHTTPSPORT

The name of the secure HTTP port to which all redirected URLs will be sent. If specified, WebLogic Server will use this value rather than the one in the HOST header.

VIRTUALHOSTNAMES

The list of host names, separated by line breaks, for which this virtual host will serve requests

NETWORKACCESSPOINT

The dedicated server channel name (NetworkAccessPoint) for which this virtual host will serve HTTP request

LOGFILENAME

The name of the file that stores HTTP requests. If the path name is not absolute, the path is assumed to be relative to the root directory of the system on which this server is running.

LOGGINGENABLED

Indicates whether this server logs HTTP requests

MAXPOSTSIZE

The maximum post size this server allows for reading HTTP POST data in a servlet request. A value less than 0 indicates an unlimited size.

13.3.21 MGMT$WEBLOGIC_WEBAPPCOMPONENT

The MGMT$WEBLOGIC_WEBAPPCOMPONENT displays general information about the web modules.

Table 13-37 MGMT$WEBLOGIC_WEBAPPCOMPONENT

Column

Description

NAME

Name of the web module

APPLICATION

Name of the application that includes the component

DEPLOYMENTORDER

Priority that the server uses when it deploys an item. The priority is relative to the other deployable items of same type

CONTEXTPATH

Context path of the web module

SESSIONTIMEOUTSECS

Session timeout in seconds

13.3.22 MGMT$WEBLOGIC_WORKMANAGER

The MGMT$WEBLOGIC_WORKMANAGER view displays general information about the Work Manager configuration.

Table 13-38 MGMT$WEBLOGIC_WORKMANAGER

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_j2eeserver

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

NAME

Name of the work manager

IGNORESTUCKTHREADS

Specifies whether this Work Manager ignores ”stuck” threads

MINIMUMTHREADS

Minimum number of concurrent threads executing requests that share this constraint

MAXIMUMTHREADS

Maximum number of concurrent threads that can execute requests sharing this constraint

REQUESTCLASSTYPE

Type of request class

REQUESTCLASSNAME

Request class name

CAPACITYCONSTRAINT

Total number of requests that can be enqueued

13.3.23 MGMT$WEBLOGIC_WSCONFIG

The MGMT$WEBLOGIC_WSCONFIG view displays general information about the web service configuration.

Table 13-39 MGMT$WEBLOGIC_WSCONFIG

Column

Description

NAME

The name of the web service configuration

SERVICENAME

Name of the web service. Corresponds to the name attribute of the service element in the WSDL that describes the web service

APPNAME

The name of the application

IMPLEMENTATIONTYPE

Implementation type of the service

Possible values:

- JAX-WS 2.0

- JAX-RPC 1.1

URI

URI of this web service. The value corresponds to the final part of the endpoint address in the WSDL that describes the web services

13.3.24 MGMT$WEBLOGIC_WSPORTCONFIG

The MGMT$WEBLOGIC_WSPORTCONFIG view displays general information about the web services port configuration.

Table 13-40 MGMT$WEBLOGIC_WSPORTCONFIG

Column

Description

NAME

Name of the web services port configuration

SERVICENAME

Name of the web service. Corresponds to the name attribute of the service element in the WSDL that describes the web service

APPNAME

The name of the application

TRANSPORTPROTOCOL

Transport protocol used to invoke this web service, such as HTTP, HTTPS, or JMS

13.4 Oracle WebLogic Domain Views

This section provides a description of each Oracle WebLogic domain view and its columns. It contains the following sections:

- MGMT$WEBLOGIC_DOMAIN

- MGMT$WEBLOGIC_OPSSSYSPROP

- MGMT$WEBLOGIC_OAMCONFIG

13.4.1 MGMT$WEBLOGIC_DOMAIN

The MGMT$WEBLOGIC_DOMAIN view displays general information about the WebLogic Domain configuration.

Table 13-41 MGMT$WEBLOGIC_DOMAIN

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_domain

CM_TARGET_NAME

The name of the target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

ADMINISTRATIONPORTENABLED

WebLogic administration port

PRODUCTIONMODEENABLED

WebLogic server production mode status

EXALOGIC_OPT_ENABLED

Exalogic optimizations enabled status

NAME

Name of the WebLogic domain

DOMAINVERSION

Version of the WebLogic domain

13.4.2 MGMT$WEBLOGIC_OPSSSYSPROP

The MGMT$WEBLOGIC_OPSSSYSPROP view displays general information about the Oracle Platform Security Services (OPSS) System Properties.

Table 13-42 MGMT$WEBLOGIC_OPSSSYSPROP

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_domain

CM_TARGET_NAME

The name of target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

COMBINER_LAZYEVAL

Enables or disables the evaluation of a subject protection domain when check permission is triggered. Default value: FALSE

COMBINER_OPTIMIZE

Enables or disables the caching of a subject protection domain. Default value: FALSE

AUTHORIZATION

Enables or disables the delegation of calls to JDK API AccessController.checkPermission, which reduces runtime and debugging overhead. Default value: FALSE

HYBRID_MODE

Enables or disables the hybrid mode. The hybrid mode is used to facilitate the transition from the Sun java.security.Policy to the OPSS Java PolicyProvider. Default value: TRUE

13.4.3 MGMT$WEBLOGIC_OAMCONFIG

Each row in the MGMT$WEBLOGIC_OAMCONFIG view represents configuration data of Oracle Access Manager (OAM) configured for the WebLogic domain.

Table 13-43 MGMT$WEBLOGIC_OAMCONFIG

Column

Description

ECM_SNAPSHOT_ID

GUID of the snapshot

PORT

Provides the value of the port where OAM is deployed

HOSTNAME

Provides the name of the host where OAM is deployed

13.5 Oracle WebLogic Cluster View

This section provides a description of the Oracle WebLogic cluster view, MGMT$WEBLOGIC_CLUSTER, and its columns.

13.5.1 MGMT$WEBLOGIC_CLUSTER

The MGMT$WEBLOGIC_CLUSTER view displays general information about the WebLogic cluster configuration.

Table 13-44 MGMT$WEBLOGIC_CLUSTER

Column

Description

CM_TARGET_GUID

The unique global identifier (GUID) for the target

CM_TARGET_TYPE

The type of target: weblogic_cluster

CM_TARGET_NAME

The name of target in Enterprise Manager

LAST_COLLECTION_TIMESTAMP

The date and time when the metrics were collected

ECM_SNAPSHOT_ID

GUID of the snapshot

SESS_LAZY_DESER_ENABLED

Session lazy deserialization enabled

CLUSTER_ADDRESS

Cluster address

CLUSTER_BROADCAST_CHANNEL

Cluster broadcast channel

DEFAULT_LOAD_ALGO

Default load algorithm

CLUSTER_MESSAGING_MODE

Cluster messaging mode

CLUSTER_TYPE

Cluster type

REPLICATION_CHANNEL

Replication channel

14 Monitoring Views

This chapter provides a description of each monitoring view and its columns. It contains the following sections:

- MGMT$ALERT_CURRENT

- MGMT$TARGET_METRIC_COLLECTIONS

- MGMT$TARGET_METRIC_SETTINGS

- MGMT$AVAILABILITY_CURRENT

- MGMT$AVAILABILITY_HISTORY

- MGMT$ALERT_HISTORY

- MGMT$AVAIL_ALERT_HISTORY

- MGMT$METRIC_DETAILS

- MGMT$METRIC_CURRENT

- MGMT$METRIC_HOURLY

- MGMT$METRIC_DAILY

For examples of how to use views, see Chapter 20, "Examples".

14.1 MGMT$ALERT_CURRENT

MGMT$ALERT_CURRENT displays current information for any alerts that are logged in the Management Repository that are in a non-clear state. Only the most recent open alert in a non-clear status for a given metric is displayed through this view.

Table 14-1 MGMT$ALERT_CURRENT

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

VIOLATION_GUID

Unique identifier for the alert

METRIC_NAME

Name of the metric being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.For example, if this table describing the MGMT$TARGET_TYPE view was being defined as a table metric, Column Name, Data Type, and Description would be metric columns.

METRIC_LABEL

An intuitive display name for the metric that is being defined

COLUMN_LABEL

For table metrics, the column label contains an intuitive display name for the metric column

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

COLLECTION_ TIMESTAMP

The date-time when the alert condition was detected by the Management Agent

ALERT_STATE

A user readable description of the internal alert code that is sent from the Management Agent to identify the state of the alert condition. A alert record is transferred to the repository from the Management Agent each time the metric threshold is crossed in either direction, or if the Management Agent is restarted. The value of this column will contain one of the following strings:

- Warning

- Critical

If the metric's alert condition goes into a clear state, it will no longer be visible from this view.

VIOLATION_TYPE

A user readable description of the type of violation. Possible values are:

- Threshold Violation, when the alert is triggered based on a metric threshold

- Availability, when the alert is triggered for an availability metric

- Policy Violation, when the alert is triggered based on a policy violation

MESSAGE

An optional message that is generated when the alert is created that provides additional information about the alert condition

MESSAGE_NLSID

The NLSID of the alert message

MESSAGE_PARAMS

Contains the URL encoded parameters separated by "&" to be used to format the alert message

ACTION_MESSAGE

Suggested action message in English for this alert

ACTION_MESSAGE_NLSID

The NLS ID of the action message

ACTION_MESSAGE_PARAMS

Contains the URL encoded parameters for translating action message

TYPE_DISPLAY_NAME

The display name of the target type

Usage Notes

- List the current alerts that are in a non-clear state for a metric, set of metrics, or for a managed target. If the user is only interested in non-clear alerts, counts or selects, using this view provide better performance than using the MGMT$ALERT_DETAILS view.

- Access to this view will use an index if the query references the member target name, target type, metric name, and metric column or a subset of these columns if they are included as listed above from left to right.

14.2 MGMT$TARGET_METRIC_COLLECTIONS

The MGMT$TARGET_METRIC_COLLECTIONS view displays information about the metric collections.

Table 14-2 MGMT$TARGET_METRIC_COLLECTIONS

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

Unique global identifier (GUID) for the target

METRIC_NAME

Name of the metric being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.

For example, if the table describing the MGMT$TARGET_TYPE view is defined as a table metric, then Column Name, Data Type, and Description would be metric columns.

METRIC_GUID

Unique global identifier (GUID) for the metric. This ID can be used to associate metric information with metric data information during reporting.

COLLECTION_NAME

The name of the collection

IS_ENABLED

Indicates whether the collection is currently enabled

- 0=not enabled

- 1=enabled

IS_REPOSITORY

Indicates whether this is a repository-side collection. A repository-side collection has a PL/SQL evaluation procedure that is responsible for calculating the metric values.

FREQUENCY_CODE

The metric collection frequency type. Possible values are:

- 1: One Time

- 2: Interval

- 3: Daily

- 4: Weekly

- 5: Monthly

- 6: Yearly

- 7: On Demand

COLLECTION_FREQUENCY

Frequency of the metric collection. Value displayed is dependent on the frequency code:

- For One Time, the start date-time is stored in DD-MON-YY HH24:MI format.

- For Interval type, the frequency in minutes is stored.

- For Daily/Weekly/Monthly/Yearly types, the hour and minute of collection is stored in HH24:MI format.

- For On-Demand type, On-Demand is stored.

UPLOAD_POLICY

The frequency with which the metric data is uploaded or stored

Usage Notes

List the metric collections for a given target.

14.3 MGMT$TARGET_METRIC_SETTINGS

The MGMT$TARGET_METRIC_SETTINGS view displays information about the current metric setting stored for all targets in the Management Repository. This view provides information for both Management Agent-side and Management Repository-side metrics.

Table 14-3 MGMT$TARGET_METRIC_SETTINGS

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier (GUID) for the target

METRIC_NAME

Name of the metric being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.For example, if the table describing the MGMT$TARGET_TYPE view is defined as a table metric, then Column Name, Data Type, and Description would be metric columns.

METRIC_GUID

The unique global identifier for the metric. This ID can be used to associate metric information with metric data information during reporting.

COLLECTION_NAME

The name of the collection

CATEGORY

The name of the category the metricRefer to MGMT$METRIC_CATEGORIES for the list of all metric categories.

KEY_VALUE

The key value of the metric setting. For composite keys, this is the first part of the key.If the thresholds are not for a table metric, or the thresholds apply for all rows in the metric column, then the value in this column will contain a single space.

KEY_VALUE2

For composite keys, this is the  second part of the key

KEY_VALUE3

For composite keys, this is the  third part of the key

KEY_VALUE4

For composite keys, this is the  fourth part of the key

KEY_VALUE5

For composite keys, this is the  fifth part of the key

KEY_OPERATOR

Specifies whether the key_value columns have any SQL wildcards.For single key column metrics, the value is 1 if the key_value has wildcard characters, 0 otherwise.For metrics with multiple keys, a list of operators for all key columns will be stored here. For example, a metric with 3 keys (k1, k2, k3) where K1 and K2 use wildcards and K3 uses exact match, then 011 is stored in this column.

HAS_ACTIVE_BASELINE

The is a flag that specifies that the metric rows with this key_value has an active baseline and any user updates to thresholds or parameter values should be ignored.

PREVENT_OVERRIDE

The is a flag that specifies that the metric rows with this key_value has a template override flag. Once the template override flag is ON, any template application will not update the threshold or parameter values.

WARNING_OPERATOR

Defines the warning threshold condition to be applied

- 0 - GT

- 1 - EQ

- 2 - LT

- 3 - LE

- 4 - GE

- 5 - CONTAINS

- 6 - NE

- 7 - MATCH : regular expression

WARNING_THRESHOLD

The warning threshold value

CRITICAL_OPERATOR

Defines the critical threshold condition to be applied

- 0 - GT

- 1 - EQ

- 2 - LT

- 3 - LE

- 4 - GE

- 5 - CONTAINS

- 6 - NE

- 7 - MATCH : regular expression

CRITICAL_THRESHOLD

The critical threshold value

OCCURRENCE_COUNT

The number of times the test has to trigger to raise a violation

WARNING_ACTION_TYPE

Specifies the job type of the warning corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

WARNING_ACTION_JOB_OWNER

Specifies the job owner of the warning corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

WARNING_ACTION_JOB_NAME

Specifies the job name of the warning corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

CRITICAL_ACTION_TYPE

The critical corrective action type configured. Possible values are:

- No-Action: when no action is configured

- Corrective-Action: when a repository side corrective action is configured

- Agent-Fixit Job: when an Agent side fix-it job is configured.

CRITICAL_ACTION_JOB_TYPE

Specifies the job type of the critical corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

CRITICAL_ACTION_JOB_OWNER

Specifies the job owner of the critical corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

CRITICAL_ACTION_JOB_NAME

Specifies the job name of the critical corrective action when WARNING_ACTION_TYPE is ”Corrective-Action”

Usage Notes

- List all the metric setting for a given target.

- List the metric settings for a given target and metric.

- List the corrective actions assigned for a given target-metric.

14.4 MGMT$AVAILABILITY_CURRENT

The MGMT$AVAILABILITY_CURRENT view displays information about the most recent target availability information stored in the Management Repository.

Table 14-4 MGMT$AVAILABILITY_CURRENT

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

START_TIMESTAMP

The time when the target availability status change was first detected

AVAILABILITY_STATUS

Current target availability status. This column contains one of the following values:

- Target Down

- Target Up

- Metric Error

- Agent Down

- Unreachable

- Blackout

- Pending/Unknown

AVAILABILITY_STATUS_CODE

Status code corresponding to the availability status.

- 0 - Target Down

- 1 - Target Up

- 2 - Metric Error

- 3 - Agent Down

- 4 - Unreachable

- 5 - Blackout

- 6 - Pending/Unknown

TYPE_DISPLAY_NAME

The name of the target type as shown in the UI.

Usage Notes

Get the current availability status of a given target.

14.5 MGMT$AVAILABILITY_HISTORY

The MGMT$AVAILABILITY_HISTORY view displays detailed historical information about changes in the availability status for a target over time.

Table 14-5 MGMT$AVAILABILITY_HISTORY

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

START_TIMESTAMP

The time when the target availability status change was first detected

END_TIMESTAMP

The time when the target availability status change was last detected

AVAILABILITY_STATUS

Target availability status. This column will contain one of the following values:

- Target Down

- Target Up

- Metric Error

- Agent Down

- Unreachable

- Blackout

- Pending/Unknown

Usage Notes

Access to this view will use an index if the query references the member TARGET_ NAME, TARGET_TYPE and the START_TIMESTAMP.

14.6 MGMT$ALERT_HISTORY

The MGMT$ALERT_HISTORY view displays historical information for any alerts that are logged in the Management Repository.

Table 14-6 MGMT$ALERT_HISTORY

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

VIOLATION_GUID

Unique identifier for the alert

METRIC_NAME

Name of the metric being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.

For example, if this table describing the MGMT$TARGET_TYPE view was being defined as a table metric, Column Name, Data Type, and Description would be metric columns.

METRIC_LABEL

An intuitive display name for the metric that is being defined

COLUMN_LABEL

For table metrics, the column label contains an intuitive display name for the metric column

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key.

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

COLLECTION_ TIMESTAMP

The date-time when the alert condition was detected by the Management Agent

ALERT_STATE

A user readable description of the internal alert code that is sent from the Management Agent to identify the state of the alert condition. A alert record is transferred to the repository from the Management Agent each time the metric threshold is crossed in either direction, or if the Management Agent is restarted. The value of this column will contain one of the following strings:

- Warning

- Critical

If the metric's alert condition goes into a clear state, it will no longer be visible from this view.

ALERT_DURATION

The time, in hours, from when the alert condition was first detected until it was cleared

MESSAGE

An optional message that is generated when the alert is created that provides additional information about the alert condition

MESSAGE_NLSID

The NLSID of the alert message

MESSAGE_PARAMS

Contains the URL encoded parameters separated by "&" to be used to format the alert message

ACTION_MESSAGE

Suggested action message in English for this alert

ACTION_MESSAGE_NLSID

The NLS ID of the action message

ACTION_MESSAGE_PARAMS

Contains the URL encoded parameters for translating action message

VIOLATION_TYPE

An intuitive description of the type of violation. Possible values are:

- Threshold Violation: When the alert is triggered based on a metric threshold

- Availability: When the alert is triggered for an availability metric

- Policy Violation: When the alert is triggered based on a policy violation

TYPE_DISPLAY_NAME

The display name of the target type

14.7 MGMT$AVAIL_ALERT_HISTORY

The MGMT$AVAIL_ALERT_HISTORY view displays historical information for response alerts that are logged in the Management Repository.

Table 14-7 MGMT$AVAIL_ALERT_HISTORY

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier of the target

VIOLATION_GUID

The unique identifier of the violation.

VIOLATION_LEVEL

The priority level of the violation, such as:

- 15: clear

- 20: warning

- 25: alert

CYCLE_GUID

Violation GUID of the first violation in the severity life cycle.

METRIC_NAME

An intuitive display name for the metric that is being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, then the value in this column is a single space.

METRIC_GUID

The unique global identifier for the metric column

METRIC_LABEL

User display name of the metric

COLUMN_LABEL

For table metrics, the column label contains an intuitive displayname for the metric column

COLLECTION_TIMESTAMP

The date-time when the alert condition was detected by the Management Agent

ALERT_STATE

A user readable description of the internal alert code that is sent from the Management Agent to identify the state of the alert condition. A alert record is transferred to the repository from the Management Agent each time the metric threshold is crossed in either direction, or if the Management Agent is restarted. The value of this column will contain one of the following strings:

- Warning

- Critical

ALERT_DURATION

The time, in hours, from when the alert condition was first detected until it was cleared

MESSAGE

An optional message that is generated when the alert is created that provides additional information about the alert condition

MESSAGE_NLSID

The NLSID of the alert message

MESSAGE_PARAMS

Contains the URL encoded parameters separated by "&" to be used to format the alert message

ACTION_MESSAGE

Suggested action message in English for this alert

ACTION_MESSAGE_NLSID

The NLS ID of the action message

ACTION_MESSAGE_PARAMS

Contains the URL encoded parameters for translating action message

VIOLATION_TYPE

An intuitive description of the type of violation. Possible values are:

- Threshold Violation: When the alert is triggered based on a metric threshold

- Availability: When the alert is triggered for an availability metric

- Policy Violation: When the alert is triggered based on a policy violation

TYPE_DISPLAY_NAME

The display name of the target type

14.8 MGMT$METRIC_DETAILS

The MGMT$METRIC_DETAILS view displays a rolling 7 day window of individual metric samples. These are the metric values for the most recent sample that has been loaded into the Management Repository plus any earlier samples that have not been aggregated into hourly statistics.

Table 14-8 MGMT$METRIC_DETAILS

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

METRIC_NAME

Name of the metric being defined

METRIC_TYPE

A DECODE of the internal numeric type of the metric that is being defined. This column will contain one of the following values:

- Number

- String

- Table

- Raw

- External

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.For example, if this table describing the MGMT$TARGET_TYPE view was being defined as a table metric, Column Name, Data Type, and Description would be metric columns.

METRIC_LABEL

An intuitive display name for the metric that is being defined

COLUMN_LABEL

For table metrics, the column label contains an intuitive display name for the metric column

COLLECTION_ TIMESTAMP

The date-time when the alert condition was detected by the Management Agent

VALUE

Since current metric values can be a numeric or a string type, this column returns the value of the metric as a string. If the user of the view is restricting the query to numeric metric values, they can use the TO_NUMBER SQL function to return the values in numeric form.

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key.

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

Usage Notes

- Show the individual values for a metric over time.

- Identify time periods when abnormal samples for metric were collected.

- Calculate the correlation coefficient between two or more metrics.

- Provide metric values that are associated with an alert.

- Queries using this view will use an index if the queries use the target name, the target type, metric name. metric column, and key value, or if they are based upon the collection_timestamp.

14.9 MGMT$METRIC_CURRENT

The MGMT$METRIC_CURRENT view displays information on the most recent metric values that have been loaded into the Management Repository.

Table 14-9 MGMT$METRIC_CURRENT

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

METRIC_NAME

Name of the metric being defined

METRIC_TYPE

A DECODE of the internal numeric type of the metric that is being defined. This column will contain one of the following values:

- Number

- String

- Table

- Raw

- External

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.For example, if this table describing the MGMT$TARGET_TYPE view was being defined as a table metric, Column Name, Data Type, and Description would be metric columns.

METRIC_LABEL

An intuitive display name for the metric that is being defined

COLUMN_LABEL

For table metrics, the column label contains an intuitive display name for the metric column

COLLECTION_ TIMESTAMP

The date-time when the alert condition was detected by the Management Agent

VALUE

Since current metric values can be a numeric or a string type, this column returns the value of the metric as a string. If the user of the view is restricting the query to numeric metric values, they can use the TO_NUMBER SQL function to return the values in numeric form.

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key.

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

Usage Notes

- Retrieve the most recent value for a metric that is stored in the Management Repository.

- Retrieve the latest metrics for a target or metric for a specific time period.

- Queries using this view will use an index if the queries use target name, the target type, metric name. metric column, and key value, or if they are based upon the collection_timestamp.

14.10 MGMT$METRIC_HOURLY

The MGMT$METRIC_HOURLY view displays metric statistics information that have been aggregated from the individual metric samples into hourly time periods. For example, if a metric is collected every 15 minutes, the 1 hour rollup would aggregate the 4 samples into a single hourly value by averaging the 4 individual samples together. The current hour of statistics may not be immediately available from this view. The timeliness of the information provided from this view is dependent on when the query against the view was executed and when the hourly rollup table was last refreshed.

Table 14-10 MGMT$METRIC_HOURLY

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

METRIC_NAME

Name of the metric being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.For example, if this table describing the MGMT$TARGET_TYPE view was being defined as a table metric, Column Name, Data Type, and Description would be metric columns.

METRIC_LABEL

An intuitive display name for the metric that is being defined

COLUMN_LABEL

For table metrics, the column label contains an intuitive display name for the metric column

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

ROLLUP_TIMESTAMP

The rollup timestamp identifies the start of the rollup period. For the one-hour rollups, samples that fall within the hourly boundaries from minute 00 through minute 59 inclusive will be combined. For example, samples from 12:00 AM through 12:59 AM would be combined into a single aggregated record with a rollup timestamp of "date" 12:00 AM.

SAMPLE_COUNT

The number of non NULL samples for the metric that were aggregated

AVERAGE

The average of the metric values for the samples that have been included in the rollup period

MINIMUM

The minimum value for the metric for the samples that have been included in the rollup period

MAXIMUM

The maximum value for the metric for samples that have been included in the rollup period

STANDARD_DEVIATION

The standard deviation for the metric values that have been included in the rollup period

Usage Notes

- This view provides the best level of granularity to show changes in a metric's value over the course of a day.

- Identify hourly time periods when a metric or sets of metrics are maximized.

- Understand how the variability of a metric over a one hour time period.

- Identify the values of the collected metrics for a target when a particular hour has been identified as problematic.

- Queries using this view will use an index if the queries use the target_name, the metric_name, or if they are based upon the rollup_timestamp.

14.11 MGMT$METRIC_DAILY

The MGMT$METRIC_DAILY view displays metric statistics that have been aggregated from the samples collected over the previous twenty-four hour time period. The timeliness of the information provided from this view is dependent on when the query against the view was executed and when the hourly rollup table was last refreshed.

Table 14-11 MGMT$METRIC_DAILY

Column

Description

TARGET_NAME

Name of the target where the metric was collected. The target name uniquely identifies a managed target within the Management Repository. The target name typically contains the name of the managed entity that was provided by the system or database administrator.

TARGET_TYPE

The target type defines the set of metrics that are applicable for the target

TARGET_GUID

The unique global identifier for the target

METRIC_NAME

Name of the metric being defined

METRIC_COLUMN

For table metrics, the metric column contains the name of the column in the table that is being defined. If the metric that is being defined is not a table metric, the value in this column is a single space.For example, if this table describing the MGMT$TARGET_TYPE view was being defined as a table metric, Column Name, Data Type, and Description would be metric columns.

METRIC_LABEL

An intuitive display name for the metric that is being defined

COLUMN_LABEL

For table metrics, the column label contains an intuitive display name for the metric column

KEY_VALUE

The key value for which the alert has been recorded. For composite keys, this is the first part of the key

KEY_VALUE2

For composite keys, this is the second part of the key for which the alert has been recorded

KEY_VALUE3

For composite keys, this is the third part of the key for which the alert has been recorded

KEY_VALUE4

For composite keys, this is the fourth part of the key for which the alert has been recorded

KEY_VALUE5

For composite keys, this is the fifth part of the key for which the alert has been recorded

ROLLUP_TIMESTAMP

The rollup timestamp identifies the start of the rollup period. For the one-hour rollups, samples that fall within the hourly boundaries from minute 00 through minute 59 inclusive will be combined. For example, samples from 12:00 AM through 12:59 AM would be combined into a single aggregated record with a rollup timestamp of "date" 12:00 AM.

SAMPLE_COUNT

The number of non-NULL samples for the metric that were aggregated

AVERAGE

The average of the metric values for the samples that have been included in the rollup period

MINIMUM

The minimum value for the metric for the samples that have been included in the rollup period

MAXIMUM

The maximum value for the metric for samples that have been included in the rollup period

STANDARD_DEVIATION

The standard deviation for the metric values that have been included in the rollup period

Usage Notes

- This view provides the best granularity to show changes in a metric's value over the course of a week or month.

- Understand trends in metric values.

- Queries using this view will use an index if the queries use the target_name, the metric_name, or if they are based upon the rollup_timestamp.

15 Operating System Views

This chapter provides a description of each operating system view and its columns.It contains the following sections:

- MGMT$OS_SUMMARY

- MGMT$OS_COMPONENTS

- MGMT$OS_HW_SUMMARY

- MGMT$OS_PATCH_SUMMARY

- MGMT$OS_FS_MOUNT

- MGMT$OS_KERNEL_PARAMS

- MGMT$OS_PATCHES

- MGMT$OS_PROPERTIES

- MGMT$OS_MODULES

- MGMT$OS_LIMITS

- MGMT$OS_INIT_SERVICES

For examples of how to use views, see Chapter 20, "Examples".

15.1 MGMT$OS_SUMMARY

The MGMT$OS_SUMMARY view contains the summary of targets installed in the Oracle home directories.

Table 15-1 MGMT$OS_SUMMARY

Column

Description

VENDOR_NAME

The name of the vendor

BASE_VERSION

The OS base version

UPDATE_LEVEL

The OS update level

DISTRIBUTOR_VERSION

The OS distributor version

MAX_SWAP_SPACE_IN_MB

The maximum amount of swap space

SNAPSHOT_GUID

The globally unique identifier of the operating system snapshot

ADDRESS_LENGTH_IN_BITS

The OS address length in bits

TARGET_GUID

The globally unique identifier of the target

PLATFORM_ID

The platform ID of the host

TARGET_NAME

The name of the target

TARGET_TYPE

The type of the target

START_TIMESTAMP

The time when the target availability status change was first detected.

RUN_LEVEL

The run level of the operating system

DEFAULT_RUN_LEVEL

The default run level of the operating system

PLATFORM_VERSION_ID

The platform version ID number of the application system

DBM_MEMBER

Indicates whether the host is part of an Exadata configuration

EXALOGIC_MEMBER

Indicates whether the host is part of an Exalogic configuration

15.2 MGMT$OS_COMPONENTS

The MGMT$OS_COMPONENTS view returns performance information for host OS components.

Table 15-2 MGMT$OS_COMPONENTS

Column

Description

TARGET_NAME

The name of this target

COMPONENT_NAME

The name of the software component.

TARGET_TYPE

The type of target for this view

TARGET_GUID

The globally unique identifier for the target

SNAPSHOT_GUID

The globally unique identifier for the snapshot

START_TIMESTAMP

The date-time when the data was first collected

INSTALLATION_DATE

The installation date of the component

VERSION

The version of the component

DESCRIPTION

The description of the component

15.3 MGMT$OS_HW_SUMMARY

The MGMT$OS_HW_SUMMARY view displays summary information for both operating systems and hardware.

Table 15-3 MGMT$OS_HW_SUMMARY

Column

Description

TARGET_NAME

Type of the target for this metric

DOMAIN

The domain of the host

OS_NAME

The operating system name

SYSTEM_CONFIGURATION

A summary of the system configuration information

MACHINE_ARCHITECTURE

A summary of the system architecture

CLOCK_FREQUENCY_IN_MHZ

The clock frequency measured in MHz

MEMORY_SIZE_IN_MB

The memory size measured in MB

LOCAL_DISK_SPACE_IN_GB

The local disk space measured in GBs

CPU_COUNT

The number of CPUs

HARDWARE_VENDOR_NAME

The name of the hardware vendor

OS_VENDOR_NAME

The name of the system vendor

OS_DISTRIBUTOR_VERSION

The distribution version

SNAPSHOT_GUID

The globally unique identifier of the configuration snapshot

TARGET_GUID

The globally unique identifier of the target

PHYSICAL_CPU_COUNT

The number of physical CPUs

LOGICAL_CPU_COUNT

The number of logical CPUs

PLATFORM_ID

The identification number of the platform

TARGET_TYPE

The type of target

LAST_COLLECTION_TIMESTAMP

The date-time of the last collection

OS_RUN_LEVEL

The run level of the operating system

OS_DEFAULT_RUN_LEVEL

The default run level of the operating system

HOST_ID

The host ID number

OS_PLATFORM_VERSION_ID

The operating system platform version number

OS_DBM_MEMBER

Indicates whether the host is part of an Exadata configuration

OS_EXALOGIC_MEMBER

Indicates whether the host is part of an Exalogic configuration

VIRTUAL

The identification for the given host is virtual or physical

SYSTEM_SERIAL_NUMBER

The system serial number of the host

15.4 MGMT$OS_PATCH_SUMMARY

The MGMT$OS_PATCH_SUMMARY view provides a summary of the patches applied to the operating system.

Table 15-4 MGMT$OS_PATCH_SUMMARY

Column

Description

TARGET_NAME

Type of the target for this metric

VENDOR_NAME

The name of the vendor

BASE_VERSION

The base version of the operating system

UPDATE_LEVEL

The update level of the operating system

DISTRIBUTOR_VERSION

The distributor version of the OS

MAX_SWAP_SPACE_IN_MB

The maximum swap space measured in MB

SNAPSHOT_GUID

The globally unique identifier of the snapshot

NUM_PATCHES

The number of OS patches found

TARGET_GUID

The globally unique identifier of the target

TARGET_TYPE

The type of the target

START_TIMESTAMP

The date-time of the last collection

NAME

The name of the patch

15.5 MGMT$OS_FS_MOUNT

The MGMT$OS_FS_MOUNT view displays performance information for mounted file systems.

Table 15-5 MGMT$OS_FS_MOUNT

Column

Description

TARGET_TYPE

Type of the target for this metric

RESOURCE_NAME

The name of the mounted resource

TYPE

The file system mount

MOUNT_LOCATION

The mount location

MOUNT_OPTIONS

The mount options

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_GUID

The globally unique identifier of the target

START_TIMESTAMP

The date-time of the last collection

15.6 MGMT$OS_KERNEL_PARAMS

The MGMT$OS_KERNEL_PARAMS view returns a summary for operating system kernel parameters.

Table 15-6 MGMT$OS_KERNEL_PARAMS

Column

Description

TARGET_TYPE

Type of the target for this metric

TARGET_NAME

The name of this target

TARGET_GUID

The globally unique identifier of the target

VALUE

The value of the parameter

NAME

The name of the parameter

SOURCE

The source of the parameter

START_TIMESTAMP

The date-time of the last collection

HOST

The name of the host

15.7 MGMT$OS_PATCHES

The MGMT$OS_PATCHES view returns a summary of the operating system patches.

Table 15-7 MGMT$OS_PATCHES

Column

Description

TARGET_TYPE

The type of target

TARGET_NAME

The name of the target

TARGET_GUID

The globally unique identifier for the configuration target

START_TIMESTAMP

The time-date of the last collection

SNAPSHOT_GUID

The globally unique identifier of the snapshot

VENDOR_NAME

The name of the vendor

NAME

The name of the patch

15.8 MGMT$OS_PROPERTIES

The MGMT$OS_PROPERTIES view returns a summary of the operating system properties.

Table 15-8 MGMT$OS_PROPERTIES

Column

Description

TARGET_TYPE

Type of the target for this metric

TARGET_NAME

The name of the target

NAME

The name of the property

SOURCE

The source of the property

VALUE

The value of the property

SNAPSHOT_GUID

The globally unique identifier of the snapshot

START_TIMESTAMP

The date-time of the last collection

15.9 MGMT$OS_MODULES

The MGMT$OS_MODULES view returns a summary of the operating system module details.

Table 15-9 MGMT$OS_MODULES

Column

Description

TARGET_TYPE

Type of the target for this metric

NAME

The name of the module

SIZE_IN_BYTES

The size in bytes of the module

REFERRING_MODULES

The list of referring modules

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_NAME

The name of the target

START_TIMESTAMP

The date-time of the last collection

15.10 MGMT$OS_LIMITS

The MGMT$OS_LIMITS view returns a summary of operating system limit values

Table 15-10 MGMT$OS_LIMITS

Column

Description

TARGET_TYPE

Type of target for this metric

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_NAME

The target name

TARGET_GUID

The globally unique identifier of the target

START_TIMESTAMP

The date-time of the last collection

15.11 MGMT$OS_INIT_SERVICES

The MGMT$OS_INIT_SERVICES view returns a summary of operating system init service details.

Table 15-11 MGMT$OS_INIT_SERVICES

Column

Description

TARGET_TYPE

Type of target for this metric

TARGET_NAME

The name of the target

APPLICATION_ID

The application ID of the service

RUN_STATE

The run state of the service

MAPPER_VERSION

The mapper version of the service

SNAPSHOT_GUID

The globally unique identifier of the snapshot

TARGET_GUID

The globally unique identifier of the target

START_TIMESTAMP

The date-time of the last collection

16 Security Views

This chapter provides a description of each security view and its columns. It contains the following sections:

- MGMT$ESA_ALL_PRIVS_REPORT

- MGMT$ESA_ANY_DICT_REPORT

- MGMT$ESA_ANY_PRIV_REPORT

- MGMT$ESA_AUDIT_SYSTEM_REPORT

- MGMT$ESA_BECOME_USER_REPORT

- MGMT$ESA_CATALOG_REPORT

- MGMT$ESA_CONN_PRIV_REPORT

- MGMT$ESA_CREATE_PRIV_REPORT

- MGMT$ESA_DBA_GROUP_REPORT

- MGMT$ESA_DBA_ROLE_REPORT

- MGMT$ESA_DIRECT_PRIV_REPORT

- MGMT$ESA_EXMPT_ACCESS_REPORT

- MGMT$ESA_KEY_OBJECTS_REPORT

- MGMT$ESA_OH_OWNERSHIP_REPORT

- MGMT$ESA_OH_PERMISSION_REPORT

- MGMT$ESA_POWER_PRIV_REPORT

- MGMT$ESA_PUB_PRIV_REPORT

- MGMT$ESA_SYS_PUB_PKG_REPORT

- MGMT$ESA_TABSP_OWNERS_REPORT

- MGMT$ESA_TRC_AUD_PERM_REPORT

- MGMT$ESA_WITH_ADMIN_REPORT

- MGMT$ESA_WITH_GRANT_REPORT

- MGMT$ESM_COLLECTION_LATEST

- MGMT$ESM_FILE_SYSTEM_LATEST

- MGMT$ESM_PORTS_LATEST

- MGMT$ESM_SERVICE_LATEST

- MGMT$ESM_STACK_LATEST

For examples of how to use views, see Chapter 20, "Examples".

16.1 MGMT$ESA_ALL_PRIVS_REPORT

The MGMT$ESA_ALL_PRIVS_REPORT view displays a table containing users and roles that have the 'GRANT ANY PRIVILEGE' privilege in database security reports.

Table 16-1 MGMT$ESA_ALL_PRIVS_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or roles that have been granted this privilege (that is, GRANT ANY PRIVILEGE->DBA->SYS)

OBJECT_NAME

The name of the user that been granted the privilege (GRANT ANY PRIVILEGE)

16.2 MGMT$ESA_ANY_DICT_REPORT

The MGMT$ESA_ANY_DICT_REPORT view displays a table and a chart containing users and roles with access to any dictionary in database security reports.

Table 16-2 MGMT$ESA_ANY_DICT_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or roles that been granted this privilege. For example, SELECT ANY DICTIONARY->SCHEMA_OWNER_ROLE->SYS

OBJECT_NAME

The user that has been granted any of the ANY DICTIONARY privileges. For example, SELECT ANY DICTIONARY, ANALYZE ANY DICTIONARY, and so on.

16.3 MGMT$ESA_ANY_PRIV_REPORT

The MGMT$ESA_ANY_PRIV_REPORT view displays a table and a chart containing users with 'ANY' in some privilege granted to them in database security reports.

Table 16-3 MGMT$ESA_ANY_PRIV_REPORT

COLUMN

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted a privilege having 'ANY'. For example, BACKUP ANY TABLE->EXP_FULL_DATABASE->DATAPUMP_EXP_FULL_DATABASE->SYS

OBJECT_NAME

The user that has been granted one of the ANY privileges. For example, ALTER ANY MATERIALIZED VIEW, ALTER ANY INDEX, BACKUP ANY TABLE, and so on.

16.4 MGMT$ESA_AUDIT_SYSTEM_REPORT

The MGMT$ESA_AUDIT_SYSTEM_REPORT view displays a table containing users and roles with the 'AUDIT SYSTEM' privilege in database security reports.

Table 16-4 MGMT$ESA_AUDIT_SYSTEM_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted 'AUDIT SYSTEM' privilege. For example, AUDIT SYSTEM->SYS, AUDIT SYSTEM->IMP_FULL_DATABASE->DATAPUMP_IMP_FULL_DATABASE->DBA->SYSTEM, and so on.

OBJECT_NAME

The user that has been granted 'ALTER SYSTEM' privilege

16.5 MGMT$ESA_BECOME_USER_REPORT

The MGMT$ESA_BECOME_USER_REPORT view displays a table containing users and roles with the 'BECOME USER' privilege in database security reports.

Table 16-5 MGMT$ESA_BECOME_USER_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted 'BECOME USER' privilege. For example, BECOME USER->SYS, BECOME USER->DBA->SYSTEM, BECOME USER->IMP_FULL_DATABASE->DATAPUMP_IMP_FULL_DATABASE->DBA->BAM, and so on.

OBJECT_NAME

The user that has been granted the 'BECOME USER' privilege

16.6 MGMT$ESA_CATALOG_REPORT

The MGMT$ESA_CATALOG_REPORT view displays a table and a chart containing all the users that have a role such as '%CATALOG%' in database security reports.

Table 16-6 MGMT$ESA_CATALOG_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted a role like '%CATALOG%'. For example, RECOVERY_CATALOG_OWNER->SYS, EXECUTE_CATALOG_ROLE->TBLO_ROLE->CRM, and so on.

OBJECT_NAME

User that has been granted one of the 'CATALOG' privileges. For example, SELECT_CATALOG_ROLE, EXECUTE_CATALOG_ROLE, DELETE_CATALOG_ROLE, and so on.

16.7 MGMT$ESA_CONN_PRIV_REPORT

The MGMT$ESA_CONN_PRIV_REPORT view displays a table and a chart containing users and roles with the CONNECT or RESOURCE role in database security reports.

Table 16-7 MGMT$ESA_CONN_PRIV_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted  the CONNECT or RESOURCE role

OBJECT_NAME

The role if granted directly, or the role through it has been granted

16.8 MGMT$ESA_CREATE_PRIV_REPORT

The MGMT$ESA_CREATE_PRIV_REPORT view displays a table and a chart containing users and roles with the CREATE privilege in database security reports.

Table 16-8 MGMT$ESA_CREATE_PRIV_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted  the privilege to create an object in the database. For example, CREATE ANY CONTEXT->SYS, CREATE ANY INDEX->OLAP_DBA->OLAPSYS, and so on.

OBJECT_NAME

User that has been granted one of the 'CREATE' privileges

16.9 MGMT$ESA_DBA_GROUP_REPORT

The MGMT$ESA_DBA_GROUP_REPORT view displays a table containing members of the operating system user group DBA in database security reports.

Table 16-9 MGMT$ESA_DBA_GROUP_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The operating system user which  is in the user group DBA.

OBJECT_NAME

DBA Group

16.10 MGMT$ESA_DBA_ROLE_REPORT

The MGMT$ESA_DBA_ROLE_REPORT view displays a table containing users and roles with the DBA role granted to them in database security reports.

Table 16-10 MGMT$ESA_DBA_ROLE_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted the DBA role

OBJECT_NAME

User that has been granted the DBA role

16.11 MGMT$ESA_DIRECT_PRIV_REPORT

The MGMT$ESA_DIRECT_PRIV_REPORT view displays a table and a chart containing privileges granted directly in database security reports.

Table 16-11 MGMT$ESA_DIRECT_PRIV_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

User which has been granted a privilege directly i.e. not via a role

OBJECT_NAME

The privilege that has been granted directly. For example, ALTER SESSION, SELECT ANY DICTIONARY, and so on.

16.12 MGMT$ESA_EXMPT_ACCESS_REPORT

The MGMT$ESA_EXMPT_ACCESS_REPORT view displays a table containing users and roles with the EXEMPT ACCESS POLICY privilege in database security reports.

Table 16-12 MGMT$ESA_EXMPT_ACCESS_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted the 'EXEMPT ACCESS POLICY' privilege

OBJECT_NAME

User that has been granted one of the 'EXEMPT ACCESS POLICY' privilege

16.13 MGMT$ESA_KEY_OBJECTS_REPORT

The MGMT$ESA_KEY_OBJECTS_REPORT view displays a table and a chart containing users and roles with access to key objects in database security reports.

Table 16-13 MGMT$ESA_KEY_OBJECTS_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

USER

The user which has access to key objects

OBJECT_NAME

The key object to which that use has access. For example, View DBA_USERS, Table SOURCE$, Table USER$

PRIVILEGE

The privilege on the key object that has been granted to the user. For example, SELECT, DELETE, and so on.

16.14 MGMT$ESA_OH_OWNERSHIP_REPORT

The MGMT$ESA_OH_OWNERSHIP_REPORT view displays a table containing file ownership by Oracle home in database security reports.

Table 16-14 MGMT$ESA_OH_OWNERSHIP_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The file  whose owner is not the ORACLE HOME owner

OBJECT_NAME

The owner of the file

16.15 MGMT$ESA_OH_PERMISSION_REPORT

The MGMT$ESA_OH_PERMISSION_REPORT view displays a table containing file permissions by Oracle home in database security reports.

Table 16-15 MGMT$ESA_OH_PERMISSION_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The file that has an insecure permission

OBJECT_NAME

The permission of the file

16.16 MGMT$ESA_POWER_PRIV_REPORT

The MGMT$ESA_POWER_PRIV_REPORT view displays a table and a chart containing all the users and roles with ALTER SESSION, ALTER SYSTEM, CREATE PROCEDURE or CREATE LIBRARY privileges in database security reports.

Table 16-16 MGMT$ESA_POWER_PRIV_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user that has powerful privileges

OBJECT_NAME

The powerful privilege held by the user

16.17 MGMT$ESA_PUB_PRIV_REPORT

The MGMT$ESA_PUB_PRIV_REPORT view displays a table and a chart containing privileges granted to PUBLIC in database security reports.

Table 16-17 MGMT$ESA_PUB_PRIV_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The object on which some privilege has been granted to PUBLIC

OBJECT_NAME

The privilege on the object which has been granted to PUBLIC. For example, SELECT, EXECUTE, and so on.

16.18 MGMT$ESA_SYS_PUB_PKG_REPORT

The MGMT$ESA_SYS_PUB_PKG_REPORT view displays a table containing system packages with public execute privileges in database security reports.

Table 16-18 MGMT$ESA_SYS_PUB_PKG_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

PUBLIC

OBJECT_NAME

The package owned by SYS on which PUBLIC has execute privileges

16.19 MGMT$ESA_TABSP_OWNERS_REPORT

The MGMT$ESA_TABSP_OWNERS_REPORT view displays a table containing tablespaces and their owners in database security reports.

Table 16-19 MGMT$ESA_TABSP_OWNERS_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The tablespace

OBJECT_NAME

The owner of the tablespace

16.20 MGMT$ESA_TRC_AUD_PERM_REPORT

The MGMT$ESA_TRC_AUD_PERM_REPORT view displays a table containing trace and audit files permissions in database security reports.

Table 16-20 MGMT$ESA_TRC_AUD_PERM_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The file path

OBJECT_NAME

The purpose of the file. For example, audit file destination, background dump destination, core dump destination, user dump destination, and so on.

PERMISSION

Permission of the file

16.21 MGMT$ESA_WITH_ADMIN_REPORT

The MGMT$ESA_WITH_ADMIN_REPORT view displays a table and a chart containing users and roles having some privileges granted to them with the WITH ADMIN option in database security reports.

Table 16-21 MGMT$ESA_WITH_ADMIN_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted a privilege 'WITH ADMIN' option

OBJECT_NAME

The privilege which has been granted 'WITH ADMIN' option

16.22 MGMT$ESA_WITH_GRANT_REPORT

The MGMT$ESA_WITH_GRANT_REPORT view displays a table and a chart containing users and roles having some privileges granted to them with 'WITH GRANT' option in database security reports.

Table 16-22 MGMT$ESA_WITH_GRANT_REPORT

Column

Description

TARGET_GUID

The GUID of the target for which the report has the data

TARGET_NAME

The name of the target for which the report has the data

PRINCIPAL

The user or role which has been granted a privilege 'WITH GRANT' option

OBJECT_NAME

The privilege which has been granted 'WITH GRANT' option

16.23 MGMT$ESM_COLLECTION_LATEST

The MGMT$ESM_COLLECTION_LATEST view contains properties relating to security for database targets.

Table 16-23 MGMT$ESM_COLLECTION_LATEST

Column

Description

TARGET_GUID

The GUID of the database target

PROPERTY

Name of the attribute

VALUE

Value of the attribute

VALUE2

Used to capture additional values of the attribute

16.24 MGMT$ESM_FILE_SYSTEM_LATEST

The MGMT$ESM_FILE_SYSTEM_LATEST view contains the file system type for the Windows host targets.

Table 16-24 MGMT$ESM_FILE_SYSTEM_LATEST

Column

Description

TARGET_GUID

The GUID of the Windows host target

FILE_SYSTEM

The type of file system

16.25 MGMT$ESM_PORTS_LATEST

The MGMT$ESM_PORTS_LATEST view contains the open ports for the host target.

Table 16-25 MGMT$ESM_PORTS_LATEST

Column

Description

TARGET_GUID

The GUID of the host target

PORT

The value of the open port (listening mode)

16.26 MGMT$ESM_SERVICE_LATEST

The MGMT$ESM_SERVICE_LATEST view contains the insecure services running on the host targets.

Table 16-26 MGMT$ESM_SERVICE_LATEST

Column

Description

TARGET_GUID

The GUID of the host target

SERVICE

The port value for the service

16.27 MGMT$ESM_STACK_LATEST

The MGMT$ESM_STACK_LATEST view contains executable stack status host targets.

Table 16-27 MGMT$ESM_STACK_LATEST

Column

Description

TARGET_GUID

The GUID of the host target

EXE_STACK

The status of the executable stack

17 Storage Reporting Views

This chapter provides a description of each storage reporting view and its columns. It contains the following sections:

- MGMT$STORAGE_REPORT_DATA

- MGMT$STORAGE_REPORT_KEYS

- MGMT$STORAGE_REPORT_PATHS

- MGMT$STORAGE_REPORT_ISSUES

- MGMT$STORAGE_REPORT_DISK

- MGMT$STORAGE_REPORT_VOLUME

- MGMT$STORAGE_REPORT_LOCALFS

- MGMT$STORAGE_REPORT_NFS

For examples of how to use views, see Chapter 20, "Examples".

17.1 MGMT$STORAGE_REPORT_DATA

The MGMT$STORAGE_REPORT_DATA view displays the Storage Data metric attributes which are common across all instrumented Storage Entities.

Table 17-1 MGMT$STORAGE_REPORT_DATA

Column

Description

TARGET_NAME

Target Name in Enterprise Manager

TARGET_TYPE

Target Type in Enterprise Manager

KEY_VALUE

Unique Key Value for the Storage Entity

GLOBAL_UNIQUE_ID

A globally unique persistent identifier for a storage entity. All instances of a shared Storage Entity will have the same global_unique_identifier

NAME

Name of the storage entity

STORAGE_LAYER

Storage layer of the storage entity.

Sample Usage:

- OS_DISK

- VOLUME_MANAGER

- LOCAL_FILESYSTEM

- NFS

ENTITY_TYPE

Indicates the type of Entity. Value is vendor specific.

Example: Plex, Sub Disk, Diskgroup, Volume group, Metadevice and so on.

RAWSIZEB

Total space in bytes

SIZEB

Size in bytes

USEDB

Used size in bytes

FREEB

Free size in bytes

17.2 MGMT$STORAGE_REPORT_KEYS

The MGMT$STORAGE_REPORT_KEYS view displays the relationship between instrumented Storage Entities.

Table 17-2 MGMT$STORAGE_REPORT_KEYS

Column

Description

TARGET_NAME

Target Name in Enterprise Manager

TARGET_TYPE

Target type in Enterprise Manager

KEY_VALUE

Unique KEY_VALUE for the storage entity

PARENT_KEY_VALUE

Key value for the parent storage entity.

17.3 MGMT$STORAGE_REPORT_PATHS

The MGMT$STORAGE_REPORT_PATHS view displays the OS paths for all instrumented storage entities.

Table 17-3 MGMT$STORAGE_REPORT_PATHS

Column

Description

TARGET_NAME

Target name in Enterprise Manager

TARGET_TYPE

Target type in Enterprise Manager

KEY_VALUE

Unique key value for the storage entity

NAME

Name of the storage entity

PATH

OS path to the storage entity

FILE_TYPE

Type of file

Examples:

- _BLOCKSPECIAL

- _DIRECTORY

- _REGULAR

STORAGE_LAYER

Storage layer of the storage entity.

Sample Usage:

- OS_DISK

- VOLUME_MANAGER

- LOCAL_FILESYSTEM

- NFS

ENTITY_TYPE

Indicates the type of entity. Value is vendor-specific.

Examples: Plex, Sub Disk, Diskgroup, Volume group, Metadevice, and so on.

17.4 MGMT$STORAGE_REPORT_ISSUES

The MGMT$STORAGE_REPORT_ISSUES view displays the consistency issues encountered when analyzing the instrumented storage metrics.

Table 17-4 MGMT$STORAGE_REPORT_ISSUES

Column

Description

TARGET_NAME

Target name in Enterprise Manager

TARGET_TYPE

Target type in Enterprise Manager

TYPE

Type of inconsistency. Value can be:

- MAPPING_ISSUE

- MAPPING_WARNING

MESSAGE_COUNT

Count of the number of messages

17.5 MGMT$STORAGE_REPORT_DISK

The MGMT$STORAGE_REPORT_DISK view displays Additional Storage Data Metric Attributes for all physical disk device storage entities.

Table 17-5 MGMT$STORAGE_REPORT_DISK

Column

Description

TARGET_NAME

Target name in Enterprise Manager

TARGET_TYPE

Target type in Enterprise Manager

ENTITY_TYPE

Indicates the type of disk device such as disk or disk partition

USED_PATH

The OS path to the disk or partition. If the disk or partition is allocated, then this is the path that is in use.

FILE_TYPE

Type of file

Examples:- _BLOCKSPECIAL- _REGULAR

SIZEB

Size in bytes

USEDB

Used size in bytes

FREEB

Free size in bytes

VENDOR

Name of the disk vendor; detected through SCSI enquiry

PRODUCT

Product family from the vendor; detected through SCSI enquiry

17.6 MGMT$STORAGE_REPORT_VOLUME

The MGMT$STORAGE_REPORT_VOLUME view displays Additional Storage Data Metric attributes for all volume manager storage entities.

Table 17-6 MGMT$STORAGE_REPORT_VOLUME

Column

Description

TARGET_NAME

Target name in Enterprise Manager

TARGET_TYPE

Target type in Enterprise Manager

VENDOR

Vendor name of the volume or software raid manager

PRODUCT

Vendor name of the volume or software raid manager

TYPE

Indicates the type of volume entity. It can be vendor specific.

For example, in the case of Veritas Volume Manager for Volume, Plex, VM Disk, Diskgroup, Sub Disk, Metadevice, Metadevice Partition, Array, Raiddevice, Submirror, Diskset, Slice, raid-disk, spare-disk, Hot spare, and so on.

DISK_GROUP

Disk group or volume group name

NAME

The name of the entity in the volume manager namespace

USED_PATH

The OS path to the device. If the device is allocated, then this is the path that is in use.

FILE_TYPE

Type of file

Examples:- _BLOCKSPECIAL- _REGULAR

RAWSIZEB

In bytes.

For a 2-way mirrored Veritas Volume. It is the sum of the size of each plex.

SIZEB

Size in bytes

USEDB

Used size in bytes

FREEB

Free size in bytes

CONFIGURATION

A string describing the configuration of the volume.

17.7 MGMT$STORAGE_REPORT_LOCALFS

The MGMT$STORAGE_REPORT_LOCALFS view displays Additional Storage Data Metric attributes for all local file system storage entities.

Table 17-7 MGMT$STORAGE_REPORT_LOCALFS

Column

Description

TARGET_NAME

Target name in Enterprise Manager

TARGET_TYPE

Target type in Enterprise Manager

FILESYSTEM_TYPE

The type of file system

FILESYSTEM

The file system path on the operating system

MOUNTPOINT

The mount point path on the operating system

SIZEB

Number

USEDB

Used size in bytes

FREEB

Free size in bytes

17.8 MGMT$STORAGE_REPORT_NFS

The MGMT$STORAGE_REPORT_NFS view displays Additional Storage Data Metric attributes for all network file systems.

Table 17-8 MGMT$STORAGE_REPORT_NFS

Column

Description

TARGET_NAME

Target name in Enterprise Manager

TARGET_TYPE

Target type in Enterprise Manager

FILESYSTEM

The file system name as seen on the operating system. For NFS file systems the file system name should be in the format nfs_server:/filesystem_name

MOUNTPOINT

The mountpoint path on the operating system

SIZEB

Size in bytes

USEDB

Used size in bytes,

FREEB

Free size in bytes

NFS_SERVER

The server name for the NFS Server

NFS_SERVER_IP_ADDRESS

The IP address of the NFS Server

NFS_VENDOR

The NFS Server vendor

MOUNT_PRIVILEGE

This is the mount privilege of the file system

Possible values:

- Read

- Write

18 Target Views

This chapter provides a description of each target view and its columns. It contains the following sections:

- MGMT$AGENTS_MONITORING_TARGETS

- MGMT$EM_ECM_MOS_PROPERTIES

- MGMT$EM_ECM_TARGET_FRESHNESS

- MGMT$MANAGEABLE_ENTITIES

For examples of how to use views, see Chapter 20, "Examples".

18.1 MGMT$AGENTS_MONITORING_TARGETS

The MGMT$AGENTS_MONITORING_TARGETS view shows the available Management Agents for targets.

Table 18-1 MGMT$AGENTS_MONITORING_TARGETS

Column

Description

TARGET_NAME

Name of the target

TARGET_TYPE

Type of the target

TARGET_GUID

Unique ID of the target

AGENT_NAME

Name of the Management Agent monitoring the target

AGENT_TYPE

Type of Management Agent

AGENT_GUID

Unique ID of the Management Agent

AGENT_IS_MASTER

Specifies whether the Management Agent is a master or slave.

Possible values:

- 1: Master

- 0: Slave

EMD_URL

URL of the emd monitoring the target

HOST_NAME

Host on which the target or Management Agent resides

MONITORING

Indicates how the target is monitored.

Possible values:

- MGMT_GLOBAL.G_MON_MODE_DEFAULT: Single Management Agent, vanilla monitoring mode

- MGMT_GLOBAL.G_MON_MODE_AGENT_MEDIATED: Multi Management Agent, agent-mediated monitoring

18.2 MGMT$EM_ECM_MOS_PROPERTIES

The MGMT$EM_ECM_MOS_PROPERTIES view exposes target information useful for My Oracle Support and Patching. It returns values from the EM_ECM_MOS_PROPERTIES table.

Table 18-2 MGMT$EM_ECM_MOS_PROPERTIES

Column

Description

TARGET_GUID

The GUID of the target

HOST_TARGET_GUID

The GUID of the host that is hosting this target. The value is NULL for host targets.

ORACLE_HOME_TARGET_GUID

The GUID of the Oracle home target where this target is installed

PLATFORM_ID

The platform ID of the host that is hosting this target

PLATFORM_VERSION_ID

The platform version ID of the host that is hosting this target

18.3 MGMT$EM_ECM_TARGET_FRESHNESS

The MGMT$EM_ECM_TARGET_FRESHNESS view exposes the newest and oldest configuration snapshot information on a per target basis. It returns the collection timestamp and snapshot GUID for the most recently collected (newest) and least recently (oldest) collected snapshot for the target. If the target is a system, then the values will be valid across all snapshots of all member targets of the system.

Table 18-3 MGMT$EM_ECM_TARGET_FRESHNESS

Column

Description

TARGET_GUID

The GUID of the target

NEWEST_SNAPSHOT_GUID

The snapshot GUID of the most recent collection

NEWEST_SNAPSHOT_TIMESTAMP

The date and time of the most recent collection

OLDEST_SNAPSHOT_GUID

The snapshot GUID of the oldest collection

OLDEST_SNAPSHOT_TIMESTAMP

The date and time of the oldest collection

18.4 MGMT$MANAGEABLE_ENTITIES

The MGMT$MANAGEABLE_ENTITIES view contains a list of all the Manageable Entities in Enterprise Manager.

Table 18-4 MGMT$MANAGEABLE_ENTITIES

Column

Description

ENTITY_GUID

Unique ID corresponding to the Manageable Entity.

- For systems, services, groups, and so on, this ID contains the TARGET_GUID

- For target components, this ID contains the COMPONENT_GUID

ENTITY_TYPE

Type of the Manageable Entity.

- For systems, services, groups, and so on, this column contains the target type

- For target components, this column contains the component type

ENTITY_NAME

Name of the Manageable Entity.

- For systems, services, groups, and so on, this column contains the entity name

- For target components, this column contains the component name

PARENT_ME_GUID

Parent entity containing the target component. For non-target components, this column is equal to ENTITY_GUID.

PARENT_ME_TYPE

Type of the parent target. (Valid for target components only)

PARENT_ME_NAME

Name of the parent target. (Valid for target components only)

MANAGE_STATUS

Manage status of the entity.

Possible values:

- 0: Ignored

- 1: Not managed yet

- 2: Managed

- 3: Managed target component

PROMOTE_STATUS

Promote status of the target

- 0: Cannot promote (existence only entity)

- 1: Eligible for promotion

- 2: Promotion in progress

- 3: Promoted

DYNAMIC_PROPERTY_STATUS

Status of the dynamic properties

Possible values:

- 0: Dynamic properties have not been uploaded by the Management Agent

- 1: Dynamic properties are uploaded by the Management Agent

TYPE_META_VER

Metadata version number

CATEGORY_PROP_N

Up to five category properties can be used to distinguish different metric definitions based on different configurations.

For example, OS version, database version, Oracle RAC configuration, and so on.

TIMEZONE_REGION

Name of the time zone region that the target operates in.

Note: Component will be in same time zone as the target

DISPLAY_NAME

User-friendly name for the Manageable Entity

OWNER

Enterprise Manager administrator that owns the target

HOST_NAME

Host on which the target resides

EMD_URL

The URL for the EMD where the target is being collected

BROKEN_REASON

Code representing a reason why a target is broken

Possible values:

- 0: Not broken

- 1: Missing required properties

- 2: Metadata not found

- 4: Error computing dynamic properties

- 8: Dynamic property missing in the result

- 16: Target name not specified

- 32: Target could not be saved

- 64: Errors in target test metrics

BROKEN_STR

String associated with the broken reason

MONITORING_MODE

Indicates how the target is monitored.

Possible values:

- G_MON_MODE_DEFAULT(0): Single Management Agent, vanilla monitoring mode

- G_MON_MODE_OMS_MEDIATED(1): Multi Management Agent, OMS mediated monitoring

- G_MON_MODE_AGENT_MEDIATED(2): Multi Management Agent, agent mediated monitoring

IS_PROPAGATING

Specifies whether the Manageable Entity is privilege propagating

DISCOVERED_NAME

Name with which the Manageable Entity was discovered

ORG_ID

Organization ID used by the Oracle Configuration Manager (OCM) Harvseter. This ID is used to uniquely identify customers.

Note: A large customer might have multiple organization IDs to represent different lines of business within the company.

ORACLE_HOME

Oracle home of the target

ORACLE_CONFIG_HOME

This value is used by the OCM collector and CCR to indicate targets that might share a single Oracle home but have their configuration state kept in separate directories

LOAD_TIMESTAMP

The date and time when the Manageable Entity record was first loaded (in the time zone of the Management Repository)

19 Virtualization Views

This chapter provides a description of each virtualization target view and its columns. It contains the following sections:

- MGMT$VT_VM_CONFIG

- MGMT$VT_VM_SW_CFG

- MGMT$VT_VM_VNIC

- MGMT$VT_VM_VNIC_QOS

- MGMT$VT_VM_EM_CFG

- MGMT$VT_VM_VDISKS

- MGMT$VT_VM_VDISK_QOS

- MGMT$VT_EXA_CTRL_VSERVER_TAGS

- MGMT$VT_VSP_CONFIG

- MGMT$VT_VS_HW_CFG

- MGMT$VT_VS_HYPERVISOR

- MGMT$VT_VS_PROCESSORS

- MGMT$VT_VS_SW_CFG

- MGMT$VT_VS_ATTRIBUTES

- MGMT$VT_VS_FS_MOUNTS

- MGMT$VT_VS_NET_DEVICE

- MGMT$VT_VS_FILESERVERS

- MGMT$VT_VS_REPOS

- MGMT$VT_VS_ABILITIES

- MGMT$VT_ZONE_CONFIG

For examples of how to use views, see Chapter 20, "Examples".

19.1 MGMT$VT_VM_CONFIG

The MGMT$VT_VM_CONFIG retrieves the Oracle VM Guest configuration.

Table 19-1 MGMT$VT_VM_CONFIG

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

BOOT_TYPE

Boot Type cdrom/disk/network

CPU_COUNT

Number of CPUs for this virtual machine

CPU_PRIORITY

Priority value for scheduling. Range 1-100

DOMAIN_TYPE

Domain type (hvm or pvm) of the virtual machine

HA_FLAG

Current state of the High Availability flag

MEM_REQD_MB

Amount of memory required to run this virtual machine

MOUSE_TYPE

The type of mouse device to be used with this virtual machine

REBOOT_LIMIT

Reboot limit

ALLOC_MEM_MB

Allocated memory in MB for this virtual machine

ALLOC_DISK_MB

Allocated diskspace in MB for this virtual machine

19.2 MGMT$VT_VM_SW_CFG

The MGMT$VT_VM_SW_CFG retrieves the software related configuration for the Oracle VM Guest target

Table 19-2 MGMT$VT_VM_SW_CFG

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

OS_NAME

Name of the operating system

KERNEL_VER

Kernel version

USE_VS_TOOLS

Are VS tools used for this virtual machine?

VS_TOOLS_OS

Operating system as returned by VS tools

VS_TOOLS_VER

VS tools version

GUEST_UUID

UUID of the virtual machine in OVM Manager

VS_UUID

UUID of the server the virtual machine is running on

VSP_UUID

UUID of the server pool the virtual machine is contained in

OVMM_UUID

UUID of the OVM Manager the virtual machine is registered with. Has data only if the virtual machine is not part of a server pool.

OVM_DISPLAY_NAME

The current display name of the virtual machine in OVM. Need not be the same as OEM's target name.

19.3 MGMT$VT_VM_VNIC

The MGMT$VT_VM_VNIC retrieves Virtual Network Interface Card information for the virtual machine.

Table 19-3 MGMT$VT_VM_VNIC

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

MAC_ADDRESS

MAC address

ETH_NET

Ethernet network the VNIC is connected to

IP_ADDRESS

IP address. Each VNIC can have multiple IP addresses

IP_ADDRESS_TYPE

Address type - static/dhcp

19.4 MGMT$VT_VM_VNIC_QOS

The MGMT$VT_VM_VNIC_QOS displays the quality of service associated with the VNIC.

Table 19-4 MGMT$VT_VM_VNIC_QOS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

MAC_ADDRESS

MAC address

QOS_NAME

Quality of service name

19.5 MGMT$VT_VM_EM_CFG

The MGMT$VT_VM_EM_CFG displays the OEM specified configuration for this virtual machine

Table 19-5 MGMT$VT_VM_EM_CFG

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

VM_TYPE

Type of virtual machine. For example, small/medium/large. These values are defined in OEM

19.6 MGMT$VT_VM_VDISKS

The MGMT$VT_VM_VDISKS displays virtual disk information for the virtual machine.

Table 19-6 MGMT$VT_VM_VDISKS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

UUID

The UUID of the virtual disk in OVM Manager

NAME

Display name of the virtual disk in OVM Manager

SIZE_MB

Size in MB

TYPE

Type of virtual disk

SHAREABLE

Is the virtual disk shareable or not?

REPO

The repository that the virtual disk comes from

DISK_MODE

Mode. For example, read-only or read-write.

19.7 MGMT$VT_VM_VDISK_QOS

The MGMT$VT_VM_VDISK_QOS displays virtual disk quality of service information.

Table 19-7 MGMT$VT_VM_VDISK_QOS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

UUID

The UUID of the virtual disk in OVM Manager

QOS_NAME

Quality of service associated with the virtual disk

19.8 MGMT$VT_EXA_CTRL_VSERVER_TAGS

The MGMT$VT_EXA_CTRL_VSERVER_TAGS displays Exalogic Control VServer Tags.

Table 19-8 MGMT$VT_EXA_CTRL_VSERVER_TAGS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

ID

The Identifier for the Tag

TYPE

Type of VServer

DESCRIPTION

Description for the VServer

SOFTWARE_NAME

Software Name on the VServer

URL

URL of the Software

VERSION

Version

19.9 MGMT$VT_VSP_CONFIG

The MGMT$VT_VSP_CONFIG view displays the server pool configuration.

Table 19-9 MGMT$VT_VSP_CONFIG

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

MASTER_VIP

Master Virtual IP Address

IS_DRS_ENABLED

Is Distributed Resource Scheduler enabled for this server pool?

IS_DPM_ENABLED

Is Distributed Power Management enabled for this server pool?

TOTAL_MEMORY_MB

Total memory across all servers in the server pool in MB

TOTAL_DISKSPACE_MB

Total storage across all servers in the server pool in MB

TOTAL_PHYSICAL_CPUS

Total number of physical CPUs across all servers in the server pool

TOTAL_VCPUS

Total number of VCPUs allocated across all virtual machines in the server pool

TOTAL_NICS

Total number of network interface cards across all servers in the server pool

CLSTR_ENABLED

Is the pool cluster enabled?

VM_MIGRATE_SECURE

Is secure virtual machine migration enabled?

POOL_FILESYSTEM

Server Pool filesystem information

VSP_UUID

The UUID of the server pool in OVM Manager

ZONE_UUID

The UUID of the parent zone in OVM Manager

OVMM_UUID

The UUID of the OVM Manager managing the server pool. Only collected if the server pool is not part of a zone.

OVM_DISPLAY_NAME

The display name of the server pool in OVM Manager. Need not be the same as OEM's target name

19.10 MGMT$VT_VS_HW_CFG

The MGMT$VT_VS_HW_CFG view displays the Oracle VM Server hardware configuration.

Table 19-10 MGMT$VT_VS_HW_CFG

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

VENDOR

Vendor

PROCESSOR_SPEED

CPU speed

PROCESSOR_TYPE

CPU type

NO_EXECUTE_FLAG

Is the no execute flag set?

NUM_POP_PROC_SOCKS

Sockets filled

NUM_PROC_SOCKS

Sockets per NUMA node

NUM_THREADS_PER_CORE

Threads per core

BIOS_RELEASE_DATE

BIOS release date

BIOS_VENDOR

BIOS vendor

BIOS_VERSION

BIOS version

MEMORY_MB

Server memory in MB

AVAILABLE_MEM_MB

Available memory on the server in MB

MEM_OVERHEAD_MB

Control domain memory in MB

USABLE_MEM_MB

Memory usable by virtual machines in MB

SWAP_SPACE_MB

Swap space on the server in MB

ADDR_LENGTH_BITS

Address length - for example, 32 bit and 64 bit

LOCAL_DISK_GB

Local disk space in GB

ENABLED_PROCESSORS

Number of enabled processors

ENABLED_CORES

Number of enabled cores

NUM_VCPUS

Number of VCPUs allocated on the server

CD_CPU_COUNT

Number of CPUS for the control domain

NUM_CORES

Number of cores

NUM_CORES_PER_SOCK

Number of cores per socket

19.11 MGMT$VT_VS_HYPERVISOR

The MGMT$VT_VS_HYPERVISOR view displays Hypervisor related information.

Table 19-11 MGMT$VT_VS_HYPERVISOR

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

VERSION

Version

HVM_CAPABLE

Is the hypervisor HVM capable?

CAPABILITY

Capability supported by the hypervisor

TYPE

Type - for example, LDOM, VBOX, XEN

19.12 MGMT$VT_VS_PROCESSORS

The MGMT$VT_VS_PROCESSORS view displays information about processors on the server.

Table 19-12 MGMT$VT_VS_PROCESSORS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

PROC_ID

Processor ID

CPU_FAMILY

CPU family the processor belongs to

CPU_MODEL

CPU Model

FAMILY

Family

FLAGS

CPU flags

L1CACHE_KB

Size of L1 cache in KB

L2CACHE_KB

Size of L2 cache in KB

L3CACHE_KB

Size of L3 cache in KB

MANUFACTURER

Name of the manufacturer

MODEL_NAME

Model name

VENDOR_ID

Vendor ID

19.13 MGMT$VT_VS_SW_CFG

The MGMT$VT_VS_SW_CFG view displays

Table 19-13 MGMT$VT_VS_SW_CFG

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

AGENT_PORT

OVS agent port

AGENT_VERSION

OVS agent version

OVM_VERSION

OVM version

CONSOLE_SHELL_FLAG

Is the console shell flag set?

DISABLE_USB_FLAG

Is the disable USB flag set?

HALT_ON_ERROR_FLAG

Is the halt on error flag set?

KERNEL_RELEASE

Kernel release

KERNEL_VERSION

Kernel version

ASSOC_CLUSTER

Associated cluster

PROTECTED_FLAG

Is the protected flag set?

PYTHON_BIND_VER

Python binding version

RPM_VER

RPM version

VS_UUID

UUID of the server in OVM Manager

VSP_UUID

UUID of the parent server pool in OVM Manager

OVMM_UUID

UUID of the OVM Manager where the server is registered. Only contains data if the server is not part of a pool.

OVM_DISPLAY_NAME

The display name of the server in OVM Manager. Need not correspond to OEM target name.

CD_HOST_OS_NAME

Control domain host OS name

CD_HOST_OS_TYPE

Control domain host OS type

CD_HOST_OS_MAJOR_VER

Control domain host OS major version

CD_HOST_OS_MINOR_VER

Control domain host OS minor version

19.14 MGMT$VT_VS_ATTRIBUTES

The MGMT$VT_VS_ATTRIBUTES view displays miscellaneous server configuration information.

Table 19-14 MGMT$VT_VS_ATTRIBUTES

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

IS_MASTER

Is the server running as the master in the parent server pool?

UPGRADE_REQUIRED

Is upgrade required on the server?

19.15 MGMT$VT_VS_FS_MOUNTS

The MGMT$VT_VS_FS_MOUNTS view displays filesystem mounts on the server.

Table 19-15 MGMT$VT_VS_FS_MOUNTS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

FILESERVER_UUID

UUID of the file server the file system is being served from

MOUNT_POINT

Filesystem mount point

REMOTE_PATH

The remote path of the filesystem

OPTIONS

Mount options

PHYSICAL_SIZE

Physical size of the filesystem

19.16 MGMT$VT_VS_NET_DEVICE

The MGMT$VT_VS_NET_DEVICE view displays information about network devices on the server.

Table 19-16 MGMT$VT_VS_NET_DEVICE

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

MAC_ADDRESS

MAC address

IP_ADDRESS

IP address

INTERFACE_NAME

Name of the interface

MTU

Maximum tranmission unit

BANDWIDTH_MBPS

Bandwidth in MB/S

NETMASK

Netmask

ADDRESS_TYPE

Address type

19.17 MGMT$VT_VS_FILESERVERS

The MGMT$VT_VS_FILESERVERS view displays information about file servers associated with the server.

Table 19-17 MGMT$VT_VS_FILESERVERS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

FILESERVER_UUID

UUID of the fileserver

FILESERVER

Name of the fileserver

FSNAME

Name of the filesystem (for example, nfs)

FSTYPE

Type (for example, networkfs)

19.18 MGMT$VT_VS_REPOS

The MGMT$VT_VS_REPOS view displays storage repositories visible to the server.

Table 19-18 MGMT$VT_VS_REPOS

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

FILESERVER_UUID

UUID of the fileserver

MOUNT_POINT

mountpoints on the virtual server from the fileserver

REPOSITORY_UUID

UUID of the repository

REPOSITORY

Name of the repository

19.19 MGMT$VT_VS_ABILITIES

The MGMT$VT_VS_ABILITIES view displays

Table 19-19 MGMT$VT_VS_ABILITIES

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

ABILITY

Name of the ability

ENABLED

Is the above ability enabled or not?

19.20 MGMT$VT_ZONE_CONFIG

The MGMT$VT_ZONE_CONFIG view displays the Oracle VM Zone configuration.

Table 19-20 MGMT$VT_ZONE_CONFIG

Column

Description

ECM_SNAPSHOT_ID

The ECM Snapshot ID corresponding to the latest ECM snapshot uploaded

TARGET_GUID

GUID of the target instance

TOTAL_MEMORY_MB

Total memory across servers in the zone in MB

TOTAL_DISKSPACE_MB

Total diskspace across servers in the zone in MB

TOTAL_PHYSICAL_CPUS

Total number of physical CPUs across servers in the zone

TOTAL_NICS

Total number of NICS across servers in the zone

ZONE_UUID

UUID of the zone in OVM Manager

OVMM_UUID

UUID of the OVM Manager where this zone is registered

OVM_DISPLAY_NAME

OVM display name

20 Examples

This chapter provides examples of how to use the Management Repository views. It includes examples for the following views:

- Blackout Views

- Compliance Views

- Enterprise Configuration Management Views

- Hardware Views

- Inventory Views

- Jobs Views

- Management Template Views

- Metric Views

- Monitoring Views

- Operating System Views

20.1 Blackout Views

- How do I return all targets under a blackout?

- How can I view a list of future scheduled blackouts?

- How can I view the number of targets blacked out in the last 30 days?

20.1.1 How do I return all targets under a blackout?

To return all targets under blackout, enter the following query:

SELECT target_name, target_type, start_time, end_time
FROM   mgmt$blackout_history
WHERE  sysdate BETWEEN start_time AND NVL(end_time,sysdate+1/60*60*24);

20.1.2 How can I view a list of future scheduled blackouts?

The MGMT$BLACKOUTS file contains definitions of all blackouts known in the system. To view a list of future scheduled blackouts, enter the following query:

SELECT blackout_name, reason, created_by, schedule_type, scheduled_time
FROM   mgmt$blackouts
WHERE  status = 'Scheduled';

20.1.3 How can I view the number of targets blacked out in the last 30 days?

The MGMT$BLACKOUT_HISTORY file contains an overview of all finished blackouts for each target. To view the number of targets blacked out in the last 30 days, enter the following query:

ORA-00936: missing expression

SELECT target_type, COUNT(*) cnt
FROM   mgmt$blackout_history
WHERE  start_time > SYSDATE-30
GROUP BY target_type
(*) = 1;

20.2 Compliance Views

- How do I view a list of all the compliance rules?

- How do I view the monitoring compliance rules only?

- How do I view all the repository compliance rules for a specific author?

- How do I view a list of all the compliance standards?

- How do I view all compliance standards owned by a specific user

- How do I view a list of all the compliance standard groups?

- How do I view all compliance standard groups in production?

- How do I query results for compliance standards with no included standards

- How do I obtain the results for compliance standards with included standards?

- How do I obtain the results for compliance standard rules in a compliance standard for a target?

- How do I obtain the results for compliance standard groups?

- How do I obtain association information for compliance standards and targets?

- How do I obtain the violation ID for an active violation of a compliance rule?

- How do I obtain the violation column information?

- How do I access the compliance rule violation context definition-related metadata?

- How do I find all bundles that are in violation?

- How do I find all observations (all states) for all bundles in violation?

- How do I get a list of all the actions that occurred on all targets during a specific time range?

- How do I get a list of all actions that occurred on a single target during a specific time range?

- How do I get a list of all the file changes that occurred on a single target during a specific time range?

- How do I get a list of all unauthorized actions that occurred during a specific time range?

- How do I get a list of all occurrences of sudo?

20.2.1 How do I view a list of all the compliance rules?

To view a list of all the compliance rules, enter the following query:

SELECT *
FROM mgmt$compliance_standard_rule;

20.2.2 How do I view the monitoring compliance rules only?

To view the monitoring compliance rules only, enter the following query:

SELECT *
FROM mgmt$compliance_standard_rule WHERE RULE_TYPE='Monitoring';

20.2.3 How do I view all the repository compliance rules for a specific author?

To view all the repository compliance rules where the author is John Smith:, enter the following query:

SELECT *
FROM mgmt$compliance_standard_rule
WHERE RULE_TYPE='Repository' AND AUTHOR='John Smith';

20.2.4 How do I view a list of all the compliance standards?

The following queries provide examples about how to use this view:

To view a list of all the compliance standards, enter the following query:

SELECT *
FROM mgmt$compliance_standard;

20.2.5 How do I view all compliance standards owned by a specific user

To view all compliance standards owned by John Smith, enter the following query:

SELECT * FROM mgmt$compliance_standard WHERE OWNER='John Smith';

20.2.6 How do I view a list of all the compliance standard groups?

To view a list of all the compliance standard groups, enter the following query:

SELECT * FROM mgmt$compliance_standard_group;

20.2.7 How do I view all compliance standard groups in production?

To view all compliance standard groups in production, enter the following query:

SELECT * FROM mgmt$compliance_standard_group WHERE LIFECYCLE_STATUS='Production';

20.2.8 How do I query results for compliance standards with no included standards

To query results for compliance standards with no included standards, enter the following query, where ? represents the values for each attribute:

SELECT * FROM mgmt$cs_eval_summary WHERE cs_guid = ? AND target_guid = ?;

Note:
To obtain CS_GUID, query the MGMT$COMPLIANCE_STANDARD view on compliance standard attributes such as name or target type. For example:

SELECT CS_NAME FROM mgmt$compliance_standard;

20.2.9 How do I obtain the results for compliance standards with included standards?

The following queries provide examples of how to use this view:

To obtain the results for compliance standards with included standards, enter the following query, where ? represents the value of each attribute:

SELECT * FROM mgmt$composite_cs_eval_summary WHERE root_cs_guid = ? AND root_target_guid = ?;

This query returns values for all the following possible results for the root compliance standard or root target:

- ROOT_GUID

- RQS_GUID

- CS_GUID

- ROOT_TARGET_GUID

20.2.10 How do I obtain the results for compliance standard rules in a compliance standard for a target?

To obtain the results for compliance standard rules in a compliance standard for a target, enter the following query where ? represents the values for ROOT_CS_GUID and ROOT_TARGET_GUID:

SELECT * FROM mgmt$cs_rule_eval_summary WHERE root_cs_guid = ? AND root_target_guid = ?;

20.2.11 How do I obtain the results for compliance standard groups?

To obtain the results for compliance standard groups, enter the following query where ? is the value for CS_GUID:

SELECT * FROM mgmt$cs_group_eval_summary WHERE cs_guid = ?;

Note:
To obtain CS_GUID, query the MGMT$COMPLIANCE_STANDARD view on compliance standard attributes such as name or target type. For example:

SELECT CS_NAME FROM mgmt$compliance_standard;

20.2.12 How do I obtain association information for compliance standards and targets?

To obtain association information for compliance standards and targets, enter the following query where ? represents the value for each of the attributes:

SELECT * FROM mgmt$cs_target_assoc WHERE cs_guid = ? AND target_guid = ?;

Note:
To obtain CS_GUID, query the MGMT$COMPLIANCE_STANDARD view on compliance standard attributes such as name or target type. For example:

SELECT CS_NAME FROM mgmt$compliance_standard;

20.2.13 How do I obtain the violation ID for an active violation of a compliance rule?

To obtain the violation GUID, enter the following query, where ? represents the value for RULE_GUID:

SELECT * FROM mgmt$csr_current_violation WHERE rule_guid=?;

Note:
To obtain the RULE_GUID, query the MGMT$CS_EVAL_SUMMARY view.
For more information, see "How do I obtain the results for compliance standard rules in a compliance standard for a target?".

20.2.14 How do I obtain the violation column information?

To obtain the additional columns defined in a compliance rule to be collected for a violation, enter the following query where ? represents the value for VIOLATION_GUID:

SELECT * FROM mgmt$csr_violation_context WHERE violation_guid=?;

Note:
To obtain the VIOLATION_GUID, query the MGMT$CSR_CURRENT_VIOLATION view. For example:

SELECT * FROM mgmt$csr_current_violation WHERE rule_guid=?;

For more information, see "How do I obtain the violation ID for an active violation of a compliance rule?".

20.2.15 How do I access the compliance rule violation context definition-related metadata?

To access the compliance rule violation context definition-related metadata, enter the following query, where ? represents the value for RULE_GUID:

SELECT * FROM mgmt$em_rule_viol_ctxt_def WHERE rule_guid=?;

Note:
To obtain the RULE_GUID, query the MGMT$CS_EVAL_SUMMARY view.
For more information, see "How do I obtain the results for compliance standard rules in a compliance standard for a target?".

20.2.16 How do I find all bundles that are in violation?

To find all bundles that are in violation (that is, at least one unauthorized observation in the bundle), enter the following query:

SELECT * FROM mgmt$ccc_all_obs_bundles WHERE bundle_in_violation = 'true';

20.2.17 How do I find all observations (all states) for all bundles in violation?

To find all observations (all states) for all bundles in violation, enter the following query:

SELECT *
FROM mgmt$ccc_all_observations o, mgmt$ccc_all_obs_bundles b
WHERE o.bundle_id=b.bundle_id AND b.bundle_in_violation='true';

20.2.18 How do I get a list of all the actions that occurred on all targets during a specific time range?

To get a list of all the actions that occurred on all targets during a specific time range, enter the following query where hh:mm is the time in hours and minutes:

SELECT *
FROM mgmt$ccc_all_observations
WHERE action_time BETWEEN hh:mm AND hh:mm;

20.2.19 How do I get a list of all actions that occurred on a single target during a specific time range?

To get a list of all actions that occurred on a single target during a specific time range, enter the following query where hh:mm is the time in hours and minutes and target_name is the name of the target:

SELECT * FROM mgmt$ccc_all_observations WHERE action_time BETWEEN hh:mm AND hh:mm and target = target_name;

20.2.20 How do I get a list of all the file changes that occurred on a single target during a specific time range?

To get a list of all the file changes that occurred on a single target during a specific time range, enter the following query where hh:mm is the time in hours and minutes and target_name is the name of the target:

SELECT * FROM mgmt$ccc_all_observations WHERE action_time BETWEEN hh:mm and hh:mm and target = target_name and entity_type = 'OS File';

Note:
You can replace 'OS File' with any entity type from the Cloud Control console, such as 'OS Process' or 'OS User'.

20.2.21 How do I get a list of all unauthorized actions that occurred during a specific time range?

To get a list of all unauthorized actions that occurred during a specific time range, enter the following query where hh:mm is the time in hours and minutes and target_name is the name of the target:

SELECT * FROM mgmt$ccc_all_observations WHERE action_time BETWEEN hh:mm and hh:mm and target = target_name and audit_status='Unauthorized';

20.2.22 How do I get a list of all occurrences of sudo?

To get a list of all occurrences of sudo, enter the following query where hh:mm is the time in hours and minutes and target_name is the name of the target:

SELECT * FROM mgmt$ccc_all_observations WHERE action_time BETWEEN hh:mm and hh:mm and target = target_name and action = 'osuser_sudo_suc';

All possible actions can be seen in the EM_CCC_META_OBSTYPE table.

20.3 Enterprise Configuration Management Views

- How do I view a list of all the Enterprise Configuration Management snapshots visible to the current Enterprise Manager user, including both current and saved snapshots?

- How do I get a list of all current configuration snapshots and limit the access to the snapshots based on the logged in user?

- How do I view the targets involved in a comparison?

- How do I view the latest comparison job results for a first target, second target combination?

- How do I view all the comparison jobs that ran for a first target, second target combination?

- How do I view the number of comparison differences for each configuration item in a comparison?

- How do I view the comparison CCS data source information, such as CCS file name and difference status?

- How do I view comparison CCS data source detail information?

- How do I retrieve the comparison CCS data?

- How do I get a list of all the CCS data sources or collected CCS files visible to the current Enterprise Manager user?

- How do I get a list of the current CCS data sources or collected CCS files visible to current Enterprise Manager user?

- How do I view the CCS-parsed data visible to the current Enterprise Manager user?

- How do I view the current CCS-parsed data?

20.3.1 How do I view a list of all the Enterprise Configuration Management snapshots visible to the current Enterprise Manager user, including both current and saved snapshots?

To view a list of all snapshots visible to the current Enterprise Manager user, including both current and saved snapshots, enter the following query:

mgmt$ecm_visible_snapshots

SELECT * from mgmt$ecm_visible_snapshots
WHERE target_type = 'oracle_database';

20.3.2 How do I get a list of all current configuration snapshots and limit the access to the snapshots based on the logged in user?

To view a list of all Enterprise Configuration Management current configuration snapshots and limit access to the snapshots based on the logged in user, enter the following query:

SELECT * from mgmt$ecm_current_snapshots
WHERE target_type='oracle_database'

mgmt$ecm_current_snapshots

20.3.3 How do I view the targets involved in a comparison?

To get targets involved in comparison, enter the following query:

SELECT target_name, target_type FROM mgmt$ecm_cmp_visible_configs;

20.3.4 How do I view the latest comparison job results for a first target, second target combination?

To get the latest comparison job results for a first target, second target combination, enter the following query:

SELECT job_name, job_owner
FROM  mgmt$ecm_cmp_job_last_results
WHERE first_target ='?'
AND second_target='?'

20.3.5 How do I view all the comparison jobs that ran for a first target, second target combination?

To get all the comparison jobs that ran for a first target, second target combination, enter the following query:

SELECT job_name, job_owner
FROM  mgmt$ecm_cmp_jobs
WHERE first_target ='?'
AND second_target='?' ;

20.3.6 How do I view the number of comparison differences for each configuration item in a comparison?

To get the number of comparison differences for each configuration item in a comparison.

Bind variables must be specified for the execution.

SELECT config_item , total_ci_diffs , first_target, second_target
FROM mgmt$ecm_cmp_rpt_ci_diffs
WHERE first_target='?
AND second_target='?' ;

20.3.7 How do I view the comparison CCS data source information, such as CCS file name and difference status?

To view the comparison CCS data source information, such as CCS file name, enter the following query:

SELECT  ccs_ds, ccs_ds_attr_diff_type
FROM  mgmt$ecm_cmp_rpt_ccs_ds
WHERE first_target='?'
AND second_target='?' ;

20.3.8 How do I view comparison CCS data source detail information?

To view comparison CCS data source detail information, retrieve the file level differences for a given comparison by entering the following query:

SELECT ccs_ds_attr_diff_type, attr_diff_type, ccs_ds, display_attr_col_name, first_target, second_target
FROM  mgmt$ecm_cmp_rpt_ccs_ds_dtls ;

20.3.9 How do I retrieve the comparison CCS data?

To retrieve the CCS-parsed data available for a given comparison (the same data as differences), enter the following query:

SELECT first_target, second_target, ccs_ds, path, attr_col_name, parsed_diff_type, first_attr_value, second_attr_value
FROM mgmt$ecm_cmp_rpt_ccs_pd_all ;

20.3.10 How do I get a list of all the CCS data sources or collected CCS files visible to the current Enterprise Manager user?

To view a list of all CCS data sources or collected CCS files visible to the current Enterprise Manager user, enter the following query:

SELECT ccs_ui_name, display_target_name, data_source_name, full_path
FROM mgmt$ccs_data_source_visible
WHERE target_type='weblogic_j2eeserver';

20.3.11 How do I get a list of the current CCS data sources or collected CCS files visible to current Enterprise Manager user?

To get a list of the current (that is, the most recently collected) CCS data sources or collected CCS files visible to current Enterprise Manager user, enter the following query:

SELECT ccs_ui_name, cm_target_name, data_source_name, full_path
FROM mgmt$ccs_data_source;

20.3.12 How do I view the CCS-parsed data visible to the current Enterprise Manager user?

To view the CCS-parsed data visible to the current Enterprise Manager user, enter the following query:

SELECT distinct ccs_ui_name, data_source_name, attr, value
FROM mgmt$ccs_data_visible
WHERE target_type='weblogic_j2eeserver';

20.3.13 How do I view the current CCS-parsed data?

To get the CCS-parsed current data, enter the following query:

SELECT distinct ccs_ui_name, data_source_name, attr, value
FROM mgmt$ccs_data
WHERE cm_target_type='weblogic_j2eeserver';

20.4 Hardware Views

- How do I create a derived associations rule which establishes associations between a host and an Oracle VM Guest target on which it is deployed?

20.4.1 How do I create a derived associations rule which establishes associations between a host and an Oracle VM Guest target on which it is deployed?

The following example is an example of a rule between an Oracle VM Guest target type and a host. The rule relies on a published EDK MGMT$HW_NIC view for the host and an ECM-generated CM$VT_VM_VNIC view. While the rule resides in the plug-in that defines the Oracle VM Guest target type, then it can reference the CM$ view for the snapshot type belonging to that target type and any EDK-accessible view (such as MGMT$ views) from the host target type, which might reside in a different plug-in.

<Rule name="host_deployed_on_oracle_vm_guest">
<query>
SELECT 'deployed_on' AS assoc_type,
host.target_guid AS source_me_guid,
guest.cm_target_guid AS dest_me_guid
FROM   mgmt$hw_nic host,
cm$vt_vm_vnic guest
WHERE  guest.mac_address = host.mac_address_std
</query>
<trigger>
<targetType>host</targetType>
<snapshotType>ll_host_config</snapshotType>
<table>MGMT$HW_NIC</table>
<idColumn>source</idColumn>
</trigger>
<trigger>
<targetType>oracle_vm_guest</targetType>
<snapshotType>ovm_guest_config</snapshotType>
<table>CM$VT_VM_VNIC</table>
<idColumn>destination</idColumn>
</trigger>
</Rule>;

20.5 Inventory Views

- How do I get the number of targets for a metric?

- How do I get the number of Management Agents for a version?

- How do I get the listener port for each database?

- How do I get the number of databases for each category version?

- How do I get the number of databases for each category version and CPU count?

- How do I get the number of databases for each category version and OS platform?

- How do I find the number of hosts grouped by operating system?

- How do I view a list of targets used in the Oracle Enterprise Manager Cloud Control website definition?

- How do I find the number of targets grouped for each type for the Cloud Control Infrastructure group?

- How do I find the number of Management Agents grouped for each version?

- How do I view a list of all metrics for the Management Agent on the oms.test.com system?

- How do I view a list of all clustered targets in the repository?

- How do I view a list of all the installed Management Agent bundle patches?

- How do I view a list of all the Management Agents that do not have Oracle 12c Release 4 Bundle Patch 9 installed?

- How do I view the details of every Management Agent installation?

20.5.1 How do I get the number of targets for a metric?

To return the number of targets for a metric, enter the following query:

SELECT   metric_name, COUNT(DISTINCT target_name)
FROM     mgmt$target_type
WHERE    target_type = 'oracle_database'
GROUP BY metric_name;

20.5.2 How do I get the number of Management Agents for a version?

To return the number of Management Agents for a version, enter the following query:

SELECT   property_value, COUNT(*)
FROM     mgmt$target_properties
WHERE    target_type = 'oracle_emd'
AND    property_name = 'Version'
GROUP BY property_value;

20.5.3 How do I get the listener port for each database?

To return the listener port for each database, enter the following query:

SELECT target_name, property_value
FROM   mgmt$target_properties
WHERE  target_type = 'oracle_database'
AND  property_name = 'Port';

20.5.4 How do I get the number of databases for each category version?

To return the number of databases for each category version, enter the following query:

SELECT   property_value, COUNT(*)
FROM     mgmt$target_properties
WHERE    target_type = 'oracle_database'
AND    property_name = 'VersionCategory'
GROUP BY property_value;

20.5.5 How do I get the number of databases for each category version and CPU count?

To return the number of databases for each category version and CPU count, enter the following query:

SELECT   p1.property_value "Version", p2.property_value "CPU Count", COUNT(*) "Total"
FROM     mgmt$target_properties p1, mgmt$target_properties p2
WHERE    p1.target_type = 'oracle_database'
AND    p1.target_guid = p2.target_guid
AND    p1.property_name = 'VersionCategory'
AND    p2.property_name = 'CPUCount'
GROUP BY p1.property_value, p2.property_value
ORDER BY p1.property_value, p2.property_value;

20.5.6 How do I get the number of databases for each category version and OS platform?

To return the number of databases for each category version and OS platform, enter the following query:

SELECT   p3.property_value "Platform", p1.property_value "Version", COUNT(*) "Total"
FROM     mgmt$target_properties p1, mgmt$target_properties p2, mgmt$target_properties p3
WHERE    p1.target_type = 'oracle_database'
AND    p1.target_guid = p2.target_guid
AND    p3.target_name = p2.property_value
AND    p3.target_type = 'host'
AND    p1.property_name = 'VersionCategory'
AND    p2.property_name = 'MachineName'
AND    p3.property_name = 'OS'
GROUP BY p3.property_value, p1.property_value
ORDER BY p3.property_value, p1.property_value;

20.5.7 How do I find the number of hosts grouped by operating system?

The MGMT$TARGETS file contains all targets defined in Oracle Enterprise Manager Cloud Control. To find the number of hosts grouped by operating system, enter the following query:

SELECT type_qualifier1, COUNT(*) cnt
FROM   mgmt$target
WHERE  target_type = 'host'
GROUP BY type_qualifier1;

20.5.8 How do I view a list of targets used in the Oracle Enterprise Manager Cloud Control website definition?

The MGMT$TARGET_COMPOSITE file lists all members of every group target defined in Oracle Enterprise Manager Control. To view a list of targets used in the Oracle Enterprise Manager Cloud Control website definition, enter the following query:

mgmt$target_composite'Grid Control'

SELECT member_target_name, member_target_type
FROM   mgmt$target_composite
WHERE  composite_name = 'Grid Control'
AND  composite_type = 'website';

20.5.9 How do I find the number of targets grouped for each type for the Cloud Control Infrastructure group?

The MGMT$TARGET_MEMBERS file lists all members of all container targets defined in Oracle Enterprise Manager Control. To find the number of targets grouped for each type for the Cloud Control Infrastructure group enter the following query:

gmt$target_composite'GC Infrastructure'

SELECT member_target_type, COUNT(*) cnt
FROM   mgmt$target_members
WHERE  aggregate_target_name = 'GC Infrastructure'
AND  aggregate_target_type = 'composite'
GROUP BY member_target_type;

20.5.10 How do I find the number of Management Agents grouped for each version?

The MGMT$TARGET_PROPERTIES file contains the monitoring properties for every target. To find the number of Management Agents grouped for each version, enter the following query:

SELECT property_value, COUNT(*) cnt
FROM   mgmt$target_properties
WHERE  property_name = 'Version'
AND  target_type = 'oracle_emd'
GROUP BY property_value;

20.5.11 How do I view a list of all metrics for the Management Agent on the oms.test.com system?

The MGMT$TARGET_TYPE file contains all metrics collected for each target. To view a list of all metrics for the Management Agent on the system 'oms.test.com', enter the following query:

SELECT metric_label, column_label
FROM   mgmt$target_type
WHERE  target_type = 'oracle_emd'
AND  target_name = 'oms.test.com:3872'
AND  TRIM(metric_column) IS NOT NULL;

20.5.12 How do I view a list of all clustered targets in the repository?

The MGMT$TARGET_TYPE_PROPERTIES file contains all internal monitoring properties for all targets. To view a list of all clustered targets in the Management Repository, enter the following query:

SELECT target_name, target_type
FROM   mgmt$target_type_properties
WHERE  property_name  = 'is_cluster'
AND  property_value = 1;

20.5.13 How do I view a list of all the installed Management Agent bundle patches?

To view a list of the installed Management Agent bundle patches, enter the following query:

SELECT host_name, home_location ohome, install_time, patch_id, description
FROM   mgmt$oh_patch
WHERE  description LIKE 'EM-AGENT BUNDLE%'
ORDER BY host_name
;

20.5.14 How do I view a list of all the Management Agents that do not have Oracle 12c Release 4 Bundle Patch 9 installed?

To view a list of the Management Agents that do not have Oracle 12c Release 4 Bundle Patch 9 installed, enter the following query, where oracle_emd represents the Management Agent, O representes the Oracle software and, 20950034 is the Oracle 12c Release 4 Bundle Patch number:

SELECT inst_target_name agent_name, home_location ohome
FROM   mgmt$oh_installed_targets t
WHERE  inst_target_type = 'oracle_emd'
AND  home_type        = 'O'
AND  NOT EXISTS
(SELECT 1
FROM   mgmt$oh_patch p
WHERE  p.patch_id      = '20950034'
AND  p.home_location = t.home_location
AND  p.target_guid   = t.oh_target_guid)
ORDER BY inst_target_name
;

20.5.15 How do I view the details of every Management Agent installation?

To view the details of every Management Agent installation (assuming that the home Management Agent name contains agent12c), enter the following query:

SELECT host_name, home_location, oh_owner, oh_group
FROM   mgmt$oh_home_info
WHERE  oui_home_name LIKE 'agent12c%'
;

20.6 Jobs Views

- How can I view a list of all running repeating jobs?

- How do I view the number of notifications sent for failed jobs for each job owner?

- How do I view a list of all jobs that have the Management Repository itself as a target?

20.6.1 How can I view a list of all running repeating jobs?

The MGMT$JOBS file contains definitions of all of the jobs defined in the system. To view a list of all running repeating jobs, enter the following query:

SELECT job_name, job_owner, job_type, start_time,schedule_type
FROM   mgmt$jobs
WHERE  NVL(end_time,SYSDATE+1) > SYSDATE
AND  is_library     = 0
AND  schedule_type != 'One Time';

20.6.2 How do I view the number of notifications sent for failed jobs for each job owner?

The MGMT$JOB_ANNOTATIONS file contains an overview of all of the notifications sent out for job state changes. To view the number of notifications sent for failed jobs for each job owner, enter the following query:

SELECT job_owner, COUNT(*) cnt
FROM   mgmt$job_annotations
WHERE  job_status = 'FAILED'
AND  occurrence_timestamp > SYSDATE-30
GROUP BY job_owner;

20.6.3 How do I view a list of all jobs that have the Management Repository itself as a target?

The MGMT$JOB_TARGETS file contains a list of all targets used in the defined jobs. To view a list of all jobs that have the Management Repository itself as a target, enter the following query:

SELECT job_name, job_owner, job_type
FROM   mgmt$job_targets
WHERE  target_type = 'oracle_emrep';

20.7 Management Template Views

How do I view a list of all public templates?

20.7.1 How do I view a list of all public templates?

The MGMT$TEMPLATES file contains all templates defined in Oracle Enterprise Manager Cloud Control. To view a list of all public templates, enter the following query:

SELECT target_type, template_name, owner, created_date
FROM   mgmt$templates
WHERE  is_public = 1;

20.8 Metric Views

- How do I return the current thresholds for the alertlog metric?

- How do I view a list of all metric errors for metrics on Management Agents?

- How do I find the number of UDM metric errors on host targets in the last 30 days?

20.8.1 How do I return the current thresholds for the alertlog metric?

To return the current thresholds for the alertlog metric, enter the following query:

SELECT target_name, metric_column, warning_operator, warning_threshold, critical_operator, critical_threshold
FROM   mgmt$metric_collection
WHERE  target_type = 'oracle_database'
AND  metric_name = 'alertLog'
ORDER BY target_name, metric_column;

20.8.2 How do I view a list of all metric errors for metrics on Management Agents?

The MGMT$METRIC_ERROR_CURRENT file lists all outstanding metric errors. To view a list of all metric errors for metrics on Management Agents, enter the following query:

SELECT target_name, metric_name, collection_timestamp, error_message
FROM   mgmt$metric_error_current
WHERE  target_type = 'oracle_emd';

20.8.3 How do I find the number of UDM metric errors on host targets in the last 30 days?

The MGMT$METRIC_ERROR_HISTORY file contains an overview of all resolved metric errors. To find the number of UDM metric errors on host targets in the last 30 days, enter the following query:

SELECT target_name, COUNT(*) cnt
FROM   mgmt$metric_error_history
WHERE  target_type = 'host'
AND  metric_name = 'UDM'
AND  error_message IS NOT NULL
AND  collection_timestamp > SYSDATE-30
GROUP BY target_name;

20.9 Monitoring Views

- How do I get database metrics with outstanding severities?

- How do I get a list of all disabled metrics on Management Agents?

- How do I get the number of down targets?

- How do I get the availability information for the Enterprise Manager website?

- How do I get the number of alertlog severities for the database in the last 24 hours?

- How do I get the current CPU utilization of a host?

- How do I get a list of all the collected user-defined metrics (UDMs)?

- How do I get the first byte response for the Enterprise Manager website at a specific time?

- How do I obtain the average number of connections for a listener for a specific period?

- How do I find the reasons for host outages lasting longer than one day?

- How do I generate a list of all targets currently blacked out?

- How do I view a list of availability state changes made to targets in the repository in the last 30 days?

- How do I find all hosts with more than 90 percent CPU utilization?

- How do I find the minimum and maximum number of sessions for all OMS applications in the last 30 days?

- How do I find the loader throughput of the OMS on the last day?

- How do I find the minimum and maximum number from the last full day for the performance of Oracle Enterprise Manager Cloud Control?

- How do I view a list of all targets with the Response metric disabled?

- How do I view a list of all database or RAC targets that have the tablespace thresholds set to less than 85 for warning and 95 for critical?

20.9.1 How do I get database metrics with outstanding severities?

To return database metrics with outstanding severities, enter the following query:

SELECT   target_name, metric_name, COUNT(*),
TO_CHAR(MAX(collection_timestamp),'DD-MON-YYYY HH24:MI:SS')
FROM     mgmt$alert_current
WHERE    target_type = 'oracle_database'
GROUP BY target_name, metric_name;

20.9.2 How do I get a list of all disabled metrics on Management Agents?

To return a list of all disabled metrics on Management Agents, enter the following query:

SELECT collection_name, COUNT(*) nr_agents
FROM   mgmt$target_metric_collections
WHERE  is_enabled   = 0
GROUP BY collection_name
ORDER BY collection_name;

20.9.3 How do I get the number of down targets?

To return the number of down targets, enter the following query:

SELECT COUNT(*)
FROM   mgmt$availability_current
WHERE  availability_status='Target Down';

20.9.4 How do I get the availability information for the Enterprise Manager website?

To return the availability information for the Enterprise Manager website, enter the following query:

SELECT status, ROUND(duration,2) duration,
ROUND((RATIO_TO_REPORT(duration) OVER ())*100,2) AS total
FROM   (SELECT NVL(availability_status,'-unknown-') status,
SUM(NVL(end_timestamp,SYSDATE)-start_timestamp) duration
FROM   mgmt$availability_history
WHERE  target_name = 'Enterprise Manager'
AND  target_type = 'website'
GROUP BY availability_status);

20.9.5 How do I get the number of alertlog severities for the database in the last 24 hours?

To view the number of alertlog severities for the database in the last 24 hours, enter the following query:

ORA-00904: "COLLECTION__TIMESTAMP": invalid identifier

SELECT target_name, COUNT (*)
FROM mgmt$alert_history
WHERE target_type = 'oracle_database'
AND metric_name = 'alertlog'
AND collection__timestamp > SYSDATE-1
GROUP BY target_name;

20.9.6 How do I get the current CPU utilization of a host?

To return the current CPU utilization of a host, enter the following query:

SELECT column_label, value
FROM   mgmt$metric_current
WHERE  metric_name = 'Load'
AND  metric_column = 'cpuUtil'
AND  target_name = 'my.acme.com';

20.9.7 How do I get a list of all the collected user-defined metrics (UDMs)?

To return a list of all the collected user-defined metrics (UDMs), enter the following query:

sysman.mgmt$metric_current mgmt$metric_current

SELECT key_value udm_name, target_name, target_type, collection_timestamp, value
FROM   sysman.mgmt$metric_current
WHERE  metric_label = 'User Defined Metrics'
ORDER BY udm_name, target_type, target_name, collection_timestamp DESC;

20.9.8 How do I get the first byte response for the Enterprise Manager website at a specific time?

To return the first byte response for the Enterprise Manager Web site at 11.00 am yesterday, enter the following query:

SELECT target_name, AVG(average)
FROM   mgmt$metric_hourly
WHERE  target_name = 'EM Website'
AND  metric_name = 'http_response'
AND  metric_column = 'avg_first_byte_time'
AND  rollup_timestamp = TO_DATE(TO_CHAR(TRUNC(sysdate-1),'DD-MON-YYYY')||' 11:00:00','DD-MON-YYYY HH24:MI:SS')
GROUP BY target_name;

20.9.9 How do I obtain the average number of connections for a listener for a specific period?

To return the average number of connections for a listener for the last seven days, enter the following query:

SELECT target_name, average
FROM   mgmt$metric_daily
WHERE  target_type = 'oracle_listener'
AND  metric_name = 'Load'
AND  metric_column = 'estConns'
AND  rollup_timestamp = TRUNC(sysdate-7);

20.9.10 How do I find the reasons for host outages lasting longer than one day?

The MGMT$AVAIL_ALERT_HISTORY file contains a list of all available outages. To view the reasons for host outages lasting longer than one day, enter the following query:

mgmt$avail_alert_history

SELECT target_name, target_type, collection_timestamp, message
FROM   mgmt$avail_alert_history
WHERE  violation_level IN (20,25,125,325)
AND  alert_duration > 1
AND  target_type    = 'host' ;

20.9.11 How do I generate a list of all targets currently blacked out?

The MGMT$AVAILABILITY_CURRENT file contains an overview of the current state of all targets. To generate a list of all targets currently blacked out, enter the following query:

SELECT target_name, target_type, start_timestamp
FROM   mgmt$availability_current
WHERE  availability_status = 'Blackout';

20.9.12 How do I view a list of availability state changes made to targets in the repository in the last 30 days?

The MGMT$AVAILABILITY_HISTORY file contains the history of all availability state changes for all targets in the repository. To view a list of availability state changes made to targets in the repository in the last 30 days, enter the following query:

SELECT target_name, target_type, collection_timestamp, start_timestamp, end_timestamp, availability_status
FROM   mgmt$availability_history
WHERE  target_type   = 'oracle_emrep'
AND  end_timestamp > SYSDATE-30
ORDER BY start_timestamp;

20.9.13 How do I find all hosts with more than 90 percent CPU utilization?

The MGMT$METRIC_CURRENT file contains the last known data points for all metrics on all targets. To find all hosts with more than 90 percent CPU utilization, enter the following query:

SELECT target_name, collection_timestamp, value
FROM   mgmt$metric_current
WHERE  target_type   = 'host'
AND  metric_name   = 'Load'
AND  metric_column = 'cpuUtil'
AND  value > 90;

20.9.14 How do I find the minimum and maximum number of sessions for all OMS applications in the last 30 days?

The MGMT$METRIC_DAILY file contains the daily rollup data of all metrics for all targets. To find the minimum and maximum number of sessions for all Oracle Management Server (OMS) applications in the last 30 days, enter the following query:

SELECT target_name, MIN(MINIMUM) min_val, MAX(maximum) max_val
FROM   mgmt$metric_daily
WHERE  target_type    = 'oc4j'
AND  target_name LIKE '%OC4J_EM'
AND  metric_name    = 'oc4j_instance_rollup'
AND  metric_column  = 'session.active'
AND  rollup_timestamp > SYSDATE-30
GROUP BY target_name;

20.9.15 How do I find the loader throughput of the OMS on the last day?

The MGMT$METRIC_DETAILS file contains metric data points uploaded by the Agent. To find the loader throughput of the OMS on the last day, enter the following query:

SELECT key_value,
ROUND(MIN(value),2) min_val, ROUND(MAX(value),2) max_val
FROM   mgmt$metric_details
WHERE  target_type   = 'oracle_emrep'
AND  metric_name   = 'Management_Loader_Status'
AND  metric_column = 'load_processing'
AND  collection_timestamp BETWEEN SYSDATE-2 AND SYSDATE-1
GROUP BY key_value;

20.9.16 How do I find the minimum and maximum number from the last full day for the performance of Oracle Enterprise Manager Cloud Control?

The MGMT$METRIC_HOURLY file contains the hourly rollup data of all metrics for all targets. To find the minimum and maximum number from the last full day for the performance of Oracle Enterprise Manager Cloud Control, enter the following query:

'Grid Control'

SELECT MIN(MINIMUM) min_val, MAX(maximum) max_val
FROM   mgmt$metric_hourly
WHERE  rollup_timestamp BETWEEN TRUNC(SYSDATE-1) AND TRUNC(SYSDATE)
AND  target_name   = 'Grid Control'
AND  target_type   = 'website'
AND  metric_name   = 'Performance'
AND  metric_column = 'PerformanceValue'
AND  key_value     = 'Perceived Time per Page (ms)';

20.9.17 How do I view a list of all targets with the Response metric disabled?

The MGMT$TARGET_METRIC_COLLECTIONS file contains all metric collection settings for all targets in the Management Repository. To view a list of all targets with the Response metric disabled, enter the following query:

SELECT target_name, target_type, collection_frequency
FROM   mgmt$target_metric_collections
WHERE  is_enabled  = 0
AND  metric_name = 'Response';

20.9.18 How do I view a list of all database or RAC targets that have the tablespace thresholds set to less than 85 for warning and 95 for critical?

The MGMT$TARGET_METRIC_SETTINGS file contains all metric threshold settings for all targets in the repository. To view a list of all database or Real Application Clusters (RAC) targets that have the tablespace thresholds set to less than 85 for warning and 95 for critical, enter the following query:

SELECT target_name, target_type, warning_threshold, critical_threshold
FROM   mgmt$target_metric_settings
WHERE  target_type IN ('oracle_database','rac_database')
AND  metric_name   = 'problemTbsp'
AND  metric_column = 'pctUsed'
AND  NVL(TRIM(warning_threshold),0)  < 85
AND  NVL(TRIM(critical_threshold),0) < 95;

20.10 Operating System Views

How do I retrieve information from MGMT$OS_SUMMARY for a specific host from the Management Repository?

20.10.1 How do I retrieve information from MGMT$OS_SUMMARY for a specific host from the Management Repository?

The following query retrieves information from MGMT$OS_SUMMARY for a specific host from the Management Repository:

SELECT * FROM MGMT$OS_SUMMARY
WHERE target_name = 'target_name' and target_type = 'host';

If you know a host name, you can use a similar query to access any of the views to retrieve information at the metric level for a particular host.

Aggregate queries can be written to provide counts of OS as follows:

SELECT name,base_version,count(*)
FROM mgmt$os_summary
group by name,base_version ;

Index
A  B  C  D  E  H  I  J  L  M  O  P  R  S  T  V

A

application deployment views, 1, 13

B

blackout views, 2

C

compliance views, 4

configuration management views, 5

custom configuration specification views, 5.2

custom-developed targets, 1.1

D

database configuration views, 5.3

E

ECM, see Enterprise Configuration Management

Enterprise Configuration Management views, 5.4

Enterprise Manager,extending, 1.1

events views, 6, 13.2

extensibility, 1.1

H

hardware views, 7

I

inventory views, 8

J

job views, 9

L

Linux patching views, 10

M

Management Repository views

about, 1.1

examples, 20

Management Repository,access, 1.1 management template views, 11 metric views, 12 MGMT$AGENTS_MONITORING_TARGETS, 18.1 MGMT$ALERT_CURRENT, 14.1 MGMT$ALERT_HISTORY, 14.6 MGMT$APPL_PATCH_AND_PATCHSET, 8.2.2 MGMT$APPLIED_PATCHES, 8.2.4 MGMT$APPLIED_PATCHSETS, 8.2.5 MGMT$AVAIL_ALERT_HISTORY, 14.7 MGMT$AVAILABILITY_CURRENT, 14.4 MGMT$AVAILABILITY_HISTORY, 14.5 MGMT$BLACKOUT_HISTORY, 2.1 MGMT$BLACKOUTS, 2.2 MGMT$CA_EXECUTIONS, 9.2 MGMT$CA_TARGETS, 9.1 MGMT$CCC_ALL_OBS_BUNDLES, 4.28 MGMT$CCC_ALL_OBSERVATIONS, 4.29 MGMT$CCC_ALL_VIOLATIONS, 4.30 MGMT$CCS_DATA, 5.2.4 MGMT$CCS_DATA_SOURCE_VISIBLE, 5.2.1 MGMT$CCS_DATA_VISIBLE, 5.2.2, 5.2.3 MGMT$COMPLIANCE_STANDARD, 4.2 MGMT$COMPLIANCE_STANDARD_GROUP, 4.3 MGMT$COMPLIANCE_STANDARD_RULE, 4.1 MGMT$COMPLIANCE_SUMMARY, 4.32 MGMT$COMPLIANCE_TREND, 4.33 MGMT$COMPLIANT_TARGETS, 4.31 MGMT$COMPOSITE_CS_EVAL_SUMMARY, 4.5 MGMT$CS_EVAL_SUMMARY, 4.4 MGMT$CS_GROUP_EVAL_SUMMARY, 4.7 MGMT$CS_RULE_EVAL_SUMMARY, 4.6 MGMT$CS_TARGET_ASSOC, 4.8 MGMT$CSA_COLLECTIONS, 5.1, 5.1.1 MGMT$CSA_FAILED, 5.1.2 MGMT$CSA_HOST_COOKIES, 5.1.5 MGMT$CSA_HOST_CPUS, 5.1.8 MGMT$CSA_HOST_CUSTOM, 5.1.6 MGMT$CSA_HOST_IOCARDS, 5.1.9 MGMT$CSA_HOST_NICS, 5.1.10 MGMT$CSA_HOST_OS_COMPONENTS, 5.1.3 MGMT$CSA_HOST_OS_FILESYSEMS, 5.1.12 MGMT$CSA_HOST_OS_PROPERTIES, 5.1.11 MGMT$CSA_HOST_RULES, 5.1.7 MGMT$CSA_HOST_SW, 5.1.4 MGMT$CSR_CURRENT_VIOLATION, 4.9 MGMT$CSR_VIOLATION_CONTEXT, 4.10 MGMT$DB_CONTROLFILES, 5.3.3 MGMT$DB_DATAFILES, 5.3.2 MGMT$DB_DBNINSTANCEINFO, 5.3.4 MGMT$DB_FEATUREUSAGE, 5.3.5 MGMT$DB_INIT_PARAMS, 5.3.6 MGMT$DB_LICENSE, 5.3.7 MGMT$DB_OPTIONS, 5.3.12 MGMT$DB_REDOLOGS, 5.3.8 MGMT$DB_ROLLBACK_SEGS, 5.3.9 MGMT$DB_SGA, 5.3.10 MGMT$DB_TABLESPACES, 5.3.1 MGMT$DB_TABLESPACES_ALL, 5.3.11 MGMT$ECM_CMP_JOB_LAST_RESULTS, 5.4.2 MGMT$ECM_CMP_JOBS, 5.4.1 MGMT$ECM_CMP_RPT_CCS_DS, 5.4.3 MGMT$ECM_CMP_RPT_CCS_DS_DTLS, 5.4.4 MGMT$ECM_CMP_RPT_CCS_PD_ALL, 5.4.5 MGMT$ECM_CMP_RPT_CCS_PD_DIFFS, 5.4.6 MGMT$ECM_CMP_RPT_CI_DIFFS, 5.4.7 MGMT$ECM_CMP_VISIBLE_CONFIGS, 5.4.8 MGMT$EM_ECM_HOST_VIRTUAL, 7.1.5 MGMT$EM_ECM_MOS_PROPERTIES, 18.2 MGMT$EM_ECM_TARGET_FRESHNESS, 18.3 MGMT$EM_HOMES_PLATFORM, 8.2.1 MGMT$EM_RULE_VIOL_CTXT_DEF, 4.11 MGMT$ESA_ALL_PRIVS_REPORT, 16.1 MGMT$ESA_ANY_DICT_REPORT, 16.2 MGMT$ESA_ANY_PRIV_REPORT, 16.3 MGMT$ESA_AUDIT_SYSTEM_REPORT, 16.4 MGMT$ESA_BECOME_USER_REPORT, 16.5 MGMT$ESA_CATALOG_REPORT, 16.6 MGMT$ESA_CONN_PRIV_REPORT, 16.7 MGMT$ESA_CREATE_PRIV_REPORT, 16.8 MGMT$ESA_DBA_GROUP_REPORT, 16.9 MGMT$ESA_DBA_ROLE_REPORT, 16.10 MGMT$ESA_DIRECT_PRIV_REPORT, 16.11 MGMT$ESA_EXMPT_ACCESS_REPORT, 16.12 MGMT$ESA_KEY_OBJECTS_REPORT, 16.13 MGMT$ESA_OH_OWNERSHIP_REPORT, 16.14 MGMT$ESA_OH_PERMISSION_REPORT, 16.15 MGMT$ESA_POWER_PRIV_REPORT, 16.16 MGMT$ESA_PUB_PRIV_REPORT, 16.17 MGMT$ESA_SYS_PUB_PKG_REPORT, 16.18 MGMT$ESA_TABSP_OWNERS_REPORT, 16.19 MGMT$ESA_TRC_AUD_PERM_REPORT, 16.20 MGMT$ESA_WITH_ADMIN_REPORT, 16.21 MGMT$ESA_WITH_GRANT_REPORT, 16.22 MGMT$ESM_COLLECTION_LATEST, 16.23 MGMT$ESM_FILE_SYSTEM_LATEST, 16.24 MGMT$ESM_PORTS_LATEST, 16.25 MGMT$ESM_SERVICE_LATEST, 16.26 MGMT$ESM_STACK_LATEST, 16.27 MGMT$EVENT_ANNOTATION, 6.7, 13.2.7 MGMT$EVENTS, 6.6, 13.2.6 MGMT$EVENTS_LATEST, 6.5, 13.2.5 MGMT$HOMES_AFFECTED, 8.2.3 MGMT$HOSTPATCH_GROUPS, 10.2 MGMT$HOSTPATCH_GRP_COMPL_HIST, 10.3 MGMT$HOSTPATCH_HOST_COMPL, 10.4 MGMT$HOSTPATCH_HOSTS, 10.1 MGMT$HW_CPU_DETAILS, 7.1.1 MGMT$HW_IO_DEVICES, 7.1.4 MGMT$HW_NIC, 7.1.2 MGMT$HW_NIC_BONDS, 7.1.3 MGMT$INCIDENT_ANNOTATION, 6.4, 13.2.4 MGMT$INCIDENT_CATEGORY, 6.2, 13.2.2 MGMT$INCIDENT_TARGET, 6.3, 13.2.3 MGMT$INCIDENTS, 6.1, 13.2.1 MGMT$J2EE_APPLICATION, 13.1.1 MGMT$J2EEAPP_EJBCOMPONENT, 13.1.2 MGMT$J2EEAPP_JRFWS, 13.1.3 MGMT$J2EEAPP_JRFWSOPER, 13.1.4 MGMT$J2EEAPP_JRFWSPOLICY, 13.1.5 MGMT$J2EEAPP_JRFWSPORT, 13.1.6 MGMT$J2EEAPP_WEBAPPCOMPONENT, 13.1.7 MGMT$J2EEAPP_WSCONFIG, 13.1.8 MGMT$J2EEAPP_WSPORTCONFIG, 13.1.9 MGMT$JOB_ANNOTATIONS, 9.7 MGMT$JOB_EXECUTION_HISTORY, 9.5 MGMT$JOB_NOTIFICATION_LOG, 9.8 MGMT$JOB_STEP_HISTORY, 9.6 MGMT$JOB_TARGETS, 9.4 MGMT$JOBS, 9.3 MGMT$MANAGEABLE_ENTITIES, 18.4 MGMT$METRIC_CATEGORIES, 12.1 MGMT$METRIC_COLLECTION, 12.2 MGMT$METRIC_CURRENT, 14.9 MGMT$METRIC_DAILY, 14.11 MGMT$METRIC_DETAILS, 14.8 MGMT$METRIC_ERROR_CURRENT, 12.3 MGMT$METRIC_ERROR_HISTORY, 12.4 MGMT$METRIC_HOURLY, 14.10 MGMT$OH_CLONE_PROPERTIES, 8.3.4 MGMT$OH_COMP_DEP_RULE, 8.3.7 MGMT$OH_COMP_INST_TYPE, 8.3.6 MGMT$OH_COMPONENT, 8.3.5 MGMT$OH_CRS_NODES, 8.3.3 MGMT$OH_DEP_HOMES, 8.3.2 MGMT$OH_FILE, 8.3.14 MGMT$OH_HOME_INFO, 8.3.1 MGMT$OH_INSTALLED_TARGETS, 8.3.17 MGMT$OH_INV_SUMMARY, 8.3.16 MGMT$OH_PATCH, 8.3.10 MGMT$OH_PATCH_FIXED_BUG, 8.3.12 MGMT$OH_PATCHED_COMPONENT, 8.3.11 MGMT$OH_PATCHED_FILE, 8.3.13 MGMT$OH_PATCHSET, 8.3.8 MGMT$OH_VERSIONED_PATCH, 8.3.9 MGMT$OS_COMPONENTS, 15.2 MGMT$OS_FS_MOUNT, 15.5 MGMT$OS_HW_SUMMARY, 15.3 MGMT$OS_INIT_SERVICES, 15.11 MGMT$OS_KERNEL_PARAMS, 15.6 MGMT$OS_LIMITS, 15.10 MGMT$OS_MODULES, 15.9 MGMT$OS_PATCH_SUMMARY, 15.4 MGMT$OS_PATCHES, 15.7 MGMT$OS_PROPERTIES, 15.8 MGMT$OS_SUMMARY, 15.1 MGMT$PA_RECOM_METRIC_SOURCE, 8.3.15 MGMT$PROBLEM_ANNOTATION, 6.9 MGMT$PROBLEMS, 6.8 MGMT$SERVICETAG_INSTANCES, 7.2.1 MGMT$SERVICETAG_REGISTRY, 7.2.2 MGMT$STORAGE_REPORT_DATA, 17.1 MGMT$STORAGE_REPORT_DISK, 17.5 MGMT$STORAGE_REPORT_ISSUES, 17.4 MGMT$STORAGE_REPORT_KEYS, 17.2 MGMT$STORAGE_REPORT_LOCALFS, 17.7 MGMT$STORAGE_REPORT_NFS, 17.8 MGMT$STORAGE_REPORT_PATHS, 17.3 MGMT$STORAGE_REPORT_VOLUME, 17.6 MGMT$TARGET, 8.1, 8.1.1 MGMT$TARGET_ASSOCIATIONS, 8.1.4 MGMT$TARGET_FLAT_MEMBERS, 8.1.6 MGMT$TARGET_MEMBERS, 8.1.5 MGMT$TARGET_METRIC_COLLECTIONS, 14.2 MGMT$TARGET_METRIC_SETTINGS, 14.3 MGMT$TARGET_PROPERTIES, 8.1.8 MGMT$TARGET_TYPE, 8.1.2 MGMT$TARGET_TYPE_DEF, 8.1.3 MGMT$TARGET_TYPE_PROPERTIES, 8.1.7 MGMT$TEMPLATE_METRIC_SETTINGS, 11.4 MGMT$TEMPLATE_METRICCOLLECTION, 11.3 MGMT$TEMPLATE_POLICY_SETTINGS, 11.2 MGMT$TEMPLATES, 11.1 MGMT$VT_EXA_CTRL_VSERVER_TAGS, 19.8 MGMT$VT_VM_CONFIG, 19.1, 19.1 MGMT$VT_VM_SW_CFG, 19.2 MGMT$VT_VM_VDISKS, 19.6 MGMT$VT_VM_VNIC, 19.3 MGMT$VT_VSP_CONFIG, 19.9 MGMT$WEBLOGIC_APPLICATIONS, 13.3.1 MGMT$WEBLOGIC_DOMAIN, 13.4.1 MGMT$WEBLOGIC_EJBCOMPONENT, 13.3.2 MGMT$WEBLOGIC_FILESTORE, 13.3.3 MGMT$WEBLOGIC_JDBCDATASOURCE, 13.3.4 MGMT$WEBLOGIC_JDBCMULTIDS, 13.3.5 MGMT$WEBLOGIC_JMSCONNFACTORY, 13.3.6 MGMT$WEBLOGIC_JMSQUEUE, 13.3.7 MGMT$WEBLOGIC_JMSSERVER, 13.3.8 MGMT$WEBLOGIC_JMSTOPIC, 13.3.9 MGMT$WEBLOGIC_JOLTCONNPOOL, 13.3.10 MGMT$WEBLOGIC_JVMSYSPROPS, 13.3.11 MGMT$WEBLOGIC_MACHINE, 13.3.12 MGMT$WEBLOGIC_NETWORK_CHANNELS, 13.3.13 MGMT$WEBLOGIC_NODEMANAGER, 13.3.14 MGMT$WEBLOGIC_OAMCONFIG, 13.4.3 MGMT$WEBLOGIC_OPSSSYSPROP, 13.4.2 MGMT$WEBLOGIC_RACONFIG, 13.3.15 MGMT$WEBLOGIC_RAOUTBOUNDCONFIG, 13.3.16 MGMT$WEBLOGIC_RESOURCECONFIG, 13.3.17 MGMT$WEBLOGIC_SERVER, 13.3.18 MGMT$WEBLOGIC_STARTSHUTCLASSES, 13.3.19 MGMT$WEBLOGIC_VIRTUALHOST, 13.3.20 MGMT$WEBLOGIC_WEBAPPCOMPONENT, 13.3.21 MGMT$WEBLOGIC_WORKMANAGER, 13.3.22 MGMT$WEBLOGIC_WSCONFIG, 13.3.23 monitoring views, 14

O

operating system views, 15

Oracle home directory patching views, 8.2

P

patching, 1.1

R

repository base tables, 1.1

repository schema, 1.1

S

security views, 16

service tag views, 7.2

SQL Developer, 1.1

storage reporting views, 17

T

target views, 18

V

views

application deployment, 1, 13

blackout, 2

compliance, 4

configuration management, 5

custom configuration specification, 5.2

database configuration, 5.3

Enterprise Configuration Management, 5.4

events, 6, 13.2

examples, 20

hardware, 7

inventory, 8

job, 9

Linux patching, 10

management template, 11

metric, 12

monitoring, 14

operating system, 15

Oracle home directory patching, 8.2

security, 16

service tag, 7.2

storage reporting, 17

target, 18

Virtualization Target Views, 19

Oracle Legal Notices

Copyright Notice

Copyright © 1994-2016, Oracle and/or its affiliates. All rights reserved.

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

Restricted Rights Notice

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Hazardous Applications Notice

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Trademark Notice

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

Third-Party Content, Products, and Services Disclaimer

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Alpha and Beta Draft Documentation Notice

If this document is in preproduction status:

This documentation is in preproduction status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.

Private Alpha and Beta Draft Documentation Notice

If this document is in private preproduction status:

The information contained in this document is for informational sharing purposes only and should be considered in your capacity as a customer advisory board member or pursuant to your beta trial agreement only. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described in this document remains at the sole discretion of Oracle.

This document in any form, software or printed matter, contains proprietary information that is the exclusive property of Oracle. Your access to and use of this confidential material is subject to the terms and conditions of your Oracle Master Agreement, Oracle License and Services Agreement, Oracle PartnerNetwork Agreement, Oracle distribution agreement, or other license agreement which has been executed by you and Oracle and with which you agree to comply. This document and information contained herein may not be disclosed, copied, reproduced, or distributed to anyone outside Oracle without prior written consent of Oracle. This document is not part of your license agreement nor can it be incorporated into any contractual agreement with Oracle or its subsidiaries or affiliates.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.