This chapter contains these topics:
Processing Option | Processing Options Requiring Further Description |
---|---|
FORMAT OPTIONS: | |
1. Enter the type of instructions to be defined:
1 = Putaway 2 = Picking 3 = Replenishment (If left blank, format 1 is used) |
Processing Option | Processing Options Requiring Further Description |
---|---|
DEFAULT VALUES: | |
1. Order Type | |
2. Receipt Document Type | If an order line does not display for receipt, check the Next Status on the line (via Purchase Order Entry- P4311) to verify it matches one of the three status codes you set below. |
Incoming Acceptable Next Status Codes: | |
3. Status Code 1 | |
4. Status Code 2 | |
5. Status Code 3 | |
Outgoing Next Status Codes: | |
6. Partial receipt | If you perform partial receipts, you want to update the next status on purchase order lines:
1. To indicate that a partial receipt has taken place, and 2. So you can lock down the status in Purchase Order Entry so users cannot make changes to partially received lines. |
7. Close balance of line | Should normally be 999. |
8. Cancel balance of line | Should normally be 999. |
PROMPTING CONTROL:
Enter a '1' to: |
|
9. Select all lines for receipt. | |
10. Be prompted to accept the receipt. | |
11. Display lot/layer information. | |
12. Display Sales Order Backorders. | Set this processing option to 1 to have the Backorder Release screen (V42117) display after you perform a receipt to release backorders that might exist for the items you just received. |
13. Record serial number information for inventory items. | |
14. Protect lot number, lot expiration date, and lot status on orders with automatically generated or assigned lot numbers. | |
15. Enter a '1' to protect prices, or a '2' to make prices non-display.
If left blank, the update of prices is allowed. |
|
16. Enter a '1' to require manual entry of the quantity.
If left blank, the quantity field will be loaded. |
|
17. Enter a '1' to display description.
If left blank, the item/account number will be displayed. |
|
18. Enter the format to be displayed.
1 = Receipts by Purchase Order 2 = Receipts by Item 3 = Receipts by G/L Account (If left blank, format 1 is used.) |
|
LANDED COST PROCESSING: | |
19. Enter a '1' to display the landed cost screen, or a '2' to perform blind landed cost processing.
If left blank, no landed cost processing is performed. |
|
TOLERANCE CHECKING:
Enter a '1' for a warning message, or a '2' to prohibit entry. If left blank, no tolerance checking is performed. |
|
20. Quantity, Unit Cost, Amount | |
21. Receipt Date | |
ITEM BRANCH/LOCATION PROCESSING: | |
22. Enter a '1' to update the supplier when an item is purchased the first time, or a '2' to update the supplier every time the item is purchased.
If left blank, no supplier update is performed. |
Use this option to update the Supplier address number in the branch record for an inventory item (P41026). The address number is then used by the Purchase Order Generator program (P43011) to create orders for the supplier. |
23. Enter a '1' to default the Location and Lot Number from the primary item balance location, if the Location and Lot Number are both blank. | |
DREAM WRITER VERSIONS:
Enter the version for each program: If left blank, ZJDE0001 will be used. |
|
24. Open Order Inquiry (P430301) | |
25. G/L Functional Server (XT0911Z1) | |
26. SO Backorder Release (P42117) | |
27. Receipt Traveler (P43512) | |
28. Receipt Routing (P43250) | |
DOCUMENT PROCESSING: | |
29. Enter a '1' to automatically print a Receipt Traveler Document following each receipt. | |
KIT PROCESSING: | |
30. Enter a '1' to display the kit parent item, or a '2' to display the kit component items.
If left blank, no kit information is displayed. Note: Stock items must be received at the component level. |
|
SUPPLIER ANALYSIS: | |
31. Enter a '1' to capture supplier analysis information.
If left blank, no supplier analysis information is captured. |
Enter 1 to have the system create a record in the Supplier/Item Relationship file (F43090) if it doesn't already exist, and also to update order information to the file. |
ASSOCIATED TEXT PROCESSING: | |
32. Enter a '1' to purge the associated text when the line is fully received.
If left blank, the text is retained. |
|
RECEIPT ACKNOWLEDGMENT: | |
33. Enter a '1' to send a PPAT message to the purchase order originator regarding the receipt. | |
34. Enter the next status code that the Sales Order should be updated to upon full receipt of a direct ship purchase order line. | Use this option to update the Next Status on a direct ship sales order that corresponds to a purchase order to ensure that it is ready for ship confirmation or update. |
RECEIPT ROUTING: | |
35. Enter a '1' to initiate the receipt routing process.
If left blank, all items will be received directly into stock. |
|
36. Enter the default route type to be used to search for a receipt route.
If left blank, the program will search for route type equivalent to blank. |
|
SUMMARIZATION: | |
37. Enter a '1' to summarize journal entries.
If left blank, journal entries are written in detail. Note: If tracking commitments in the PA/PU ledgers, this option may NOT be used. |
|
WAREHOUSE PROCESSING: | |
38. Enter the Directed Putaway mode:
Blank =No Directed Putaway Requests 1 = Request Putaway only 2 = Request Putaway and process using the subsystem 3 = Receive directly to reserved locations (No requests). |
|
39. If processing putaway requests through the subsystem, enter the DREAM Writer version to be used.
If blank, XJDE0001 is used. (See Form ID P46171). |
|
40. Enter the DREAM Writer version of On-Line Reservations to be used.
If blank, ZJDE0001 is used. (See Form ID P46130) |
|
41. Enter a '1' to perform warehouse Cross-Docking. This is only valid with processing option 12 to perform sales backorder processing set on. | |
CURRENCY PROCESSING: | |
42. Enter the date to be used when retrieving the currency exchange rate.
If left blank, the purchase order exchange rate will be used. 1 = G/L Date 2 = Current Date |
|
43. Enter a '1' to protect the exchange rate field. | |
BULK ITEM PROCESSING: | |
44. Enter '1' to record the difference between ambient and standard quantities received as a temperature gain/loss.
Enter '2' to update the unit cost as the extended cost divided by the standard quantity. Leave blank if quantities are purchased and received in standard. |
|
45. Enter a '1' if you want Receipts Routing integration with the Four Point Analysis file. | |
46. Enter the DREAM Writer Version for the Bulk Stock Movement program called for Lot Controlled product.
If left blank, ZJDE0005 will be used. |
|
DIRECT SHIP ORDER PROCESSING:
(LOAD & DELIVERY MANAGEMENT ONLY) |
|
47. Enter a '1' if related sales order lines should be automatically load and deliver confirmed. | |
48. Enter the sales order next status code beyond which sales orders will not be automatically load and deliver confirmed. | |
49. Enter the version of the transportation transaction server to be used to automatically load and deliver confirm orders. | |
QUALITY MANAGEMENT: | |
50. Enter the version of Test Results Revisions (P3711) to call.
If left blank, ZJDE0002 will be used. |
|
CASCADING RECEIPTS: | |
51. Enter '1' to initiate Cascading Receipts | |
52. Enter the type of tolerance check to perform in Cascading Receipts
1 = Percentage Tolerance 2 = Units Tolerance |
|
53. Enter the tolerance value. This is used in conjunction with the previous option. | |
G/L POST | |
54. Enter a '1' to automatically submit the G/L Post.
If left blank, post WILL NOT be automatically submitted. |
|
55. Enter the DREAM Writer version of the G/L Post to be used.
If left blank, ZJDE0033 will be used. This is used in conjunction with the previous option. |
|
56. Enter a value for processing when the G/L Date of the receipt is outside the fiscal year of the G/L Date on the original order
' '= Ignore '1' = Issue Warning '2' = Issue Hard error |
Set this option to accommodate encumbrance and commitment accounting such that relief of a commitment cannot occur after the year in which the commitment was entered. Commitment accounting only applies to order lines types with an Inventory Interface of A or B. |
Processing Option | Processing Options Requiring Further Description |
---|---|
DISPLAY OPTION: | |
1. Enter the type of requests to view:
1 = Putaway Requests 2 = Pick Requests 3 = Replenishment Requests (If blank, putaway requests will display.) |
|
DEFAULT VALUE: | |
2. Enter the default Request Status to use.
If blank, the "Ready to Suggest" status (200) is used. |
|
PICKING OPTION: | |
3. Enter the override next status for sales order lines when requests are canceled. | |
PUTAWAY OPTIONS: | |
4. Enter a '1' to view credit order putaways. |
Processing Option | Processing Options Requiring Further Description |
---|---|
DEFAULT VALUES: | |
1. Order Type | |
RECORD SELECTION CONTROL: | |
2. Enter the From Status code and Thru Status code to be used for Purchase Order Selection:
From Status Code Thru Status Code |
Processing Option | Processing Options Requiring Further Description |
---|---|
UPDATE OPTION: | |
1. Enter a '1' to re-suggest location reservations for selected purchase order lines.
If blank, only lines without open reservations will be suggested. |
|
MOVE TAG OPTIONS:
Enter a '1' to: |
|
2. Print move tags. | |
3. Print bar coded information. | |
4. Print the U/M structure. | |
5. Print Mark For address. | |
6. Enter the item/location quantity to be printed on the tags:
' ' = Do not print a quantity. '1' = On-hand quantity. '2' = On-hand + inbound - outbound - committed. |
|
7. Enter the number of duplicate copies to print for each tag. | |
8. Enter the DREAM Writer version to be used for the desired printer overrides.
If blank, XJDE0001 is used (See Form ID P46473). |
|
AUDIT CONTROL: | |
9. Enter a '1' to generate the audit Report,
'2' to generate the Audit along with a glossary for any messages, or a '3' to generate the report with a complete glossary at the end. If blank, no report will be generated. |
|
10. Enter the DREAM Writer version of the Selection Audit report to use.
If blank, XJDE0001 is used. (See form ID P46475.) |
Processing Option | Processing Options Requiring Further Description |
---|---|
TASK AND TRIP ASSIGNMENT: | |
1. Enter a '1' to do immediate task and trip assignment.
If blank, no tasks/trips will be assigned. |
|
2. Enter the DREAM Writer version of the Task and Trip Assignment program to use.
If blank, XJDE0001 is used. (See Form ID P46471). |
|
AUDIT CONTROL: | |
3. Enter a '1' to generate the audit report,
'2' to generate the audit along with a glossary for any messages, or a '3' to generate the report with a complete glossary at the end. If blank, no report will be generated |
|
4. Enter the DREAM Writer version of the Selection Audit report to use for the desired printer overrides.
If blank, XJDE0001 is used. (See Form ID P46475.) |
|
CONFIRMATION CONTROL: | |
5. Enter a '1' to automatically confirm suggestions. | |
6. Enter the override next status for the confirmed sales order lines.
(Pick Processing Only). |
|
RESUGGESTIONS: | |
7. Enter a '1' to resuggest movement requests.
If blank, only new requests will be processed. |
|
REPLENISHMENT CONTROL: | |
8. Enter the method to use for replenishment quantities.
If blank, method '2' is used. '1' = Economic Replenishment. The quantity to replenish is retrieved from the fixed location definition. '2' = Maximum Replenishment. The quantity to replenish is the quantity which would fill the location. |
|
9. Enter the DREAM writer version of the Task and Trip Assignment program to run for replenishments.
If blank XJDE0003 is used. (See form ID P46471) |
|
LOT PROCESSING: | |
10. Enter '1' to include immature lots (those not yet in effect).
If left blank, an immature lot will not be counted as available. |