|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
The motherboard is shipped installed in a blade enclosure assembly. Do not remove the motherboard from the blade enclosure. Remove components from the old blade enclosure, and install these components into the new enclosure and motherboard assembly.
Note - This component must be serviced by an Oracle-qualified service technician.
For the location of components, see Replaceable Blade Components.
When the replacement of either a motherboard or service processor results in an incompatibility between the hardware revision of the component and the firmware version of either the SP or the BIOS, the recommendation is to maintain compatibility with the SP firmware.
Note the storage drive positions (0, 1, 2, 3).
Note the DIMM positions.
Note the processor positions (0 and 1).
Note the flash drive positions (0 and 1).
Caution - The position of each filler panel must match the position in the original blade.
Note - Do not power on the server.
See Update FRUID.