|Skip Navigation Links|
|Exit Print View|
|Netra Blade X3-2B (formerly Sun Netra X6270 M3 Server Module) HTML Document Collection|
RAID configuration is most often completed before you install an operating system and for the boot disk. However, it is possible to create a RAID volume on other non-boot disks after installing an operating system.
To create RAID volumes after an OS is installed, and manage blade RAID resources, choose one of the following tools:
Oracle System Assistant: You can use Oracle System Assistant to create RAID 0 or 1 level volumes and prepare drives for OS installation. See Accessing Oracle System Assistant.
Oracle Hardware Management Pack 2.2: You can use the raidconfig commands contained in this software's Oracle Server CLI Tools component to create and manage RAID volumes on your server. For more information about accessing Oracle Hardware Management Pack, see Accessing Oracle Hardware Management Pack.
(SGX-SAS6-REM-Z only) LSI SAS2 2008 RAID Management Utility: You can use the sas2ircu commands contained in the LSI SAS2 Integrated Configuration Utility to configure and manage RAID volumes on your server.
You can download the SAS2IRCU software for your operating system from the Utilities section at the following location:http://www.lsi.com/sep/Pages/oracle/sg_x_sas6-rem-z.aspx
(SGX-SAS6-R-REM-Z only) LSI MegaCLI or MegaRAID Storage Manager: You can use the LSI MegaCLI command-line tool or the MegaRAID Storage Manager web browser to configure and manage RAID volumes for SGX-SAS6-R-REM-Z.
You can download the MegaCLI and MegaRAID Storage Manager software for your operating system from the Utilities section at the following location: http://www.lsi.com/sep/Pages/oracle/sg_x_sas6-r-rem-z.aspx