JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Writing Device Drivers     Oracle Solaris 11.1 Information Library
search filter icon
search icon

Document Information


Part I Designing Device Drivers for the Oracle Solaris Platform

1.  Overview of Oracle Solaris Device Drivers

2.  Oracle Solaris Kernel and Device Tree

3.  Multithreading

4.  Properties

5.  Managing Events and Queueing Tasks

6.  Driver Autoconfiguration

7.  Device Access: Programmed I/O

8.  Interrupt Handlers

9.  Direct Memory Access (DMA)

10.  Mapping Device and Kernel Memory

11.  Device Context Management

12.  Power Management

13.  Hardening Oracle Solaris Drivers

14.  Layered Driver Interface (LDI)

Part II Designing Specific Kinds of Device Drivers

15.  Drivers for Character Devices

16.  Drivers for Block Devices

17.  SCSI Target Drivers

18.  SCSI Host Bus Adapter Drivers

19.  Drivers for Network Devices

20.  USB Drivers

21.  SR-IOV Drivers

Part III Building a Device Driver

22.  Compiling, Loading, Packaging, and Testing Drivers

23.  Debugging, Testing, and Tuning Device Drivers

24.  Recommended Coding Practices

Debugging Preparation Techniques

Use a Unique Prefix to Avoid Kernel Symbol Collisions

Use cmn_err() to Log Driver Activity

Use ASSERT() to Catch Invalid Assumptions

Use mutex_owned() to Validate and Document Locking Requirements

Use Conditional Compilation to Toggle Costly Debugging Features

Declaring a Variable Volatile


Periodic Health Checks

Part IV Appendixes

A.  Hardware Overview

B.  Summary of Oracle Solaris DDI/DKI Services

C.  Making a Device Driver 64-Bit Ready

D.  Console Frame Buffer Drivers

E.  pci.conf File


Debugging Preparation Techniques

Driver code is more difficult to debug than user programs because:

Be sure to build debugging support into your driver. This support facilitates both maintenance work and future development.

Use a Unique Prefix to Avoid Kernel Symbol Collisions

The name of each function, data element, and driver preprocessor definition must be unique for each driver.

A driver module is linked into the kernel. The name of each symbol unique to a particular driver must not collide with other kernel symbols. To avoid such collisions, each function and data element for a particular driver must be named with a prefix common to that driver. The prefix must be sufficient to uniquely name each driver symbol. Typically, this prefix is the name of the driver or an abbreviation for the name of the driver. For example, xx_open() would be the name of the open(9E) routine of driver xx.

When building a driver, a driver must necessarily include a number of system header files. The globally-visible names within these header files cannot be predicted. To avoid collisions with these names, each driver preprocessor definition must be given a unique name by using an identifying prefix.

A distinguishing driver symbol prefix also is an aid to deciphering system logs and panics when troubleshooting. Instead of seeing an error related to an ambiguous attach() function, you see an error message about xx_attach().

Use cmn_err() to Log Driver Activity

Use the cmn_err(9F) function to print messages to a system log from within the device driver. The cmn_err(9F) function for kernel modules is similar to the printf(3C) function for applications. The cmn_err(9F) function provides additional format characters, such as the %b format to print device register bits. The cmn_err(9F) function writes messages to a system log. Use the tail(1) command to monitor these messages on /var/adm/messages.

% tail -f /var/adm/messages

Use ASSERT() to Catch Invalid Assumptions

Assertions are an extremely valuable form of active documentation. The syntax for ASSERT(9F) is as follows:


The ASSERT() macro halts the execution of the kernel if a condition that is expected to be true is actually false. ASSERT() provides a way for the programmer to validate the assumptions made by a piece of code.

The ASSERT() macro is defined only when the DEBUG compilation symbol is defined. When DEBUG is not defined, the ASSERT() macro has no effect.

The following example assertion tests the assumption that a particular pointer value is not NULL:

ASSERT(ptr != NULL);

If the driver has been compiled with DEBUG, and if the value of ptr is NULL at this point in execution, then the following panic message is printed to the console:

panic: assertion failed: ptr != NULL, file: driver.c, line: 56

Note - Because ASSERT(9F) uses the DEBUG compilation symbol, any conditional debugging code should also use DEBUG.

Use mutex_owned() to Validate and Document Locking Requirements

The syntax for mutex_owned(9F) is as follows:

int mutex_owned(kmutex_t *mp);

A significant portion of driver development involves properly handling multiple threads. Comments should always be used when a mutex is acquired. Comments can be even more useful when an apparently necessary mutex is not acquired. To determine whether a mutex is held by a thread, use mutex_owned() within ASSERT(9F):

void helper(void)
    /* this routine should always be called with xsp's mutex held */
    /* ... */

Note - mutex_owned() is only valid within ASSERT() macros. You should use mutex_owned() to control the behavior of a driver.

Use Conditional Compilation to Toggle Costly Debugging Features

You can insert code for debugging into a driver through conditional compiles by using a preprocessor symbol such as DEBUG or by using a global variable. With conditional compilation, unnecessary code can be removed in the production driver. Use a variable to set the amount of debugging output at runtime. The output can be specified by setting a debugging level at runtime with an ioctl or through a debugger. Commonly, these two methods are combined.

The following example relies on the compiler to remove unreachable code, in this case, the code following the always-false test of zero. The example also provides a local variable that can be set in /etc/system or patched by a debugger.

#ifdef DEBUG
/* comments on values of xxdebug and what they do */
static int xxdebug;
#define dcmn_err if (xxdebug) cmn_err
#define dcmn_err if (0) cmn_err
/* ... */
    dcmn_err(CE_NOTE, "Error!\n");

This method handles the fact that cmn_err(9F) has a variable number of arguments. Another method relies on the fact that the macro has one argument, a parenthesized argument list for cmn_err(9F). The macro removes this argument. This macro also removes the reliance on the optimizer by expanding the macro to nothing if DEBUG is not defined.

#ifdef DEBUG
/* comments on values of xxdebug and what they do */
static int xxdebug;
#define dcmn_err(X) if (xxdebug) cmn_err X
#define dcmn_err(X) /* nothing */
/* ... */
/* Note:double parentheses are required when using dcmn_err. */
    dcmn_err((CE_NOTE, "Error!"));

You can extend this technique in many ways. One way is to specify different messages from cmn_err(9F), depending on the value of xxdebug. However, in such a case, you must be careful not to obscure the code with too much debugging information.

Another common scheme is to write an xxlog() function, which uses vsprintf(9F) or vcmn_err(9F) to handle variable argument lists.