JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
Oracle Solaris Administration: IP Services     Oracle Solaris 10 1/13 Information Library
search filter icon
search icon

Document Information


Part I Introducing System Administration: IP Services

1.  Oracle Solaris TCP/IP Protocol Suite (Overview)

Part II TCP/IP Administration

2.  Planning Your TCP/IP Network (Tasks)

3.  Introducing IPv6 (Overview)

4.  Planning an IPv6 Network (Tasks)

5.  Configuring TCP/IP Network Services and IPv4 Addressing (Tasks)

6.  Administering Network Interfaces (Tasks)

7.  Configuring an IPv6 Network (Tasks)

8.  Administering a TCP/IP Network (Tasks)

9.  Troubleshooting Network Problems (Tasks)

What's New in Troubleshooting Network Problems

General Network Troubleshooting Tips

Running Basic Diagnostic Checks

How to Perform Basic Network Software Checking

Common Problems When Deploying IPv6

IPv4 Router Cannot Be Upgraded to IPv6

Problems After Upgrading Services to IPv6

Current ISP Does Not Support IPv6

Security Issues When Tunneling to a 6to4 Relay Router

10.  TCP/IP and IPv4 in Depth (Reference)

11.  IPv6 in Depth (Reference)


12.  About DHCP (Overview)

13.  Planning for DHCP Service (Tasks)

14.  Configuring the DHCP Service (Tasks)

15.  Administering DHCP (Tasks)

16.  Configuring and Administering the DHCP Client

17.  Troubleshooting DHCP (Reference)

18.  DHCP Commands and Files (Reference)

Part IV IP Security

19.  IP Security Architecture (Overview)

20.  Configuring IPsec (Tasks)

21.  IP Security Architecture (Reference)

22.  Internet Key Exchange (Overview)

23.  Configuring IKE (Tasks)

24.  Internet Key Exchange (Reference)

25.  IP Filter in Oracle Solaris (Overview)

26.  IP Filter (Tasks)


27.  Introducing IPMP (Overview)

28.  Administering IPMP (Tasks)

Part VI IP Quality of Service (IPQoS)

29.  Introducing IPQoS (Overview)

30.  Planning for an IPQoS-Enabled Network (Tasks)

31.  Creating the IPQoS Configuration File (Tasks)

32.  Starting and Maintaining IPQoS (Tasks)

33.  Using Flow Accounting and Statistics Gathering (Tasks)

34.  IPQoS in Detail (Reference)



General Network Troubleshooting Tips

One of the first signs of trouble on a network is a loss of communications by one or more hosts. If a host does not to come up at all the first time that the host is added to the network, the problem might be in one of the configuration files. The problem might also be a faulty network interface card. If a single host suddenly develops a problem, the network interface might be the cause. If the hosts on a network can communicate with each other but not with other networks, the problem could lie with the router. Or, the problem could be in another network.

You can use the ifconfig command to obtain information on network interfaces. Use the netstat command to display routing tables and protocol statistics. Third-party network diagnostic programs provide a number of troubleshooting tools. Refer to third-party documentation for information.

Less obvious are the causes of problems that degrade performance on the network. For example, you can use tools such as ping to quantify problems such as the loss of packets by a host.

Running Basic Diagnostic Checks

If the network has problems, you can run a series of software checks to diagnose and fix basic, software-related problems.

How to Perform Basic Network Software Checking

  1. On the local system, assume the Network Management role or become superuser.

    Roles contain authorizations and privileged commands. For more information about roles, see Configuring RBAC (Task Map) in System Administration Guide: Security Services.

  2. Use the netstat command to display network information.

    For syntax and information about the netstat command, refer to Monitoring Network Status With the netstat Command and the netstat(1M) man page.

  3. Check the hosts database (and, in Solaris 10 11/06 and previous releases, theipnodes database, if you are using IPv6) to ensure that the entries are correct and current.

    For information about the /etc/inet/hosts database, refer to hosts Database and the hosts(4) man page. For information about the /etc/inet/ipnodes database, refer to ipnodes Database and the ipnodes(4) man page.

  4. If you are running the Reverse Address Resolution Protocol (RARP), check the Ethernet addresses in the ethers database to ensure that the entries are correct and current.
  5. Try to connect to the local host by using the telnet command.

    For syntax and information about telnet, refer to the telnet(1) man page.

  6. Ensure that the network daemon inetd is running.

    # ps -ef | grep inetd

    The following output verifies that the inetd daemon is running:

    root 57 1 0 Apr 04 ? 3:19 /usr/sbin/inetd -s
  7. If IPv6 is enabled on your network, verify that the IPv6 daemon in.ndpd is running:
    # ps -ef | grep in.ndpd

    The following output verifies that the in.ndpd daemon is running:

    root 123  1 0  Oct 27 ?  0:03 /usr/lib/inet/in.ndpd