Skip Navigation Links | |
Exit Print View | |
Oracle Solaris SAN Configuration and Multipathing Guide Oracle Solaris 10 1/13 Information Library |
1. Solaris I/0 Multipathing Overview
2. Configuring Solaris I/O Multipathing Features
3. Configuring Fabric-Connected Devices
Oracle Solaris iSCSI Technology (Overview)
Identifying Solaris iSCSI Software and Hardware Requirements
Oracle Solaris iSCSI Terminology
Recommended iSCSI Configuration Practices
Configuring Solaris iSCSI Initiators
Configuring Dynamic or Static Target Discovery
How to Configure an iSCSI Initiator and Target Discovery
How to Access iSCSI Disks Upon Reboot
How to Remove Discovered iSCSI Targets
Configuring Authentication in Your iSCSI-Based Storage Network
How to Configure CHAP Authentication for Your iSCSI Initiator
How to Configure CHAP Authentication for Your iSCSI Target
Using a Third-Party RADIUS Server to Simplify CHAP Management in Your iSCSI Configuration
Oracle Solaris iSCSI and RADIUS Server Error Messages
Setting Up Solaris iSCSI Multipathed Devices
How to Enable Multiple iSCSI Sessions for a Target
Monitoring Your iSCSI Configuration
Modifying iSCSI Initiator and Target Parameters
How to Modify iSCSI Initiator and Target Parameters
Troubleshooting iSCSI Configuration Problems
No Connections to the iSCSI Target From the Local System
How to Troubleshoot iSCSI Connection Problems
iSCSI Device or Disk Is Not Available on the Local System
How to Troubleshoot iSCSI Device or Disk Unavailability
Use LUN Masking When Using the iSNS Discovery Method
6. Configuring IPFC SAN Devices
7. Booting the Oracle Solaris OS From Fibre Channel Devices on x86 Based Systems
8. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
This chapter describes how to configure iSCSI initiators in the Oracle Solaris release. For information about the procedures associated with configuring iSCSI initiators, see Configuring Solaris iSCSI Initiators.
The following topics are covered:
For information about configuring iSCSI targets, see Chapter 12, Configuring Oracle Solaris iSCSI Targets (Tasks), in System Administration Guide: Devices and File Systems.
For troubleshooting Solaris iSCSI configuration problems, see Troubleshooting iSCSI Configuration Problems.