TMADMIN Messages 1300-1399
1300
ERROR: can't become a client - tpinit() failed - string
Description
Execution of tmadmin
failed because the user could not join the application. The printed string indicates the reason for the failure. This message can be printed either because no more clients can join the application or because the user failed security permissions.
Action
If the reason is that no more clients can join the application, re-try the operation a later time. The system should be configured to allow for more clients.
If a security problem occurs, the command must be run by the BEA Tuxedo administrator.
See Also
tmadmin
(1)
1301
ERROR: Foreign host already booted, hosterrno=sub
Description
A command to boot a foreign host with foreign services was executed when the host was already booted.
Action
This operation cannot be done from tmadmin
, thus it cannot occur.
See Also
tmadmin
(1)
1302
ERROR: Foreign host already shutdown, hosterrno=sub
Description
A command to shut down a foreign host with foreign services was executed when the host was already shut down.
Action
This operation cannot be done from tmadmin
, thus it cannot occur.
See Also
tmadmin
(1)
1315
ERROR: Memory allocation failure, tperrno = error_info
Description
An attempt dynamically to allocate memory from the operating system failed while executing changetrance
or chtr
. Additional information about the problem is printed as part of the message.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1316
ERROR: Can't change trace configuration on machine lmid
Description
A failure occurred while trying to change the tracing configuration on the specified machine.
Action
Check the event log for related messages.
See Also
tmadmin
(1)
1318
ERROR: Can't change trace configuration of server name in group groupname
Description
A failure occurred while trying to change the tracing configuration on the specified server and group.
Action
Check the event log for related messages.
See Also
tmadmin
(1)
1320
ERROR: Update of trace configuration to R4.2 machine not supported
Description
The chtr
or changetrace
command was executed for a machine that is running a release earlier than 5.0. This feature was not supported on those releases.
Action
No action required.
See Also
tmadmin
(1)
1321
ERROR: Invalid trace specification
Description
The trace specified for the chtr
or changetrace
command was not valid syntax.
Action
Correct the syntax and re-run the command.
See Also
tmadmin
(1)
1322
ERROR: Trace specification too long
Description
The trace specified for the chtr
or changetrace
command was greater than 78 characters in length.
Action
Change the trace specification and re-run the command.
See Also
tmadmin
(1)
1323
ERROR: Update of trace configuration for server name in group groupname on R4.2 machine not supported
Description
The chtr
or changetrace
command was executed for a server on a machine that is running a release earlier than 5.0. This feature was not supported on those releases.
Action
No action required.
See Also
tmadmin
(1)
1324
ERROR: Can't change trace configuration of server name in group groupname
Description
A failure occurred while trying to change the tracing configuration on the specified server and group.
Action
Check the event log for related messages.
See Also
tmadmin
(1)
1326
ERROR: You must print the transaction table (printtrans) before aborting it
Description
The aborttrans
or at
command was executed before executing printtrans
. The information from printtrans
is needed to specify an index of the entry to be aborted.
Action
Execute the printtrans
command and then the aborttrans
command.
See Also
tmadmin
(1)
1327
ERROR: You must print the transaction table (printtrans) before committing it
Description
The committrans
or ct
command was executed before executing printtrans
. The information from printtrans
is needed to specify an index of the entry to be committed.
Action
Execute the printtrans
command and then the committrans
command.
See Also
tmadmin
(1)
1330
INFO: Command: string
Description
All commands that are not read-only or boot (or quit) are written to the event log as a trace of administrative actions that are done.
Action
No action required.
See Also
tmadmin
(1)
1331
ERROR: Could not send message to tlisten
Description
While trying to execute crlog
to create a transaction log on a remote machine, tmadmin
was unable to contact the tlisten
on the remote machine.
Action
Check that tlisten
is running on the remote machine. Check the event log for related messages.
See Also
tlisten
(1), tmadmin
(1)
1332
ERROR: Could not send message to tlisten
Description
While trying to execute dslg
to destroy the transaction log on a remote machine, tmadmin
was unable to contact the tlisten
on the remote machine.
Action
Check that tlisten
is running on the remote machine. Check the event log for related messages.
See Also
tlisten
(1), tmadmin
(1)
1333
ERROR: Could not send message to tlisten
Description
While trying to execute inlog
to re-initialize the transaction log on a remote machine, tmadmin
was unable to contact the tlisten
on the remote machine.
Action
Check that tlisten
is running on the remote machine. Check the event log for related messages.
See Also
tlisten
(1), tmadmin
(1)
1341
ERROR: Size of Shared Memory file is too large for the existing SHMID
Description
An attempt to load a file into shared memory via loadmem
failed because the size of the file was too large for the existing shared memory ID.
Action
Re-create (if possible) the file that is being loaded with the correct size.
1344
ERROR: Invalid IPCKEY. IPCKEY must be between 32768 and 262143.
Description
The IPCKEY
that was used was not in the valid range of keys. Valid keys are between 32768 and 262143.
Action
Enter a new IPCKEY
within the valid range.
1345
ERROR: Invalid filename for load memory function.
Description
The filename that was used was not valid.
Action
Check that the file specified is valid (e.g., that the directory and file specified exists and has read permission). Check for limited resources (out of files or disk space).
See Also
tmadmin
(1)
1348
ERROR: Could not send message to tlisten
Description
While trying to execute stoptlisten
to stop tlisten
on a remote machine, tmadmin
was unable to contact the tlisten
on the remote machine.
Action
Check that tlisten
is running on the remote machine. Check the event log for related messages.
See Also
tlisten
(1), tmadmin
(1)
1349
ERROR: Failed to stop tlisten
Description
While trying to execute stoptlisten
to stop tlisten
on a remote machine, a failure occurred.
Action
Check the event log for related messages.
See Also
tlisten
(1), tmadmin
(1)
1357
ERROR: Interface name is not set.
Description
The tmadmin
command interfaceparms
was executed without the required interface name parameter specified.
Action
Retry the command with a valid interface name.
See Also
tmadmin
(1)