Navigate BIOS Setup Utility Menus

1. Access the BIOS Setup utility.

   See Access the BIOS Setup Utility.

2. Use the left and right arrow keys to select the different primary menu options.

   As you select each menu option, the top-level window for that menu option appears.

   If you are using a serial device, see BIOS Key Mappings.

3. To select an option on a top-level window, use the up and down arrow keys to navigate the options presented.

   Only options that can be modified are highlighted when you press the up and down arrow keys.

   • As you select the option, user instructions for modifying the option appear in the right column of the window.
   • If a field is a link to a subwindow, a description of the submenu content appears in the right column.
4. Modify the setup field by pressing the + or - keys (plus or minus keys) or by pressing Enter and selecting the desired option from the pop-up menus.
5. Press the Esc key to return from a submenu to the previous menu window.

   Pressing Esc from a top-level menu is equivalent to selecting the Discard Changes and Exit option from the Save & Exit menu.

6. Modify parameters as needed.
7. Exit the BIOS Setup utility.

   See Exit the BIOS Setup Utility.

   ---

   Note - After modifying any BIOS settings and selecting Save Changes and Reset from the Save & Exit menu, the subsequent reboot might take longer than a typical reboot where no settings were modified. The additional delay is required to ensure that changes to the BIOS settings are synchronized with Oracle ILOM.

   ---

Related Information

• BIOS Key Mappings

• BIOS Setup Utility Menus

• Access the BIOS Setup Utility

• Exit the BIOS Setup Utility