Install HBA Drivers (Windows)

During the Windows OS installation, perform these steps to ensure that the drivers for your HBA are installed.

1. In the Installation Type window, click Custom (Advanced).

   The Where Do You Want to Install Windows window appears.

   
   
2. Perform one of these tasks:

   • If you do not see any storage targets listed, and a Sun Storage SAS PCIe RAID HBA option is configured on your server, click Load Driver, then proceed to Step 3.

   • If you see the storage target where you want to install the OS but want to change the default partition settings associated with that target, select the target, click Drive Options (advanced), then proceed to Step 4.

3. In the Load Drive dialog box, perform these steps:
   
   1. Ensure that the drivers are accessible according to the installation method chosen.

      See Selecting the Boot Media.

      For example:

      • Drivers are on a disk mounted as a device from the Oracle ILOM Remote Console.
      • Storage drivers are on a local physical storage media such as the OSA USB drive (if installed), which is mounted internally in the server's chassis, a CD/DVD, or virtual media mounted from the Oracle ILOM Remote Console.
   2. In the Load Driver dialog box, click Browse to navigate to the appropriate driver media folder on the OSA USB drive.
      

      Supported HBA Option Number Folder Driver Required During Installation SG-SAS6-R-INT-Z or SG-SAS6-R-EXT-Z windows/w2k8/drivers/LSI-HBA-MegaSAS2 LSI MegaRAID SAS 92xx-xx SG-SAS6-INT-Z or SG-SAS6-EXT-Z windows/w2k8/drivers/LSI-HBA-MPT2 LSI Adapter SAS 2008 Falcon

   3. In the Browse for Folder dialog box, select the appropriate driver, then click OK to load the driver.

      The selected driver appears in the Select the Driver to Be Installed window.

      For example:

      
      
   4. In the Select the Driver to Be Installed window, click Next to install the driver.

      The Where Do You Want to Install Windows window appears.

      
      

      ---

      Note - If you previously removed or unmounted the Windows OS installation media to load the drivers from the internal OSA USB drive, you might see this message: “Windows Cannot be installed to this disk.” If this message appears, insert or re-mount the Windows installation media, then click Refresh.

      ---

   5. In the Where Do You Want to Install Windows window, perform one of these actions:
      • If any partitions exist on your target drive, allow the setup to create the appropriate partitions. Go to Step 4.
      • Select the storage target listed and click Next to install the OS, then proceed to Step 5.
4. In the lower portion of the Where Do You Want to Install Windows window, perform these steps:
   
   1. Click Delete to delete the selected storage target existing partition configuration.

      A confirmation window appears.

   2. Click OK to confirm the partition deletion.
   3. If any additional partitions exist on the target drive, repeat Step a and Step b.
   4. Click Next to install the OS to the selected storage target.

   The Windows installation program begins and will reboot the server multiple times during the installation process.

5. Change the user password when prompted.

   When the installation is complete, Windows starts and prompts you to change the user password.

6. In the User Password dialog box, click OK and set up the initial user login account.

   After the initial user account is created, the Windows OS desktop appears.

7. Perform post-installation tasks.

   See Performing Post-Installation Tasks.

Related Information

• Install an OS (Media)

• OS Installation Task Map (Windows)