Oracle® Fusion
Applications
Financials Implementation Guide 11g Release 1 (11.1.4) Part Number E20375-04 |
![]() Contents |
![]() Previous |
![]() Next |
This chapter contains the following:
Asset Category Key Flexfield: Explained
Asset Key Flexfield: Explained
Creating Calendars: Points to Consider
Prorate and Retirement Conventions: Explained
Depreciation Methods: Explained
Creating or Modifying Asset Books: Points to Consider
Oracle Fusion Assets Profile Options: Critical Choices
Asset Category Descriptive Flexfield: Explained
Oracle Fusion Assets Descriptive Flexfields: Explained
Define the Asset Category key flexfield so that you can create categories and group assets by financial information in relevant categories. Define your Asset Category flexfield segments to fit the specific needs of your organization. You must define at least one subcategory segment to allow for distinctions within a major category.
You can define up to seven segments for your Asset Category key flexfield. Since Oracle Fusion Assets only displays a limited number of characters on its forms and reports, you may want to use only two or three segments so that all of them can be displayed. Also, since you must define depreciation rules for each category flexfield combination, more segments require more setup and maintenance effort.
Warning
Plan your flexfield carefully. Once you begin entering assets using the flexfield, you cannot change it.
System controls provide information about the structure of your company.
Define system controls by identifying:
Your enterprise (company) name
The oldest date placed in service
Your flexfield structures
Your asset numbering scheme
The enterprise name establishes the name that appears on Oracle Fusion Assets reports.
The oldest date placed in service controls what dates are valid to place assets in service and on what date to begin your calendars. You can only update the oldest date placed in service before you assign any calendars to depreciation books.
Define your company's Category, Location, and Asset Key flexfields structures, which will be used to record transactions.
Configure flexfield segments to capture data that represents the values of attributes. You can define any number of segments for each flexfield, but Assets supports only one structure. The administrator must choose a structure for each key flexfield that will be used to record transactions.
The starting asset number defines the number to begin automatically numbering your assets. Note that some asset numbers may be skipped.
When you use automatic numbering, then manual numbering must be less than the starting asset number that you have established. In other words, if you start automatic numbering at 50,001, manual numbering must be between 1 and 50,000. Asset numbers with a letter in them are not reserved for automatic asset numbering, since the automatic numbers are a numerical sequence.
If you are converting from another system, you can enter a starting number greater than the number of assets you want to convert so converted assets keep the same number from the previous system. For example, if you are converting 75,000 assets, you can enter 100,001 as the starting number to reserve the numbers 1 to 100,000 for manual asset numbering. Note that adding the 75,000 assets will increment the automatic numbering sequence by 75,000 (automatically numbered assets will begin at 175,001).
A fiscal year is a standard set of periods used to prepare annual financial statements for reporting and tax purposes. Normally its twelve months period, this will vary from business to business and also country to country. A fiscal year can also be referred to as a financial year or a budget year.
You need to define the start date and end date for each of your fiscal years starting from the earliest date placed in service through at least one fiscal year beyond the current fiscal year. You need to define at least one calendar for each fiscal year to break the fiscal year into multiple reportable periods, such as months.
Note
Depreciation will fail if the current fiscal year is the last fiscal year you have set up.
Consider the following when setting up your fiscal years.
You can set up multiple fiscal years and assign different fiscal years to your different corporate books to meet the various reporting and tax requirements.
The fiscal year should be the same for a corporate book and all its associated tax books. In other words, the calendar for a tax book must use the same fiscal year name as the calendar for its associated corporate book.
Use the Asset Key flexfield in Oracle Fusion Assets to group your assets by non-financial information. You design your Asset Key flexfield to record the information you want. You can assign the same asset key to many assets to easily find similar assets. All Assets transaction pages allow you to query assets using the asset key, and help you find your assets without an asset number.
Even If you choose not to track assets using the asset key, you must define at least one segment Asset Key flexfield without validation because the Asset Key flexfield structure is required to set up the system controls.
Warning
Plan your flexfield carefully. Once you begin entering assets using the flexfield, you cannot change it.
Asset categories let you define information that is common to a group of assets, such as the depreciation method and the prorate convention.
General category information includes a description of the category, and default information such as whether assets in this category are leased or owned, personal or real property, and whether they are capitalized. You can also specify if assets by default are in physical inventory or are enabled in Oracle Fusion Assets.
Asset categories also contain:
General Ledger accounts
Default depreciation rules
Tax book depreciation rules
Default subcomponent depreciation rules
Group asset depreciation rules
You assign General Ledger accounts to your category during category setup.
Assign the following General Ledger accounts when defining asset categories:
Asset Cost account: Reconcile asset costs to your general ledger. Assets creates journal entries for this account to reflect additions, retirements, cost changes, transfers, reclassifications, and capitalizations.
Asset Clearing account: Reconcile your payables system and Assets for manual asset additions and cost adjustments. For mass additions, Assets uses the complete account combination that comes over with a mass addition line to reconcile the asset addition or cost adjustment with your payables system.
Depreciation Expense account: Charge depreciation for assets in this category and book to this account.
Accumulated Depreciation account: Use this account as the contra account for the asset cost account for this category.
Bonus Expense account: Use this account if you have set up bonus rates. If you do not enter a value in the bonus expense account, it defaults to the depreciation expense account.
Bonus Reserve account: Use this account to post bonus reserves. If you do not enter a value for the bonus reserve account, it defaults to the accumulated depreciation account.
CIP Cost account: Reconcile construction-in-process (CIP) asset costs to your general ledger.
CIP Clearing account: Use this account if you entered a CIP cost account.
Unplanned Depreciation Expense account: Charge unplanned depreciation for assets in this category and book to this account.
Set up default depreciation rules for each category in each book. The default depreciation rules that you set up for a category also depend upon the date placed in service ranges you specify. Oracle Fusion Assets defaults the depreciation rules when you add an asset, to help you add assets quickly. If the default does not apply, you can override many of the defaults for an individual asset.
Set up the following default depreciation rules when defining asset categories:
Placed in service range: When you add an asset, the depreciation rules default according to the date placed in service of the asset, the category, and the book. You can specify as many ranges of default depreciation rules as you need. If you leave the end date blank, Assets uses that set of depreciation rules indefinitely.
Depreciate: The Depreciate check box specifies whether assets are normally depreciated in this book and category.
Note
Expensed assets are not depreciated, even if the Depreciate check box is checked.
Method: Specifies the default depreciation method for assets in this book and category:
If you enter a life-based method, you must enter the asset life in years and months. The table-based method you enter must have the same number of periods as the prorate calendar for this book.
If you enter a flat-rate method, you must enter default values for the basic rate and adjusted rate that you normally use to depreciate assets in this book and category. If you are defining this category for a tax book, you also can enter a bonus rule.
Depreciation limit type: Specifies whether to depreciate an asset beyond the recoverable cost in the years following the useful life of the asset.
Bonus rule: Specifies the default bonus rule for assets in this book and category. You can use bonus rules for corporate books and tax books, using all depreciation methods.
Prorate convention and retirement convention: Specifies the default prorate and retirement conventions assigned to assets in this book and category.
Default salvage value: Specifies a default salvage value percentage for this category, book, and range of dates placed in service. This rule is valid only if you chose to use the default percentage from the salvage value for this book.
For example, if you want the salvage value to default to 10 percent of the cost, enter 10. When you perform transactions affecting asset cost, Assets uses this default percentage to calculate the salvage value according to the following formula:
Salvage Value = Cost * Default Percentage
For tax books, optionally enter either a depreciation expense or cost ceiling.
Depreciation ceiling: Specifies the depreciation expense limit to be used for assets in this tax book and category.
Capital gains threshold: Specifies the minimum time you must hold an asset for Assets to report it as a capital gain when you retire it.
Mass property eligible: Specifies whether assets added to this category are eligible to be mass property assets. A mass property asset contains multiple assets with the same category, book, and fiscal year combination.
The following depreciation rules are specific only to tax books:
Straight line for retirements: Specifies that a straight-line depreciation method is used to determine the gain or loss resulting from the retirement of 1250 (real) property.
Method: Specifies the default depreciation method for assets in tax books.
Life: Specifies the default number of years and months for assets in tax books.
The following depreciation rules are specific only to assets that are subcomponent assets of parent assets:
Rule: Specifies the default life of the subcomponent asset based on the life of the parent asset.
None (leave field blank): There is no connection between the life of the subcomponent asset and the parent asset. Assets defaults the subcomponent asset life from the asset category.
Same end date (no minimum life specified): The subcomponent asset becomes fully depreciated on the same day as the parent asset or at the end of the category default life, whichever is sooner. The default subcomponent asset life is based on the end of the parent asset life and the category default life. If the parent asset is fully reserved, Assets gives the subcomponent asset a default life of one month.
Same end date (minimum life specified): The subcomponent asset becomes fully depreciated on the same day as the parent asset, unless the parent asset life is shorter than the minimum life you specify. The subcomponent asset's life is determined based on the end of the parent asset's life, the category default life, and the minimum life. If the parent asset's remaining life and the category default life are both less than the minimum life you enter, Assets uses the minimum life for the subcomponent asset. Otherwise, it uses the lesser of the parent asset's remaining life and the category default life.
Same life: The subcomponent asset uses the same life as the parent asset. It depreciates for the same total number of periods. If the subcomponent asset is acquired after the parent asset, it depreciates beyond the end date of the parent asset life.
Minimum life (years and months): Specifies the minimum life of subcomponent asset when you choose same end date for the subcomponent life rule. If the parent asset's remaining life and the category default life are both less than the minimum life you enter, Assets uses the minimum life for the subcomponent asset. Otherwise, it uses the lesser of the parent asset's remaining life and the category default life.
The following depreciation rules are specific only to group assets and their member assets:
Recognize gain or loss: Specifies that gain and loss is not recognized at the time of the retirement. This option applies only to member assets that are members of a group asset.
Terminal gain or loss: Specifies whether to recognize terminal gain and loss immediately, at the end of the year, or not at all. Terminal gain or loss occurs when the last member asset in a group asset is retired and no additional assets will be added to the group asset. The remaining accumulate depreciation balance in the group asset is the terminal gain or loss amount.
Recapture excess reserve: Specifies whether the excess group asset accumulated depreciation should be recaptured and recognized as a gain.
Limit net proceeds to cost: Specifies that the amount of proceeds that may be added to accumulated depreciation is limited to the recoverable cost of the retiring member asset. This rule is available only if you specified that gain and loss is not recognized.
Tracking Method
Allocate group amount: Specifies whether to allocate the calculated group depreciation amount to its member assets. The allocation is based on the depreciable basis of the member assets.
Calculate member asset amount: Specifies if depreciation is calculated at the member asset level.
Group asset: Specifies the group asset to which all assets added to this category will be assigned. If you enter a group asset number in this field, all capitalized and construction-in-process (CIP) assets using this category will be automatically assigned to the group asset entered.
Oracle Fusion Assets uses the Location flexfield to group and track your assets by physical location. Define the Location flexfield structure to fit the specific needs of your organization. Choose the number of segments, the length of each segment, the name, and the order of each segment in your Location flexfield. You must define a state segment and up to six other location segments.
For example, if you do business internationally (or plan to do so in the future), you may want to track the country an asset is in. You may also want to include segments for state, city, and site. If you track asset locations in more detail, for example, if you use barcodes, you can also add segments for the building and room number.
The location name (all segments concatenated) appears on forms and reports, which display only a limited number of characters. You may want to abbreviate some location segment values.
Warning
Plan your flexfield carefully. Once you begin entering assets using the flexfield, you cannot change it.
Calendars break down your fiscal year into accounting periods. Define your calendars with as many periods as necessary for your reporting and tax regulation requirements. Each book you set up requires a depreciation calendar and a prorate calendar. You can use one calendar for multiple depreciation books and as both the depreciation and prorate calendar for a book.
Corporate books can share the same calendar. A tax book can have a different calendar than its associated corporate book. The calendar for a tax book must use the same fiscal year name as the calendar for the associated tax book.
Important
You must initially set up all calendar periods from the period corresponding to the oldest date placed in service to the last day of the current fiscal year. You must set up at least one period before the current period. At the end of each fiscal year, Oracle Fusion Assets automatically sets up the periods for the next fiscal year.
Define calendars according to your needs. For example, to define a 4-4-5 calendar, set up your fiscal years, depreciation calendar, and prorate calendar with different start and end dates, and fill in the uneven periods. You can divide annual depreciation proportionately according to the number of days in each period or evenly in each period.
Before you can set up a calendar, you must have completed setting up the following:
System controls
Fiscal years
The depreciation calendar determines the number of accounting periods in your fiscal year.
Important
If you assign the depreciation calendar to a book from which you create journal entries and transfer it to your general ledger, you must set up your depreciation calendar with the same period names you set up in your general ledger.
The prorate calendar determines what rate Assets uses to calculate annual depreciation by mapping each date to a prorate period, which corresponds to a set of rates in the rate table.
The Depreciation process uses the prorate calendar to determine the prorate period that is used to choose the depreciation rate.
Oracle Fusion Assets uses prorate and retirement conventions to determine how much depreciation to take in the first and last year of an asset's life.
To determine depreciation, set up:
Prorate conventions
Retirement conventions
Define prorate conventions to determine depreciation in the first and last year of an asset's life, based on when you place the asset in service. Since assets can be acquired at any time in a given period, prorate conventions must account for every date in the fiscal year for assets to depreciate properly. The prorate convention and the date placed in service determine the prorate date. Assets uses the prorate date to determine the prorate period in your prorate calendar.
Important
You must initially set up all your prorate conventions from the convention period corresponding to the oldest date placed in service through the end of the current fiscal year. At the end of each fiscal year, Assets automatically sets up your prorate conventions for the next fiscal year.
Assets prorates the depreciation taken for an asset in its first fiscal year of life according to the prorate date. For example, if you use the half-year prorate convention, the prorate date of all assets using that convention is simply the midpoint of your fiscal year. So assets acquired in the same fiscal year take the same amount (half a year's worth) of depreciation in the first year. If however, you use the following month prorate convention, the prorate date is the beginning of the month following the month placed in service, so the amount of depreciation taken for assets acquired in the same fiscal year varies according to the month they were placed in service.
Your reporting authority's depreciation regulations determine the amount of depreciation to take in the asset's first year of life. For example, some governments require that you prorate depreciation according to the number of months you hold an asset in its first fiscal year of life. In this case, your prorate convention has twelve rate periods, one for each month of the year. Other reporting authorities require that you prorate depreciation according to the number of days that you hold an asset in its first year of life. This means that the fiscal year depreciation amount would vary depending on the day you added the asset. Thus, your prorate convention contains 365 prorate periods, one for each day of the year.
If you do business in a country that requires you to use a different prorate convention for retirements than for additions, set up retirement conventions to determine how much depreciation to take in the last year of life, based on the retirement date.
If you retire the asset before it is fully reserved, then Assets uses the prorate date from the retirement convention to determine how much depreciation to take in the asset's last year of life.
Depreciation methods specify how to allocate the asset cost. Use Oracle Fusion Assets predefined depreciation methods or define additional depreciation methods to accommodate your financial and accounting needs.
Consider the following when using or customizing depreciation methods.
Assets provides the following predefined depreciation methods:
Straight-Line
150 Declining Balance with Straight-Line Switch
200 Declining Balance with Straight-Line Switch
ACRS: Low-Income Foreign
ACRS: Personal Foreign
ACRS: Real Foreign Mid-Month Convention
ACRS: Low-Income
ACRS: Low-Income Mid-Month Convention
ACRS: Personal Straight-Line
ACRS: Real
ACRS: Real Mid-Month Convention
ACRS: Real Straight-Line
ACRS: Real Straight-Line Mid-Month Convention
Alternative Minimum Tax: Half-Year Convention
Alternative Minimum Tax: Mid-Quarter Convention
MACRS: Half-Year Convention
MACRS: Mid-Quarter Convention
MACRS: Straight-Line Half-Year Convention
MACRS: Straight-Line Mid-Month Convention
MACRS: Straight-Line Mid-Quarter Convention
Sum of Years Digits
Your financial and accounting needs may require that you set up additional depreciation methods other than the predefined methods Assets includes. For example, once a depreciation method is in use, it cannot be modified. Therefore, any modification to existing rates within a method requires that you define a new depreciation method.
Define the following types of depreciation methods:
Calculated (straight-line): Calculates the annual depreciation rate by dividing the life (in years) into one. Calculated methods spread the asset value evenly over the life of the asset.
Table-based: Calculates the annual depreciation using the depreciation method and life to determine which rate table to use. Then, it uses the prorate period and year of life to determine which of the rates in the table to use.
Flat-rate: Calculates the annual depreciation as the depreciation rate multiplied by the recoverable cost or net book value, multiplied by the fraction of a year the asset was held.
Define formula-based depreciation methods when the existing methods are not adequate to handle your company's depreciation requirements.
Assets provides predefined variables and functions you use to create formula-based depreciation methods. Any formulas you create are saved for later use.
Important
It is essential that you plan and thoroughly test your custom depreciation formulas to ensure that your assets will depreciate correctly. Poorly thought out depreciation formulas can cause unexpected and incorrect depreciation rates.
Use bonus rules to increase the annual depreciation expense for assets in the early years of an asset's life using flat-rate, straight-line, table-based, and formula-based depreciation methods. A bonus rule can have a different bonus rate for each year of the asset's life. You can modify the rate at any time for current and future fiscal years. You can use bonus rules with corporate books as well as tax books.
You can also set up negative bonus rates to amortize bonus reserve.
Note
You cannot remove the bonus rule from an asset. You can only change the bonus rule. If the asset is not required to take additional depreciation then you need to change the bonus rule to another rule with rate of zero.
Assets provides depreciable basis rules feature to accommodate depreciation method setup requirements not met by the cost or net book value calculation basis types. The combination of the depreciable basis rule and the depreciation method determine how the depreciable basis is derived.
You can set up an unlimited number of independent asset books. Each book has its own set of depreciation rules, accounts, and calendars to organize and implement your fixed assets accounting policies more effectively. You must set up your asset books before you can add assets to them.
An asset can have different financial information and depreciation rules in each book. For example, you can make the asset cost in your tax book different from the cost in the associated corporate book. Because the books are independent, you can run depreciation for each book on a different schedule.
In Oracle Fusion Assets, user access to the data is secured at the asset book level. Each user can view and update the assets only in the asset book to which they have access.
While defining your asset books you need to select the reference data set for the following set up and lookup objects:
Bonus Rules
Depreciation Ceilings
Depreciation Methods
Descriptions
Prorate Convention
Queue Name
Retirement Type
Unplanned Type
While defining these set up and lookup objects, you need to use the same reference data set value that you assigned to the book for which these are created. While adding an asset or performing any transaction on an asset in the book, you will see only the setup object values that share the reference data set with this book.
Before you can set up an asset book, you must have completed setting up the following:
Define ledgers
Define asset accounts
Define system controls
Define fiscal years
Define calendars
Define prorate conventions
Define reference data sets
You can define the following types of asset books:
Corporate
Tax
An asset can belong to any number of tax books, but must belong to only one corporate book. New or existing assets must first be added to a corporate book and then can be easily copied to all the associated tax books.
You can set up multiple corporate books that create journal entries for different ledgers, or for the same ledger. In either case, you must run depreciation and create journal entries for each book. For each corporate book, you can set up multiple tax books and associate all of them to the corporate book.
A tax book must be associated with a corporate book so that the assets and transactions are easily copied from the corporate book. This helps to maintain multiple accounting and depreciation representations for assets with minimal effort.
Tax books can have different calendars than their associated corporate books, as long as both calendars uses the same fiscal year. You can use the tax rules to control what transactions need to be copied from the corporate book to the tax book.
You can associate the tax book to ledger of its corporate book or to a different ledger. You can also optionally create journal entries and transfer to your general ledger. The different ledger must be a secondary ledger of the ledger assigned to the corporate book and the following conditions must be satisfied:
Enable Oracle Fusion Subledger Accounting and set Use Primary Ledger Amounts to No in the accounting options of the secondary ledger setup.
Enable Assets for Subledger Accounting for the secondary ledger.
Note
When setting up a tax book that is linked to a secondary ledger, the chart of accounts and currency must be the same as the primary ledger that is linked to the corporate book.
Set profile options to specify how Oracle Fusion Assets controls access to and processes data, such as:
The number of requests you can run in parallel
The timing diagnostic message value
The amount of database information retained in a concurrent process
The cache reset value
The batch size used for bulk processing in mass processes
The book selected by default in Assets pages
This profile option controls the number of requests you can run in parallel for Assets processes that can run in parallel. For example, use this profile option to run parallel depreciation processes.
Profile Option Display Name |
Default Value |
Effect |
---|---|---|
Parallel Request Number |
1 |
You can enter a number between 1 and 20 to specify the maximum number of parallel requests you want to allow. If you set a value that is greater than 1, you can run multiple processes at the same time. For example, if you set the value to 5, you can run multiple Depreciation processes. |
You set whether timing diagnostic messages are printed in concurrent program log files. Support personnel can use this profile option as a tool to identify problems with the code.
Profile Option Display Name |
Default Value |
Effect of Enabling |
Effect of Disabling |
---|---|---|---|
Timing Diagnostics |
No value (No) |
Enables printing of timing information |
Disables printing of timing information |
This profile option controls the amount of database information retained in concurrent process for performance improvement.
Profile Option Display Name |
Default Value |
Effect |
---|---|---|
Cache Sizing Factor |
25 |
You can set a value from 0 to 25. The number you enter controls the amount of information that can be stored in the cache. If you enter a value of 0, only one record is retained in the cache. If you enter a value of 25, a large amount of data is retained in the cache. In general, a small cache size works better for a very simple data structure. A large cache size works well for a more complex data structure, for example, setup data that uses many depreciation methods, bonus rules, depreciation ceilings, and retirement conventions. |
This profile option controls the caching buffer used when you run the Depreciation process.
Profile Option Display Name |
Default Value |
Effect of Enabling |
Effect of Disabling |
---|---|---|---|
Depreciation Single |
No value (No) |
Cache is reset after every asset Note Set this profile to Yes only temporarily if some assets failed previously when running the Depreciation process. In this case, rerun the Depreciation process for any set of 20 assets that failed depreciation. When this profile option is set to Yes, the log file provides information on each asset so that you can determine which asset failed. When the assets have depreciated successfully, reset the profile option to No. Running depreciation with the profile option set to Yes can slow performance considerably. |
Cache is reset after every 20 assets |
This profile option sets the batch size for the Mass Transactions process.
Profile Option Display Name |
Default Value |
Effect |
---|---|---|
Batch Size |
200 |
The value indicates the number of records in a batch. For example, if you use the default value of 200, each batch contains 200 records. The value can be between 1 and 10,000. |
This profile option specifies the book that appears by default on Assets pages.
Profile Option Display Name |
Default Value |
Effect of Enabling |
Effect of Disabling |
---|---|---|---|
Default Book |
None |
The default book appears as the value in all Assets pages where the Book field appears. |
You must select a book from the menu in all Assets pages where the Book field appears. |
Set up the Asset Category descriptive flexfield to store additional information based on the asset category.
Enter the category code as the reference field to base the descriptive flexfield structure on the value of your Asset Category flexfield. You define your context field values (structure names) to exactly match your concatenated Asset Category Flexfield combinations. For example, if you have a major category value of BUILDING, and a minor category value of OFFICE, your Asset Category Flexfield combination is BUILDING.OFFICE, so you define BUILDING.OFFICE as your context value. Similarly, you can define another context value as VEHICLE.DELIVERY.
Note
The segment separator, spelling, and case must exactly match your Category Flexfield combination.
You do not need to define a descriptive flexfield structure for each combination of your Asset Category flexfield. Define structures only for those categories in which you want to capture additional information (such as the license number or insurance policy number).
Warning
Plan your flexfield carefully. Once you begin entering assets using the flexfield, you cannot change it.
Oracle Fusion Assets allows you to record and track all standard asset information on the Assets pages. However, there may be additional information you need to record for your assets that needs to be tracked for reporting purposes. You can set up descriptive flexfields to record and track additional information in Assets. You can set up a descriptive flexfield for each asset category to collect information relevant to your business. For example, you can track the license number for cars and the square footage for buildings. When you assign a new asset to a category, you can enter the additional information in a descriptive flexfield.
The following table lists the descriptive flexfields available in Assets and their corresponding Assets pages:
Descriptive Flexfield |
Associated Assets Page |
---|---|
Asset Category |
Add Asset Edit Source Line Add Assets and Prepare Source Lines spreadsheets |
Assets Invoices |
Add Asset Edit Source Line Add Source Lines Change Source Lines Source Line Retirement Add Assets and Prepare Source Lines spreadsheets |
Bonus Rates |
Create Bonus Rule Edit Bonus Rule |
Bonus Rules |
Create Bonus Rule Edit Bonus Rule |
Book Controls |
Create Book Edit Book |
Calendar Types |
Create Calendar Edit Calendar |
Categories |
Create Category Edit Category |
Category Books |
Create Category Edit Category |
Category Book Defaults |
Create Category Edit Category |
Ceilings |
Create Ceiling Edit Ceiling |
Convention Types |
Create Prorate Convention Edit Prorate Convention |
Fiscal Year |
Create Fiscal Year Edit Fiscal Year |
Flat Rates |
Create Depreciation Method Edit Depreciation Method |
Locations |
Manage Locations |
Methods |
Create Depreciation Method Edit Depreciation Method |
Retirements |
Cost Retirement Unit Retirement Source Line Retirement |
System Controls |
Manage System Controls |
Transactions |
Add Asset Edit Source Line Preview Add to Asset Change Financial Details Suspend Depreciation Add Source Lines Change Source Lines Transfer Source Lines Change Category Perform Unplanned Depreciation Transfer Reserve Change Group Asset Cost Retirement Source Line Retirement Unit Retirement Transfer Asset Adjust Units Add Assets and Prepare Source Lines spreadsheets |