A script enabled browser is required for this page to function properly.
Skip to main content
STA Reference Guide, v1.0.2
E28382-03
Table of Contents Previous Next Index


Libraries Overview Screen : Library Attribute Definitions : Library

Library

Details about the library. These attributes come directly from the library and are updated with each library configuration data collection.

Attribute

Definition

Library Complex Name

Name assigned to the complex by STA.

For SL150, SL500, and SL3000 libraries, this value is formatted as library_model_library_serial_number. Examples: SL150_262960B+1234BA0018, SL500_522000001839, SL3000_571000020075
For SL8500 libraries, this value is formatted as library_model_complex_ID. Examples: SL8500_1, SL8500_4

This field links to the Libraries – Complexes Overview screen, detail view, which displays all available details about this complex. See “Library Complexes Screen”.

Library Name

User-assigned name for the library. Assigned in the Settings – SNMP Connections screen.

Library Number

Unique ID assigned to the library.

Library Model

Library model number. Possible values: SL150, SL500, SL3000, or SL8500.

Library Serial Number

Library frame serial number.

Note – This field links to the Libraries – Overview screen, detail view, which displays all available details for this library. See “Libraries Overview Screen”.

Library WWNN

Library World Wide Node Name.

Library Top Level Indicator

Current library health. Examples:

Library Last Booted

Date and time the library was last rebooted.

Library Firmware Updated

Date and time of last library firmware update.

Library Firmware Version

Current library firmware version.

Library IP address #1

IP address of the public port on the library. The attribute value is specified by the user or administrator when the library connection is configured. For SL150 libraries, it is the Network Port 1 port; for SL500 libraries, it is the 1B port; for SL3000 and SL8500 libraries, it is the 2B port.

Note – For SL3000 and SL8500 libraries using the Redundant Electronics feature, this should be the 2B port on the active controller card.

Library IP address #2

The attribute value is specified by the user or administrator when the library connection is configured. For and SL150 and SL500 libraries, this attribute is always blank.

For SL3000 and SL8500 libraries, this entry enables STA to maintain uninterrupted SNMP communications with the library in the event of either a Redundant Electronics switch or a Dual TCP/IP failover, and it may be any of the following:

Library Scan Completed

Date and time when the most recent successful library configuration data collection was completed.


Table of Contents Previous Next Index Link to documentation
Copyright © 2012 Oracle and/or its affiliates. All rights reserved.