Oracle WebLogic Communication Services Installation Guide 11g Release 1 (11.1.1)

11g Release 1 (11.1.1)

E13808-02

Contents

Title and Copyright Information

Preface

- Audience

- Documentation Accessibility

- Related Documents

- Conventions

1 Product and Installation Overview

- 1.1 Product Overview

- 1.1.1 New in this Release

- 1.2 Installation Prerequisites

- 1.2.1 System Requirements

- 1.2.2 Port Requirements

- 1.2.2.1 Checking if a Port is in Use

- 1.3 Order of Installation

- 1.4 Installation Topologies

- 1.4.1 All-in-One Administration Server

- 1.4.2 All-in-One Managed Server

- 1.4.3 Enterprise Deployment Topology

- 1.5 What Components are Installed

2 Creating Database Schemas

- 2.1 Install RCU

- 2.2 Create Database Schemas using RCU

3 Installing Oracle WebLogic Communication Services Base Platform

- 3.1 Installing Oracle WebLogic SIP Server

4 Install Oracle WebLogic Communication Services

- 4.1 Installing OWLCS Components

- 4.2 Logging

5 Configuring Oracle WebLogic Communication Services

- 5.1 Configuring an All-in-One Managed Server

- 5.1.1 Using Pre-configured Machine Realm

- 5.1.2 Changing Realm from example.com

- 5.1.3 Start the Administration Server

- 5.1.4 Start the Managed Server

- 5.1.5 Provisioning Test Users

- 5.1.6 Testing the Installation

- 5.1.7 Logging

- 5.2 Configuring an All-in-One Administration Server

- 5.2.1 Using Pre-configured Machine Realm

- 5.2.2 Changing Realm from example.com

- 5.2.3 Start the Administration Server

- 5.2.4 Provisioning Test Users

- 5.2.5 Testing the Installation

- 5.2.6 Logging

- 5.3 Configuring OWLCS Enterprise Deployment

- 5.3.1 Introducing Enterprise Deployment Topology

- 5.3.2 Prerequisites

- 5.3.3 Installing Oracle WebLogic Communication Services

- 5.3.3.1 Creating Database Schema using RCU

- 5.3.3.2 Installing Oracle WebLogic Communication Services Base Platform

- 5.3.3.3 Installing OWLCS Components

- 5.3.3.4 Repeating the Installation for Machine 2

- 5.3.3.5 Configuring Load Balancers

- 5.3.3.6 Starting Servers

- 5.3.3.7 Changing Realm from example.com

- 5.3.3.8 Configuring Oracle WebLogic Communication Services

- 5.3.3.9 Provisioning Test Users

- 5.3.4 Testing the Installation

- 5.3.5 Starting JConsole to Modify MBeans on UNIX

- 5.3.6 Logging

- 5.4 Uninstalling OWLCS Components

6 Post-Installation

- 6.1 Changing Realm from example.com

- 6.2 Provisioning Third-Party Call Control (TPCC) Users to Enable Third Party Call Control

7 Troubleshooting

- 7.1 Port Conflicts

- 7.2 Loss of Network Connection During Installation

- 7.3 Cleanly Uninstalling OWLCS

A Creating a Silent Installation

- A.1 Base Platform

- A.2 Services

Index

Oracle® WebLogic Communication Services

Installation Guide

11g Release 1 (11.1.1)

E13808-02

April 2011

Oracle WebLogic Communication Services Installation Guide 11g Release 1 (11.1.1)

E13808-02

Copyright © 2006, 2011, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle America, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark licensed through X/Open Company, Ltd.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Preface

This preface contains the following topics:

- Audience

- Documentation Accessibility

- Related Documents

- Conventions

Audience

This guide is intended for system administrators and developers who want to install and use Oracle WebLogic Communication Services.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/us/corporate/accessibility/index.html.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/support/contact.html or visit http://www.oracle.com/accessibility/support.html if you are hearing impaired.

Related Documents

For more information, see the following documents:

- Oracle WebLogic Communication Services Administrator's Guide

- Oracle WebLogic Communication Services Developer's Guide

- Oracle Communicator User's Guide

- Oracle Fusion Middleware 11g Release Notes

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

1 Product and Installation Overview

This chapter describes Oracle WebLogic Communication Services (OWLCS), and recommended topologies in the following sections:

- Section 1.1, "Product Overview"

- Section 1.2, "Installation Prerequisites"

- Section 1.3, "Order of Installation"

- Section 1.4, "Installation Topologies"

- Section 1.5, "What Components are Installed"

1.1 Product Overview

For information about the features and capabilities of Oracle WebLogic Communication Services, see Oracle WebLogic Communication Services Administrator's Guide.

1.1.1 New in this Release

This release of Oracle WebLogic Communication Services includes enhancements and new features. To read about new and improved features, see Oracle Technology Network.

1.2 Installation Prerequisites

This section describes prerequisites for installing OWLCS and for using specific OWLCS functionality.

1.2.1 System Requirements

To install OWLCS your system must meet the following requirements:

- Oracle RDBMS Server 11.1.0.7 or Oracle RDBMS Server 10.2.0.4.

Note:

Oracle Database 10g Express Edition (10.2.0.1) may be used, but it is not a production Oracle database, and may only be used in a development environment.

- Recommended for development purposes only: Microsoft Windows 2000 with Service Pack 3 or above, Microsoft Windows Server 2003 (32-bit) with Service Pack 1 or above, or Microsoft Windows XP Professional with Service Pack 2.

Note:

For a list of supported platforms, see Oracle WebLogic Communication Services Administrator's Guide.

- JRockit SDK 1.6

Note:

When you start Oracle Universal Installer (runInstaller or setup.exe) you can specify -jreLoc <jdk path> so that Oracle Universal Installer will not prompt you to provide a jdk. For example: setup.exe -jreLoc c:\jdk1.6.5

1.2.2 Port Requirements

OWLCS requires the use of ports for TCP and UDP communications. See Oracle WebLogic Communication Services Administrator's Guide for information on how to reconfigure port numbers following installation.

Table 1-1 lists the default ports used by OWLCS.

Table 1-1 Default Ports

Port

Port Number

SIP

5060

SIPS

5061

Admin Server HTTP

7001

Admin Server HTTPS

7002

Managed Server HTTP

8001

Managed Server HTTPS

8002

1.2.2.1 Checking if a Port is in Use

To check if a port is being used in Windows, you can run the netstat command as follows:

C:\> netstat -an | find "portnum"

Note that you need double quotes around the port number.

To check if a port is being used; (in UNIX) you can run the netstat command as follows:

netstat -a | grep portnum

1.3 Order of Installation

Installation and configuration of Oracle WebLogic Communication Services is accomplished by using the following installers and tools: Repository Creation Utility (RCU), OWLCS Base Platform Installer, OWLCS Installer, WebLogic Server (WLS) Configuration Wizard. The following chapters detail the steps you must take to install and configure these components.

1.4 Installation Topologies

Oracle WebLogic Communication Services can be installed in the following installation modes:

- All-in-One Managed Server

- All-in-One Administration Server

- Enterprise Deployment Topology

1.4.1 All-in-One Administration Server

All OWLCS components are deployed on an Administration Server within a domain on a physical machine. There are no managed servers. Configuration and management of OWLCS components is done using the same Administration Server.

All-in-One Administration Server is not meant to be a production environment, rather a test and evaluation environment. It does not include High Availability functionality.

1.4.2 All-in-One Managed Server

All OWLCS components are deployed on a Managed Server within a domain on a physical machine. An Administration Server installed on the same domain is used to configure and manage OWLCS components.

All-in-One Managed Server could be used in a production environment when high availability is not required. It does not include High Availability functionality.

1.4.3 Enterprise Deployment Topology

This is the minimal recommended HA topology for Enterprise Deployment for OWLCS. OWLCS components are separated as SIP Infrastructure, Services and Presence components. Each group of components is deployed within its own domain on two different machines.

Enterprise Deployment Topology is meant for production enterprise installations.

1.5 What Components are Installed

To learn about the components installed in each of the installation types, see Oracle WebLogic Communication Services Administrator's Guide.

2 Creating Database Schemas

This chapter details the steps required to install Repository Creation Utility (RCU) and use it to create database schemas to use with Oracle WebLogic Communication Services. Topics include:

- Section 2.1, "Install RCU"

- Section 2.2, "Create Database Schemas using RCU"

2.1 Install RCU

RCU should already be installed on your computer. You use it to create schemas for OWLCS. You can reuse an existing database schema, or you can create a new one. If you are going to reuse an existing database schema, you can go on to the following chapter Chapter 3, "Installing Oracle WebLogic Communication Services Base Platform".

2.2 Create Database Schemas using RCU

Follow these steps to create new schemas:

Note:

RCU is available only on Linux and Windows platforms. Use Linux RCU to install for UNIX supported databases and Windows RCU for supported Windows databases

Note:

You can skip this step if database schema has already been created. You can reuse the schema you've already created; ensure that you use the same schema prefix when entering database information while configuring data sources in subsequent steps. If you are skipping this step, ensure that you have created all component schemas needed by OWLCS, namely: Presence, User Messaging, Subscriber Data Service, Location Service and OWSM MDS Schema.

1. Navigate to the directory into which RCU is installed. For example:
UNIX: $rcuHome/bin/rcu

Windows: <rcuHome>\BIN

where $rcuHome is the directory in which RCU is installed.

2. Start the application:
UNIX: ./rcu

Windows: rcu.bat

The Repository Creation Utility Welcome screen appears.

3. Click Next. The Create Repository screen appears.

Figure 2-1 Create Repository screen

4. Select Create, then click Next. The Database Connection Details screen appears. For simplicity, many users use their sys name here. Enter database details in the fields provided (Database Type, Host Name, Port, Service Name, Username, Password, Role).

Figure 2-2 Database Connection Details screen

5. Click Next.The Installer checks prerequisites.

Note:

In general, users will be using database servers that are configured to use UTF-8 encoding. If you are not using a database server configured to use UTF-8 encoding, then a warning message appears informing you that your database is not using UTF-8 format by default. Click Ignore and continue with the installation.

When the prerequisite checks are complete, click OK. Click Next. The Components screen appears. Select OWLCS (all necessary [5] schemas will be selected, including UMS).

Figure 2-3 Components screen

6. Click the Create a new prefix option and choose a schema prefix (such as OWLCS).

7. Check the checkbox in front of WebLogic Communication Services. OWLCS and accompanying components are automatically selected for you (Metadata Services, Presence, SIP Infrastructure Subscriber Data Services SIP Infrastructure Location Service, and User Messaging Service). Ensure that those five components are selected before proceeding. If any of those five components are not selected, select them manually. Then, click OK when completed.

8. Click Next. The Schema Password screen appears.

Figure 2-4 Schema Passwords screen

9. Select Use same passwords for all schemas.

10. Enter your password in the field provided and confirm it.

11. Click Next. The Map Tablespaces screen appears. You click Manage Tablespaces when you want to modify existing tablespaces.

Figure 2-5 Map Tablespaces screen

12. For this installation, click Next. A Repository Creation notification will appear. Click OK. Tablespaces are created, and the progress will be displayed in a pop-up notification. When the operation is completed, click OK. The Summary screen appears.

Figure 2-6 Summary screen

13. Click Create. The schema is created. A Completion Summary screen appears.

Figure 2-7 Completion Summary screen

14. Click Close.

3 Installing Oracle WebLogic Communication Services Base Platform

This chapter describes how to install servers using the Oracle WebLogic Server installer, and contains the following section:

- Section 3.1, "Installing Oracle WebLogic SIP Server"

These installation instructions are written using UNIX syntax and assume a bash shell. You can adapt them for your shell on UNIX or use the corresponding Microsoft Windows commands and syntax when installing on Microsoft Windows.

3.1 Installing Oracle WebLogic SIP Server

Perform the following steps to install Oracle WebLogic Server and a SIP Servlet Container as an All-in-One Administration Server:

1. Give executable permission on the installer file (if needed).

2. Run one of the following commands, depending on your operating system. For example:

- On Linux: ./owlcs10310_linux32.bin

- On Windows: owlcs10310_win32.exe

The installation files are extracted and the Welcome screen appears.

3. On the Welcome screen click Next. The Choose Middleware Home Directory appears.

Note:

The Middleware Home Directory is the root directory for the OWLCS Base Platform installation. Middleware Home Directory is referred to as MW_HOME in this book. When you see MW_HOME or $MW_HOME, that means the absolute path to your Middleware Home directory.

4. In the Choose Middleware Home Directory screen, select Create a New Middleware Home.

5. Enter the absolute path to the middleware home.

6. Click Next. The Register for Security Updates screen appears.

7. In the Register for Security Updates screen you can optionally enter the following:

- An e-mail address for receiving updates on security issues (recommended).

- Select the checkbox and enter your My Oracle Support password to receive security updates through My Oracle Support. For more information, see http://www.oracle.com/support/policies.html.

8. Click Next. The Choose Install Types screen appears.

9. On the Choose Install Types screen select Typical. Click Next. The Choose Product Installation Directories screen appears.

10. Though you can change locations, Oracle Corporation recommends that you use the default locations whenever possible. Click Next.

11. If on a Windows operating system, the Choose Shortcut Location screen appears. If you so choose, select the All Users Start Menu folder and click Next. The Installation Summary screen appears.

12. On the Installation Summary screen, click Next.

13. On the Installation Complete screen click Next.
The installation is complete. Perform the procedure described in Chapter 4, "Install Oracle WebLogic Communication Services".

4 Install Oracle WebLogic Communication Services

This chapter describes the installation of Oracle WebLogic Communication Services. These procedures are performed after Oracle WebLogic Communication Services Base Platform has already been installed as described in the preceding chapters.

There are three types of installation topologies:

- All-in-One Administration Server

- All-in-One Managed Server

- Enterprise Deployment (see Oracle Fusion Middleware Enterprise Deployment Guide for Oracle WebCenter for more information and installation procedures)

This chapter contains the following topic:

- Section 4.1, "Installing OWLCS Components"

- Section 4.2, "Logging"

4.1 Installing OWLCS Components

Perform the following steps to install SIP Infrastructure and Presence components for the Administration Server:

1. Navigate to the OWLCS directory on your installation media or staged installation directory, and run one of the following commands, depending on your operating system:

- UNIX: ./owlcs/Disk1/runInstaller

- Windows: owlcs\Disk1\setup.exe

2. Enter <absolute path to middleware home>/jdk160_11 when asked to specify JRE/JDK location. This will start the Oracle Universal Installer for OWLCS.

Note:

The Java VM that you use here to run the installation process is not related to the Java VM that will be used by OWLCS at runtime. Selecting Sun JDK here does not preclude you from using JRockit at runtime.

3. On the Welcome screen click Next. The Prerequisites Checklist appears.

4. In the Prerequisites Checklist screen, verify that a check mark in the Status column appears for each of the prerequisites. If a failure notification appears, you must correct the problem (ensure that the operating system and service packs are correct, and the memory is adequate), then click Continue.

Figure 4-1 Prerequisite Checks screen

5. Click Next. The Specify Installation Location screen (Figure 4-2) appears. Enter (or select from the drop-down menu) the following:

- Oracle Middleware Home: <absolute path of Oracle Middleware home>

- Oracle Home Directory: as11gr1wlcs

Note:

The Oracle Home Directory (under your Oracle Middleware Home directory) is the location into which the OWLCS components are installed.

Figure 4-2 Specify Installation Location screen

6. Click Next. The Installation Summary screen appears.

7. On the Installation Summary screen, click Install. The Installation Complete screen appears.

8. On the Installation Complete screen, click Finish.

This will close the installer and display a dialog asking you to launch the Oracle WebLogic configuration wizard. Click Yes.

Note:

If you selected No, you can launch the configuration wizard as follows:

- On Microsoft Windows: MW_HOME\as11gr1wlcs\common\bin\config.cmd

- On UNIX: $MW_HOME/as11gr1wlcs/common/bin/config.sh

You can now configure the server using the procedure in Chapter 5, "Configuring Oracle WebLogic Communication Services".

4.2 Logging

The default log level is the base log level: Notification:1. All logs are written to a single file at the following location:

MW_HOME/user_projects/domains/base_domain/servers/<server>/logs/<servername>-diagnostic.log

For more information on logging, see Oracle WebLogic Communication Services Administrator's Guide.

5 Configuring Oracle WebLogic Communication Services

This chapter describes how to install and configure the Oracle WebLogic Communication Services in different topologies, using the Oracle WebLogic Server Configuration Wizard.

You only need to configure one of the topologies in this chapter. If you are installing OWLCS All-in-One Managed Server, then you only need to perform the actions in that section. To configure an Enterprise Deployment topology, then follow the instructions in that section.

It contains the following sections:

- Section 5.1, "Configuring an All-in-One Managed Server"

- Section 5.2, "Configuring an All-in-One Administration Server"

- Section 5.3, "Configuring OWLCS Enterprise Deployment"

- Section 5.4, "Uninstalling OWLCS Components"

5.1 Configuring an All-in-One Managed Server

After completing the installation (as described in the previous chapter) the installer will be closed and the Quickstart tool started.

Figure 5-1 OWLCS All-in-One Managed Server

Perform the following steps to configure an All-in-One Managed Server:

1. Click the Start the configuration wizard link to start the Oracle WebLogic Server Configuration Wizard. The wizard starts, and the Welcome screen appears.

2. In the Welcome screen select Create a new WebLogic domain.

3. Click Next. The Select Domain Source screen appears.

4. In the Select Domain Source screen perform the following steps:

- Select Generate a domain configured automatically to support the following products.

- Check Oracle WebLogic Communication Services - 11.1.1.0 (as11gr1wlcs1). Other required components are automatically selected components.

5. Click Next. The Configure Administrator Username and Password screen appears.

6. Make the following selections in the Configure Administrator Username and Password screen:

- Choose a User Name (such as: weblogic)

- Choose a User Password.

- Confirm User Password.

- Description (for example: This user is the default administrator)

7. Click Next. The Configure Server Start Mode and JDK screen appears.

8. In the Configure Server Start Mode and JDK screen (Figure 5-2), select the Start Mode and JVM of your choice (Production Mode and JRockit are recommended for Production deployments).

Figure 5-2 Configuring Server Start Mode and JDK

9. Click Next. The Configure JDBC Component Schema screen appears.

10. In the Configure JDBC Component Schema screen, check all component schemas, fill common database information (everything except Schema Owner).Check one datasource at a time and enter the Schema Owner. For example:

Table 5-1 Schema owners

Component Schema

schema_owner

User Messaging Service

<prefix>_orasdpm

Location Service

<prefix>_orasdpls

Subscriber Data Service

<prefix>_orasdpsds

Presence

<prefix>_orasdpxdms

OWSM MDS Schema

<prefix>_mds

11. Click Next. The Test Component Schema screen appears.

12. In the Test Component Schema screen, all data source connections are tested. Recheck if there is a failure. If there aren't any, click Next. The Configuration Summary screen appears.

13. In the Configuration Summary screen click Create.

14. Click Done.

5.1.1 Using Pre-configured Machine Realm

OWLCS is pre-configured with realm example.com. If you want to use this realm, modify the machine's hosts file, pointing example.com to the local IP to enable the server to lookup and resolve example.com. The absolute path to that file is:

UNIX: /etc/hosts

Windows: C:\WINDOWS\system32\drivers\etc\hosts

If, however, you want to use a different realm (this will be the typical situation), then you must change the realm. See Section 5.1.2, "Changing Realm from example.com" for instructions on changing the realm.

5.1.2 Changing Realm from example.com

The out-of-the-box realm (example.com) should be changed to reflect the realm and domain of your deployment. Make these modifications to the realm and domain:

- SIP Server

1. Login to the Console; for example: http://weblogic.example.com:7001/console

2. Click the SipServer link on left navigation pane.

3. In the Configuration->General tab, scroll down to Domain Aliases: and enter the realm you want to choose (for example: myrealm.com).

- Digest Authentication

1. Login to the Console; for example: http://weblogic.example.com:7001/console

2. Click Security Realms on the left navigation pane.

3. Click myRealm.

4. Click the Providers tab.

5. Click DigestIdentityAsserter.

6. Click Provider Specific tab.

7. Scroll down to DigestRealmName attribute and choose the appropriate realm (for example: myrealm.com).

- Aggregation Proxy

1. Start JConsole as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

Use $DOMAIN_HOME is the directory of your domain, (that is, $MW_HOME/user_projects/domains/base_domain)<admin server host>: The host name of the machine on which you installed the server<admin server port>: The port on which the admin server is listening

In our example, <admin server port> is 7001.

2. Click the MBeans tab.

3. Change value of the following mbean attribute for AggregationProxy mbean:
Realm = <yourcompany>

- P-Asserted Identity URI for Third-Party Call Control

1. Start JConsole, using the following parameters on Machine 1, as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

Use $DOMAIN_HOME is the directory of your domain, i.e, $MW_HOME/user_projects/domains/base_domain<admin server host>: The host name of the machine on which you installed the server<admin server port>: The port on which the admin server is listening

In our example, <admin server port> is 7001.

2. Click the MBeans tab.

3. Change value of the following mbean attribute for ThirdPartyCall mbean:
PAssertedIdentityURI=sip:tpcc.user@<your realm>

Configure Machine with the new realm:

- UNIX: /etc/hosts

- Windows: C:\WINDOWS\system32\drivers\etc\hosts

5.1.3 Start the Administration Server

To start the Administration Server:

1. Navigate to MW_HOME/user_projects/domains/base_domain/bin

2. Run this command:
UNIX: ./startWebLogic.sh

Windows: startWebLogic.cmd

5.1.4 Start the Managed Server

To start the Managed Server:

1. Open a new terminal

2. Navigate to MW_HOME/user_projects/domains/base_domain/bin

3. Run this command:
UNIX: ./startManagedWebLogic.sh wlcs_server1

Windows: startManagedWebLogic.cmd wlcs_server1

4. Enter the Administrator user name and password.

Verify that the Managed Server is running when you see the console message: <Server started in RUNNING mode>. Production Mode will require you to enter credentials when starting.

5.1.5 Provisioning Test Users

To confirm that the installation was successful, you should create a few test users to test out OWLCS using Oracle Communicator.

1. Start sash:

- On UNIX: $DOMAIN_HOME/bin/launch_sash.sh -p 8001

- On Windows: $DOMAIN_HOME/bin/launch_sash.cmd -p 8001

Note:

By default the managed server picks up port 8001. If you configured the port to be something else, use that instead.

2. Provision the user: Run the following command; replace alice with username and example.com with your realm. Enter your password.

identity add privateId=alice publicId=sip:alice@example.com role="Location Service" realm=yourcompany.com password=yourpassword

5.1.6 Testing the Installation

Perform the following procedures to test the installation:

1. Install Oracle Communicator by running the downloaded EXE file.

2. Provision a test user in OWLCS as described above (for example: sip:alice@example.com).

3. Create an Oracle Communicator account for sip:alice@example.com.

4. Login to Oracle Communicator, disregard the login pop up if it appears.

5. Click the menu button on the top left (Settings).

6. Choose Preferences.

7. Click the Network tab.

8. Check Use a proxy server, and enter the canonical host name of the load balancer in the Address field.

9. Do the same for XDMS Host. Ensure that the XDMS port is the HTTP listen port of the load balancer http pool.

10. Click OK.

11. Restart Oracle Communicator and log in.

12. Enter the username and the password (as chosen previously). If you can register and change your Presence status, the installation was successful.

You can create an account for another user similarly and add him/her as a buddy to the first user. User1 should be able to send instant messages to User2, and they should be able to see each other's presence.

5.1.7 Logging

All logs are written to a single file (per server) at the following location: MW_HOME/user_projects/domains/base_domain/servers/wlcs_server1/logs/wlcs_server1-diagnostic.log

5.2 Configuring an All-in-One Administration Server

If you clicked Yes in the last screen for installing Communication services, skip Step 1 below. If you clicked No, then complete Step 1 below.

Figure 5-3 OWLCS All-in-One Administration Server

Perform the following steps to configure an All-in-One Administration Server:

1. Click the Start the configuration wizard link to start the Oracle WebLogic Server Configuration Wizard. The wizard starts, and the Welcome screen appears.

2. In the Welcome screen select Create a new WebLogic domain.

3. Click Next. The Select Domain Source screen appears.

4. In the Select Domain Source screen select Base this domain on an existing template. Click Browse and find this template file: oracle.communications.allinoneadmin_template_11.1.1.jar

5. Click Next. The Specify Domain Name and Location screen appears.

6. Click Next. The Configure Administrator Username and Password screen appears.

7. Enter and confirm the following in the Configure Administrator Username and Password screen: admin_username and admin_password.

8. Click Next. The Configure Server Start Mode and JDK screen appears.

9. In the Configure Server Start Mode and JDK screen (Figure 5-4), select the Startup Mode and Java VM of your choice.

Figure 5-4 Configuring Server Start Mode and JDK

10. Click Next. The Configure JDBC Component Schema screen appears.

11. In the Configure JDBC Component Schema screen, check all component schemas, fill common database information (everything except Schema Owner).Check one datasource at a time and enter the Schema Owner. For example:

Table 5-2 Schema owners

Component Schema

schema_owner

User Messaging Service

<prefix>_orasdpm

Location Service

<prefix>_orasdpls

Subscriber Data Service

<prefix>_orasdpsds

Presence

<prefix>_orasdpxdms

OWSM MDS Schema

<prefix>_mds

12. Click Next. The Test Component Schema screen appears.

13. In the Test Component Schema screen, all data source connections are tested. Recheck if there is a failure. If there aren't any, click Next. The Configuration Summary screen appears.

14. In the Configuration Summary screen click Create.

15. Click Done.

5.2.1 Using Pre-configured Machine Realm

OWLCS is pre-configured with realm example.com. If you want to use this realm, modify the machine's hosts file, pointing example.com to the local IP to enable the server to lookup and resolve example.com. The absolute path to that file is:

UNIX: /etc/hosts

Windows: C:\WINDOWS\system32\drivers\etc\hosts

If, however, you want to use a different realm (this will be the typical situation), then you must change the realm. See Section 5.2.2, "Changing Realm from example.com" for instructions on changing the realm.

5.2.2 Changing Realm from example.com

The out-of-the-box realm (example.com) should be changed to reflect the realm and domain of your deployment. Make these modifications to the realm and domain:

- SIP Server

1. Login to the Console; for example: http://weblogic.example.com:7001/console

2. Click the SipServer link on left navigation pane.

3. In the Configuration->General tab, scroll down to Domain Aliases: and enter the realm you want to choose (for example: myrealm.com).

- Digest Authentication

1. Login to the Console; for example: http://weblogic.example.com:7001/console

2. Click Security Realms on the left navigation pane.

3. Click myRealm.

4. Click the Providers tab.

5. Click DigestIdentityAsserter.

6. Click Provider Specific tab.

7. Scroll down to DigestRealmName attribute and choose the appropriate realm (for example: myrealm.com).

- Aggregation Proxy

1. Start JConsole as outlined in Starting JConsole to Modify MBeans on UNIX.

Use $DOMAIN_HOME is the directory of your domain, (that is, $MW_HOME/user_projects/domains/base_domain)<admin server host>: The host name of the machine on which you installed the server<admin server port>: The port on which the admin server is listening

In our example, <admin server port> is 7001.

2. Click the MBeans tab.

3. Change value of the following mbean attribute for AggregationProxy mbean:
Realm = <yourcompany>

- P-Asserted Identity URI for Third-Party Call Control

1. Start JConsole, using the following parameters on Machine 1, as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

Use $DOMAIN_HOME is the directory of your domain, i.e, $MW_HOME/user_projects/domains/base_domain<admin server host>: The host name of the machine on which you installed the server<admin server port>: The port on which the admin server is listening

In our example, <admin server port> is 7001.

2. Click the MBeans tab.

3. Change value of the following mbean attribute for ThirdPartyCall mbean:
PAssertedIdentityURI=sip:tpcc.user@<your realm>

Configure Machine with the new realm:

- UNIX: /etc/hosts

- Windows: C:\WINDOWS\system32\drivers\etc\hosts

5.2.3 Start the Administration Server

To start the Administration Server:

1. Navigate to MW_HOME/user_projects/domains/base_domain/bin

2. Run this command:
UNIX: ./startWebLogic.sh

Windows: startWebLogic.cmd

Verify that the Administration Server is running when you see the console message: <Server started in RUNNING mode>. Production Mode will require you to enter credentials when starting.

5.2.4 Provisioning Test Users

To confirm that the installation was successful, you should create a few test users to test out OWLCS using Oracle Communicator.

1. Start sash:

- On UNIX: $DOMAIN_HOME/bin/launch_sash.sh

- On Windows: $DOMAIN_HOME/bin/launch_sash.cmd

Note:

By default the managed server picks up port 7001. If you configured the port to be something else, use that instead.

2. Provision the user: Run the following command, replace alice with username and example.com with your realm (for example: yourcompany.com). Enter your password.

identity add privateId=alice publicId=sip:alice@example.com role="Location Service" realm=yourcompany.com password=yourpassword

5.2.5 Testing the Installation

Perform the following procedures to test the installation:

1. Install Oracle Communicator by running the downloaded EXE file.

2. Provision a test user in OWLCS as described above (for example: sip:alice@example.com).

3. Create an Oracle Communicator account for sip:alice@example.com.

4. Login to Oracle Communicator, disregard the login pop up if it appears.

5. Click the menu button on the top left (Settings).

6. Choose Preferences.

7. Click the Network tab.

8. Check Use a proxy server, and enter the canonical host name of the load balancer in the Address field.

9. Do the same for XDMS Host. Ensure that the XDMS port is the HTTP listen port of the load balancer http pool.

10. Click OK.

11. Restart Oracle Communicator and log in.

12. Enter the username and the password (as chosen previously). If you can register and change your Presence status, then the installation was successful.

You can create an account for another user similarly and add him or her as a buddy to the first user. User1 should be able to send instant messages to User2, and they should be able to see each other's presence.

5.2.6 Logging

All logs are written to a single file (per server) at the following location: MW_HOME/user_projects/domains/base_domain/servers/AdminServer/logs/AdminServer-diagnostic.log

5.3 Configuring OWLCS Enterprise Deployment

This section describes how to complete the installation and configuration for the high-availability installation of OWLCS. The Enterprise Deployment topology is the OWLCS high-availability deployment solution.

5.3.1 Introducing Enterprise Deployment Topology

The Enterprise Deployment Topology supports High-Availability. In the event of a failover, load balancers can continue directing traffic to functioning (available) nodes. As shown in Figure 5-5, there are three domains within each node: wlcs_sipinfra, wlcs_services and wlcs_presence. They correspond to SIP Infrastructure, Services and Presence components respectively. State replication (that is, sharing of state information across two managed servers) is supported between the wlcs_sipinfra1 engine and wlcs_sipinfra2 replica. If one node goes down, the other can continue to serve existing and new requests because state information is replicated and saved on the other node.

Figure 5-5 Enterprise Deployment topology

5.3.2 Prerequisites

Ensure that your environment meets the following prerequisites:

- Oracle RDBMS should be installed and operational in an Oracle RAC environment. The supported versions are 11.1.0.7 and 10.2.0.4. Refer to the Oracle Clusterware Installation Guide 11g Release 1 (11.1.), Oracle Real Application Clusters: For 11g Release 1 (11.1) and Oracle Real Application Clusters Installation Guide 11g Release 1.

- Two machines are available for installing OWLCS.

- A Load Balancer capable of routing SIP and HTTP traffic.

5.3.3 Installing Oracle WebLogic Communication Services

Installing Oracle WebLogic Communication Services consists of a number of installation tasks, described in the following sections:

- Section 5.3.3.1, "Creating Database Schema using RCU"

- Section 5.3.3.2, "Installing Oracle WebLogic Communication Services Base Platform"

- Section 5.3.3.3, "Installing OWLCS Components"

- Section 5.3.3.4, "Repeating the Installation for Machine 2"

- Section 5.3.3.5, "Configuring Load Balancers"

- Section 5.3.3.6, "Starting Servers"

- Section 5.3.3.7, "Changing Realm from example.com"

- Section 5.3.3.8, "Configuring Oracle WebLogic Communication Services"

- Section 5.3.3.9, "Provisioning Test Users"

5.3.3.1 Creating Database Schema using RCU

This section describes how to create database schema using Repository Creation Utility (RCU).

Note:

The procedure in this section can be skipped if the database schema has already been created. You can reuse a schema that you have already created. Remember to use the same schema prefix when entering database information while configuring the data sources as described in the procedure.
If skipping this procedure, ensure that you have created all component schema required by OWLCS, specifically, the Presence, User Messaging, Subscriber Data Service, Location Service, and OWSM MDS schema.

Perform the following steps to create the database schema using RCU:

1. Run RCU by executing one of the following commands:

- On UNIX: <rcuHome>/bin/rcu

- On Windows: <rcuHome>\BIN\rcu.bat
This launches the installation wizard for RCU.

2. On the Welcome screen click Next.

3. In Step 1 of 7 (Create Repository), select Create and then Next.

4. On Step 2 of 7 (Database Connection Details), enter the database details and click Next.

Note:

Provide the details for any one of the RAC hosts and use the service name of the DataBase.

Note:

In general, users will be using database servers that are configured to use UTF-8 encoding. If you are not using a database server configured to use UTF-8 encoding, then a warning message appears informing you that your database is not using UTF-8 format by default. Click Ignore and continue with the installation.

5. On Step 3 of 7 (Components), perform the following steps:

- Select Create a new prefix, and choose a schema prefix (such as OWLCS).

Note:

Ensure you make note of this schema prefix; you will need to use it later in the installation.

- Check the checkbox in front of WebLogic Communication Services. OWLCS and accompanying components are automatically selected for you (Metadata Services, Presence, SIP Infrastructure Subscriber Data Services SIP Infrastructure Location Service, and User Messaging Service). Ensure that those five components are selected before proceeding. If any of those five components are not selected, select them manually. Then, click OK when completed.

6. On Step 4 of 7 (Schema Passwords), perform the following steps:

- Select Use same passwords for all schemas.

- Enter your password in the field provided and confirm it.

- Click Next.

7. On Step 5 of 7 (Map Tablespaces), perform the following steps:

- For this installation, click Next. A Repository Creation notification will appear.

- Click OK. Tablespaces will be created, and the progress will be displayed in a pop-up notification.

8. On Step 6 of 7 (Summary), click Create. The schema is created. A Completion Summary screen appears.

9. On Step 7 of 7 (Completion Summary), click Close.

5.3.3.2 Installing Oracle WebLogic Communication Services Base Platform

Oracle WebLogic Communication Services Base Platform consists of Oracle WebLogic Server and a SIP server. Perform the following steps to install Oracle WebLogic Communication Services Base Platform:

1. Run one of the following commands, for example:

- On Linux: owlcs10310_linux32.bin

- On Microsoft Windows: owlcs10310_win32.exe

This launches the installation wizard and the Welcome screen appears.

2. On the Welcome screen click Next.

3. On the Choose Middleware Home Directory screen do the following:

- Select Create a New Middleware Home.

- Enter the absolute path of Middleware Home.

Note:

he Middleware Home Directory is the root directory for the OWLCS Base Platform installation. Middleware Home Directory is referred to as MW_HOME in this book. When you see MW_HOME or $MW_HOME, that means the absolute path to your Middleware Home directory.

- Click Next.

4. On the Register for Security Updates screen, do the following:

- Enter your e-mail address and My Oracle Support Password (recommended) to receive updates on security issues. Click Next.

- Select the checkbox and enter your My Oracle Support password to receive security updates through My Oracle Support. For more information, see http://www.oracle.com/support/policies.html.

5. On the Choose Install Types screen, do the following:

- Select Typical installation.

- Click Next.

6. On the Choose Product Installation Directories screen, perform the following steps:

- Though you can change locations, Oracle Corporation recommends that you use the default locations whenever possible.

- Click Next.

7. On the Choose Shortcut Location screen (Microsoft Windows only), do the following:

- Select the All Users Start Menu folder.

- Click Next.

8. On the Installation Summary screen, click Next.

9. On the Installation Complete screen, click Next.

5.3.3.3 Installing OWLCS Components

Perform the following procedures to install Oracle WebLogic Communication Services, which includes SIP Infrastructure, Services and Presence components, for each of the domains.

1. Navigate to the OWLCS directory on your installation media or staged installation directory, and run one of the following commands, depending on your operating system:

- UNIX: owlcs/Disk1/runInstaller

- Windows: owlcs\Disk1\setup.exe

2. Enter <absolute path to middleware home>/jdk160_11 when asked to specify the JRE/JDK location.

Note:

The Java VM that you use here to run the installation process is not related to the Java VM that will be used by OWLCS at runtime. Selecting Sun JDK here does not preclude you from using JRockit at runtime.

3. On the Welcome screen click Next. The Prerequisites Checklist appears.

4. In the Prerequisites Checklist screen, verify that a check mark in the Status column appears for each of the prerequisites. If a failure notification appears, you must correct the problem (ensure that the operating system and service packs are correct, and the memory is adequate), then click Continue.

5. Click Next. The Specify Installation Location screen appears. Enter (or select from the drop-down menu) the following:

- Oracle Middleware Home: <absolute path of Oracle Middleware home>

- Oracle Home Directory: as11gr1wlcs

Note:

The Oracle Home Directory (under your Oracle Middleware Home directory) is the location into which the OWLCS components are installed.

6. Click Next. The Installation Summary screen appears.

7. On the Installation Summary screen, click Install. The Installation Complete screen appears.

8. On the Installation Complete screen, click Finish.
This will close the installer and display a dialog asking you to launch the Oracle WebLogic configuration wizard. Click Yes.

Note:

If you selected No, you can launch the configuration wizard as follows:

- On Microsoft Windows: MW_HOME\as11gr1wlcs\common\bin\config.cmd

- On UNIX: $MW_HOME/as11gr1wlcs/common/bin/config.sh

5.3.3.3.1 Installing the OWLCS SIP Infrastructure Domain

Perform the following steps in the WebLogic configuration wizard you launched to install the OWLCS SIP Infrastructure domain:

1. In the Welcome screen select Create a new WebLogic domain and click Next.

2. On the Select Domain Source screen:

- Select Base this domain on an existing template.

- Navigate to:
$MW_HOME/as11gr1wlcs1/common/templates/application and select oracle.communications.edgsipinfra_template_11.1.1.jar.

Click Open. Click Next.

3. On the Specify Domain Name and Location screen, click Next.

4. On the Configure Administrator Username and Password screen, select a username and password.

5. On the Configure Server Start Mode and JDK screen, do the following:

- Select the Start Mode and JVM of your choice (Production Mode and JRockit are recommended for Production deployments). Click Next.

6. Check Configure selected component schemas as RAC.

7. Click Next.

8. On the Configure RAC Multi Data Source Component Schema screen, do the following:

- Select all Multi Data Source Schema. Enter Service Name and Password.

- Add database hosts by clicking the Add button and fill-in the Host Name, Instance Name and Port fields.

- Unselect all Multi Data Source Schema. Check one Schema at a time and type in the Username. For example:

Multi Data Source Schema

schema_owner

Location Service

<prefix>_orasdpls

Subscriber Data Service

<prefix>_orasdpsds

OWSM MDS Schema

<prefix>_mds

Note:

The prefix here refers to the prefix you created in Section 5.3.3.1, "Creating Database Schema using RCU".

9. On the Test Component Schema screen, all data source connection are tested. Recheck if there is a failure. If not, click Next.

10. On the Select Advanced Configuration screen, select Managed Servers, Clusters and Machines and click Next.

11. On the Configure Managed Servers screen, click Next.

12. On the Configure SIP data-tier Managed Server Partitions screen, click Next.

13. On the Assign SIP data-tier Managed Server to Partitions screen, click Next.

14. On the Configure Clusters screen, click Next.

15. On the Configure Machines screen, do the following:

- Click Add twice to add two machines: new_Machine_1 and new_Machine_2.

- Set the Node manager listen address of both the machines to All Local Addresses.

- Click Next.

16. On the Assign Servers to Machines screen, do the following:

- Assign AdminServer, wlsc_sipinfra1, and wlcs_sipinfrastate1 to new_Machine_1.

- Assign wlcs_sipinfra2 and wlcs_sipinfrastate2 to new_Machine_2.

- Click Next.

17. On the Configuration Summary screen, click Create.

18. Click Done.
The configuration wizard closes.

5.3.3.3.2 Installing the OWLCS Services Domain

Perform the following steps to install the OWLCS Services domain.

1. Run the configuration wizard, as follows:

- Microsoft Windows: $MW_HOME\as11gr1wlcs1\common\bin\config.cmd

- UNIX: $MW_HOME/as11gr1wlcs1/common/bin/config.sh

2. On the Welcome screen, select Create a new WebLogic domain, and click Next.

3. On the Select Domain Source screen:

- Select Base this domain on an existing template.

- Navigate to:
$MW_HOME/as11gr1wlcs1/common/templates/application

- Select:
oracle.communications.edgservices_template_11.1.1.jar

- Click Open. Click Next.

4. On the Specify Domain Name and Location screen, click Next.

5. On the Configure Administrator Username and Password screen, select a username and password.

6. In the Configure Server Start Mode and JDK screen, select the Start Mode and JVM of your choice (Production Mode and JRockit are recommended for Production deployments).

7. In the Configure JDBC Component Schema screen, check Configure selected component schemas as RAC.

8. Click Next.

9. On the Configure RAC Multi Data Source Component Schema screen, do the following:

- Select all Multi Data Source Schema. Enter Service Name and Password.

- Add database hosts by clicking on the Add button and fill-in the Host Name, Instance Name and Port fields.

- Unselect all Multi Data Source Schema. Check one Schema at a time and type in the Username. For example:

Multi Data Source Schema

schema_owner

Location Service

<prefix>_orasdpls

Subscriber Data Service

<prefix>_orasdpsds

OWSM MDS Schema

<prefix>_mds

Note:

The prefix here refers to the prefix you created in Section 5.3.3.1, "Creating Database Schema using RCU".

10. On the Test Component Schema screen, all data source connection are tested. Recheck if there is a failure. If not, click Next.

11. On the Select Advanced Configuration screen, select Managed Servers, Clusters and Machines and click Next.

12. On the Configure Managed Servers screen, click Next.

13. On the Configure SIP data-tier Managed Server Partitions screen, click Next.

14. On the Configure Clusters screen, click Next.

15. On the Configure Machines screen, do the following:

- Click Add twice to add two machines: new_Machine_1 and new_Machine_2.

- Set the Node manager listen address of both the machines to All Local Addresses.

- Click Next.

16. On the Assign Servers to Machines screen, do the following:

- Assign AdminServer and wlcs_services1 to new_Machine_1.

- Assign wlcs_services2 to new_Machine_2.

- Click Next.

17. On the Configuration Summary screen, click Create.

18. Click Done.
The configuration wizard closes.

5.3.3.3.3 Installing the OWLCS Presence Domain

Perform the following steps to install the OWLCS Presence domain:

1. Run the configuration wizard, as follows:

- Microsoft Windows: $MW_HOME\as11gr1wlcs1\common\bin\config.cmd

- UNIX: $MW_HOME/as11gr1wlcs1/common/bin/config.sh

2. On the Welcome screen, select Create a new WebLogic domain. Click Next.

3. On the Select Domain Source screen, do the following:

- Select Base this domain on an existing template.

- Browse to the following template:
$MW_HOME/as11gr1wlcs1/common/templates/application and select oracle.communications.edgpresence_template_11.1.1.jar

Click Open. Click Next.

4. On the Specify Domain Name and Location screen click Next.

5. On the Configure Administrator Username and Password screen, select a username and password.

6. On the Configure Server Start Mode and JDK screen, select the Start Mode and JVM of your choice (Production Mode and JRockit are recommended for Production deployments). Click Next.

7. In the Configuring JDBC Data Sources screen, check Configure selected component schemas as RAC.

8. Click Next.

9. On the Configure RAC Multi Data Source Component Schema screen, do the following:

- Select all Multi Data Source Schema. Enter Service Name and Password.

- Add database hosts by clicking the Add button and fill-in the Host Name, Instance Name and Port fields.

- Unselect all Multi Data Source Schema. Check one Schema at a time and type in the Username. For example:

Multi Data Source Schema

schema_owner

Location Service

<prefix>_orasdpls

Subscriber Data Service

<prefix>_orasdpsds

Presence

<prefix>_orasdpxdms

OWSM MDS Schema

<prefix>_mds

Note:

The prefix here refers to the prefix you created in Section 5.3.3.1, "Creating Database Schema using RCU".

10. On the Test Component Schema screen, all data source connection are tested. Recheck if there is a failure. If not, click Next.

11. On the Select Advanced Configuration screen, select Managed Servers, Clusters and Machines and click Next.

12. On the Configure Managed Servers screen, click Next.

13. On the Configure SIP data-tier Managed Server Partitions screen, click Next.

14. On the Configure Clusters screen, click Next.

15. On the Configure Machines screen, do the following:

- Click Add twice to add two machines: new_Machine_1 and new_Machine_2.

- Set the Node manager listen address of both the machines to All Local Addresses.

- Click Next.

16. On the Assign Servers to Machines screen, do the following:

- Assign AdminServer and wlcs_presence1 to new_Machine_1.

- Assign wlcs_presence2 to new_Machine_2.

- Click Next.

17. On the Configuration Summary screen, click Create.

18. Click Done.

5.3.3.4 Repeating the Installation for Machine 2

Repeat the following procedures for Machine 2:

- Section 5.3.3.2, "Installing Oracle WebLogic Communication Services Base Platform"

- Section 5.3.3.3, "Installing OWLCS Components"

Note:

Ensure that you use exactly the same MW_HOME path as you used for Machine 1.
For example, if your MW_HOME on Machine 1 is /home/owlcsuser/mw_home, Machine 2 should have exactly the same MW_HOME, /home/owlcsuser/mw_home.

5.3.3.5 Configuring Load Balancers

Route network traffic through a Load Balancer. Load Balancers must be capable of routing both HTTP and SIP traffic, and must be configured to do so. This section details the properties of the Virtual Hosts and Ports for proper configuration.

5.3.3.5.1 HTTP Pools

Configure two HTTP Pools. They are configured at the Load Balancer and route to ports 8001 and 8011 on the two Communication Server machines. The former is the location of the SIPInfra Containers. The latter is the location of the Services container used by external client applications such as Oracle WebCenter.

5.3.3.5.2 Main SIP Pools

The Main SIP pool is used by SIP clients on the external network, including Oracle Communicator. This SIP pool must support both TCP and UDP.

5.3.3.5.3 Presence SIP Pools

Presence SIP Pools are the SIP pools used for accessing the Presence Server. These must support both UDP and TCP and need only be available internally.

5.3.3.5.4 Configuring Virtual Servers on the Load Balancer

Configure the Load Balancer with Virtual Servers to support the pools listed above. Recommended settings are shown in Table 5-3.

Table 5-3 Virtual Servers for Load Balancers

Name

Listen Port

Members

Transport

Monitor

Ext/Int

LBR_SI

80

Machine 1: 8001 Machine 2: 8001

HTTP

HTTP

External

LBR_SVC

8011

Machine 1: 8011 Machine 2: 8011

HTTP

HTTP

External

LBR_MSIP_T

5060

Machine 1: 5060 Machine 2: 5060

TCP

SIP

External

LBR_MSIP_U

5060

Machine 1: 5060 Machine 2: 5060

UDP

SIP

External

LBR_PSIP_T

5070

Machine 1: 5070 Machine 2: 5070

TCP

SIP

Internal

LBR_PSIP_U

5070

Machine 1: 5070 Machine 2: 5070

UDP

SIP

Internal

In Table 5-3, the following column headings are used:

- Name--Each Virtual Server should be configured with a Virtual Hostname bound to a Load Balancer. The names in Table 5-3 are for illustration purposes only.

- Listen Port--Recommended Listening Port (listening only; not ports to which they send traffic) on the Load Balancer for the Virtual Hostname.

- Members--Machine names and ports to which the specific Virtual Server directs traffic. The recommended load-balancing method is round-robin.

- Transport--The transport mechanism (either TCP or UDP) used for communication.

- Monitor--Health Monitors can be set to those described in the table for detecting unavailable nodes.

- Ext/Int--External or Internal. If External, then this Virtual Host and Port must be accessible from external clients.

5.3.3.5.5 Persistence

Configure Persistence for the LBR_SVC Virtual Server only. This ensures that existing clients are directed to the same Host. An Active Cookie-based mechanism is recommended.

5.3.3.6 Starting Servers

Servers should be started in the following order:

1. On Machine 1, start Admin Servers for the wlcs_sipinfra and wlcs_services domains, as follows:

- wlcs_sipinfra domains/wlcs_sipinfra/startWeblogic.sh

- wlcs_services domains/wlcs_services/startWeblogic.sh

2. On Machine 2, start Admin Server for the wlcs_presence domain, as follows:

- domains/wlcs_presence/startWeblogic.sh

3. On Machine 1, start wlcs_sipinfrastate1 domains/wlcs_sipinfra/bin/startManagedWeblogic.sh wlcs_sipinfrastate1

4. On Machine 2, start wlcs_sipinfrastate2 domains/wlcs_sipinfra/bin/startManagedWeblogic.sh wlcs_sipinfrastate2 <machine 1 host name:7001>

5. On Machine 1, start all engines, as follows:

- wlcs_sipinfra1 domains/wlcs_sipinfra/bin/startManagedWeblogic.sh wlcs_sipinfra1

- wlcs_services1 domains/wlcs_services/startManagedWeblogic.sh wlcs_services1

- wlcs_presence1 domains/wlcs_presence/startManagedWeblogic.sh wlcs_presence1 <machine 2 host name:7003>

6. On Machine 2, start all engines, as follows:

- wlcs_sipinfra2 domains/wlcs_sipinfra/startManagedWeblogic.sh wlcs_sipinfra2 <machine 1 host name:7001>

- wlcs_services2 domains/wlcs_services/startManagedWeblogic.sh wlcs_services2 <machine 1 host name:7002>

- wlcs_presence2 domains/wlcs_presence/startManagedWeblogic.sh wlcs_presence2

The process is complete when console output reads: <Server started in RUNNING mode>.

Note:

In Production Mode with JRockit (Customer Environment), you must enter credentials when starting both the Admin and the Managed Servers.

Note:

OWLCS is pre-configured with realm example.com. To change the realm to another value, refer to Section 5.3.3.7, "Changing Realm from example.com".

5.3.3.7 Changing Realm from example.com

After installation, the realm must be configured to be example.com. This value must be changed to reflect the real domain name used in the installation. This section describes all the places where this needs to be changed and how to change it.

- SIP Server

1. Login to the Administration Console for managing the wlcs_sipinfra domain. Administration Console for wlcs_sipinfra domain is located at: http://<machine host 1>:7001/console

2. Click the SipServer link on left navigation pane.

3. In the Configuration->General tab, scroll down to Domain Aliases: and enter the realm you want to choose (for example: myrealm.com).

- Digest Authentication

1. Login to the Administration Console of the wlcs_sipinfra domain. It can be accessed from: http://<machine 1 host>:7001/console

2. Click Security Realms on the left navigation pane.

3. Click myRealm.

4. Click the Providers tab.

5. Click DigestIdentityAsserter.

6. Click the Provider Specific tab.

7. Scroll down to DigestRealmName attribute and choose the appropriate realm (for example: myrealm.com).

Note:

Repeat steps 1-7 above for wlcs_services and wlcs_presence domains. The wlcs_services domain Admin Console can be accessed from http://<machine 1 host>:7002/console and the wlcs_presence domain can be accessed from http://<machine 2 host>:7003/console.

- Realm for Aggregation Proxy

1. Start JConsole, using the following parameters on Machine 1, as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

$DOMAIN_HOME: Absolute path to wlcs_sipinfra domain directory.

For example:

$MW_HOME/user_projects/domains/wlcs_sipinfra/
<admin server host>: Machine 1 Host Name
<admin server port>: Admin Server listen port for wlcs_sipinfra domain

In our example, <admin server port> is 7001.

2. Click the MBeans tab.

3. Expand the oracle.sdp.presence node.

4. In the subtree under oracle.sdp.presence, expand AggregationProxy node.

5. In the subtree under AggregationProxy, expand AggregationProxy.

6. In the subtree under AggregationProxy, expand both wlcs_sipinfra1 and wlcs_sipinfra2.

7. In the subtree under wlcs_sipinfra1, expand AggregationProxy node.

8. Do the same for the one under wlcs_sipinfra2.

9. In the subtree under AggregationProxy, under wlcs_sipinfra1 node, expand Attributes node. Do the same for the one under wlcs_sipinfra2.

10. In the subtree under Attributes, change the following attributes:
Realm = <yourcompany>

11. Do the same for the one under wlcs_sipinfra2.

- P-Asserted Identity URI for Third-Party Call Control

1. Start JConsole, using the following parameters on Machine 1, as outlined in Starting JConsole to Modify MBeans on UNIX.

$DOMAIN_HOME: Absolute path to wlcs_sipinfra domain directory.

For example:

$MW_HOME/user_projects/domains/wlcs_sipinfra/
<admin server host>: Machine 1 Host Name
<admin server port>: Admin Server listen port for wlcs_sipinfra domain

In our example, <admin server port> is 700.

2. Click the MBeans tab.

3. Expand the oracle.sdp.thirdpartycall node.

4. In the subtree under oracle.sdp.thirdpartycall, expand ThirdPartyCall node.

5. In the subtree under ThirdPartyCall, expand both wlcs_sipinfra1 and wlcs_sipinfra2.

6. In the subtree under wlcs_sipinfra1, expand ThirdPartyCall node.

7. Do the same for the one under wlcs_sipinfra2.

8. In the subtree under ThirdPartyCall, under wlcs_sipinfra1 node, expand the Attributes node. Do the same for the one under wlcs_sipinfra2.

9. In the subtree under Attributes, change the following attributes:
PAssertedIdentityURI=sip:tpcc.user@<yourcompany>

10. Do the same for the one under wlcs_sipinfra2.

5.3.3.8 Configuring Oracle WebLogic Communication Services

The following procedures describe configuration of Oracle WebLogic Communication Services.

5.3.3.8.1 Configuring Default Application Router (DAR)

Perform the following procedures to configure the Default Application Router (DAR):

- "Configuring DAR for wlcs_sipinfra"

- "Configuring DAR for wlcs_services"

- "Configuring DAR for wlcs_presence"

Configuring DAR for wlcs_sipinfra

Perform the following steps to configure DAR for wlcs_sipinfra:

1. Open the console application on your browser for the Administration Server corresponding to the wlcs_sipinfra domain. For example:
http://<machine 1 host>:7001/console

2. Click Sip Server under the Domain Structure navigation pane on the left.

3. Click the Application Router tab.

4. If you have installed in Production Mode, click the Lock & edit button to make changes.

5. Add the following lines to the AR Configuration Data field:

PUBLISH: ("authproxy", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0"), ("userdispatcher", "DAR:From", "TERMINATING", "sip:127.0.0.1:5070;transport=TCP;lr", "ROUTE", "1")
SUBSCRIBE: ("authproxy", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0"), ("userdispatcher", "DAR:From", "TERMINATING", "sip:127.0.0.1:5070;transport=TCP;lr", "ROUTE", "1")
REGISTER: ("proxyregistrar", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0")

6. Click Save.

7. If you have installed in Production Mode, click Activate Changes after completing the changes.

Configuring DAR for wlcs_services

Perform the following steps to configure DAR for wlcs_services:

1. Open the console application on your browser for the AdminServer corresponding to wlcs_services domain. For example:
http://<machine 1 host>:7002/console

2. Click Sip Server under the Domain Structure navigation pane on the left.

3. Click the Application Router tab.

4. If you have installed in Production Mode, click the Lock & edit button to make changes.

5. Delete the existing AR Configuration Data and add the following lines to the AR Configuration Data field:

PUBLISH: ("userdispatcher", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0")
SUBSCRIBE: ("userdispatcher", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0)

6. Click Save.

7. If you have installed in Production Mode, click Activate Changes after completing the changes.

Configuring DAR for wlcs_presence

Perform the following steps to configure DAR for wlcs_presence:

1. Open the console application on your browser for the Administration Server corresponding to wlcs_presence domain. For example:
http://<machine 2 host>:7003/console

2. Click Sip Server under the Domain Structure navigation pane on the left.

3. Click the Application Router tab.

4. If you have installed in Production Mode, click on the Lock & edit button to make changes.

5. Delete the existing AR Configuration Data and add the following lines to AR Configuration Data field:

OPTIONS: ("optionsresponder", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0")
PUBLISH: ("presence", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0")
SUBSCRIBE:  ("presence", "DAR:From", "TERMINATING", "", "NO_ROUTE", "0")

6. Click Save.

7. If you have installed in Production Mode, click Activate Changes after completing the changes.

5.3.3.8.2 XCAP Configuration

Perform the following steps to configure XCAP:

1. Start JConsole, using the following parameters on Machine 2, as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

$DOMAIN_HOME: Absolute path to wlcs_presence domain directory. For ex: $MW_HOME/user_projects/domains/wlcs_presence/
<admin server host>: Machine 1 Host Name
<admin server port>: Admin Server listen port for wlcs_presence domain

In our example, <admin server port> is 7003.

2. Click MBeans tab.

3. Expand oracle.sdp.presence node.

4. In the subtree under oracle.sdp.presence, expand XDMS node.

5. In the subtree under XDMS, expand XCAPConfig.

6. In the subtree under XCAPConfig, expand both wlcs_presence1 and wlcs_presence2.

7. In the subtree under wlcs_presence1, expand XCAPConfig node. Do the same for the one under wlcs_presence2.

8. In the subtree under XCAPConfig under wlcs_presence1 node, expand Attributes node. Do the same for the one under wlcs_presence2.

9. In the subtree under Attributes, click PublicXCAPRootUrl and change the Value to:

http://<http pool on load balancer pointing to wlcs_services>/userdispatcher

The name for <http pool on load balancer pointing to wlcs_services> is derived from the list in Table 5-3.

10. Do the same for the one under wlcs_presence2.

11. In the subtree under Attributes, click PublicContentServerRootUrl and change the value to:

http://<http pool on load balancer pointing to wlcs_services>/userdispatcher

12. Do the same for the one under wlcs_presence2.

5.3.3.8.3 Presence Configuration

Perform the following steps to configure Presence:

1. Start JConsole, using the following parameters on Machine 2, as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

$DOMAIN_HOME : Absolute path to wlcs_presence domain directory. For ex: $MW_HOME/user_projects/domains/wlcs_presence/
<admin server host>: Machine 1 Host Name
<admin server port>: Admin Server listen port for wlcs_presence domain.

In our example, <admin server port> is 7003.

2. Click on MBeans tab.

3. Expand oracle.sdp.presence node.

4. In the subtree under oracle.sdp.presence, expand Presence node.

5. In the subtree under Presence, expand Presence node.

6. In the subtree under Presence, expand both wlcs_presence1 and wlcs_presence2.

7. In the subtree under wlcs_presence1, expand Presence node. Do the same for the one under wlcs_presence2.

8. In the subtree under XCAPConfig under wlcs_presence1 node, expand Attributes node. Do the same for the one under wlcs_presence2.

9. In the subtree under Attributes, click PresRulesXCAPUri and change the value to:

sip:<presence sip pool on load balanacer>;transport=TCP;lr

The name for <presence sip pool on load balancer> is derived from the list in Table 5-3.

10. Do the same for the one under wlcs_presence2.

11. In the subtree under Attributes, click PIDFManipulationXCAPUri and change the value to:

sip:<presence sip pool on load balanacer>;transport=TCP;lr

The name for <presence sip pool on load balancer> is derived from the list in Table 5-3.

12. Do the same for the one under wlcs_presence2.

5.3.3.8.4 Aggregation Proxy Configuration

Perform the following steps to configure Aggregation Proxy:

1. Start JConsole, using the following parameters on Machine 1, as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

$DOMAIN_HOME : Absolute path to wlcs_sipinfra domain directory. For ex: $MW_HOME/user_projects/domains/wlcs_sipinfra/
<admin server host>: Machine 1 Host Name
<admin server port>: Admin Server listen port for wlcs_sipinfra domain.

In our example, <admin server port> is 7001.

2. Click MBeans tab.

3. Expand oracle.sdp.presence node.

4. In the subtree under oracle.sdp.presence, expand Aggregation Proxy node.

5. In the subtree under Aggregation Proxy, expand Aggregation Proxy.

6. In the subtree under Presence, expand both wlcs_sipinfra1 and wlcs_sipinfra2.

7. In the subtree under wlcs_sipinfra1, expand Aggregation Proxy node. Do the same for the one under wlcs_sipinfra2.

8. In the subtree under Aggregation Proxy under wlcs_sipinfra1 node, expand Attributes node. Do the same for the one under wlcs_sipinfra2.

9. In the subtree under Attributes, change the following attributes:

XCAPHost: 127.0.0.1
XCAPPort: 8011 (http listening port of wlcs_services1(2) managed servers)
XCAPRoot: /userdispatcher
ContentHost: 127.0.0.1
ContentPort: 8011 (http listening port of wlcs_services1(2) managed servers)
ContentRoot: /userdispatcher

10. Do the same for the one under wlcs_sipinfra2.

5.3.3.8.5 Web Services

Perform the following steps to configure Web Services:

1. Start JConsole, using the following parameters on Machine 1, as outlined in Section 5.3.5, "Starting JConsole to Modify MBeans on UNIX".

$DOMAIN_HOME : Absolute path to wlcs_services domain directory. For ex: $MW_HOME/user_projects/domains/wlcs_services/
<admin server host>: Machine 1 Host Name
<admin server port>: Admin Server listen port for wlcs_services domain.

In our example, <admin server port> is 7002.

2. Click MBeans tab.

3. Expand oracle.sdp.presence node.

4. In the subtree under oracle.sdp.presence, expand PresenceWebService node.

5. In the subtree under PresenceWebService, expand PresenceConsumerWebService.

6. In the subtree under Presence, expand both wlcs_presence1 and wlcs_presence2.

7. In the subtree under wlcs_presence1, expand PresenceConsumerWebService node. Do the same for the one under wlcs_presence2.

8. In the subtree under PresenceConsumerWebService under wlcs_presence1 node, expand Attributes node. Do the same for the one under wlcs_presence2.

9. In the subtree under Attributes, change the following:

SIPOutboundProxy: sip:127.0.0.1:5070;transport=TCP;lr

10. Do the same for the one under wlcs_presence2.

11. In the subtree under PresenceWebService, expand PresenceSupplierWebService.

12. In the subtree under PresenceSupplierWebService, expand both wlcs_presence1 and wlcs_presence2.

13. In the subtree under wlcs_presence1, expand PresenceSupplierWebService node. Do the same for the one under wlcs_presence2.

14. In the subtree under PresenceConsumerWebService under wlcs_presence1 node, expand Attributes node. Do the same for the one under wlcs_presence2.

15. In the subtree under Attributes, change the following attributes:

SIPOutboundProxy: sip:127.0.0.1:5070;transport=TCP;lr
PublicXCAPRootUrl: http://127.0.0.1:8011/userdispatcher/

16. Do the same for the one under wlcs_presence2.

5.3.3.8.6 Configuring User Dispatcher

Perform the following steps to configure User Dispatcher:

1. Stop all the wlcs_services servers (Admin Server for wlcs_services domain, wlcs_services1, wlcs_services2)

2. One Machine 1, go to $MW_HOME/user_projects/domains/wlcs_services/config/communications/userdispatcher

3. Edit the three files in that directory as follows:

- presence-pool.xml

<attribute name="Servers" type="java.util.List">
sip:<ip address of wlcs_presence1 instance>:<sip port of wlcs_presence1 >;transport=TCP;lr,
sip:<ip address of wlcs_presence2 instance>:<sip port of wlcs_presence2 >;transport=TCP;lr
</attribute>

- xdm-http-pool.xml

<attribute name="Servers" type="java.util.List">
http:<ip address of wlcs_presence1 instance>:<http port for wlcs_presence1 >/services,
http:<ip address of wlcs_presence2 >:<http port for wlcs_presence2 >/services
</attribute>

- xdm-sip-pool.xml

<attribute name="Servers" type="java.util.List">
sip:<ip address of wlcs_presence1 instance>:<sip port of wlcs_presence1 >;transport=TCP;lr,
sip:<ip address of wlcs_presence2 instance>:<sip port of wlcs_presence2 >;transport=TCP;lr
</attribute>

4. Restart the wlcs_services servers.

5.3.3.9 Provisioning Test Users

To confirm that the installation was successful, you should create a few test users to test out OWLCS using Oracle Communicator.

1. On Machine 1, start sash:

- On UNIX: $DOMAIN_HOME/bin/launch_sash.sh -p 8001

- On Windows: $DOMAIN_HOME/bin/launch_sash.cmd -p 8001

Note:

$DOMAIN_HOME is any domain home (wlcs_sipinfra, wlcs_services, wlcs_presence). By default the wlcs_sipinfra1 or 2 managed server picks up port 8001. If you configured the port to be something else, use that instead.

2. Provision the user: run the following command, replacing alice with username and example.com with your realm (for example: yourcompany.com).

identity add privateId=alice publicId=sip:alice@example.com role="Location Service" realm=yourcompany.com password=yourpassword

5.3.4 Testing the Installation

Perform the following procedures to test the installation:

1. Download Oracle Communicator onto a Windows machine.

2. Install Oracle Communicator by running the downloaded EXE file.

3. Provision a test user in OWLCS as described above (for example: sip:alice@example.com).

4. Create an Oracle Communicator account for sip:alice@example.com.

5. Login to Oracle Communicator, disregard the login pop up if it appears.

6. Click the menu button on the top left (Settings).

7. Choose Preferences.

8. Click the Network tab.

9. Check Use a proxy server, and enter the canonical host name of the load balancer in the Address field.

10. Do the same for XDMS Host. Ensure that the XDMS port is the HTTP listen port of the load balancer http pool.

11. Click OK.

12. Restart Oracle Communicator and log in.

13. Enter the username and the password (as chosen previously). If you can register and change your Presence status, then the installation was successful.

You can create an account for another user similarly and add him/her as a buddy to the first user. User1 should be able to send instant messages to User2, and they should be able to see each other's presence.

5.3.5 Starting JConsole to Modify MBeans on UNIX

In order to start JConsole to perform some of the modifications in this chapter, follow these steps:

1. Change to bash shell by typing bash in a terminal window.

2. source $DOMAIN_HOME/bin/setDomainEnv.sh

3. Start JConsole as follows, where JAVA_HOME points to JDK 1.6:

$JAVA_HOME/bin/jconsole -J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar:$JAVA_HOME/lib/tools.jar:$WLS_HOME/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.mbeanservers.domainruntime

4. Click Remote Process.

5. Ensure that IIOP is enabled, and configure username and password to connect to the Admin Server over IIOP. To do this:

1. Start console: http://<admin server host>:<admin server port>/console

2. Login to console: enter admin server username/password.

6. Expand the tree under Environment from the Domain Structure pane on left. Click Servers.

7. Click on Admin Server.

8. Choose Protocols tab.

9. Choose IIOP tab.

10. Make sure Enable IIOP is checked.

11. Click Advanced link to expand Advanced options.

12. Default IIOP Username: <admin server username>.

13. Default IIOP Password: <admin server password>.

14. Confirm Default IIOP Password: <admin server password>.

15. Click Save button.
(For Production Mode), click Activate Changes button on top left.

16. Restart the Admin Server and the corresponding Managed Servers.

17. Use this connect string to connect to the domain runtime MBean Server:

service:jmx:rmi:///jndi/iiop://<admin server host>:<admin server port>/weblogic.management.mbeanservers.domainruntime

18. Enter Admin Server username and password for connecting to the Admin Server.

5.3.6 Logging

All logs are written to a single file (per server) at the following location: $MW_HOME/user_projects/domains/<domain>/servers/<server>/logs/<server_name>-diagnostic.log.

5.4 Uninstalling OWLCS Components

To uninstall some or all components on Windows:

1. Choose Start > All Programs > Oracle WebLogic Communication Services 11g Home 1 > Uninstall. The Welcome screen appears.

2. Click Next.

3. Select the components you want to uninstall.

4. Click Next. The uninstall is completed.

5. Click Done.

To uninstall some or all components on UNIX:

1. Run the following script:

./MW_HOME/wlserver_10.3/uninstall/uninstall.sh

2. Follow the Uninstall wizard.

3. Manually delete the MW_HOME directory:

rm -rf MW_HOME

6 Post-Installation

This chapter describes post-installation steps for Oracle WebLogic Communication Services (OWLCS). It contains the following topics:

- Section 6.1, "Changing Realm from example.com"

- Section 6.2, "Provisioning Third-Party Call Control (TPCC) Users to Enable Third Party Call Control"

6.1 Changing Realm from example.com

The out-of-the-box realm (example.com) should be changed to reflect the realm or domain of your deployment. Make these modifications to the realm or domain:

- SIP Container Domain Aliases setting

1. Login to Console. For example: http://weblogic.example.com:7001/console

2. Click the SipServer link on left navigation pane.

3. In the Configuration->General tab scroll down to Domain Aliases and enter the realm you want to choose (for example: yourdomain.com).
Alternatively, this change can be made by editing $DOMAIN_HOME/config/custom/sipserver.xml

- Realm for Digest Identity Asserter

1. Login to the Console. For example: http://weblogic.example.com:7001/console

2. Click Security Realms on the left navigation pane.

3. Click myRealm.

4. Click the Providers tab.

5. Click DigestIdentityAsserter.

6. Click Provider Specific tab.

7. Scroll down to the DigestRealmName attribute and choose the appropriate realm (for example: yourdomain.com).
Alternatively, this change can be made by editing $DOMAIN_HOME/config/config.xml

- Realm for Aggregation Proxy

1. Open JConsole:
-J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar:$JAVA_HOME/lib/tools.jar:$WLS_HOME/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote

where $WLS_HOME = $MW_HOME/wlserver_10.3/server/

$JAVA_HOME should point to JDK 1.6

jconsole -J-Djava.class.path=%JAVA_HOME%/lib/jconsole.jar;%JAVA_HOME%/lib/tools.jar;%WLS_HOME%/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote

Once JConsole starts up, connect to the MBean Server using the following URI:

service:jmx:t3://<yourhost>:7001/jndi/weblogic.management.mbeanservers.domainruntime

2. Change the value of the following MBean attribute under AggregationProxy. Realm = <value>
For example: Realm = yourdomain.com

Alternatively, this change can be made by editing $MW_HOME/user_projects/domains/base_domain/Config/Communications/AggregationProxyServlet.xml

- P-Asserted Identity URI for Third-Party Call Control

1. Open JConsole:
$JAVA_HOME/bin/jconsole -J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar:$JAVA_HOME/lib/tools.jar:$WLS_HOME/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote

where $WLS_HOME = $MW_HOME/wlserver_10.3/server/

$JAVA_HOME should point to JDK 1.6

jconsole -J-Djava.class.path=%JAVA_HOME%/lib/jconsole.jar;%JAVA_HOME%/lib/tools.jar;%WLS_HOME%/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote

2. Once JConsole starts up, connect to the MBean Server using the following URI:
service:jmx:t3://<yourhost>:7001/jndi/weblogic.management.mbeanservers.domainruntime

3. Change the value of the following MBean attribute under oracle.sdp.thirdpartycall -> ThirdpartyCall for all server instances:
PAssertedIdentityURI: Replace domain (example.com) in default value of sip:tpcc.user@example.com

Alternatively, this change can be made by editing $MW_HOME/user_projects/domains/base_domain/Config/ThirdPartyCall.xml

Ensure that you restart all instances of the OWLCS servers after making the above configuration changes.

6.2 Provisioning Third-Party Call Control (TPCC) Users to Enable Third Party Call Control

Authentication for INVITE requests initiated by Third Party Call Control is accomplished by inserting a P-Asserted Identity Header in the request by the Third Party Call Control application. By default, the PAssertedIdentityURI is set to sip:tpcc.user@example.com; for authentication to be successful, you must create and provision the corresponding TPCC user. To create and provision the user:

1. Use Sash to issue the following command:

identity add privateId=tpcc.user publicId=sip:tpcc.user@example.com realm=example.com role="Location Service"

2. Enter a password of your choice when prompted (this password is not part of TPCC configuration, so an actual value is not used anywhere).

3. Ensure you replace example.com with the realm or domain for your installation. Third Party Call Control will not work if the above user is not created and provisioned.

Note:

For more information on provisioning users and using Sash, see Oracle WebLogic Communication Services Administrator's Guide.

7 Troubleshooting

This chapter describes typical installation and configuration problems and their solution. It contains the following sections:

- Section 7.1, "Port Conflicts"

- Section 7.2, "Loss of Network Connection During Installation"

- Section 7.3, "Cleanly Uninstalling OWLCS"

7.1 Port Conflicts

As described in "Section 1.2.2, "Port Requirements"" in the Product and Installation Overview chapter of this guide, OWLCS requires the use of specific ports.

The installers perform checks of the ports during installation to make sure there are no conflicts.

7.2 Loss of Network Connection During Installation

During OWLCS installation, an active network connection is required.

In the uncommon event that a network connection is lost during installation, the installation can fail.

7.3 Cleanly Uninstalling OWLCS

You should always use the uninstaller to cleanly uninstall an OWLCS installation since manually deleting OWLCS can result in problems if OWLCS is to be installed again.

A Creating a Silent Installation

The following sections describe how to create a silent installation of Oracle WebLogic Communication Services. Topics include:

- Section A.1, "Base Platform"

- Section A.2, "Services"

A.1 Base Platform

Silent install of the Oracle WebLogic Communication Services Base Platform is achieved using the owlcs10310_generic.jar. The install can be triggered using the following command:

<JAVA_HOME>/bin/java  -Djava.io.tmpdir=/tmpDir  -jar owlcs10310_generic.jar -mode=silent -silent_xml=silent.xml -log=install.log -log_priority=debug

where:

tmpDir is the temporary directory where the files are stored

silent.xml defines the required input details for the base platform installation

install.log is the location of the log file which contains the complete output log of the installation

log_priority=debug denotes the level of logging

The only mandatory value in the silent.xml file for the install is the BEAHOME. BEAHOME is the target directory where the Base platform is to be installed:

<?xml version="1.0" encoding="UTF-8" ?>
<domain-template-descriptor>
<input-fields>
<data-value name="BEAHOME" value="/scratch/user1_silentinstall/run7/mwhome" />
<data-value name="WLSS_INSTALL_DIR" value="/scratch/user1_silentinstall/run7/test1/wlcservices_10.3" />
<data-value name="WLS_INSTALL_DIR" value="/scratch/user1_silentinstall/run7/test2/wlserver_10.3" />
<data-value name="COMPONENT_PATHS" value="WebLogic Server|WebLogic Communication Services" />
</input-fields>
</domain-template-descriptor>

BEAHOME= MW Home (Mandatory)
WLSS_INSTALL_DIR= Directory for wlcservices_10.3 (Default to $MW_HOME/wlcservices_10.3)
WLS_INSTALL_DIR= Directory for wlserver_10.3 (Default to $MW_HOMEwlserver_10.3)
COMPONENT_PATHS= "WebLogic Server|WebLogic Communication Services" (Defaults to both the products)

There are additional values which can be provided to configure:

- USER_INSTALL_DIR

- WLS_INSTALL_DIR

- JAVA_HOME

As they are not mandatory, the automatic default values would be taken for installation.

A.2 Services

Silent install of the Oracle WebLogic Communication Services (Presence and SIP Infrastructure Components) is similar to other SOA Components. The install can be triggered using the following command:

./runInstaller -jreLoc <JRE_LOC> -printtime -printmemory -printdiskusage -invPtrLoc oraInst.loc -novalidation -ignoreSysPrereqs -force -silent -response silent.rsp -waitforcompletion

where:

JRE_LOC is the JDK6 location

invPtrLoc is the location to the oraInventory

silent.rsp is the response file for the silent install mode. The silent.rsp is of the following format:

[ENGINE]
VERSION=1.0.0.0.0
[Generic]
MIDDLEWARE_HOME=/scratch/aime1/work/mw9519
ORACLE_HOME=/scratch/aime1/work/mw9519/owlcs1456

MIDDLEWARE_HOME is the bea home as provided in the base platform install.

ORACLE_HOME is the target directory for the install.

Configuration using Silent install mode is achieved through WLST commands to read and apply templates.

Index

A  D  E  I  J  L  M  N  O  P  R  S  T  U  V  W  X

A

Administration Server

starting, 5.1.3, 5.2.3

Aggregation Proxy

configuring, 5.3.3.8.4

All-in-One Administration Server, 1.4.1

architecture, 5.2

configuring, 5.2

All-in-One Managed Server, 1.4.2

architecture, 5.1

configuring, 5.1

D

database schemas

creating, 2

existing, 2.1

Default Application Router (DAR), 5.3.3.8.1

configuring for wlcs_presence, 5.3.3.8.1

configuring for wlcs_services, 5.3.3.8.1

configuring for wlcs_sipinfra, 5.3.3.8.1

E

Enterprise Deployment

architecture, 5.3.1

configuring, 5.3

prerequisites, 5.3.2

topology, 5.3.1

example.com

changing realm, 5.1.2, 5.2.2, 5.3.3.7, 6.1

preconfigured realm, 5.1.1, 5.2.1

I

installation

All-in-One Administration Server, 4

All-in-One Managed Server, 4

Enterprise Deployment, 4

modes, 1.4

testing, 5.1.6, 5.2.5, 5.3.4

topologies, 4

J

JConsole, 5.3.5

modifying MBeans with, 5.3.5

JDK 1.6, 1.2.1

JRockit SDK 1.6, 1.2.1

L

load balancer

configuring, 5.3.3.5

logging, 5.1.7, 5.2.6, 5.3.6

log files, 5.1.7, 5.2.6, 5.3.6

M

Managed Server

starting, 5.1.4

Microsoft Windows, 1.2.1

N

network connection

loss of, 7.2

O

operating system requirements

UNIX, 1.2.1

Oracle Database 10g Express Edition, 1.2.1

Oracle RDBMS Server 10.2.0.4, 1.2.1

Oracle WebLogic Communication Services (OWLCS)

configuring, 5

installing, 4

overview, 1

post-installation, 6

Oracle WebLogic Communication Services Base Platform

installing, 3

Oracle WebLogic Communication Services Configuration Wizard, 5

Oracle WebLogic SIP Server

installing, 3.1

OWLCS

components, 1.5

installation modes, 1.4

overview, 1

port requirements, 1.2.2

post-installation steps, 6

system requirements, 1.2.1

troubleshooting, 7, 7

uninstalling, 5.4

OWLCS Components

installing, 4.1

P

port conflicts, 7.1

troubleshooting, 7.1

post-installation, 6, 6

Presence

configuring, 5.3.3.8.3

Presence components

installing, 4.1

provisioning Third-Party Call Control (TPCC), 6.2

R

RCU, 2

RDBMS Server 11.1.0.7, 1.2.1

Repository Creation Utility (RCU), 2

creating database schema using, 2.2

installing, 2.1

S

servers

starting, 5.3.3.6

silent installation

base platform, A.1

creating, A

services, A.2

SIP Infrastructure

installing, 4.1

starting, 5.3.5

T

testing installation, 5.1.6, 5.2.5

Third-Party Call Control (TPCC)

provisioning, 6.2

troubleshooting, 7

U

uninstalling

manual, 7.3

uninstalling OWLCS, 5.4, 7.3

User Dispatcher

configuring, 5.3.3.8.6

users, 5.1.5, 5.2.4, 5.3.3.9

provisioning, 5.1.5, 5.2.4, 5.3.3.9

V

virtual server, 5.3.3.5.4

W

Web Services

configuring, 5.3.3.8.5

X

XCAP

configuring, 5.3.3.8.2

Copyright © 2006, 2011, Oracle and/or its affiliates. All rights reserved.