| Oracle® Communicatorユーザーズ・ガイド 11gリリース1（11.1.1） B61380-01 |
|
 戻る |
 次へ |
この付録には、第5章「Oracle Communicatorの構成」で説明されているOracle Communicatorのcustomize-sample.xmlファイルが含まれます。
customize-sample.xml（例A-1）は、customize.xmlのテンプレート・ファイルです。
例A-1 customize-sample.xml
<Customize>
-
<!--
in order to provide default settings for the installation,
this file should be edited and renamed customize.xml,
then included in the Oracle Communicator installation
self-extracting RAR (i.e. OracleCommunicatorSetup.exe)
for true/false values, 0 means false, 1 means true
it is expected that most administrators will need
to modify at least the proxy and XDMS settings to
reflect the site topology, and that most administrators
will choose to modify the STUN and LDAP settings
as well
this file lists default values; any property in this
file may be removed with no impact on the installation;
it is recommended that an administrator only keep
those properties for which they intend to use
non-default values
-->
-
<!--
the Vendor section contains properties that will
remain the same for all user accounts in the
installation and is not editable through the
UI by the user
-->
-
<Vendor>
-
<!--
if 1, the "Service Settings" menu option will
be visible, which will open the URL specified
in Account/Provisioning/Location in a browser
-->
<SelfProv>0</SelfProv>
-
<!--
if 1, a user can configure network settings for
OutBoundProxy, STUN and LDAP under Network Preferences.
if 0, these settings will be disabled and greyed out
-->
<NetworkSettingsEditable>1</NetworkSettingsEditable>
</Vendor>
-
<Account>
<!-- whether or not to use the outbound proxy -->
<UseOutboundProxy>1</UseOutboundProxy>
-
<!--
the address of the proxy server, preceded by sip:
if this is not specified, the default is
outbound.<host> where <host> comes from the user's
SIP address
-->
<OutboundProxyAddress>sip:outbound.example.com</OutboundProxyAddress>
<!-- the default UI theme to use -->
<Theme>Slate</Theme>
-
<!--
the default save password state; the user can toggle this
-->
<SavePasswordPreference>1</SavePasswordPreference>
-
<!--
the XDMS server, presence rule and hard state settings;
if this is not specified the default for the Host is
xcap.<host> where <host> comes from the user's SIP address;
the other values are the same as default except RootContext
defaults to services instead
-->
-
<XDMSSettings>
<UseHttps>0</UseHttps>
<Host>xcap.example.com</Host>
<Port>8888</Port>
<RootContext>aggregationproxy</RootContext>
<PresRuleAUID>pres-rules</PresRuleAUID>
<PresRuleDocName>presrules</PresRuleDocName>
<HardStateAUID>pidf-manipulation</HardStateAUID>
<HardStateDocName>hardstate</HardStateDocName>
<ResourceListsAUID>resource-lists</ResourceListsAUID>
<ResourceListsDocName>index</ResourceListsDocName>
</XDMSSettings>
-
<!--
whether to use rport as described in RFC 3581 for
NAT traversal; the default is 0; rport may
not be supported by OCMS in a cluster environment,
in which case this should be 0
-->
<UseRPortForNatTraversal>1</UseRPortForNatTraversal>
<!-- the STUN server -->
<UseStun>0</UseStun>
<StunServerAddress>stun.example.com</StunServerAddress>
<StunServerPort>3478</StunServerPort>
-
<!--
the LDAP server(s) to use for contact searching; by
default no LDAP server is provided
-->
-
<LdapServers>
-
<LdapServer>
<Name>ldap.example.com</Name>
<Ip>ldap.example.com</Ip>
<Port>389</Port>
<BaseObject>dc=example,dc=com</BaseObject>
<Default>yes</Default>
<UseTLS>0</UseTLS>
<UseAuthentication>0</UseAuthentication>
-
<!--
the attribute to use as the distinguished name
for authorization
-->
<AuthorizationAttribute>uid</AuthorizationAttribute>
-
<!--
the SipUriAttribute indicates which
LDAP schema attribute, if any, should be
mapped to the SIP address of a contact
-->
<SipUriAttribute>mail</SipUriAttribute>
-
<!--
if true, indicates the SIP address
of the contact returned by the LDAP server
will have the sip: protocol prepended
-->
<SipUriProtocolPrefix>0</SipUriProtocolPrefix>
-
<!--
if true, this will cause the SIP address
of the contact returned by the LDAP server
to be made lowercase
-->
<SipUriLowercaseTransform>1</SipUriLowercaseTransform>
</LdapServer>
</LdapServers>
-
<!--
the URL to launch if the user selects "Service Settings"; that
option will only be available to the user if Vendor/SelfProv
is 1
-->
-
<Provisioning>
<Location>http://example.com/selfprovisioning</Location>
</Provisioning>
-
<!--
Notifications has two functions: (1) to control client upgrades and
(2) to provide client-side notification messages. This information is
contained in a notification.xml document on the server. Enable/disable
this feature here and provide the URL location of this xml document.
by default, VersionControl is disabled
-->
-
<Notifications>
<!-- 0 disabled, 1 enabled -->
<UseNotifications>0</UseNotifications>
<!-- xml document location -->
<Location>http://notification.example.com/notification.xml</Location>
</Notifications>
-
<!--
enables/disables the file transfer functionality; in order
to support file transfer you must have the FileTransferServlet
deployed; the Location should be the full URL of the
FileTransferServlet (e.g. http://example.com/filetransfer)
-->
<FileTransferEnabled>0</FileTransferEnabled>
-
<FileTransfer>
<Location/>
</FileTransfer>
-
<!--
enables/disables SMS menu options; if this is true, it is
assumed there is a server-side piece that can recognize
and send SMSes (i.e. the client does not handle sending the
SMS itself)
-->
<SMSEnabled>0</SMSEnabled>
-
<!--
enables/disables the history, which logs all calls and IM
conversations; the user can toggle through the Preferences dialog
-->
<HistoryEnabled>1</HistoryEnabled>
-
<!--
the number of days history items will be kept; valid values are:
-1 - history items never deleted
0 - history items deleted on signout
14 - history items deleted after 14 days
30 - history items deleted after 30 days
-->
<HistoryExpirationDays>14</HistoryExpirationDays>
-
<!--
enables/disables TLS (Transport Layer Security) for any communication. Note that TLS should be enabled on server for TLS to work.
-->
<UseTLS>0</UseTLS>
</Account>
</Customize>
