Understanding Course SessionsThis chapter provides an overview of course sessions and discusses how to:
Plan and set up course sessions.
Set up course session costs.
Close completed or canceled sessions.
Record student feedback.
Understanding Course SessionsThis section lists common elements and discusses cut sessions.
Common Elements Used in This Chapter|
Business Unit |
Select the unit to which a cost should be applied when you update budgets, using the Compute Student Costs and Update Planned and Real Costs processes. |
|
Department |
Select a department to associate with the selected business unit. |
|
TrngReq Nbr (training request number) |
The system displays this number on some course evaluation pages. |
|
(FRA) Financing Department |
Select the department that finances the training session. |
|
(FRA) Financed Cost |
Enter the amount if some or all of the cost is financed by an external fund. |
|
(FRA) Financing Fund |
Select the fund that is financing the cost. Define funds in the Vendor table. |
Cut SessionsCourse sessions can be divided into cut sessions. Each cut session has its own start date, end date, location, and instructor. Use cut sessions for course sessions that:
Don't run consecutively from start to finish, such as a course that runs two days a week for a month.
Are held in various training rooms or facilities.
Have multiple instructors.
See Also
Defining Training Courses and Programs
Planning and Setting Up Course Sessions
This section discusses how to:
Plan new course sessions.
View instructor schedules.
Set up general session information.
Set up session locations and instructors.
View and update session address and contact details.
Select training rooms.
Choose instructors.
Specify required equipment and materials.
View available equipment and materials.
Define miscellaneous expenses.
View session details.
Pages Used to Plan and Set Up Course SessionsPlanning New Course Sessions
Access the Course Session Planner page (Enterprise Learning, Define Course/Cost Details, Course Session Planner, Course Session Planner).
|
Start Date and End Date |
When you enter dates in these fields, the system updates the instructor grid with the qualified instructors who are booked during the specified period. If you have specified a facility, the system updates the facility grid with existing bookings. You can make this period as long as you want and then adjust the dates as you narrow the search for available instructors and training rooms. The system doesn't check instructor or facility availability until you select a start date. Before setting up the course session, you must complete both dates, because they become the course session start and end dates when you click Course Session Setup. |
|
Start Time and End Time |
The system displays these fields when you enter the end date. Enter the start and end times for the course session. |
|
Course Session Setup |
Click to set up the course session. The Instructor and Facility fields aren't mandatory, so you can set up a course session with just one of them completed. If you don't select an end date, or if the instructor or training room that you selected is booked, you can't click the link. When you click Course Session Setup, the system transfers you to the Course Session component and copies the data from the Course Session Planner page. When you save the Course Session component, the system returns to the Course Session Planner page. |
|
Facility |
Select a facility from the list. When you move out of the field, the system checks the Course Session Table for existing bookings and displays in the Training Room Booked Time group box the dates and times when training rooms at the facility are booked during the specified period. Click the Room Number link in that group box to check the Crse Session Planner Facility page for booking details. If the Training Room Booked Time group box is blank, the facility is available during the specified period. |
|
Room Code |
The system makes this field available for entry when you complete the Facility field. Select a room code from the list. When you leave the field, the system checks existing room bookings and updates the Training Room Booked Time group box to show the bookings for the selected room. If this group box is blank, there are no bookings for that room. |
|
Instructor |
Select an instructor from the list. When you leave the field, the system checks the instructor's availability and lists in the Instructor Booked Time group box the dates and times that the instructor is unavailable during the specified period. Click the instructor's name in that group box to view the Course Session Planner Instr. page, where you can view the reason that the instructor is unavailable. The system also checks the instructor's training schedule and absence history. If the Instructor Booked Time group box is blank, the instructor is available for the specified period. |
|
Room Number |
Click the room number link to access the Crse Session Planner Facility page and view training facility information. |
|
Name |
Click the name link to access the Course Session Planner Instr. page and view instructor information. |
Viewing Instructor Schedules
Access the Course Session Planner Instr. page (click Instructor name link on the Course Session Planner page).
The data on this page comes from the instructor's absence history if the instructor has a planned absence, or from the Course Session table if the instructor is scheduled to teach.
|
Description |
If the instructor is scheduled to teach, the system displays the name of the course. Otherwise, the system displays the reason for the instructor's absence. |
Setting Up General Session Information
Access the Course Session Profile page (Enterprise Learning, Define Course/Cost Details, Course Sessions, Course Session Profile).
To set up course sessions, you must have created the course in the Course table, given it an Active status, and selected the Session Administration check box.
|
Session Number |
If you add a new session and leave this blank, a sequential session number is generated. You can reuse session numbers from completed or canceled sessions. |
|
Session Status |
Select a status: Active: Select this default status when you create a new course session. You can enroll students only in active sessions. Canceled: Select if the session has been canceled. Complete: Select if the course session has been completed. This updates data for each enrollee. |
|
Start Date, End Date, Start Time, and End Time |
When you change the start or end date, the system updates the student training records for students who are on waiting lists or enrolled in course sessions. Note. (FRA) The system uses the session start date to determine the fiscal year in which costs are charged. If the session dates cover two fiscal years (that is, the start date is before December 31 and the end date is after January 1). Then, the costs may not occur properly and chargeable costs may not be reported correctly on the 2483 report. In this case, it is better to create two separate sessions. |
|
Rescheduled |
Select if you change session information, such as dates or times, so that you know that you've made changes to the original information. When you select this check box and save the page, the system changes the letter code in the student training record to RSC (reschedule). You can create a form letter to notify students of rescheduled sessions. |
|
Session Administration |
When selected, this session appears in the search results for the Enroll Individually component (COURSE_ENROLLMENT1) if it meets the search criteria. You must select this check box to enroll learners in this session by using the Enroll Individually component. The system selects this check box by default, but you can deselect it. |
|
Duration and Duration Unit |
Automatically populated from the Course table. You can change these values. |
|
Minimum Nbr of Students and Maximum Nbr of Students (minimum number of students and maximum number of students) |
Automatically populated from the Course table. If you're enrolling students in this session using the Course Auto Enrollment page, enter a number in the Maximum Nbr of Students field—otherwise the system can't enroll any students in the course. If you select a training facility code on the Course Session Table - Location, Instructor page, the system validates the number that you enter in the Maximum Nbr of Students field against the room's maximum capacity. |
|
Session Language |
This field is available if the course is designated as multilingual on the Course Table - Course Profile page. |
|
Vendor ID |
Select a vendor ID if you're outsourcing any part of a session to a vendor. Vendor IDs are stored in the Vendor table. |
See Also
Closing Completed or Canceled Sessions
Setting Up Session Locations and Instructors
Access the Course Sessions - Location, Instructor page (Enterprise Learning, Define Course/Cost Details, Course Sessions, Location, Instructor).
Training Location
This scroll area contains details about all course session locations. You can select a training facility from the Training Facility table or specify a vendor if the course is at an external site.
|
Start Date, End Date,Start Time, and End Time |
Displays the course session dates and times. If the course session is divided into cut sessions, insert a row for each session, adjust the dates for each row, and adjust the times, if they vary. |
|
Duration and Duration Unit |
Automatically populated from the Course Session Table - Course Session Profile page. If the course session is divided into cut sessions, adjust for each cut session. Make sure that the duration of all cut sessions equals that of the course session. |
|
Facility |
If the session is at a facility that you set up in the Training Facility table, select the appropriate facility. When you leave this field, the system completes the facility name fields; you can't change them. If the training facility isn't set up in the Training Facility table, leave this field blank. |
|
Vendor ID |
If a vendor is managing the course session, select a vendor ID. When you leave this field, the system enters the vendor name. |
|
Select free Training Room |
Click this link to access the Select Free Training Room page. The system displays rooms that are available during the specified period. If the Facility field is blank, this link is unavailable. After you select a room on the Select Free Training Room page, the room code, room name, building, floor number, and maximum number of students appear on the Course Sessions - Location, Instructor page. (The building and floor number are optional fields on the Training Facility Table - Training Rooms page and only appear if applicable.) |
|
Training Facility Address |
Click to access the Training Facility Address page, which displays the address of the selected facility or vendor. If the Facility and Vendor ID fields are blank, the Training Facility Address page is blank. |
Instructor
|
Vendor |
If the instructor is from a vendor, select the vendor ID. When you leave this field, the system displays the vendor name. |
|
Select free Instructor |
Click this link to access the Select Free Instructor page. The system displays qualified instructors who are available during the specified period. After you select an instructor, the instructor ID and name appear on the Course Sessions - Location, Instructor page. |
Viewing and Updating Session
Address and Contact Details
Access the Training Facility Address page (click Training Facility Address on the Course Sessions - Location, Instructor page).
The system completes fields on this page from the Training Facility table or the Vendor table, depending on the selections on the Course Session Table - Location, Instructor page.
|
Contact Name |
Enter the name of a contact at the training facility. If you selected a facility on the Course Session Table - Location, Instructor page, the system displays the contact name from the Training Facility Table - Contacts and Equipment page. You can update the name. |
|
Phone |
Enter the telephone number of the person named in Contact Name. If the person has a business phone number specified, the system completes the Phone field automatically. You can update the number. |
|
Country |
If you selected a training facility or a vendor on the Course Session Table - Location, Instructor page, the system completes the Country and address fields, making them unavailable for entry. If the Country field is blank, select from the list of valid values. When you leave the field, the system dynamically generates that country's proper address format, as specified on the Country Table, Address Format page. |
Choosing Training Rooms
Access the Select Free Training Room page (click Select free Training Room on the Course Sessions - Location, Instructor page).
The system displays the rooms that meet these criteria:
The room is available during the period that you specified on the Course Session Table - Location, Instructor page.
The room can accommodate the maximum number of students that you specified on the Course Session Table - Course Session Profile page.
|
Room Code |
Select a check box to book the associated training room for the course session or cut session. |
|
Room Nbr (room number) |
System displayed. You set up training rooms in the Training Facility Table page. |
Choosing Instructors
Access the Select Free Instructor page (click Select free Instructor on the Course Sessions - Location, Instructor page).
The system includes displays instructors who are:
Qualified to teach the course.
You use the Instructor Table - Qualification page to define the courses that an instructor can teach. If the course is multilingual, the system checks the instructor's language skills. Only instructors who can teach in the language you specified on the Course Session Table - Course Session Profile page are on the list. Record instructors' language abilities in their profile. The system checks instructor's PERSON profile type only. Profiles are defined in the Manage Profiles business process
Available during the period that you specified on the Course Session Table - Location, Instructor page.
The system checks the instructor's teaching schedule and absence data. This prevents you from scheduling instructors during planned absence periods, such as vacations.
|
Select |
Select a check box to book the associated instructor for the course session or cut session. |
|
Instructor ID and Name |
System displayed. You set up instructors on the Instructor Table - Instructor Profile page. |
See Also
Specifying Required Equipment and Materials
Access the Course Sessions - Equipment page (Enterprise Learning, Define Course/Cost Details, Course Sessions, Equipment).
Training Room Equipment
This scroll area displays details of the training facility that you selected on the Course Session Table page. If you divided the course session into cut sessions, check the details of the training facility for each cut session.
|
Training Facility Equipment |
Click to display the shared equipment that is available at the training facility. If you haven't specified a facility, this link is unavailable. |
Fixed Equipment/Materials
If you selected a training facility code on the Course Session Table - Location, Instructor page, the system displays the fixed equipment available in the selected training room. Facility equipment is defined on the Training Facility Table - Training Rooms page.
Session Equipment/Materials
Use this scroll area to specify the equipment and materials required for the course session. The list is initially populated by the Course Cost - Vendor, Facility, and Equipment page.
|
Equipment/Materials Code (equipment code) |
You set up equipment or material codes on the Equipment and Materials page. If you selected a training facility on the Course Session Table - Location, Instructor page, you don't need to include the fixed equipment shown in the Fixed Equipment/Materials scroll area. |
Note. To find out whether the equipment required for the course session is available at the training facility, generate the Equipment Checklist report.
Viewing Available Equipment and Materials
Access the Training Facility Equipment page (click the Training Facility Equipment link on the Course Sessions - Equipment page).
This group box lists the equipment that is available at the training facility. It includes only equipment that is shared among training rooms, not the fixed equipment associated with individual training rooms. Define training facility equipment on the Training Facility Table - Contacts and Equipment page.
Defining Miscellaneous Session Expenses
Access the Course Sessions - Expense page (Enterprise Learning, Define Course/Cost Details, Course Sessions, Expense).
Use this scroll area to list the types of expenses that are associated with this course session. The list is initially populated by fields from the Course Cost - Instructor, Expense page.
Viewing Session Details
Access the Review Session Summary page (Enterprise Learning, Result Tracking, Review Session Summary, Review Session Summary).
If the course session hasn't ended, the system shows who is enrolled or wait listed. If the course session has ended, the system shows which students completed the course and what their grades were.
All data that the system displays on the Review Session Summary page comes from the Course Session table.
|
Status |
Displays the session status: Active: The default status when you add a new session. Canceled: The session has been canceled. Complete: The course session has completed. |
|
Grade |
If a student has successfully completed the course, the system displays the student's grade. Enter grades on the Student Training - Course Student Enrollment page. |
Setting Up Course Session Costs
Different sessions of the same course might have different costs, if a course is taught in multiple geographical areas or facilities, for example. If you defined general course costs in the Course Cost table, you can modify them at the session level.
This section discusses how to:
Enter vendor costs for a course session.
Set up session costs associated with the facility and instructor.
Record costs associated with required equipment.
Record costs associated with session expenses.
Note. Establish costs for training facilities only if you use training budgets.
Note. The annuity factor must be set before entering costs.
See Also
Understanding Training Cost Units
Pages Used to Set Up Course Session Costs|
Page Name |
Definition Name |
Navigation |
Usage |
|
CRS_SESSN_TBL5_GBL |
Learning, Define Course/Cost Details, Course Session Costs, Vendor |
Enter vendor costs for a course session. Vendor costs are set up in the Course Session table. |
|
|
CRS_SESS_TBL6A_GBL |
Learning, Define Course/Cost Details, Course Session Costs, Facility, Instructor |
Set up session costs that are associated with the facility and instructor. If you divided the course session into cut sessions, enter costs for each cut session. |
|
|
CRS_SESS_TBL7A_GBL |
Learning, Define Course/Cost Details, Course Session Costs, Equipment |
Record costs that are associated with course equipment. |
|
|
CRS_SESSN_TBL8_GBL |
Learning, Define Course/Cost Details, Course Session Costs, Expense |
Record costs associated with session expenses. You can enter costs only for the expense types that you specified on the Course Session Table - Expense page. |
Entering Vendor Costs for a Course Session
Access the Course Session Costs - Vendor page (Enterprise Learning, Define Course/Cost Details, Course Session Costs, Vendo).
If the vendor manages all training requirements—such as facilities, equipment, and instructors—for a single cost, you need only enter that amount here, without providing information on the other pages in this component.
|
Per Unit Cost |
Enter for the vendor that is associated with this course session. Select a currency if it is not the default currency. If you didn't specify a vendor for this course session, this field isn't available. Specify the default currency for business units for a budget period on the Budget Period table. Budgets are automatically converted to the default base currency that you established on the Training Base Currency table (TRN_BASE_CURRENCY). |
|
Cost Unit |
Select the unit that is associated with the amount in the Per Unit Cost field; for example: Hour: To track hourly charges. Day: If the vendor bills by the day. |
|
Refresh |
Click the Refresh button to display the default values from the Vendor Setup page. |
Note. If you don't enter business unit and department information on this page, the system looks at the employee's record for this course session on the Enroll Individually page (COURSE_ENROLLMENT) when it processes student costs.
(FRA) France
You define additional course session cost financing information for 2483 report requirements.
|
Certified |
Select if the vendor administering the course session is government-certified. |
|
Chargeable |
Select to make the training course a chargeable item for the 2483 report. When selected, related costs that you entered are reported in the 2483 report. This is used to meet French legal reporting requirements. The default value derives from the chargeable flag set in the Course Profile page and by the Compute Student Cost process. |
|
Billed |
Select to include the vendor cost in the 2483 report. Deselect the check box to track the cost but not have it included in the 2483 report. |
|
Date Entered |
Enter the date that the agreement between the vendor and the government body was recorded in the system. |
|
Agreement Date |
Enter the start date for the agreement between the vendor and the government body. |
|
Company |
Select the government body that the vendor has an agreement with. |
|
Agreement Number |
The Agreement number is the number assigned between the two parties. |
See Also
Calculating and Maintaining Student Costs
(FRA) Producing the French Training Report 2483
Setting Up Session Costs That Are Associated with the Facility and
Instructor
Access the Course Session Costs - Facility, Instructor page (Enterprise Learning, Define Course/Cost Details, Course Session Costs, Facility, Instructor).
Facility
This data comes from the Course Session table. If you didn't specify a training facility, the fields are unavailable. If you divided the course session into cut sessions, enter facility costs for each cut session.
|
Vendor |
If the session is at a vendor site, this field is unavailable. |
|
Per Unit Cost |
Enter for the facility where the session is held. You can update the cost currency. Specify the default currency for business units for a budget period on the Budget Period table. Budgets are automatically converted to the default base currency that you establish on the Training Base Currency table (TRN_BASE_CURRENCY). |
|
Cost Unit |
Select the unit in which the facility's per unit cost amount is measured. For example, if you're tracking hourly charges, select Hour. |
|
Refresh button: |
Click the Refresh button to display the default values from the Facility Setup table. |
Note. If you don't enter business unit and department information here, the system looks at the employee's record for this course session on the Enroll Individually page (COURSE_ENROLLMENT) when it computes the costs for budget processing.
Instructor
Instructor data is populated from the Course Session Table - Location, Instructor page. Instructor costs are populated from the Instructor Table - Instructor Profile page. If instructors aren't specified, the fields are unavailable.
If you divided the course session into cut sessions, enter instructor costs for each cut session.
|
Instructor |
Displays information from the Course Session table. If the instructor is internal, the cost is defaulted from the costs defined on the Trainees Salary Costs page. If the instructor is external, the cost is defaulted from the Instructor Setup table located on the Setup HRMS, Product Related, Learning, Instructors page.
Note. Paid Hours is the cost
unit for an internal instructor. This cost unit is useful when computing chargeable
costs. You can compute the chargeable cost this way: Per Unit Costs = Employee
Salary * Session Duration / Paid Hours. The system derives the Paid Hours
value from the Trainees Salary Costs page. |
|
Vendor |
If the instructor works for a vendor, the system displays the vendor ID, and the field is unavailable. If the instructor isn't from a vendor, the field is blank. |
|
Per Unit Cost |
Enter the cost for the instructor associated with this session. In the next field, the default currency appears. You can select a different currency. |
|
Cost Unit |
Select the unit in which the instructor's per unit cost amount is measured. For example, if the instructor is paid a daily rate, select Daily. |
|
Refresh button |
Click the Refresh button to display the default values from the Course Session Costs—Facility, Instructor page. |
|
Duration and Unit |
These values are populated from the Course Session table. Update them if the instructor costs don't match the session duration. For example, if the session duration is 2.5 days but the instructor charges for 3 days, update the Duration field to 3 days. Updating this field doesn't change the data in the Course Session table. |
|
System Maintained |
When this option is selected it pertains only to internal instructors and the Per Unit Cost field is deactivated. In this case, the Compute Student Costs process gets salary costs defined on the Trainees Salary Cost page. When System Maintained is deactivated, you can specify the cost on this page and the Compute Student Costs process use this page to compute the instructor chargeable cost. |
|
(FRA) Chargeable |
Select to make the training course a system chargeable item for the 2483 report. When selected, related costs are entered into the 2483 report. This is used to meet French legal reporting requirements. The default value of the chargeable flag set in the Course Setup page and by the Compute Student Costs process. |
Recording Costs That Are Associated with Required Equipment
Access the Course Session Costs - Equipment page (Enterprise Learning, Define Course/Cost Details, Course Session Costs, Equipment).
The system gets equipment and materials data from the Course Session table. To update or modify information, use the Course Session Table - Equipment page.
If you didn't specify equipment or materials for this course session, the fields are unavailable.
|
Per Unit Cost |
Enter an amount for the item specified by the equipment code. Select a cost currency to change the default for this cost. Specify the default currency for business units for a budget period on the Budget Period table. Budgets are automatically converted to the default base currency that you establish on the Training Base Currency table (TRN_BASE_CURRENCY). |
|
Quantity |
Initially populated by the Course Session table. If you enter a new quantity and save the changes, the system updates the data in the Course Session table. |
Note. If you don't enter business unit and department information here, the system looks at the employee's record for this course session on the Enroll Individually page (COURSE_ENROLLMENT) when it computes the costs for budget processing.
Recording Costs That Are Associated with Course Session Expenses
Access the Course Session Costs - Expense page (Enterprise Learning, Define Course/Cost Details, Course Session Costs, Expense).
Before entering cost information for course session expenses, associate the expenses with a course session on the Course Session Table - Expense page. If you didn't specify expenses for this session, the Per Unit Cost and currency fields are unavailable.
|
Per Unit Cost |
Enter a per unit cost for each expense type that is associated with this course session. The default currency is displayed; you can select a different currency. Specify the default currency for business units for a budget period on the Budget Period table. Budgets are automatically converted to the default base currency that you establish on the Training Base Currency table (TRN_BASE_CURRENCY). |
|
Cost Unit |
Select the unit in which the per unit cost amount is measured. For example, if you're tracking hourly charges for parking, select Hour; if you reimburse a flat rate for parking, choose Flat Cost. |
|
Business Unit |
If you're entering information for more than one expense, you can specify that each one be billed to a different business unit and department. |
Note. If you don't enter business unit and department information here, the system looks at the employee's record for this course session on the Enroll Individually page (COURSE_ENROLLMENT) when it computes the costs for budget processing.
Closing Completed or Canceled Sessions
Once a course session has taken place—or when you cancel a session—you need to indicate that the session is closed.
To close or cancel a course session:
Select the course session from the Course Session table.
Access the Course Session Table - Course Session Profile page (Enterprise Learning, Define Course/Cost Details, Course Sessions, Course Session Profile) and select the session from the list of active sessions.
Change the session status to Complete, if the session has finished, or Canceled, to cancel it.
If you set the session status to Complete, a message appears when you save the changes, and the system updates:
Student training profiles.
The profiles show that the students enrolled in this session have completed this course.
Student profiles.
The system assigns the competencies and accomplishments that are defined on the Course Table - Prereqs, Goals page to the students who completed the course. The system updates students' profile of type PERSON. If the student doesn't have a profile of type PERSON, the system automatically creates a profile and assigns the course competencies and accomplishments.
If you set the session status to Cancel the system updates the student automatically and inserts the letter code of CAN (cancellation) so that you can generate letters notifying students of the session cancellation. You can create letter codes on the Standard Letter Table page.
Once you've set the Session Status field to Complete or Canceled, you can no longer use the course session during enrollment and rescheduling.
If any students are on a waiting list for a canceled or completed session, put the students back on the waiting list so that you can enroll them in other sessions.
If you have students with a status of Session Wait list, use the Create/Update Course Wait List page to add them to the waiting list.
Prerequisites When Using Profile Management Competencies and Accomplishments
When you have defined a course using competencies or accomplishments, the following configurations are required before you can set the session status to Complete:
Configure the application server for publish/subscribe.
Configure the integration broker and make it active.
Ensure that the:
The EOEN_MSG_CHNL queue is running.
The service operation EOEN_MSG is active.
The associated routing definitions are active.
Set up the Event Manager.
Make the event CourseSessionCompleted and the associated event handlers active. You should also enable logging for the event and handler.
See Also
Generating Student Form Letters
Planning and Setting Up Course Sessions
PeopleSoft HCM PeopleBook: Events and Notifications, “Setting Up Events”
PeopleTools 8.52: Integration Broker
PeopleTools 8.52: System and Server Administration
Recording Student Feedback
This section discusses how to:
Record general student feedback on course sessions.
(USF) Enter individual training evaluations.
Record specific student feedback.
Pages Used to Record Student Feedback|
Page Name |
Definition Name |
Navigation |
Usage |
|
COURSE_EVALUATNS |
Learning, Result Tracking, Evaluate Course Session, Evaluate Course Session |
Record student feedback on course sessions so that you know what areas need improvement. |
|
|
GVT_TRNREQ_SEC_CE1 |
Learning, Result Tracking, Individual Training Evaluation, Course Information |
Enter general information about the course, including the start and end date of the course session and the course hours. Indicate each employee's completion status, grade, and overall rating of the course. |
|
|
GVT_TRNREQ_SEC_CE2 |
Learning, Result Tracking, Individual Training Evaluation, Evaluation Data |
Record an employee's feedback about various areas of the course such as course materials, applicability of the course, and training facilities. |
|
|
GVT_TRNREQ_SEC_CE3 |
Learning, Result Tracking, Individual Training Evaluation, Comments |
Enter employee comments about strong or weak aspects of the training. Enter employee recommendations. |
Recording General Student Feedback on Course Sessions
Access the Evaluate Course Session page (Enterprise Learning, Result Tracking, Evaluate Course Session, Evaluate Course Session).
If you entered a facility and instructor in the Course Session table, the system displays the information here.
|
Session Average Rating |
Displays the overall average rating for the session. This is the average of the Average Rating values for all rating areas. |
Ratings Area
|
Rating Area |
Select from Content, Facility, Instructors, Materials, or Presentation. |
|
Average Rating |
Displays the average rating for the area. |
|
Total Count |
Displays the number of evaluations received for the rating area. This is the sum of the Total Count fields in the Ratings scroll area. |
Ratings
Use this scroll area to enter student evaluations of the specified rating area. Add a row for each rating level. For example, if four students evaluate the Content area of the course session, with three students giving a rating of Excellent and one student giving a rating of Good, you add one row to record the number of Excellent ratings and one row for the Good ratings.
|
Rating Points |
Displays the number of points associated with the rating you selected. The points associated with each rating are: 1: Excellent 2: Good 3: Fair 4: Poor |
|
Total Count |
Enter the number of students who gave each rating. |
(USF) Entering Individual Training Evaluations
Access the Individual Training Evaluation - Course Information page (Enterprise Learning, Result Tracking, Individual Training Evaluation, Course Information).
Federal users can enter detailed training evaluations for individual employees.
|
All Sessions Attended |
Select Yes or No. |
|
Comments |
Enter an optional explanation of the responses to the preceding fields. |
Actual Course Hours
|
Duty |
Enter the number of hours in training that are normally spent at work. |
|
Non-Duty |
Enter the number of hours spent in training or required for travel outside of duty hours. |
Recording Specific Employee Feedback
Access the Individual Training Evaluation - Evaluation Data page (Enterprise Learning, Result Tracking, Individual Training Evaluation, Evaluation Data).
|
Organization of Subject Matter |
Select Poorly organized, Adequate, or Well Organized. |
|
Suitability of Instr Materials (suitability of instructor's materials) |
Select Poorly suited, Adequate, or Well Suited. |
|
Level of Difficulty |
Select Appropriate, Too Advanced, or Too Elementary. |
|
Length of Course |
Select Appropriate, Too Long, or Too Short. |
|
Amt of Outside or Evening Work (amount of outside or evening work) |
Select Appropriate, Insufficient, or Too Much. |
|
Effectiveness of Instructors |
Select Excellent, Good, or Poor. |
|
Appl of Subject Matter to Work (applicability of subject matter to work) |
Select Insignificant, Adequate, or Significant. |
|
Facilities |
Select Excellent, Good, or Poor. |
|
Recommendations to Colleagues |
Select Highly Recommend or Not Recommend. |
|
Meet Career Development Plans |
Select No, Yes, or Not Applicable. |
Running Course Session Reports
This section discusses how to generate reports of scheduled course sessions.
Pages Used to Run Course Session Reports|
Page Name |
Definition Name |
Navigation |
Usage |
|
RUNCTL_TRN002 |
Learning, Course Reports, Course Session Roster, Course Session Roster |
Lists the course name, session number, session start date, and all students who are enrolled in a course. This is a Crystal report. |
|
|
RUNCTL_TRN004 |
Learning, Training Reports, Training Schedules, Training Schedules |
Lists course sessions that are scheduled within a given period. This is a Crystal report. |
|
|
RUNCTL_TRN005 |
Learning, Training Reports, Training Facility Schedules, Training Facility Schedules |
Lists course sessions scheduled at a training facility during a given period. Sessions are listed by course start date. This is a Crystal report. |
|
|
RUNCTL_TRN018 |
Learning, Course Reports, Attendance Status, Attendance Status |
Lists the attendance status of the students in a course. This is an SQR report. |
|
|
RUNCTL_TRN017 |
Learning, Course Reports, Course Rating, Course Rating |
Details ratings for sessions of a course. This is a Crystal report. |
|
|
RUNCTL_TRN019 |
Learning, Course Reports, Course Rating Templates, Course Rating Templates |
This evaluation template is completed by students enrolled in a course session. This is a Crystal report. |
|
|
RUNCTL_TRN022 |
Learning, Training Reports, Statistics of EEs Enrolled, Statistics of EEs Enrolled |
Lists the employees who are enrolled in courses and lists course statistics by company, location, and department. This is an SQR report. |
|
|
RUNCTL_TRN033 |
Learning, Training Reports, Training Instructor Schedules, Training Instructor Schedules |
Lists the courses that an instructor is scheduled to teach during a given period. This is a Crystal report. |
|
|
RUNCTL_TRN034 |
Learning, Training Reports, Equipment Checklist, Equipment Checklist |
Lists required equipment for a course session. For each item, the report shows the quantity required, the number available in the training room and facility, and the total number that is booked at the facility for a given period. This is an SQR report. |